Y hose connectorA Y-shaped hose connector for the MonsoonThe Y hose connector can be used to connect more water hoses to the Monsoon. Easy installationAllows you to connect another nozzle

Monsoon Extension KitAn extension kit for the Exo Terra MonsoonThe extension kit adds 4 nozzles to your Monsoon for 6 nozzles in total.With Y connectionWater hose4 spray nozzles

Monsoon Extension NozzlesTwo extension nozzles for the Exo Terra MonsoonThe nozzles for the Monsoon can be used to extend the Monsoon across multiple terrariums. 2 spray nozzlesEasy to install and clean

Exo Terra tubeAn extension tube for the Exo Terra MonsoonThe Exo Terra Hose can be used to extend the existing Exo Terra Monsoon.Extension Hose 1.8 m long. Easy to install

Monsoon replacement filterA replacement filter for the Exa Terra MonsoonThe water filter prevents coarser particles from entering the nozzles and clogging the Monsoon. Easy to installPrevents clogging of the nozzlesCleans the water

Terra FanPrevents stuffy stagnant air and provides air circulation throughout the terrariumThe fan pulls the old air out with a transformer and with two fans, it gives new air in. This cycle provides optimal air circulation and prevents fogged windows. The fans are essential for animals such as chameleons that need good ventilation.Prevents fogged windows due to stuffy airProvides optimal air circulation

2 Spray NozzlesThe spray nozzle unit of Repti Planet, can be rotated 360° and directed in any direction. Installation positions of the spray nozzle unit: it is recommended to install the spray nozzle unit on the glass at the side and at the back of the terarium.Best to use with one of the Repti Planet Fogger

Adjustable high-pressure misting systemSimulates the rainforest environment and humidity in a terrarium.Using the timer and flow controller on the top of the main unit, you can adjust the spray time and mist output. Switching on and off can be done at any time using the remote control (not included). The misting system can also be used as a rain system to simulate a rainforest environment, thanks to the high pressure.The unique shock-absorbent design provides a relatively silent operating environment.In a Misting System Heavy Rain package is:5 m black pipeMains adapterHose cutterCopper filter hose attachmentEnd cap2 spray nozzle components included, but up to 20 spray nozzles can be connected for simultaneous operation.Main unitWater canister

Fogger with timerThe Fogger has a timer for repeated periodic humidification. It can also be used with the humidity controller when constant humidity is required. The canister is equipped with a water supply function to facilitate water supply and dirt removal, which can prevent the growth of bacteria.The open lid design allows water to enter the canister directly when the lid is closed. The large-capacity, transparent 4 liter canister can always provide long-term, continuous humidification, provided there is enough water in the canister.The control panel has electronic touch technology with sensitive buttons, which enables a quick response. The display is equipped with LED technology, which ensures low power consumption and a long service life.The unit is very quiet. The amount of mist can be adjusted in three levels and the power is automatically switched off when there is a lack of water, which makes the unit very safe and reliable.The blower has a quick release feature for easy access, maintenance and service. The air inlet uses a high-permeability activated carbon filter sponge to effectively improve air quality.Press and hold the mist button to activate the sleep mode and press any button to exit the mode. Operation is simple and user-friendly.Adjustable 3-stage foggingEasy to read LED displayAutomatic low water protectionBuilt-in digital timerEasy to fill; easy to cleanCompatible with humidity controllerUnique flexible and adjustable hose designIn a Fogger digital timer package is:Main motorThe water tankLidFlexibleHoseSuction cupsInstruction manualTechnical data:Product dimensions: 200 x 162 x 277 mmInput voltage: 100-240V~ 50/60HzPower: Max.25WFog output: Max.300ml/hCT control range: 0~4 hoursWT control range: 2~120 minutesNoise: ≤35 decibels

