Product information "Daytime Insertion / Screw-on Adapter Set"
Matrix Insertion / Screw-on Adapter Set
Compact adapter set with a variety of applications. Both hanging and standing use. In addition, provided with holes that allow the screwing on suitable surfaces. The fasteners can be adjusted in width and adapted to the pelvic width. According to the matrix luminaires, all selected materials are UV and corrosion resistant. The aluminum alloy used - typical of daytime® - corresponds to the sea water resistance according to DIN 81249-1.
Composition
Feeding recommendation
Technical details
Size information
0 of 0 reviews
Leave a review!
Share your experiences with other customers.
Login
No reviews found. Be the first to share your insights.
Modular LED system for aquariums
The matrix light bars from daytime are the logical extension of the LED aquarium lights. The sum of all properties of this system sets new standards. The light bars are suitable for freshwater and saltwater aquaristics. Thanks to the modular system, the individual LED modules can be mounted independently in the light bar. This allows for the greatest possible individual lighting solution for your aquarium.
Highend customizing - Module assembly by the aquarium owner
various adapter sets for integration of the "matrix" on the aquarium
Special LEDs for seawater aquaria "Royal Blue 440 - 455 nm"
all aluminum components seawater resistant anodised (according to DIN81249-1)
Bezeichnung(Grösse)
Profillänge
max. Modulanzahl
matrix 20.0
16,6cm
1 St. - 10 Watt
matrix 30.0
25cm
2 St. - 20 Watt
matrix 40.0
35cm
3 St. - 30 Watt
matrix 50.0
45cm
4 St. - 40 Watt
matrix 60.0
55cm
5 St. - 50 Watt
matrix 70.0
65cm
6 St. - 60 Watt
matrix 80.0
75cm
7 St. - 70 Watt
matrix 90.0
85cm
8 St. - 80 Watt
matrix 100.0
95cm
9 St. - 90 Watt
matrix 110.0
105cm
10 St. - 100 Watt
matrix 120.0
115cm
12 St. - 120 Watt
matrix 130.0
125cm
13 St. - 130 Watt
matrix 140.0
135cm
14 St. - 140 Watt
matrix 150.0
145cm
15 St. - 150 Watt
matrix 160.0
155cm
16 St. - 160 Watt
matrix 170.0
165cm
17 St. - 170 Watt
matrix 180.0
175cm
18 St. - 180 Watt
matrix 190.0
185cm
19 St. - 190 Watt
matrix 200.0
195cm
20 St. - 200 Watt
matrix 210.0
205cm
22 St. - 220 Watt
matrix 220.0
215cm
23 St. - 230 Watt
matrix 230.0
225cm
24 St. - 240 Watt
matrix 240.0
235cm
24 St. - 240 Watt
matrix 250.0
245cm
24 St. - 240 Watt
matrix 260.0
255cm
24 St. - 240 Watt
matrix 270.0
265cm
24 St. - 240 Watt
matrix 280.0
275cm
24 St. - 240 Watt
matrix 290.0
285cm
24 St. - 240 Watt
matrix 300.0
295cm
24 St. - 240 Watt
matrix 310.0
305cm
24 St. - 240 Watt
matrix 320.0
315cm
24 St. - 240 Watt
matrix 330.0
325cm
24 St. - 240 Watt
matrix 340.0
335cm
24 St. - 240 Watt
matrix 350.0
345cm
24 St. - 240 Watt
matrix 360.0
355cm
24 St. - 240 Watt
matrix 370.0
365cm
24 St. - 240 Watt
matrix 380.0
375cm
24 St. - 240 Watt
matrix 390.0
385cm
24 St. - 240 Watt
matrix 400.0
395cm
24 St. - 240 Watt
LED converter to matrix
The converter is the engine of every lighting. Different power levels between 40 and 240 watts are available for the daytime LED light. The distributor supplies 2 matrix LED luminaires with a converter at the same time. It is always important to ensure that the total power of the lights does not exceed the rated power of the converter used. The maximum allowable power is 240 watts (regardless of the number of occupied seats). Converter, distributor and LED light are safe to connect without tools via a plug-in system.Item No. rated capacity
Art.-Nr.
