Aquarium plants for society aquariums
Vesicularia sp.
CHF 12.90
Vesicularia sp. – In vitro plant, 6 cm potVesicularia sp. are mosses that form large, dense mats and grow over decorations, stones and roots. They reproduce by division of the plant. They are easy to care for and are recommended for humid terrariums and aquariums. Supplied as an in vitro plant.
Key featuresDifficulty level: easyLight requirement: low to mediumCO₂ requirement: lowFinal height: up to 10 cmGrowth rate: low to mediumTemperature: 18–28 °CPlacement in the aquarium: on decorationsOrigin: South-East AsiaCup size: 6 cm diameter
Mosses are unique yet low-maintenance plants. Compared to traditional aquarium plants, they differ significantly in appearance. They have no true roots, and their stems and leaves are greatly reduced. They grow in the form of green mats that attach to various surfaces in the aquarium.
Vesicularia spreads by creeping over decorative elements and the substrate. With regular trimming and appropriate shaping, it quickly forms a dense, green carpet. The moss should be attached to a decorative element, for example with cotton thread, thin fishing line or special plant glue.This plant has virtually no special requirements regarding water parameters. It grows well under almost all conditions; water hardness, pH value and lighting can be largely arbitrary. CO₂ supplementation is not required either. Propagation is by dividing the plant into smaller pieces. Pruning and shaping are well tolerated and promote attractive, dense growth.In vitro cultures are free from:BacteriaFungiAlgaeannoying snails
Ludwigia ovalis Invitro aquarium plant
CHF 6.50
Ludwigia ovalis invitro cup
This plant, with a characteristic oval leaf
oval leaf shape in orange-pink color, is easy to grow and an interesting addition to the aquarium.
interesting addition to the aquarium. The leaves are slightly smaller
than those of the popular Repens variety. Due to their rapid growth
the clumps must be trimmed and thinned out regularly to prevent excessive growth.
prevent excessive growth. The original shape of the leaf blade
makes it an attractive addition to the plant composition in the aquarium.
aquarium.To use this plant, remove it from the cup and rinse the gel.
cup and rinse the gel thoroughly under running water.
Then divide it into small clumps of 1-2 cm and plant them at short intervals.
them at short intervals. As it grows, it will form a
form a uniform group of adult plants.This plant
comes from in vitro cultivation and is free from snails, parasites and algae.
and algae. High-quality gel was used as a medium, so it will establish itself
quickly establish itself in the aquarium.
Light requirement: medium to intensive
Optimum temperature: 10 to 28 °C
Water values: soft to hard
pH value: 4 to 7
CO2 and nutrients: recommended
Propagation: cuttings
Ludwigia ovalis Invitro aquarium plant
CHF 16.90
Ludwigia ovalis invitro cup
This plant, with a characteristic oval leaf
oval leaf shape in orange-pink color, is easy to grow and an interesting addition to the aquarium.
interesting addition to the aquarium. The leaves are slightly smaller
than those of the popular Repens variety. Due to their rapid growth
the clumps must be trimmed and thinned out regularly to prevent excessive growth.
prevent excessive growth. The original shape of the leaf blade
makes it an attractive addition to the plant composition in the aquarium.
aquarium.To use this plant, remove it from the cup and rinse the gel.
cup and rinse the gel thoroughly under running water.
Then divide it into small clumps of 1-2 cm and plant them at short intervals.
them at short intervals. As it grows, it will form a
form a uniform group of adult plants.This plant
comes from in vitro cultivation and is free from snails, parasites and algae.
and algae. High-quality gel was used as a medium, so it will establish itself
quickly establish itself in the aquarium.
Light requirement: medium to intensive
Optimum temperature: 10 to 28 °C
Water values: soft to hard
pH value: 4 to 7
CO2 and nutrients: recommended
Propagation: cuttings
Ludwigia ovalis Invitro aquarium plant
CHF 16.90
Ludwigia ovalis invitro cup
This plant, with a characteristic oval leaf
oval leaf shape in orange-pink color, is easy to grow and an interesting addition to the aquarium.
interesting addition to the aquarium. The leaves are slightly smaller
than those of the popular Repens variety. Due to their rapid growth
the clumps must be trimmed and thinned out regularly to prevent excessive growth.
prevent excessive growth. The original shape of the leaf blade
makes it an attractive addition to the plant composition in the aquarium.
aquarium.To use this plant, remove it from the cup and rinse the gel.
cup and rinse the gel thoroughly under running water.
Then divide it into small clumps of 1-2 cm and plant them at short intervals.
them at short intervals. As it grows, it will form a
form a uniform group of adult plants.This plant
comes from in vitro cultivation and is free from snails, parasites and algae.
and algae. High-quality gel was used as a medium, so it will establish itself
quickly establish itself in the aquarium.
Light requirement: medium to intensive
Optimum temperature: 10 to 28 °C
Water values: soft to hard
pH value: 4 to 7
CO2 and nutrients: recommended
Propagation: cuttings
Sagittaria subulata
CHF 6.50
Saggitaria subulata - InVitro
Sagittaria subulata is a versatile and easy-care aquarium plant that creates a harmonious overall picture both in the foreground and in the middle ground. With its narrow, grass-like leaves, it forms dense, natural carpets and brings lively structure to any aquarium.
Under optimal conditions, the plant spreads via runners and quickly creates a dense growth. Depending on the placement and light conditions, it can vary its growth height - from low ground cover to taller, decorative accents in the background.