Maxi Fogger and Humidifier AccessoriesSpare part or extension for the Fogger and Humidifier A useful accessory for the Fogger and Humidifier from Repti Planet. This accessory allows the Maxi Fogger to spray in two different directions, thanks to the adapter splitter. It makes sense to spray in two different directions if you have a large terrarium, or if you have two terrariums and want to humidify both.  The parts can also be used as spare parts in case the extension tube or the suction cups break.Allows spraying in two directionsCan be used as spare partsIn an accessories package is:One adapter splitter    One extension tube

Maxi Fogger and humidifierThe compact Fogger & humidifier Maxi is ideal for pets that require a humid environment. Adjustable fogging output (up to 250 ml per hour). Flexible adjustable hose from 45 cm to 150 cm length. Dry run protection, switches off the unit when the tank is empty. Compatible with a wide range of enclosures including vivariums, tanks, cages, terrariums, aquariums, plastic/PVC/acrylic/glass containers.Perfect for a variety of reptiles and amphibians including bearded dragons, geckos, snakes, turtles, iguanas, lizards, chameleons, frogs, crabs, etc.Description of the Fogger & HumidifierRemove all packaging. Place the humidifier base (A) in an accessible place next to your terrarium or inside the area.Before use, unscrew the valve on the black base of the humidifier container (B) and rinse the container with a small amount of soap. Rinse it well until no more soapy water comes out when rinsing.Fill the humidifier container (B) with up to 2 litres of water. Tighten the valve again.Place the humidifier tank (B) on the base (A). Check carefully that the humidifier tank is installed correctly on the base.Plug the larger end of the extendable hose (C) onto the black neck of the humidifier tank.Extend the hose (C) and place the end in/on the top or side of the terrarium. Slide the suction cups down the hose and stick them to the side of the terrarium.Connect the unit. Turn on the switch on the back of the humidifier base (A). Set the control on the front of the unit to the desired output. It may take a few seconds for the output to increase/decrease after adjusting the control.In a fogger and humidifier is:Main unitExtension hoseConnectorTank capSuction cupsWater tankTechnical data:    Maximum power: 32W    Voltage: 220V    Frequency: 50Hz    Maximum capacity: 2,2l    Maximum output 250ml/hInstalling the Fogger and Humidifier MaxiPlace the humidifier horizontally in a suitable place, remove the water tank, unscrew the lid of the water tank and fill it with water. The water temperature must not exceed 40 °C. After filling the water tank completely, remove the water drops and then reattach it to the main unit.Attach the tank cap to the upper part of the water tank. Connect the connector to the water tank lid.Connect the flexible hose to the connector.Attach the suction cups on the glass to flexible hose and adjust the appropriate length of flexible hose.Attach the suction cups to the side or back of the terrarium and point the outlet of the flexible tube towards the inside of the terrarium. Bend the extension tube as little as possible. Damage to the extension tube may result in faulty fogging.Connect the unit to the mains (220/50 Hz) and set the switch on the main unit to the "On" position.Turn the fog output adjustment knob and adjust the fog output according to your needs.The unit is equipped with a low-water cut-out. When the water tank is empty, the sensor switches off the fan and the transformer. As a result, no mist comes out of the flexible hose and the indicator light lights up red. If you want to continue operation, switch off the power and fill the tank with water again.Caution: Do not pour hot water above 40 °C into the water tank to avoid deforming the motor unit. Do not pour water directly into the water tank when the tank is installed on the main unit. Do not pour metal products, chemicals and detergents into the tank.Remove the water from the tank when the ambient temperature is below 0 °C. This could cause frost, which could damage the unit.Do not move the unit while it is in operation. If the appliance is not used for a long time, switch it off and disconnect it from the mains supply

