Daytime

Products of Daytime

Daytime products for pets from the pet shop Zoo Roco AG

Daytime Basic Control to matrix

Basic Control BC16 1-channel for matrix & penix With the Basic Control you can simulate sunrise and sunset simulations with natural light conditions during the day and at night. Duration adjustable in 6 stages from 0-60 minutes - light control with excellent price-performance ratio. 3 switching times day - night - break simple operation and programming via 3 buttons and a status LED directly on the device separately adjustable brightness for daylight or nightlight Demonstration operation with constantly changing day and night light Manual dimming possible in real time internal 24-hour clock (with approx. 15 minutes power reserve) shapely and valuable housing with comfort control buttons "Plug & Play" control is simply plugged in between converter and luminaire, also later! Operation of luminaires of the daytime® line matrix or pendix with up to 240W (24 matrix LED modules)

CHF 139.90

Daytime Converter

Watt: max 12 watts

Daytime® Converter In order to commission a daytime® LED system, an LED converter is required. Our converters are protective low-voltage power supplies according to DIN 61347-2 for the operation of daytime® LED systems. The sum of the LED light output, the eco- and / or cluster lights connected to a converter must not exceed the converter rated power.

CHF 29.90

Daytime lightbar matrix

LED Daytime matrix: matrix 20.0

Modular LED system for aquariums The matrix light bars from daytime are the logical extension of the LED aquarium lights. The sum of all properties of this system sets new standards. The light bars are suitable for freshwater and saltwater aquaristics. Thanks to the modular system, the individual LED modules can be mounted independently in the light bar. This allows for the greatest possible individual lighting solution for your aquarium. Highend customizing - Module assembly by the aquarium owner various adapter sets for integration of the "matrix" on the aquarium Special LEDs for seawater aquaria "Royal Blue 440 - 455 nm" all aluminum components seawater resistant anodised (according to DIN81249-1) Bezeichnung(Grösse) Profillänge max. Modulanzahl matrix 20.0 16,6cm 1 St. - 10 Watt matrix 30.0 25cm 2 St. - 20 Watt matrix 40.0 35cm 3 St. - 30 Watt matrix 50.0 45cm 4 St. - 40 Watt matrix 60.0 55cm 5 St. - 50 Watt matrix 70.0 65cm 6 St. - 60 Watt matrix 80.0 75cm 7 St. - 70 Watt matrix 90.0 85cm 8 St. - 80 Watt matrix 100.0 95cm 9 St. - 90 Watt matrix 110.0 105cm 10 St. - 100 Watt matrix 120.0 115cm 12 St. - 120 Watt matrix 130.0 125cm 13 St. - 130 Watt matrix 140.0 135cm 14 St. - 140 Watt matrix 150.0 145cm 15 St. - 150 Watt matrix 160.0 155cm 16 St. - 160 Watt matrix 170.0 165cm 17 St. - 170 Watt matrix 180.0 175cm 18 St. - 180 Watt matrix 190.0 185cm 19 St. - 190 Watt matrix 200.0 195cm 20 St. - 200 Watt matrix 210.0 205cm 22 St. - 220 Watt matrix 220.0 215cm 23 St. - 230 Watt matrix 230.0 225cm 24 St. - 240 Watt matrix 240.0 235cm 24 St. - 240 Watt matrix 250.0 245cm 24 St. - 240 Watt matrix 260.0 255cm 24 St. - 240 Watt matrix 270.0 265cm 24 St. - 240 Watt matrix 280.0 275cm 24 St. - 240 Watt matrix 290.0 285cm 24 St. - 240 Watt matrix 300.0 295cm 24 St. - 240 Watt matrix 310.0 305cm 24 St. - 240 Watt matrix 320.0 315cm 24 St. - 240 Watt matrix 330.0 325cm 24 St. - 240 Watt matrix 340.0 335cm 24 St. - 240 Watt matrix 350.0 345cm 24 St. - 240 Watt matrix 360.0 355cm 24 St. - 240 Watt matrix 370.0 365cm 24 St. - 240 Watt matrix 380.0 375cm 24 St. - 240 Watt matrix 390.0 385cm 24 St. - 240 Watt matrix 400.0 395cm 24 St. - 240 Watt

CHF 159.90

Daytime Magnet holder set

matrix magnetic holder set For attachment to horizontal, magnetic surfaces - the optimum solution.Neodymium magnets with exceptional holding power enable the matrix luminaires to be mounted on magnetic surfaces. The holders can be moved in any lengthwise direction.For example for the Fluval Edge this adapter set offers an optimal mounting possibility.Note: The maximum holding power of the magnets is a technical parameter and is determined under optimal conditions. Painted steel surfaces and special alloys reduce the maximum holding power of the magnets. Max. Holding force 14kg (2 magnets)