The occasional flowering is particularly attractive in optimal conditions: Delicate, small flowers can appear above the surface of the water, adding an unusual touch to the aquarium.
Advantages at a glance:
Undemanding aquatic plant for beginners and professionals
Forms dense lawns through natural runners
Flexible growth height depending on location and care
Can develop decorative flowers above the water surface
Supplied free from snails, algae and parasites Product details:
Name: Sagittaria subulataPlanting location: Foreground - middle groundOrigin: South America Growth: FastHeight: Up to 30 cm, depending on conditionsLight requirement: Medium to high
CO₂ supply: not essential, but beneficial
Propagation: by stolons, divisionDelivery form: InVitro (sterile packaging) Manufacturer: Aqua art
.jpg "Ludwigia ovalis in vitro cup")
Ludwigia ovalis Invitro aquarium plant
CHF 6.50
Ludwigia ovalis invitro cup
This plant, with a characteristic oval leaf
oval leaf shape in orange-pink color, is easy to grow and an interesting addition to the aquarium.
interesting addition to the aquarium. The leaves are slightly smaller
than those of the popular Repens variety. Due to their rapid growth
the clumps must be trimmed and thinned out regularly to prevent excessive growth.
prevent excessive growth. The original shape of the leaf blade
makes it an attractive addition to the plant composition in the aquarium.
aquarium.To use this plant, remove it from the cup and rinse the gel.
cup and rinse the gel thoroughly under running water.
Then divide it into small clumps of 1-2 cm and plant them at short intervals.
them at short intervals. As it grows, it will form a
form a uniform group of adult plants.This plant
comes from in vitro cultivation and is free from snails, parasites and algae.
and algae. High-quality gel was used as a medium, so it will establish itself
quickly establish itself in the aquarium.
Light requirement: medium to intensive
Optimum temperature: 10 to 28 °C
Water values: soft to hard
pH value: 4 to 7
CO2 and nutrients: recommended
Propagation: cuttings
Proserpinaca palustris
CHF 6.50
🌿 Proserpinaca palustris - Decorative aquarium plant with serrated foliage
Structure and color for the middle to background layout
Proserpinaca palustris from Aqua Art is an unusual aquarium plant with finely toothed, fern-like leaves that can take on a fascinating copper-orange coloration in good light. It grows upright and gives the aquascape a special depth effect and structure thanks to its unique texture.
In well-lit tanks with a CO₂ supply, it develops vibrant colors and healthy growth. Its eye-catching appearance makes it ideal as an accent plant in the middle or background.
✅ Advantages at a glance
Unique leaf shape with serrated foliage
Color gradient from green to copper-orange in strong light
Ideal for structured middle and background design
Demanding, but very decorative under optimal conditions
Grown in vitro - free from snails and pesticides
Particularly striking in layouts with contrasting plants
📋 Product details
Name: Proserpinaca palustris
Origin: North and South America
Type: Stem plant
Growth height: approx. 20-40 cm
Light requirement: medium to high
CO₂ supply: recommended to necessary
Growth: medium
Propagation: Cuttings after pruning
Delivery form: In vitro cup (sterile)
Manufacturer: Aqua Art
💡 Zoo Roco tip
Proserpinaca palustris looks particularly impressive when planted in groups and combined with fine-leaved plants such as Myriophyllum or Rotala. Strong light and regular micronutrient fertilization are crucial for intensive colouring.
With Proserpinaca palustris from Aqua Art, you can add variety, color and structure to your aquascape - ideal for sophisticated layouts with character.Customers also searched for: Proserpinaca palustris, Aqua Art, structure-rich aquarium plant, stem plant aquarium, serrated leaves, InVitro plant aquarium, aquascaping plant, buy Proserpinaca, reddish aquarium plant, background plant aquarium
Eleocharis parvula Mini
CHF 6.50
🌱 Eleocharis parvula 'Mini' - Fine grass carpet for the foreground
Ultra-compact ground cover for detailed aquascapes
Eleocharis parvula 'Mini' from Aqua Art is a particularly low-growing variant of the well-known turf grass plant. It is ideal for nano aquariums and natural aquariums where a fine, even grass lawn is desired in the foreground. Due to its low height, the view of other design elements such as stones or wood is retained - ideal for modern Iwagumi layouts.
As an in vitro plant, it is free from algae, pesticides and snails, making it ideal for sensitive aquarium inhabitants such as shrimps.
✅ Advantages at a glance
Particularly compact & low growth
Ideal for nano aquariums and foreground layouts
Forms a dense, light green carpet of grass
InVitro - sterile & shrimp-safe
Easy to care for with CO₂ and light supply
Perfect for Iwagumi and natural aquariums
📋 Product details
Name: Eleocharis parvula 'Mini'
Type: Ground cover / foreground plant
Growth height: approx. 2-5 cm
Light requirement: medium to high
CO₂ supply: recommended
Growth: medium
Propagation: via runners
Delivery form: In vitro cup (sterile)
Manufacturer: Aqua Art
💡 Zoo Roco tip
Divide the in-vitro cup into small portions and place them in nutrient-rich soil at regular intervals - this way Eleocharis 'Mini' grows together to form a dense, natural-looking carpet. Ideal in combination with light-colored substrates or high-contrast hardscapes.