Nennleistung
41-0012
40 Watt
41-0013
60 Watt
41-0014
90 Watt
41-0015
120 Watt
41-0016
180 Watt
41-0017
240 Watt
sera LED adapter short
For easy mounting of sera LED X-Change Tubes in T5 and T8 tubes.
Mostly. Vary from supplier to supplier, the lengths of the fluorescent tubes
minimal. With rigid connections, it can then also here to problems
come. For such problems, there is the sera adapter. The
fluorescent tubes are not simply firmly connected to the adapter, but simply plugged in. This has the advantage that
the tube can still be moved. This leeway, which you
thereby leave, allows you a flexible mounting on your aquarium. Easy and flexible mountingOptimal setup of your aquariumSuitable for 549mm, 849mm, 1149mm tubes
Sera LED AdapterFor easy mounting of the sera LED X-Change Tubes in T5 and T8 tubesMost of the time. The lengths of the fluorescent tubes vary from supplier to supplier,
minimal. With rigid connections, it can then also here to problems
come. For such problems, there is the sera adapter. The
fluorescent tubes are not simply firmly connected to the adapter, but simply plugged into it. This has the advantage that
the tube can still be moved. This leeway, which you
thereby leave, allows you a flexible mounting on your aquarium. Easy and flexible mountingOptimal setup of your aquariumSuitable for all T8 fluorescent tubes
Sera LED Adapter For easy mounting of sera LED X-Change Tubes Mostly the lengths of the fluorescent tubes vary minimally from supplier to supplier. With rigid connections, problems can then also occur here. For such problems, there is the sera adapter. The fluorescent tubes are not simply firmly connected to the adapter, but simply plugged in. This has the advantage that the tube can still be moved. This leeway, which you leave yourself, allows you a flexible installation on your aquarium. Easy and flexible mountingOptimal setup of your aquarium.
Sera Tube Holder Clear 2 pcsClear acrylic tube holder for Sera LED tubes.The holder allows you to hang the light as you wish. The bracket is made of a solid acrylic and its simple design ensures that the aquarium is still the main focus. Adjustable up to 13 mm.
For hanging Sera LED tubesFixed acrylic glass
Sera LED extension cableExtension cable for the Sera LED series. It may happen that when you connect your Sera LED, you noticed that your cables are not long enough. For such cases, there is the Sera extension cable. The cable 1.2 m long and can make your life much easier.1.2 m cable.
To connect to Sera cable connections
Sera ballastFor powering the Sera LED Tubes.The Sera Driver is necessary for powering the Led Sera Tubes. However, it does not only output current, but can supply multiple tubes with a Triple Cable. The current capacity is optimally utilized thanks to the Driver. The device is necessary for a power supply of the Sera TubesRegulates the power supply if multiple tubes are connected. The recommendation for wattage distribution is as follows: Max. Consumption < 20 watts sera LED ballast 20 V DC 1 A Consumption < 60 watts sera LED ballast 20 V DC 3 A
LED Triple CableA triple power distributor for Sera LED Tubes.The Sera Triple Cable, together with a Sera Driver, can give power to three different lamps or dimmers. The distributor gives the optimal amount of power for each lamp connected.
Sera LED Digital DimmerWith the Digital Dimmer, you can control your Sera LED lamps. The dimmer makes it possible for you to change the brightness and light intensity in the aquarium. This means you can always adjust the brightness to your fish inhabitants. The dimmer can also be programmed to turn the light on and off, as well as the whether the lighting slowly increases or decreases. In combination with a LED Sunrise Tube Change and the adjustable time, you can achieve perfect a sunrise and sunset. For an even greater natural feeling you can also determine the cloud situation.Compatible with all Sera LED productsSimulate natural weather
Ultra seal fluorescent lighting controller
A controller for lighting tubes. Comes with waterproof ultra seal lamp leads, universal mounting brackets and starter.