CHF 39.90

Daytime Converter to matrix

Watt: 240 watts

LED converter to matrix The converter is the engine of every lighting. Different power levels between 40 and 240 watts are available for the daytime LED light. The distributor supplies 2 matrix LED luminaires with a converter at the same time. It is always important to ensure that the total power of the lights does not exceed the rated power of the converter used. The maximum allowable power is 240 watts (regardless of the number of occupied seats). Converter, distributor and LED light are safe to connect without tools via a plug-in system.Item No. rated capacity Art.-Nr. Nennleistung 41-0012 40 Watt 41-0013 60 Watt 41-0014 90 Watt 41-0015 120 Watt 41-0016 180 Watt 41-0017 240 Watt

Variants from CHF 99.90

CHF 264.90

Adapter profile for Juwel aquariums

Variant: 534mm / Trigon rear | Variant (1): 534mm / Trigon rear

Daytime Adapter-Profil für Juwel-Aquarien Die einfache und professionelle Lichtlösung für Ihr Aquarium von Juwel. Das JUWEL®-Adapterprofil ermöglicht es Ihnen ganz einfach auf daytime® LED-Beleuchtung umzusteigen. Entfernen Sie den Leuchtbalken inklusive der Halterung und ersetzen Sie ihn durch das Juwel®-Adapterprofil. Das Profil kann sowohl Leuchten der eco-Linie als auch cluster-Linie aufnehmen. Die original JUWEL® Klappendeckel können passgenau in das Adapterprofil eingesetzt werden. Die Verwendung 1 Der bestehende Leuchtbalken wird komplett entnommen und durch das daytime-Profil ersetzt. 2 Das Adapter-Profil ist optimal an die Gegebenheiten Juwel-Aquariums angepasst und kann zur Wartung und Pflege Ihres Beckens verschoben werden. 3 Mittig angeordnet, erstrahlt Ihr Aquarium mit daytime® bald in neuem Glanz. 4 Kein Schrauben und kein Bohren – und alles sitzt. Die vorhandenen Originalklappen können 1:1 weiterverwendet werden. Technische Details Hier finden Sie das passende Adapter-Profil für Ihr Aquarium von JUWEL®. Adapterprofil Profillänge JUWEL® Beckenbreite passend für JUWEL® Aquarium passende eco oder cluster JUWEL® 55 534 mm - Trigon 350 (hinten) 50.x JUWEL® 60 593 mm 61 cm Lido 120 60.x JUWEL® 70 693 mm 71 cm Lido 200 | Trigon 190 70.x JUWEL® 80 793 mm 81 cm Rio 125 80.x JUWEL® 90 903 mm 92 cm Vision 180 90.x JUWEL® 100 993 mm 101 cm Rio 180 | Trigon 350 (vorne) 100.x JUWEL® 120 1192 mm 121 cm Rio 240 | Rio 300 | Vision 260 120.x JUWEL® 150 1492 mm 151 cm Rio 400 | Vision 450 150.x

CHF 32.50

Daytime Light control - dimming module 1-channel

Daytime Lichtsteuerung Dimm-Modul 1-Kanal Manueller Handdimmer Einstellbarer Auto-Softstart „Sonnenaufgang“ (0 – 180 Sek.) 0(1) – 10V-Schnittstelle Für Aquariencomputer etablierter Hersteller Wird zwischen Converter und Leuchte gesteckt „Plug & Play“ (PnP) Inkl. Verbindungsleitung für GHL ProfiLux Aquariencomputer Varianten Lichtsteuerung Daytime: Die elektronische Ansteuerung und Regelung der eco erfolgt durch die Lichtsteuerung “Lighting Control LC14″ in der 1-Kanal-Ausführung. Die max. Belastbarkeit ist abgestimmt auf den leistungsstärksten Converter. Diese beträgt 100 Watt. Erhältliche Leistungs-Erweiterungs-Module “PEM14 1-Kanal” ermöglichen eine Leistungserhöhung um 100 Watt je Modul. Eine einzelne Lighting Control LC14 steuert bis zu 255 Erweiterungs-Module. Diese Lichtsteuerung kann auch nachträglich in bereits vorhandene daytime® LED-Beleuchtungssysteme der eco-Linie integriert werden. Ebenso kann das manuelle 1-Kanal daytime® Dimm-Modul durch die elektronische Variante LC14 1-Kanal ersetzt werden.

CHF 159.00

Daytime Distributor 3-way

Daytime Verteiler (3-fach) Ermöglicht den Anschluss von bis zu 3 eco- und/oder cluster-Leuchten an einen Converter bzw. einer Lichtsteuerung. Die Gesamtleistung der Leuchten darf die Converter-Nenn-Leistung nicht überschreiten.

CHF 21.90

Daytime distributor to matrix

2-way distributor to matrix With the distributor, up to 2 matrix LED lights can be supplied with a converter at the same time. It must always be ensured that the overall line of the luminaires does not exceed the rated power of the converter used.