With Eleocharis parvula 'Mini' from Aqua Art, you can design the foreground of your aquarium precisely, naturally and richly detailed - perfect for creative aquascaping concepts.Customers also searched for: ground cover aquarium, foreground plant, InVitro plant, Aqua Art, grass carpet aquarium, aquascaping foreground, nano aquarium plants, CO₂ plants aquarium, fine aquarium plant
Hygrophila sp. Araguaia
CHF 6.50
🌿 Hygrophila sp. 'Araguaia' InVitro Reddish-brown accent plant with unique growth habit
Hygrophila sp. 'Araguaia' from Aqua Art is a particularly attractive, compact stem plant with a reddish-bronze color and finely branched growth. It is ideal for the foreground to midground and provides structured contrasts and warm color accents in aquascapes.
This plant is one of the slow-growing Hygrophila species and can be easily shaped and thickened by regular pruning. Supplied as an in-vitro plant, it is free from algae, snails and pesticides - ideal for shrimp tanks and sensitive aquariums.✅ Advantages at a glance:
Compact Hygrophila with reddish-bronze leaves
InVitro - sterile, snail-free & pesticide-free
Ideal for the foreground or middle ground
Slow-growing - easy to shape and grow bushy
Good effect with strong lighting & CO₂ supply
Very decorative in natural aquariums and layouts with contrasting colors📋 Product details:
Name: Hygrophila sp. 'Araguaia'
Type: Stem plant
Placement: Foreground to midground
Growth height: approx. 5-15 cm
Light requirement: medium to high
CO₂ supply: recommended
Growth: slow
Delivery form: In vitro cup (sterile cultivated)
Manufacturer: Aqua Art💡 Zoo Roco tip:
Combine Hygrophila 'Araguaia' with light green plants such as Micranthemum or Hydrocotyle sp. 'Japan'
- to show off the darker coloring particularly well. For a
dense carpet, regular pruning is recommended.Hygrophila 'Araguaia' provides subtle color accents and fine structure in the lower section of the aquarium - ideal for sophisticated layouts and harmonious plant design.
Ludwigia sphaerocarpa Pilosa
CHF 6.50
Ludwigia sphaerocarpa 'Pilosa' InVitro Red accent plant for aquascaping
Ludwigia sphaerocarpa 'Pilosa' is a decorative and rare stem plant with a particularly intense red coloration and fine leaf structure - a real eye-catcher for any natural aquarium. This variety is ideal for the mid to background area and adds color depth and contrast to groups of green plants.
As an Aqua Art in vitro plant, it is free from snails, algae and pesticides, making it perfect for shrimp tanks and sensitive aquariums. With good lighting and CO₂ supply, it develops its full color intensity and grows vigorously but controllably.✅ Advantages at a glance:
Intensely red-colored stem plant with a fine texture
Grown in vitro - sterile, free from harmful substances
Ideal for color contrasts in the middle or background
Safe for shrimps and sensitive aquariums
Grows compact & controllable with good care📋 Product details:
Name: Ludwigia sphaerocarpa 'Pilosa'
Type: Stem plant
Placement: Middle to background
Growth height: approx. 20-40 cm
Light requirement: medium to high
CO₂ supply: recommended
Color effect: red to reddish-green
Growth: medium
Delivery form: In vitro cup (sterile cultivation)
Manufacturer: Aqua Art💡 Zoo Roco tip:
For strong red coloration, the plant should be kept under intensive lighting and regularly supplied with iron and micronutrients. A good supply of CO₂ also has a positive effect on growth and color.Ludwigia sphaerocarpa 'Pilosa' from Aqua Art brings structure, contrast and an intense play of colors to the aquarium - perfect for modern aquascaping layouts.
Eleocharis pusilla
CHF 6.50
Eleocharis pusilla InVitroDelicate ground cover for nano and natural aquariums
Eleocharis pusilla from Aqua Art is a delicate, grass-like ground cover that looks particularly elegant in nano aquariums and delicate aquascapes. It grows significantly lower and finer than Eleocharis acicularis and forms dense, short grassy areas with a natural appearance.
Thanks to in vitro cultivation, Eleocharis pusilla is free from pesticides, algae and snails, making it ideal for shrimp tanks and sensitive aquariums. The plant grows compactly, requires little care and spreads evenly through runners.✅ Advantages at a glance:
Very fine ground cover with short, dense growth
InVitro - sterile, shrimp-safe & pesticide-free
Ideal for nano aquariums & detailed layouts
Spreads through runners to form a carpet of grass
Easy to care for - requires only medium light conditions
Perfect for the foreground in aquascaping📋 Product details:
Name: Eleocharis pusilla
Type: Ground cover / foreground plant
Growth height: approx. 3-5 cm
Growth habit: grass-like, creeping
Light requirement: medium to high
CO₂ supply: recommended, but not essential
Growth: slow to medium
Propagation: by stolons
Delivery form: In vitro cup (sterile cultivation)
Manufacturer: Aqua Art💡 Zoo Roco tip:
Divide the InVitro cup into small portions and place them in nutrient-rich soil with some space between them. This will create a dense, natural carpet of grass in just a few weeks. Ideal in combination with stones or root wood!Eleocharis pusilla is the perfect choice for detail-loving aquarium designers who value naturalness, delicacy and structure - even in small tanks.
Bucephalandra sp. Ulysses
CHF 16.50
🌿 Bucephalandra sp. 'Ulysses' InVitro Noble perennial plant with character
Bucephalandra sp. 'Ulysses' from Aqua Art is an exclusive, slow-growing aquarium plant that impresses with its dark green to bluish shimmering leaves with slightly wavy edges. This variant is ideal for attaching to roots, stones or decorative elements - without planting in the substrate.