Repti Fogger Terrarium HumidifierImprove the humidity of your terrarium and turn it into a tropical rainforest, with the Zoo Med Repti Fogger, a compact ultrasonic humidifier with adjustable fogging power. This unit is supplied ready to use. It contains a one-litre bottle, an adjustable hose up to 25 - 81 cm long and all necessary connections. The Repti Fogger also has a "no-spill" valve that makes it easy to remove and refill the water bottle.Use the Repti Fogger with the HygroTherm, which must be purchased separately.For small terrariumsVisual fogging effectImproves humidity and temperature for your reptilesPrevents stooling of young turtles1 litre bottle with anti-drip valve included for easy refilling Excellent for species of tropical and rainforest reptiles and amphibians such as:Chameleons and anolesAmphibians and tree climbing frogsTropical geckos, day geckos and crown geckosForest tortoises e.g. red-footed and yellow-footed tortoises and articulated tortoisesCanned turtlesHermit crabs

Lucky Reptile Sprayer The Lucky Reptile Sprayers are high-quality pump and hand sprayers. The hand sprayers have an adjustable spray head to spread the finest spray mist. Ideal for spraying terrariums.1.5lRefillableAdjustable spray head

Repti Rainforest The Repti Rainforest Sprinkler System is a complete starter kit to equip your terrarium with an automatic watering system.The kit contains1 transformer, 12 volts.3 Adjustable nozzles for mounting on the terrarium.1 water tank.1 water filter. Prevents the nozzles from clogging with dirt.7 metre black water hose. Prevents algae from forming in the hose. 1 multiway distributor for hose connection of up to 3 nozzles. 4 blind plugs 6 bolts1 high-pressure diaphragm pump.

Trixie Thermo-/Hygrometer – analogueThis analogue thermo-/hygrometer has a measuring range from -25 °C to 55 °Cand a humidity measurement from 0% to 100%.Easy to attach with adhesive strips on the back.Size: Ø 7.5 cm

Trixie analogue Thermometer This analogue thermo-/hygrometer has a measuring range from -20 °C to 50 °CEasy to attach with adhesive strips on the back.Size: Ø 5 cm

HeatStrip II from SolarRaptorWith the HeatStrip from SolarRaptor, a warm breeze blows through your terrarium - putting an end to misted-up windows.Easy installation due to self-adhesive backingAir warmer/window heaterNo more misted up windowsPrevents cold draughtsThe problem of draughts in terrariums is often underestimated: especially with large ventilation areas, it can quickly become too draughty for the animals because colder air is constantly flowing in. Then they only stay directly under the heaters and are thus restricted in their natural behaviour. In the worst cases, this can even lead to respiratory diseases.The SolarRaptor HeatStrip II is a unique heating system. Terrarium owners usually mount the self-adhesive rod directly on the front air inlet of their terrarium. This heats the incoming air and increases the air temperature in the entire terrarium. In addition, the so-called "chimney effect" ensures an overall improved air exchange.The Heatstrip thus ensures a constant supply of fresh and warm air and improves the climate for both the animals and the plants in the terrarium.For owners of a rainforest terrarium, the HeatStrip has another advantage: Rainforest terrariums have high humidity, which is usually produced with the help of sprinkler systems or ultrasonic foggers, so the windows often mist up. This is not only unpleasant for the animals, but also a nuisance for the reptile or amphibian keeper. As the heat source of the HeatStrip is located directly on the front pane, condensation of humidity on the pane is effectively counteracted. This means no misted-up windows and thus always a clear view of the animals.Please note: A DRV power supply unit is required for operation - please order separately.Variants:450mm / 8 Watt750mm / 12 Watt950mm / 16 Watt

DRV power supply unit 24 Watt for all HeatStripThe SolarStinger/SolarRaptor DRV2s are universal drivers (power supplies). They can be used to operate SolarRaptor products with a 6-pin connection.They can be combined with the products quickly and easily using the practical plug connections. It is also possible to connect several products via a DRV Y-cable or the control unit CON1 to only one DRV2 of corresponding size.Important when coupling several units:The sum of the power consumption (total wattage) of all connected products must not exceed the maximum output power (watts) of the DRV2 power supply unit!Calculation example:To operate TWO SolarStinger SunStrip III 35 FRESH with 19 watts each, together with ONE CON1 control unit (1 watt), a DRV2 48 W is required

