JBL Nitrate Test NO3

Product number: CO-JB24125.00

CHF32.90

Stock: 1

Available, delivery time 1-3 days

Variante (2)
Pick your accessory
CHF14.50
CHF21.50
from CHF18.90
Zahlungsarten
Product information "JBL Nitrate Test NO3"

JBL Nitrate Test NO3 - Quick test to determine the nitrate content in fresh and saltwater aquariums and pond

  • Easy and reliable monitoring of the water values of aquariums and ponds
  • Determines the ideal nitrate values to control the algae in freshwater and seawater
  • Laboratory comparator system to compensate the inherent water colouring: fill plastic cuvette with sample water, add reagents to another cuvette, place both cuvettes in holder, read values on colour chart
  • When to use: for setting up a new freshwater aquarium: once a week. For initial setup with marine water: once a week. In case of green algae problems
  • 1 quick test, Nitrate Test NO3. Contents for approx. 50 tests, incl. 2 reagents, 2 glass vials with screw caps, syringe, dosing spoon, comparator block and colour scale. Refill reagents available separately

Healthy aquarium/healthy pond with conditions close to nature
The right water values are dependent on the fish stock and the plants in the aquarium/pond. Even if the water looks clear it can be contaminated. With bad values diseases or algae can appear in the aquarium/pond. To maintain a healthy aquarium with conditions close to nature it is important to check and adapt the water values regularly.

For each water analysis JBL provides water tests in the form of quick tests or colour change tests. These determine a certain value or several values in one go. With these water tests you can recognise algae problems and negative nitrate, nitrite, potassium, magnesium values etc.

Why test?
Nitrate is the end product of the mineralisation in the aquarium/pond. Even in relatively high concentrations it is non-toxic for fish, but has an adverse effect for plant growth and the well-being of many a fish species. Furthermore too high nitrate contents promote unwanted algae growth if phosphate is present in the water as well as nitrate.

Variante: Testset
Composition
Feeding recommendation
Technical details
Size information

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Zubehör

Zubehör

JBL ProScape P Macroelements
JBL ProScape P Macroelements - Phosphorus plant fertiliser for aquascaping Additional care for plants: supplementary phosphorus fertiliser for aquascaping aquariums Use for high power light aquarium: 2 ml/100 l, for weakly lighted aquariums: 1 ml/100 l Thriving plant growth, prevents phosphorus deficiency: contains additional plant-available potassium Checking of dosage with JBL phosphate test sensitive Healthy plant growth is based on the following three main pillars: A supply of light, a supply of CO2 and an adequate/optimal supply of mineral nutrients. The supply of nutrients is described by Liebig’s Law of the Minimum. According to this concept, the nutrient which is available in the minimum amount limits the growth of plants regardless of whether it is a microelement or a macroelement.  Microelements are trace elements which plants need in small amounts, whereas macroelements are used for growth in larger amounts.In a well-planted aquarium, both microelements and macroelements are consumed in large amounts. Particularly when the fish population is small, the microelements, as well as the macroelements of nitrogen, phosphorous and potassium, quickly drop down to the minimum. The macroelements can easily be supplied by using JBL ProScape NPK Macroelements or by adding each of the individual components, nitrogen, phosphorous, potassium and magnesium, separately. If the latter procedure is selected, it is recommended to check the water values with the JBL Test Set each time. Phosphorus in the form of phosphates plays an essential role in all vital functions. For example, phosphates play a key role in over-all energy metabolism, as well as in the structure of the hereditary information of all organisms. Whereas it is more common to find an excess of phosphates in aquariums with larger fish populations which, in turn, can lead to algae growth, phosphates are often in scarce supply in planted aquariums due to consumption by the aquatic plants. This limits growth in the tank. As the concentrations of phosphates in the drinking waters usually used in aquariums vary considerably, depending on the water supplier, it is advisable to use JBL PO4 Test Set sensitive to determine the current phosphate concentration of the water used before adding the JBL ProScape P Macroelements fertiliser.JBL ProScape P Macroelements supplies tank water with phosphorous in the form of water-soluble phosphates. As a result, the aquatic plants obtain the supply of phosphate they require. Potassium is also added to the water at the same time. The normal dosage is 2 ml / 100 l of water for a very well-lit tank with >= 1 W/l of illumination and 2 ml/100 l of water for a tank that is not as well lit. The supply of carbon dioxide must also be considered. The following table shows recommended fertiliser concentrations according to the general conditions of the aquarium.As actual precise consumption cannot be predicted, we recommend regularly checking the phosphate level with the JBL PO4 Test Set sensitive, especially prior to each follow-up dose