Thanks to in vitro cultivation, it is free from snails, algae and pesticides - ideal for shrimp tanks, nano aquariums and natural aquariums. The plant is robust, easy to care for and decorative - even in low light and without a CO₂ supply.✅ Advantages at a glance:
Staking plant with wavy, dark green leaves
InVitro - sterile, pesticide-free and snail-free
Slow-growing, very easy to care for
Perfect for shrimp tanks, aquascapes and small aquariums
No substrate required - ideal for roots or stones
Eye-catching leaf structure with an elegant shimmer📋 Product details:
Name: Bucephalandra sp. 'Ulysses'
Type: Perennial plant
Placement: Foreground to midground
Growth height: approx. 5-10 cm
Light requirement: low to medium
CO₂ supply: not essential, but beneficial
Growth: slow
Delivery form: In vitro cup (sterile cultivated)
Manufacturer: Aqua Art💡 Zoo Roco tip:
Place Bucephalandra 'Ulysses' on dark hardscape such as lava rock or bogwood - this will show off the shimmering leaves particularly well. Plant glue or a fine nylon thread is suitable for attaching them.With its unique color effect, low requirements and high decorative quality, Bucephalandra 'Ulysses' is the perfect plant for modern aquarium layouts.
Rotala rotundifolia Invitro
CHF 6.50
Invitro aquarium plant Rotala rotundifoliaColorful stem plant for the background
Rotala rotundifolia is one of the most popular stem plants in the aquarium hobby - versatile, easy to care for and particularly attractive thanks to its delicate, round leaves. Depending on the light intensity and nutrient supply, it develops a vibrant green to bright red, adding lively color accents to any aquarium layout.
The in vitro version is grown under sterile conditions and is therefore free from algae, snails and pesticides - ideal for sensitive aquariums, especially shrimp tanks. Fast-growing and adaptable, Rotala rotundifolia is ideal for the mid to background and harmonizes wonderfully with other fine stem plants in the natural aquarium.
Advantages at a glance:
✅ Changes color depending on the light - from green to red
✅ Fast-growing & ideal for dense groups of plants
✅ InVitro - guaranteed free from harmful substances & snails
✅ Safe for shrimps & sensitive tanks
✅ Perfect for aquascaping & classic plant aquariumsProduct details:
Name: Rotala rotundifolia
Type: Stem plant
Position in aquarium: Middle to background
Growth height: approx. 30-50 cm
Light requirement: Medium to high
CO₂ supply: Recommended for more intense colorationTemperature: 22 - 28°C
Delivery form: In vitro cup (grown sterile)
Color effect: Green to reddish, depending on light & nutrients
Bacopa myriophylloides Invitro
CHF 6.50
Invitro aquarium plant Bacopa myriophylloidesDelicate aquarium plant for the background
Bacopa myriophylloides is an elegant stem plant with delicate, finely pinnate leaves - a real eye-catcher for the background of your aquarium. Its special structure brings lightness and movement to the layout and is ideal for aquascaping and natural aquariums.
As a high-quality in vitro plant, it is free from algae, snails and pesticides, making it particularly safe for shrimps and sensitive tanks. With good lighting and CO₂ supply, Bacopa myriophylloides grows compactly and healthily - with a beautiful, delicate appearance.
Advantages at a glance:
✅ Delicate stem plant with feathery leaves
✅ Ideal for the background & textured layouts
✅ InVitro - sterile, pesticide-free & shrimp-safe
✅ Healthy growth with light & CO₂ addition
✅ Perfect for aquascaping & natural aquariumsProduct details:
Name: Bacopa myriophylloides
Type: Stem plant
Location in the aquarium: Background
Growth height: approx. 30-50 cm
Light requirement: Medium to high
CO₂ supply: Recommended
Delivery form: In vitro cup (grown sterile)
Special feature: Very fine, decorative leaf structure
Salvinia auriculata (Salvinia auriculata)
CHF 6.90
Salvinia auriculataSalvinia Auriculata (Brazilian salvinia) is a floating plant native to South America. It grows moderately quickly so that its population can be controlled. Easy to grow. Absorbs nitrogen to combat algae. Propagates by spreading.Difficulty of cultivation: easy to mediumLight requirement: medium to highCO₂ requirement: lowHeight of the adult plant: 0.5 cmGrowth: moderate to fastTemperature: 22 - 24°CPlacement in the aquarium: SurfaceOrigin: South and Central AmericaCup diameter 6 cmSalvinia Auriculata (Brazilian Salvinia) is a floating ornamental plant. It is native to the calm, still waters of South and Central America. It can be found from Paraguay to Cuba. It owes its popularity above all to its original appearance. Its small oval leaves with a diameter of 10 mm cm are arranged opposite each other on an elongated leaf stalk. These leaves are covered with fine hairs that trap air bubbles, allowing them to float. Depending on the light intensity, they are wavy or flat. Salvinia forms a third type of underwater leaves on which the spores are deposited.Like all floating plants, Salvinia is recommended for shady waters . Its great appetite for nitrogen and phosphorus compounds makes this plant a good ally in the fight against algae.
Salvinia has low light and nutrient requirements. It grows well in both moderate and strong light. As a floating plant, it does not require a substrate but draws all the necessary nutrients directly from the water. During the vegetation period, it reproduces by spreading, whereby the growth rate is moderate. This makes it easy to control its growth and remove excess plants. It grows to a length of 3-6 cm and likes warm, humid air, so it is advisable to use a glass or cover when growing it.It should be placed in such a way that no condensation falls on the plants. It adapts very quickly to the new parameters. However, it should be borne in mind that it will die if there is too little light. It thrives best in soft to medium-hard water at 22-24°C.