JBL LED Solar Control
With the remote control included in the JBL LED SOLAR Natur you have the possibility to gradually dim the light and choose from three color temperatures.As soon as you complete your JBL LED SOLAR Natur (ideally in combination with JBL LED SOLAR Effect) with the JBL LED SOLAR WiFi Control, a new world of control opens up for you:With the help of the JBL LED SOLAR WiFi Control you can download biotope data from the Pantanal (southwestern Brazil) or from the region of the East African Grabenbruch lakes (Malawi-Tanganyika). Your LEDs will then adjust the local climate situations depending on the season (including dry and rainy seasons, thunderstorms & cloud cover).For a goldfish aquarium, the lighting will emphasize the beautiful colors and a company aquarium will set a light that will show a 10-day sun day, the right light for plants and strong colors for the fish. Thunderstorms and clouds are recorded by a random generator.For friends of aquariums (aquascaping) there is a light program similar to the program for community aquariums, but with higher light intensity.With each program, the acclimatization mode can be chosen initially, making it easy for your plants to adapt to the much brighter light from the previous fluorescent light fixtures without causing problems. Of course, any program can be chosen without acclimation.You can also set self-selected lighting situations in a manual mode.For all the mentioned programs you have 2 LED lamp types available: 1.) JBL LED SOLAR nature and 2.) JBL LED SOLAR Effect. If you only operate the JBL LED SOLAR Nature without the JBL LED SOLAR Effect with the JBL LED SOLAR WiFi Control, you can achieve all functions such as thunderstorms, clouds as well as sunrise or sunset, but without colored effects!
For the control of JBL LED SOLAR Nature individually or in combination with JBL LED SOLAR Effect. Control biotope data, effects, thunderstorms, sunrise and sunset via WiFi from your mobile phone
Easy to use: replace existing IR receiver with JBL WiFi Control and control desired effects via app
5 programs available + additional program for manual input (biotope South America & Africa, aquascaping plants, goldfish, community aquarium, any program with acclimatization)
Biotope data includes dry and rainy season, cloud cover, thunderstorms and sunrise and sunset
Scope of supply: WiFi control unit for insertion into the JBL LED SOLAR system for 2 lights, required app is always free
Smart Control SC16 3-channel for matrix & pendix
With the Smart Control SC 16 from daytime you can simulate sunrise and sunset, cloud & thunderstorms. This control system offers everything that is currently possible at the Martk. Load capacity: max. 240 watts (programming and control with smartphone or tablet possible)
Sunrise, sunset, morning & evening red, noon lowering, etc. - Simulation
natural lighting conditions and changes by up to 10 freely programmable switching or dimming times
Safe and comfortable programming via smartphones and tablets with Android and iOS operating system
Dimming with almost no "jumps" over the entire brightness course
Individually adjustable light scenarios for every day or night time
Clouds and Thunderstorms - Random Weather Simulation can be turned on or off for any time of the day or night. 3 intensity levels selectable
Programming in tabular form - clear and compact
Demonstration operation with constantly changing scenarios
Manual changes of lighting conditions in real time via sliders "Slider"
Cloud flight and lightning at the push of a button - manually triggered weather simulation
Professional plug-in system Fa. Binder "Plug & Play" control is simply plugged in between converter and luminaire, even later!
Operation of luminaires of daytime® lines matrix & pendix with up to 240W (24 matrix LED modules)
Parallel operation and combination of luminaires of all daytime® lines with optionally available power expansion module SEM16 in the corresponding design
Software update via app (only iOS) from the comfort of your home
Timer Mechanical for aquariums or terrariums
childlock
easy and fast programming for 24h
up to 48 switching options per day, every 15 minutes
maximum load: 10 (4) A / 2400 watts
White
for aquariums or terrariums and other bulbs
CHF13.50
❅
❆
❅
❆
❅
❆
❅
❆
❅
❆
❅
❆
Foundation Modal
This Modal is powered by moori Foundation
This website uses cookies to ensure the best experience possible. More information...