CHF14.50

JBL ProScape N Macroelements nitrogen plant fertiliser
JBL ProScape N Macroelements - Nitrogen plant fertiliser for aquascaping Additional care for plants: supplementary nitrogen fertiliser for aquascaping aquariums Dosing is dependent on intensity of illumination, Co2 supply and consumption. Healthy plant growth, prevents nitrogen deficiency: contains additional potassium, calcium and magnesium Checking of dosage with JBL nitrate test Healthy plant growth is based on the following three main pillars: A supply of light, a supply of CO2 and an adequate/optimal supply of mineral nutrients. The supply of nutrients is described by Liebig’s Law of the Minimum. According to this concept, the nutrient which is available in the minimum amount limits the growth of plants regardless of whether it is a microelement or a macroelement.  Microelements are trace elements which plants need in small amounts, whereas macroelements are used for growth in larger amounts.In a well-planted aquarium, both microelements and macroelements are consumed in large amounts. Particularly when the fish population is small, the microelements, as well as the macroelements of nitrogen, phosphorous and potassium, quickly drop down to the minimum. The macroelements can easily be supplied by using JBL ProScape NPK Macroelements or by adding each of the individual components, nitrogen, phosphorous, potassium and magnesium, separately. If the latter procedure is selected, it is recommended to check the water values with the JBL Test Sets each time. Nitrogen in the form of oxygen compounds (NOx) or hydrogen compounds (amines – NH2) have essential functions in an organism, such as in protein metabolism. Whereas it is more common to find an excess of nitrogen in aquariums with larger fish populations which, in turn, can lead to algae growth, nitrates are often in scarce supply in planted aquariums due to consumption by the aquatic plants. This limits growth in the tank. As the concentrations of nitrate in the drinking waters usually used in aquariums vary considerably, depending on the water supplier, it is advisable to use JBL NO3 Test Set to determine the current nitrate concentration of the water before adding the JBL ProScape N Macroelements fertiliser.JBL ProScape N Macroelements supplies the tank water with nitrogen in the form of ammonium salts and nitrate salts. As a result, the aquatic plants obtain the supply of nitrogen they require. Potassium and calcium are also added to the water at the same time. The normal dosage is 2 ml / 100 l of water for a very well-lit tank with >= 1 W / l of illumination and 1 ml/100 l of water for a tank that is not as well lit. The supply of carbon dioxide must also be considered. The following table shows recommended fertiliser concentrations according to the general conditions of the aquarium.As actual precise consumption cannot be predicted, we recommend checking the nitrate concentration regularly with the JBL NO3 Test Set, especially prior to each follow-up dose.