The in vitro culture of plants is carried out in tissue culture laboratories. Thanks to the sterile production conditions, the cuttings are free from snails, algae or pathogens.Planting:The plant must be removed from the cup and thoroughly rinsed of the gel under running water. This is best done by placing the plant in a container of lukewarm water. Most of the gel will then fall off by itself. Place the plant on the surface of the water.
Anubias barteri var. glabra
CHF 16.90
Anubias barteri var. glabraAnubias barteri var. glabra' or Anubias minima. This is a recommended species for aquaria with little light. Ideal for medium-sized tanks. The plant is easy to grow, does not require intensive fertilization and reproduces by dividing the rhizome. In vitro plant.Difficulty of cultivation: easyLight requirement: lowCO₂ requirement: lowHeight of the adult plant: 15-25 cmGrowth: slowTemperature: 20 - 22°CPlacement in the aquarium: Middle groundOrigin: AfricaCup diameter 6 cmAnubias Barteri Var. Glabra is a green plant from the Asteraceae family that is native to the swamps of Africa. It can grow both under water and in water. It can be found in the trade under the name Anubias minima. Unlike other Anubias, it is easy to plant in the substrate and has characteristic lanceolate leaves that grow up to 15 cm long. It can reach a height of 25 cm, but grows slowly so that it can also be cultivated in small aquariums.
The plant has a rhizome from which roots grow that wrap tightly around the spot where it is planted , making it ideal for planting on roots or lava rock. It is suitable for a second or third planting
Anubias thrives at different temperatures. It is suitable for cooler tanks as well as warm, tropical aquariums, e.g. with discus fish.It tolerates hard, soft, acidic and alkaline water. It prefers weak, diffuse lighting. It can become overgrown with algae under prolonged and intensive lighting. It is therefore advisable to plant it in darker or even shady areas of the aquarium.This plant does not like neglected aquaria and prefers the water to be changed regularly and no dirt to accumulate on its leavesIt grows slowly but forms a very attractive shape, especially in a group that forms a green, decorative clump. It feels very comfortable in tanks with a low water level and looks great in 'dachshund' type aquariums, where it creates the effect of an aesthetically pleasing tank. Thanks to it, we can create very interesting compositions. It is also well suited for aquariums with cichlids and other herbivorous fish
It does not require special care, it is enough to remove older leaves, which stimulates the rhizome to form cuttings. If you want to obtain new cuttings, you can regularly divide the rhizome into 2-3 cm long sections.
To attach the Anubias to roots or stones, a very thin string, thread or a special adhesive for attaching aquarium plants is sufficient.
The in vitro culture of plants is carried out in tissue culture laboratoriesThanks to the sterile production conditions, the cuttings are free from snails, algae or pathogens.Planting:The plant must be removed from the cup and thoroughly rinsed of the gel under running waterThis is best done by placing the plant in a container of lukewarm water. Most of the gel will then fall off by itself.
Micranthemum umbrosum
CHF 6.50
Micranthemum umbrosum
Micranthemum Umbrosum is a light green stem plant with small round leaves. Depending on how it is pruned, it is suitable for both the foreground and background of the aquarium. Difficulty of cultivation: easy Light requirement: medium, to high CO₂ requirement: medium Height of the adult plant: 20 cm Growth: fast Temperature: 22-26 °C Placement in the aquarium: Second level Origin: North and Central America Cup diameter: 6 cm Micranthemum Umbrosum (Round-leaved meadowfoam) is a naturally occurring plant in North and Central America. It grows both in water and in marshy areas. It is prized by aquarists for its unique appearance.
The plant forms long stems with paired, alternate, small, round, light green leaves. It has a fairly well developed root system. It needs regular pruning and is easy to shape into a desired form. It is propagated vegetatively by cutting off the shoot tips and planting them in the ground.
It likes water with a hardness of 2-12°N, a pH of 5.5-7.7 and a temperature of 24-26°C. It is sensitive to trypaflavin and can be damaged by snails. It has fairly high light requirements. With insufficient light, it pulls upward, and distinct gaps can be seen between the leaves. With sufficient light, it forms dense clumps that are pleasing to the aquarist's eye.Micranthemum umbrosum is usually placed in the background of the aquarium, but it also looks good in the foreground when cut short. It does not require absolute CO₂ fertilization, but grows much faster in its presence. When growing this plant, pay special attention to the proper concentration of iron in the aquarium water..
Planting:The plant must be removed from the cup and thoroughly rinsed from the gel under running water. This is best done by placing the plant in a container of lukewarm water. Most of the gel will then fall off by itself. Divide the contents of the cup into 1-2 cm lumps and then set them at intervals of 1 to 2 cm.