CHF 99.90

Daytime T5-Adapter as Set

T5 adapter set To accommodate existing T5 lamp sockets (tube holders) The conversion of an aquarium with conventional light bars or covers for fluorescent tubes with a diameter of 16 mm (T5 standard) is done with this adapter set. The mounting elements can be adjusted in width and adapted to the lamp holder spacing.The matrix LED luminaires can be quickly and easily inserted into the existing tube holders (sockets). The matrix is not powered via the lampholders.The distance between the centre of the tube holder and the bottom edge of the matrix is 45 mm.The used aluminium alloy - typical for daytime® - corresponds to the seawater resistance according to DIN 81249-1. These adapters do not work in JUWEL® aquariums because the distance between the tube holders and the water surface is too small.Our adapter profiles are the optimum solution for JUWEL® aquariums.The dimension between the centre of the tube holder and the lower edge of the lamp is 45 mm.

CHF 34.90

Daytime matrix swing adapter set

matrix swing adapter set The optimal solution for open pools, for installation on pool edges, light output approx. 60mm above pool edge Shapely pads for open aquariums and terrariums. The mounting brackets can be adjusted in width and adapted to the pelvic width. Corrosion-resistant stainless steel elements ensure that the matrix luminaire can be easily moved. Maintenance work in the dark is now a thing of the past. According to the matrix luminaires, all selected materials are UV and corrosion resistant. The aluminum alloy used - typical of daytime® - corresponds to the sea water resistance according to DIN 81249-1.

CHF 39.10

Daytime Insertion / Screw-on Adapter Set

Matrix Insertion / Screw-on Adapter Set Compact adapter set with a variety of applications. Both hanging and standing use. In addition, provided with holes that allow the screwing on suitable surfaces. The fasteners can be adjusted in width and adapted to the pelvic width.According to the matrix luminaires, all selected materials are UV and corrosion resistant. The aluminum alloy used - typical of daytime® - corresponds to the sea water resistance according to DIN 81249-1.

CHF 29.30

Daytime Smart Control SC16 to matrix

Smart Control SC16 3-channel for matrix & pendix With the Smart Control SC 16 from daytime you can simulate sunrise and sunset, cloud & thunderstorms. This control system offers everything that is currently possible at the Martk. Load capacity: max. 240 watts (programming and control with smartphone or tablet possible) Sunrise, sunset, morning & evening red, noon lowering, etc. - Simulation natural lighting conditions and changes by up to 10 freely programmable switching or dimming times Safe and comfortable programming via smartphones and tablets with Android and iOS operating system Dimming with almost no "jumps" over the entire brightness course Individually adjustable light scenarios for every day or night time Clouds and Thunderstorms - Random Weather Simulation can be turned on or off for any time of the day or night. 3 intensity levels selectable Programming in tabular form - clear and compact Demonstration operation with constantly changing scenarios Manual changes of lighting conditions in real time via sliders "Slider" Cloud flight and lightning at the push of a button - manually triggered weather simulation Professional plug-in system Fa. Binder "Plug & Play" control is simply plugged in between converter and luminaire, even later! Operation of luminaires of daytime® lines matrix & pendix with up to 240W (24 matrix LED modules) Parallel operation and combination of luminaires of all daytime® lines with optionally available power expansion module SEM16 in the corresponding design Software update via app (only iOS) from the comfort of your home

CHF 459.90

Daytime matrix Cord suspension set

matrix Cord suspension set matrix rope suspension set Continuously height-adjustable stainless steel wire rope suspension High quality stainless steel wire rope suspension for free suspension of a matrix luminaire above the aquarium. The height of the lamp can be easily adjusted without tools. The length of the wire ropes is 2 metres.

CHF 57.90

Daytime T8-Adapter as Set

T8 adapter set To accommodate existing T8 lamp sockets (tube holders) The conversion of an aquarium with conventional light bars or covers for fluorescent tubes with a diameter of 26 mm (T8 standard) is done with this adapter set. The mounting elements can be adjusted in width and adapted to the lampholder spacing.The matrix LED luminaires can be quickly and easily inserted into the existing tube holders (sockets). The matrix is not powered via the lampholders.The distance between the centre of the tube holder and the bottom edge of the matrix is 45 mm.The used aluminium alloy - typical for daytime® - corresponds to the seawater resistance according to DIN 81249-1. These adapters do not work in JUWEL® aquariums because the distance between the tube holders and the water surface is too small.Our adapter profiles are the optimum solution for JUWEL® aquariums.The dimension between the centre of the tube holder and the lower edge of the lamp is 45 mm.

CHF 34.90

Manufacturer Navigation

Manufacturer A-Z

Daytime products for pets from the pet shop Zoo Roco AG