CHF21.50

JBL ProScape NPK Macroelements 3-component
JBL ProScape NPK Macroelements - 3-component plant fertiliser for aquascaping Additional care for plants: supplementary fertiliser with 3 components (N = nitrogen; P = phosphorus; K = potassium) for aquascaping aquariums Dosing is dependent on intensity of illumination, CO2 supply and consumption. Thriving plant growth, prevents deficiency symptoms: contains nitrogen as nitrate, phosphorus as phosphate, potassium and magnesium for a controlled and precise increase of the values Iron and trace elements should be added separately. Check with JBL nitrate, phosphate sensitive and potassium tests Nitrogen in the form of oxygen compounds (NOx) or hydrogen compounds (amines – NH2) have essential functions in an organism, such as in protein metabolism. Whereas it is more common to find an excess of nitrates and phosphates in aquariums with larger fish populations which, in turn, can lead to algae growth, nitrates are often in scarce supply in planted aquariums due to consumption by the aquatic plants. This limits growth in the tank. As the concentrations of nitrates and phosphates in the drinking waters usually used in aquariums vary considerably, depending on the water supplier, it is advisable to use JBL PO4 Test Set and JBL NO3 Test Set to determine the current phosphate concentration and nitrate concentration of the water before adding the JBL ProScape NPK Macroelements. JBL ProScape NPK Macroelements supplies the tank water with nitrogen and phosphorus in the form of nitrate salts and water-soluble phosphate salts. As a result, the aquatic plants obtain the supply of nitrogen they require. Potassium and magnesium are also added to the water at the same time. The normal dosage is 5 ml /100 l of water for a very well-lit tank with >= 1 W / l of illumination and 2.5 ml/100 l of water for a tank that is not as well lit. The supply of carbon dioxide must also be considered. The following table shows recommended fertiliser concentrations according to the general conditions of the aquarium.As actual precise consumption cannot be predicted, we recommend regularly checking the nitrate concentration and phosphate concentration with JBL NO3 Test Set or JBL PO4 Test Set, especially prior to each follow-up dose. If the measured phosphate levels and nitrate levels of the tank water are outside the above-mentioned range, it is advisable to use the single-component fertilisers, JBL ProScape N Macroelements, JBL ProScape P Macroelements, JBL ProScape K Macroelements and JBL ProScape Mg Macroelements.

CHF18.90

Suggested products

Tip
New
ARKA pH meter / pH measuring device
Digital pH meterThis high-precision instrument has been specially developed for determining the pH value of water. With its user-friendly operation and fast response time, it is a practical tool for anyone who wants to determine the quality of their water. Whether for the home aquarium, the garden pond, the pool in the garden or for checking osmosis and drinking water - the ARKA myAQUA® pH meter provides reliable measurement results.It is ideal for regular monitoring to ensure the well-being of aquatic life or to guarantee water quality for human consumption. The importance of a balanced pH value cannot be overestimated, as it is one of the key factors in maintaining a healthy water system.The ARKA myAQUA® pH meter makes it easier than ever to keep an eye on this critical parameter. Thanks to its compact size and robust design, it is suitable for both home use and professional applications. The simple handling enables even inexperienced users to take precise measurements and thus actively contribute to the care of their water environment.Measuring range: 0.00 - 14.00 pHMeasuring gradation: 0.01 pHAccuracy: +/- 0.01 pHOperating temperature: 0 - 60 °C

CHF19.90

New
ARKA pH/TDS/EC meter
Digital pH/TDS/EC meterThe ARKA myAQUA® pH/TDS/EC meter is an advanced water analysis tool designed for comprehensive and accurate testing of various water quality parameters.It can be used to quickly and accurately measure total dissolved solids (TDS), electrical conductivity (EC), pH and temperature in water and other liquids.Its versatility makes it an indispensable tool for monitoring and maintenance in aquariums, ponds, pools and in the treatment of osmosis and drinking water.Whether it is about the health of aquarium inhabitants, the quality of swimming pool water or the safety of drinking water - the ARKA myAQUA® pH/TDS/EC meter provides reliable data that you can always rely on.Measuring range:pH: 0.00 - 14.00 pH TDS: 0 - 9999 ppm EC: 0 - 9999 µS/cmMeasuring gradation: pH: 0.01 pH TDS: 1 ppm EC: 1 µS/cmAccuracy: pH: +/- 0.05 pH TDS: +/- 2% EC: +/- 2%Temperature: 0 - 60 °C 32 - 140 °FATC: 0 - 60 °C 32 - 140 °F