Anubias barteri nana 'Petite
CHF 16.90
Anubias Barteri Nana 'Petite'
Anubias Barteri Nana 'Petite' is a very small, uniformly filigree Anubias variety. Selection has resulted in a miniature form that is ideal for nano aquariums.Difficulty of cultivation: easy Light requirement: low CO₂ requirement: low Height of the adult plant: up to 5 cm Growth slow Temperature: 20-30 °C Placement in aquarium: In the foreground Origin: cultivation 6 cm cup diameter Anubias barteri is a succulent green plant of the rhizome family, naturally native to the swamps of Cameroon and Nigeria, growing in fast-flowing waters. It can grow both under and above water. "Petite" is a selected cultivar of Anubias barteri. This species does not occur in nature in such a miniature form. Consistent selection by Singapore botanists has resulted in a delicate, compact version of Anubias barteri for nano-aquariums. The variety is rarely seen in the trade and represents a kind of rarity. The plant has a rhizome that forms roots that strongly entwine the area in which it is planted. It is therefore ideal for planting on roots or rocks, such as volcanic lava.The very decorative, tiny, heart-shaped leaves are stiff and fleshy, shiny on the surface and have a velvety texture on the underside. At the same time, they are very hard and stiff, so herbivorous fish are not interested in them. The height of this miniature plant is less than 5 cm. Therefore, it is well suited for the foreground. However, it can also be used for eye-catching trees in the background. Under good conditions, it can produce a delicate white flower. Anubias Barteri Nana 'Petite' can handle a variety of temperatures. It can thrive in cooler tanks as well as in warm, tropical aquariums with discus fish, for example. It likes water with a pH of 5.5-8.0, up to 15 ° dH. it prefers weak, diffuse lighting, reaching more like 0.3 W/l. In case of prolonged and intense lighting, it may become overgrown with algae. Therefore, it is advisable to plant it in darker or even shaded areas of the tank. The plant does not like neglected aquariums, it prefers water that is changed regularly and does not leave dirt on its leaves. It grows slowly, but forms a very attractive shape, especially when it grows in a group to form a green, decorative clump. It is very comfortable in tanks with low water levels and looks great in nano aquariums. Therefore, it is a popular plant for many aquascapers. With it can create very interesting miniature compositions. It also does well in aquariums with cichlids and other herbivorous fish. It is often used in shrimp tanks and nano aquariums for fighting fish. It does not require special care, it is enough to remove older leaves, which stimulates the rhizome to form offshoots. If you want to get new cuttings, you can divide the rhizome into 2-3 cm long sections from time to time. To attach the Anubias to roots or stones, it is enough to use very thin string, thread or special glue for fixing aquarium plants.
Planting: The plant must be removed from the cup and thoroughly rinsed from the gel under running water. This is best done by placing the plant in a container of lukewarm water. Most of the gel will then fall off by itself.
Lobelia cardinalis 'Mini
CHF 6.50
Lobelia cardinalis 'Mini'Lobelia cardinalis 'Mini' is a green plant, recommended for the second level of the aquarium and for the paludarium. A very decorative species that is not particularly demanding.Difficulty of growing: easy Light requirements: medium CO₂ requirements: low Outgrown plant height: up to 20 cm Growth: medium Temperature: 15-28°C Placement in aquarium: second level Origin: North America Shell diameter: 6 cm Lobelia Cardinalis mini is a plant native to North America. In nature, it is found in wetlands and riverbanks. It is distributed from the Gulf of Mexico through the eastern states of the United States to southern Canada.
It grows in the ground and has a well-developed root system. The feathery stems can develop auxiliary roots in leafless areas. Its small leaves are bright green, oval with a conspicuous pale central vein.Lobelias can be cultivated in aquariums and paludariums. It thrives in muddy soil as well as underwater. It tolerates temperatures from 15 to 28 °C and can also be kept in a pond. It thrives best at 20-23°C and requires soft to medium-hard water with a pH between 6.5 and 7.2.Without sufficient light, the leaves turn yellow, but in bright light the undersides of the leaves turn purple. It is not particularly demanding, but regular water changes, fertilizer and CO₂ support its growth.In the aquarium, lobelia should be planted in a group in the middle ground, but it is also well suited as a foreground plant. Pruning is necessary for the plant to grow well; use scissors to remove older leaves. You can also cut back the entire plant and use the cut tips as cuttings.
Planting: The plant must be removed from the cup and thoroughly rinsed from the gel under running water. This is best done by placing the plant in a container of lukewarm water. Most of the gel will then fall off by itself. Divide the contents of the cup into 1-2 cm lumps and then set them at intervals of 1 to 2 cm.
Micranthemum sp. 'Monte Carlo'
CHF 6.50
Micranthemum sp. 'Monte Carlo'Micranthemum sp. 'Monte Carlo' is a green plant that gets along with little light. It forms a green lawn in the aquarium. It can also be planted as an epiphyte on roots, ornaments or stones.Difficulty of cultivation: moderately demanding Light requirement: high CO₂ requirement: medium Height of mature plant: 2-10 cm Growth: medium Temperature: 23-28°C Placement in aquarium: in the foreground Origin: South America 6 cm cup diameter Micranthemum sp. 'Monte Carlo' (Micranthemum tweediei) is native to Argentina. It is a lawn plant with small, compact, round, light green leaves. In most cases, the leaves are 0.5-1 cm long. It is ideal fornano aquariums, but also for larger tanks. It forms a fast-growing carpet in the foreground of the aquarium.
Under good conditions it spreads very quickly.Plant in small clumps close together or on roots or rocks. It floats well on substrate. When grown on decorative elements, it forms stems that hang down impressively. Pruning promotes density and growth of the plant.
The care of Monte Carlo is not demanding. It consists of regular pruning with sharp scissors with curved blades.The cut longest branches can be planted in the ground as stems. Such a seedling will form roots and continue to grow.It also grows without additional carbon dioxide supply or macro- and micronutrient fertilizers. However, it should be remembered that it is a slow to moderate growth. To ensure optimal growth, the plant should receive good light conditions and additional CO₂.Fertile substrate and liquid fertilizer have a positive effect on the condition of the plant.Planting: The plant must be removed from the cup and thoroughly rinsed from the gel under running water. This is best done by placing the plant in a container of lukewarm water. Most of the gel will then fall off by itself. Divide the contents of the cup into 1-2 cm lumps and then place them at a small distance in the substrate or on the selected objects.