Exo Terra Monsoon Multi 2 A Rain system for large terrariums and greenhouses. With an easy-to-use timer, you can easily set individual rain cycles. Through two flexible sprayers the rain lands where you want it. With separately sold extra sprayers the Monsoon Multi 2 can handle up to 6 sprayers, which can be used to irrigate multiple terrariums. Refills can be skipped for some days because of the Monsoons 8L Water tank. With its small size of 22 cm (B) x 22 cm (T) x 33 cm (H) the rain system can be easily hidden. And it is just as easily to install through its easy to install hoses which fit through closeable hose canals in to your Terrarium (hose canals are available on every Exo Terra glass terrarium). Because of a slated top it is easy to refill the tank completely waterproof. This second version of the Monsoon comes with a stronger pump which can deliver up to 4.5 bar water pressure, a new pressure proof polyether-hose and new leakproof joints. The Exo Terra Monsoon Multi rain system consists of the following components: - Exo Terra Monsoon Multi 2 system- 2 sprayers and hose (expendable to 6 sprayers)- 2 replacement sprayers- 1 Y-connector for sprayers - water filter- Intake hose- Power adapter- Understandable and extensive Manual For smaller terrariums you can use the Exo Terra Monsoon Solo 2.

Digital Thermo/Hygrometer range from 0 °C to 50 °C (32 °F to 122 °F) and 30 % to 90 % humidity easy to mount with suction pad

Repticare Heizkabel - 7m langes Heizkabel für Terrarien für Terrarien kann um Äste gewickelt oder unter dem Terrarienbodengrund angelegt werden extra dünn wasserdicht die ersten 2m sind nicht beheizt S = Leistung: 15 Watt - Länge: 3.5m M = Leistung: 50 Watt - Länge: 7m Das Kabel kann im Terrarium um Äste gewickelt werden oder unter dem Terrarium-Bodengrund ausgelegt werden. Es ist extra dünn verarbeitet und wasserdicht. Die ersten 2 Meter des Kabels sind nicht beheizt und dienen somit als Führung.

Adapter Schweiz-Europa (3-polig) Ein praktischer Adapter zum Anschluss aller elektrischer Geräte mit und ohne geerdetem Stecksystem in der Schweiz. Belastbarkeit bis 10A7250V Watt. Sicherung: 10A/250V (5x20) Geeignet für alle EU Schukostecker in Ländern mit Schutzkontakt-Steckssystem wie z.B. D, F, B, CZ, PL, NL, E, P, S, FI, N, GR, TR und A.Max.

The Lucky Reptile Humidity Control II is a digital device which fulfills all wishes and that at a price not seen before. digital two time zones realtime clock is included The humidity setting can be chosen between 1% and 99% The Humidity Control II is a digital device which fulfills all wishes and that at a price not seen before.It has two time zones which enable to make different settings for day and night. A realtime clock is included which allows switching between day and night mode by time which can be defined as desired. In addition a timer is integrated which can have two ON/OFF settings by realtime clock. The minimum time period for the timer is one minute.Other features are an alarm function (visual and sound), switching between humdifying and de-humidifying e.g. for use with fans and the possibility to influence the switching of the humidity control. E.g. you can set a value of 15 which means that the humidifier will only start working if the measured humidity is at least 15% below the desired setting (if the setting is 70%, it will not start before reaching 55%). This can make sense to prevent the humidifier to turn on and off in quick cycles. The humidity also varies in nature after all.Devices to be controlled are installed through a coupling with two sockets. The maximum load is 1000W. The display constantly shows the measured humidity.The humidity setting can be chosen between 1% and 99%.

Trixie Reptile Rain Sprinkler System - For rainforest terrariums or plant terrariums pump pressure infinitely adjustable filter for water supply taken directly from the terrarium special mounting elements for secure attachment of spray heads extendable with extra spray heads low voltage system for maximum safety also suitable for watering plants