CHF49.90

SuperFish Digi Test pH
SuperFish Digi Test pHDigital ph meter for aquariums and pond water. This digital meter measures ph with an accuracy of up to 0.02 units, has an automatic calibration function and makes measuring ph much easier.Accurate pH meter for aquariums and. pond water.Measures pH from 0 to 14 with an accuracy of up to 0.02 units.The device features an automatic calibration function for 1-point (6.86) and 2-point calibration (4.00 - 9.18).Calibration powder is included.Automatic power off after 5 minutes.UseRemove the protective cap before use.Press the power button. Submerge the pH meter up to the Immersion line into the water. The meter is NOT waterproof, never immerse the Never immerse the meter beyond the immersion line. beyond the immersion line into the water.Wait about 30 seconds until the reading is numerically constant.Read the pH of the water.Rinse the electrode with distilled water. rinse, dry with a cloth and put the protective cap.Avoid heat and direct sunlight. 1-point calibration 6.68 The calibration accuracy is ± 0.1 pHDissolve the pH 6.86 buffer powder in a beaker with 250 ml of distilled 25°C warm water.Dip the pH measuring instrument into the water with the pH 6.86 solution and wait about 30 seconds.Press and hold the CAL button for 5 seconds.The display will begin to flash 6.86. When it stops flashing, the pH meter has been calibrated.Rinse the electrode with distilled water. rinse with distilled water, dry with a cloth and put the Put on the protective cap. 2-point calibration 4.00 and 9.18 The calibration accuracy is ± 0.02 pHDissolve the pH 4.00 buffer powder in a beaker with 250 ml of distilled 25°C warm water. Dissolve the buffer powder pH 9.18 in another beaker.Dip the pH meter into the water with the pH 4.00 solution and wait about 30 seconds.Press and hold the CAL button for 5 seconds.The display will begin to flash 6.86.Press the CAL button briefly immediately.The display will flash 4.00. Wait until the flashing stops.Rinse the electrode with distilled water. water.Now immerse the pH meter in the Water with the pH 9.18 solution and wait about 30 seconds.Press and hold the CAL button for 5 seconds.On the display begins to flash 6.86.Press the CAL button immediately briefly.On the display flashes 4.00. Press the CAL button again immediately.On the display now flashes 9.18. If it stops stops flashing, the pH meter is calibrated.The electrode with distilled water Rinse with distilled water, dry with a cloth and put the protective cap on.Care: Keep the electrode clean and dry. Always close the meter with the protective cap. Warranty 1 year manufacturer's warranty. Damage due to improper use (battery leakage, water damage) is not covered. Lift the proof of purchase for proof of warranty. for proof of warranty. The warranty will be voided without proof of purchase! The batteries supplied free of charge have a life of one year. If they are empty at the time of the empty, you must replace them yourself. replace them yourself.

CHF16.90

SuperFish Digi Test EC-TDS
SuperFish Digi Test EC-TDS3-in-1 TDS meter with plug&play function. High performance and fast test results.SuperFish Digi Test EC-TDS. Accurate 3-in-1 TDS meter for. Aquarium and pond water.Measures 3 different values: conductivity (EC), total dissolved solids (TDS) and. Temperature in Celsius (°C) and Fahrenheit (°F).Calibration is not required.The meter has an automatic Temperature compensation function.Automatic shutdown after 5 minutes. UseRemove the protective cap before use.Press the on/off button.Submerge the EC-TDS meter up to the Immersion line into the water. The meter is NOT waterproof, never submerge it beyond the immersion line into the water.The test results are saved automatically after 5-10 Seconds automatically saved. To achieve a better temperature measurement, press CLEAR and repeat the Test. The test results can also be stored by Pressing HOLD to save.Take the meter out of the water, to read the test results.Press the MODE button to toggle between the test modes (ppm, μS/cm, °C and °F).Pressing the CLEAR button will clear the test results are cleared for a new measurement.Wait 30 seconds before starting a new start a new measurement.Wipe the electrode clean, switch off the turn off the meter and replace the protective protective cap back on.Avoid heat and direct sunlight.Care : Keep the electrodes clean and dry. Always close the meter with the protective cap. Please note!  The color change of the display (green/red) has no meaning..