Ludwigia sp. 'Super Mini Red
CHF 6.50
Ludwigia sp. 'Super Mini Red'Ludwigia sp. Super Mini Red' is a fast growing red plant for the second or third level in the aquarium. It is easy to propagate and does not require strong lighting. This plant grows in the soil and on decoration.Difficulty of cultivation: mediumLight requirement: mediumCO₂ requirement: mediumHeight of adult plant: 10-25 cmGrowth rate: mediumTemperature: 20-28°C Placement in aquarium: second or third level.
Origin: Cultivar (cultivated variety) Cup diameter: 6 cm Ludwigia sp. 'Super Mini Red' is the smallest of the red-leaved Ludwigia varieties. It has fine and delicate dark red leaves. A particularly decorative aquarium plant. Depending on tank size, it is suitable for the middle or third level of the aquarium. It is popular for arrangements in Dutch and natural style aquariums. The leaf blade is about 2 cm long and 1.5 cm wide. The plant does not have excessive requirements. It grows even in moderate light, although the red color then becomes less intense.
The plant can be planted in the ground or on decorations. When attached to the roots, it forms fanciful compositions, reminiscent of treetops. In this form of cultivation should not forget about the additional application of liquid fertilizer. The best growth results are obtained when planted in a fertile substrate. Under good conditions it spreads quickly.Ludwigia sp. Super Mini Red' has many lovers thanks to its extremely intense red color. It discolors easily and quickly under strong light conditions. In this way, it becomes an incredibly eye-catching design element in their aquarium. Due to its rapid growth, it must be regularly cut back and trimmed.
It does well in the strong spots of an arrangement, in the second or third row. The Super Mini Red variety does not require CO₂ and grows in the water column even with low light intensity and low fertilizer levels. Therefore, it is a suitable plant for beginners in plant aquaristics. However, it is important to remember that the best growing results can be achieved with appropriate lighting and additional carbon dioxide addition. It grows in both hard and soft water with pH between 5.5 and 7.5.
It does not require complicated care. Frequent pruning and good growing conditions will ensure beautiful, dense plants. It can grow up to 25 cm tall. As with most stems, the cut tips of the plants can be replanted in the ground. The plant will form side shoots at the cut.Planting:The plant must be removed from the cup and thoroughly rinsed from the gel under running water. This is best done by placing the plant in a container of lukewarm water. Most of the gel will then fall off by itself. Divide the contents of the cup into 1-2 cm lumps and then set them at intervals of 1 to 2 cm.
Limnophila aromatica
CHF 6.50
Limnophila aromaticaLimnophila Aromatica (fragrant limnophilia) is a beautiful plant for the second or third level. It turns purple under intense light.Difficulty of cultivation: moderate Light requirement: medium CO₂ requirement: medium Adult plant height: up to 50 cm Growth: moderate Temperature: 22-28°C Placement in aquarium: second or third level Origin: Asia Cup diameter: 6 cm Limnophila Aromatica (fragrant Limnophila, rice paddy weed) is a plant that has earned a place in aquariums around the world due to its unique appearance and leaf color. It is native to Asia, where it usually grows in rice paddies or swamps near water. It does well after the end of the rainy season in a dry place in a still moist, sandy soil. At high temperatures, the plant flowers, forms fruit, and then dies. Traditionally used as a spice, especially in Vietnamese cuisine. Its flavor is reminiscent of cumin and lemon. Currently, the plant can also be found in America and Australia.Limnophilia Aromatica is a stalk plant that produces lance-shaped leaves with serrated edges. Their color depends on the intensity of light. If the plant has little access to light, its leaves are green. If the light is strong, the entire top of the plant is intense red and the leaves are purple on the underside.
In aquariums, plant it in the second or third level, leaving a distance of 1.5 cm between cuttings. It grows quite fast, its optimal pH is 6-7. It tolerates temperatures between 15 and 30 °C, but it is better to avoid extreme temperatures and keep it between 22 and 28 °C. In aquariums it is propagated by cutting and planting young plants that form on the stems or from the tips. The plant does not require absolute CO₂ fertilization, but grows much faster with CO₂ addition.
To achieve the desired intense red-purple color of the leaves, the plant must be strongly illuminated. In addition, attention must be paid to the correct water parameters in the aquarium, especially the optimal iron, nitrate and phosphate content, so that the plant can absorb the nutrients from the water column. Due to its strongly developed root system, the plant grows best in active media.Planting: The plant must be removed from the cup and thoroughly rinsed from the gel under running water. This is best done by placing the plant in a container of lukewarm water. Most of the gel will then fall off by itself. Divide the contents of the cup into 1-2 cm lumps and then set them at intervals of 1 to 2 cm.
Rotala rotundifolia 'Green
CHF 6.50
Rotala Rotundifolia 'Green'
Rotala Rotundifolia 'Green' (Round-leaved Rotala) is a mid-ground plant. It is characterized by fast growth and moderate light requirements. The color is usually light green.Difficulty of growing: easy Light requirements: medium CO₂ requirements: not necessary Height of mature plant: 50-60 cm Growth: fast Temperature: 20-28°C Placement in aquarium: third level Origin: South Asia, Southeast Asia Cup diameter 6 cm The natural range of the round-leaved Rotalas (Rotala rotundifolia) is South, Southeast and East Asia. It has been spread by humans to Australia, the United States and Brazil, among other places. She is thus already almost a globetrotter.Rotala rotundifolia 'Green' is very similar to Rotala rotundifolia, but its leaves remain bright green even in bright light.