CHF13.90

Seneye Home - Freshwater Aquarium
Seneye Home - Freshwater Aquarium - Automatically tests multiple life critical parameters temperature - constantly monitors water temperature, so you can get an alert if your heater breaks free ammonia - monitors the highly toxic free ammonia (NH3) at very low levels, so you can stop your fish from dying from Ammonia posioning pH monitoring - the seneye monitors pH in your aquarium or pond water between 6.4 and 9. This range is ideal for most aquatic life and by monitoring this range increased accuracy has be achieved. Total Light - monitor your light levels over the course of the day and know if if your lights fail. water level - readings are only taken when the seneye device is in water, no false readings.   Easy to install, simply drop in Constantly watching your aquarium, 5600 readings per month Customisable alerts, directly to e-mail and SMS * Upload results and get straightforward advice * USB connection with multiple connection options, including optional USB power adaptor *seneye+ required for some features. system requirements Windows PC with internet connectivity running Windows 7, 8, 10 32/64bit - Not compatible with Belkin Base and virtual USB extenders.Full speed USB 1.0 portMinimum 1Ghz processor and 128mb RAMInternet Browser: Internet Explorer 9.0+, Firefox 4.0+, Safari 4.0+Download of seneye connect application required from seneye.com Ever lost a fish and not know why? Ever experience new tank syndrome and wished there was a way of knowing when the water is safe for your fish? With a seneye Home it’s now possible for even the most inexperienced fish keeper to be successful and become an expert. Automatic monitoring with a seneye Home can save fish from the devastating effects of ammonia poisoning, as well as from harmful swings in pH and temperature. The intelligent software can even alert the you before there is a problem, so you can relax and enjoy without having to worry – all this and it’s so simple to use. As the seneye devices are USB there are multiple connection options available. When connected to the Power Adaptor readings are stored every hour and flashing lights on the device indicate if there is a problem. Readings are stored for 35 days and are automatically uploaded once reconnected to a PC.

CHF139.90

Tip
JBL ProScan Multi water test with smartphone app
Variante: Basis-Set | Variante (2): Basis-Set
JBL ProScan Multi water test with evaluation by means of smartphone app Contains 24 analysis strips ( GH, KH, pH, nitrite, nitrate, chlorine and for the calculation of CO₂) with matching JBL ProScan ColorCard. The colour chart serves as a reference when scanning the analysis strip. The result is evaluated and, where necessary, instructions are displayed to show how to optimize the water values. The appropriate app is available free of charge.

Variants from CHF27.50
CHF29.90

Tetra Test Strips 6 in 1
Tetra Test 6in1  Mit dem Tetra Test 6in1 können Sie in Sekundenschnelle prüfen, ob sich das Aquarienwasser in optimalem Zustand befindet. Schnelle und einfache Überprüfung der Wasserqualität Teststreifen zur Überprüfung von 6 Wasserqualitätsindikatoren in nur 60 Sekunden Ermittelt den pH-Wert, die Karbonat- und Gesamthärte (KH+GH), den Nitrit (NO2)-, Nitrat (NO3)- und Chlor (Cl2)-Gehalt. pH – Der pH-Wert gibt Aufschluss über den für die Gesundheit der Fische wichtigen Säure- bzw. Basengehalt des Wassers. Ideal ist ein pH-Wert zwischen 6,5 und 8,5. KH – Die Karbonathärte sorgt für einen gleich bleibenden pH-Wert. In der Regel wird ein Härtegrad zwischen 3° und 10° dH empfohlen. GH – Die Gesamthärte hat einen direkten Einfluss auf die Gesundheit von Fischen, Pflanzen und Mikroorganismen. Ideal ist ein Wert zwischen 6° und 16° dH. NO2 – Ein gegen null tendierender Nitritgehalt ist ein Hinweis darauf, dass der Filter seine Aufgabe erfüllt und das Wasser unbedenklich für die Fische ist. NO3 – Der Nitratgehalt gibt Aufschluss darüber, wie „frisch“ das Wasser und wie hoch folglich die Wahrscheinlichkeit des Algenwachstums ist. Cl2 – Gibt Aufschluss über den Chlorgehalt des Wassers. Ein zu hoher Wert ist schadet nützlichen Bakterien und Fischen.

CHF26.90

Tetra Test PH Seawater
Tetra Test pH Meerwasser Für genaue Messungen des pH-Gehaltes in Meerwasser. hohe Reichweite gute Langzeitstabilität hohe Langzeitstabilität Inhalt: 10 ml

CHF12.90

Tetra Test NH3/NH4
Tetra Test NH3/NH4 Misst zuverlässig und genau den Ammoniakwert Für Süss- und Meerwasseraquarien geeignet hohe Reichweite gute Langzeitstabilität