This plant is characterized by its fast growth and its tendency to spread profusely, especially when regularly pruned. It tolerates medium light levels, but the higher the light, the more intense the plant's growth and colors. If left to grow freely, it reaches a length of 30-60 cm, cutting off access to light to the lower parts, where it begins to lose its leaves. Under favorable conditions, if left uncontrolled, it can dominate an entire tank, especially if it is a tank with a small capacity. Once it reaches the surface of the water, it begins to float on it. It does not need additional carbon dioxide fertilization unless you want to accelerate its growth even more.
It is tolerant of pH and water hardness, although like most plants, it cannot tolerate extremes.
It tolerates temperatures between 20 and 28 °C, but thrives better in the upper end of this range. It can grow in both an active and a poor substrate, but in this case it is advisable to fertilize under the roots. In well-lit, CO2-fertilized aquariums, it may require additional fertilization with macronutrients due to its rapid growth. Otherwise, it will lose its color and the leaves will become smaller. Rotala rotundifolia is propagated in the aquarium by cutting off stem pieces and placing them in a selected spot in the substrate. When transplanted to a new tank, it will need some time to acclimate and grow faster.Planting: The plant must be removed from the cup and thoroughly rinsed from the gel under running water. This is best done by placing the plant in a container of lukewarm water. Most of the gel will then fall off by itself. Divide the contents of the cup into 1-2 cm lumps and then place them at a small distance into the substrate.
Eriocaulon cinereum
CHF 6.50
Eriocaulon CinereumEriocaulon Cinereum is a very interesting and eye-catching plant species for the foreground of an aquarium. The plant is characterized by slow growth and the shape of the leaves resembles needles.Cultivation difficulty: moderately demanding Light requirement: high CO₂ requirement: high Height of the adult plant: up to 5 cm Growth: slow Temperature: 19-29 °C Placement in aquarium: in the foreground Origin: Asia 6 cm cup diameter Eriocaulon Cinereum is an undersized plant that does well in the foreground of an aquarium. This species is found on the Asian continent, especially in countries such as China and the Himalayan region. In China it is very common in its natural habitat, but in other countries it is hard to find. Recently, it has gained popularity due to its original and unique structure and characteristic flowers.The plant is characterized by very slow growth, as it takes about 6 months to form a rosette with a diameter of 10 cm. It reaches an average height of 5 cm. There must be a very fertile substrate, as the species has a very extensive root system. Through this, the plant absorbs most of the nutrients it needs for growth. It tolerates a wide range of water temperatures from 19 to 29 °C. It also grows in water with medium to high hardness,but prefers soft water. To ensure good growth, strong lighting and CO₂ dosage is essential, as well as micronutrient fertilization. Under these conditions, it will reward us with a beautiful rosette appearance with many young leaves.The propagation of this plant can be done in several ways. The easiest and most popular is the division of the rosette. This can be done as early as about a month after planting the plant in the aquarium. To get new cuttings, pull out a single plant and remove it from the water. Use a sharp tool to carefully cut the rosette into smaller pieces, and then use tweezers to place them in the substrate. After some time, the cut should be covered with new leaves, and the plant will take on a spherical shape.In aquariums, it likes to bloom, so its original inflorescences make an unusual decoration for any aquarium. Planting: The plant must be removed from the cup and thoroughly rinsed from the gel under running water. This is best done by placing the plant in a container of lukewarm water. Most of the gel will then fall off by itself.
Everything about aquarium plants - for community aquariums
Discover the wide variety of aquarium plants for community aquariums!
In the Zoo Roco aquarium shop you will find a wide range of high-quality aquarium plants that are perfect for a wide variety of fish species and tank sizes. Whether in vitro plants, plants on decor or plants in pots - we have the right plants for every aquarium.
Aquarium plants for community aquariums not only create a natural, harmonious look, but also make a decisive contribution to the ecological balance. They provide shelter and retreats for fish, enrich the water with oxygen and help to bind nutrients. The combination of foreground, mid-ground and background plants creates a structured, lively underwater landscape that offers fish, shrimps and snails optimum living conditions.
Plants for every area of the community aquarium
Foreground plants: Small species such as Micranthemum tweediei (Monte Carlo), Hemianthus callitrichoides (Cuba pearlwort) or Staurogyne repens are ideal for creating dense carpets of plants.
Mid-ground plants: Popular varieties such as Cryptocoryne species, Anubias nana, Lobelia cardinalis or Pogostemon helferi provide visual accents and create depth in the tank.
Background plants: Fast-growing species such as Vallisneria, Hygrophila polysperma, Rotala rotundifolia or Echinodorus bleheri provide height, colour and natural structure.
All plants are available from Zoo Roco as in vitro plants (grown sterile and free from algae, snails and harmful substances), as plants in pots (strongly rooted from specialised nurseries) or as plants on decor (fixed on stones or roots, ready for immediate use).
Plants for community aquariums from Zoo Roco - Your online shop from Switzerland
Design your community aquarium with high-quality aquarium plants from our range and benefit from healthy plant quality, fast shipping, expert advice and many years of experience in aquaristics.
Top Brands