CHF24.50

JBL Test Combi Set plus Fe
JBL Test Combi Set plus Fe Test case with the most important water tests in freshwater aquariums, incl. iron test Monitors the water values in aquariums simply and reliably. Determines: pH value, carbonate hardness, iron, nitrite, nitrate, CO2 (calculation via table) Easy to use: syringe for exact measurement of the water quantity, detailed instructions for use Laboratory comparator system to compensate the inherent water colouring, analysis record sheet, instructions for problem solving, CO2 table Child-proof reagent bottles, water-proof plastic case, refillable kit Package contents: 1 test case for planted aquariums, 5 reagents, 3 glass vials, syringe, dosing spoon, comparator block, plastic cuvette, colour charts, analysis record sheets, instructions Healthy aquariums with conditions close to nature The right water values are dependent on the fish stock and the plants in the aquarium. Even if the water looks clear it can be contaminated. With bad values diseases or algae can appear in the aquarium. To maintain a healthy aquarium with conditions close to nature it is important to check and adapt the water values regularly. With the JBL Test Combi Set you can determine the 5 most important water values in your aquarium. Precise measurement of the following values: pH test: acidity of the water from 3.0 to 10 KH test: pH stability of the water (carbonate hardness) Fe test: iron value to control the fertilisation NO2 test: toxic nitrogen compound NO3 test: reason for algae growth To determine the CO2 content you just need to measure the pH and KH values. From both values arises the CO2 content in the water, which then can be referenced from the enclosed table. You can analyze your measured water values in the JBL Online Laboratory free of charge and receive recommendations.

CHF81.00

JBL pH 7.4-9.0 Test
Variante: Testset | Variante (2): Testset
JBL pH Test 7.4-9.0 - Quick test to determine the pH values in ponds, freshwater and marine aquariums in the range 7.4-9.0 Easy and reliable monitoring of the water values of aquariums and ponds. Determines the ideal pH value for freshwater and seawater Laboratory comparator system to compensate the inherent water colouring: fill plastic cuvette with sample water, add reagent to another cuvette, place both cuvettes in holder, read values on colour chart When to use: for setting up a new aquarium: daily for one week, afterwards weekly Online Laboratory: regular control for a healthy aquarium/pond with conditions close to nature. JBL has water tests in the form of quick tests or colour change tests for every water analysis. Testing aquarium water for healthy, clear water Package contents: 1 quick test, pH Test 7.4-9.0. Contents for approx. 80 measurements. Incl. reagent, 2 glass vials with screw cap, syringe, dosing spoon and colour scale. Refill reagent available separately Healthy aquarium/healthy pond with conditions close to natureThe right water values are dependent on the fish stock and the plants in the aquarium/pond. Even if the water looks clear it can be contaminated. With bad values diseases or algae can appear in the aquarium/pond. To maintain a healthy aquarium/pond with conditions close to nature it is important to check and adapt the water values regularly.For each water analysis JBL provides water tests in the form of quick tests or colour change tests. These determine a certain value or several values in one go. With these water tests you can recognise algae problems and negative nitrate, nitrite, potassium, magnesium values etc.Why test?The well-being of aquarium and pond dwellers and the growth of aquatic plants depend to a large extent on the pH level being kept as constant as possible. The pH level can also affect many substances dissolved in the water. Fluctuations in the pH level are definitely to be avoided.JBL Online LaboratoryRegular control for a healthy aquarium/pond with conditions close to nature. Enter your water values into the JBL Online Laboratory and get an in-depth analysis of your values within seconds.Recommended pH values:Freshwater aquarium (community aquarium): 6.5-7.5Lake Malawi/Lake Tanganyika aquarium: 7.8-9.2Plant aquarium with few fish (aquascaping): 6.0-7.0Marine aquarium: 7.9-8.5Pond: 7.5-8.5

Variants from CHF7.90
CHF15.90

JBL K Potassium Test Set
Variante: Testset | Variante (2): Testset
JBL K Potassium Test Set - Quick test to determine the potassium content in freshwater Simple and reliable control of water values. Checks the freshwater aquarium fertilisation by determining the ideal potassium value Quick test: fill cuvette with sample water, add reagents, fill turbid sample water into special glass vial until underlying cross is no longer visible, read filled in quantity. This value is equivalent to the potassium content in mg/l Use with diatom problems Healthy aquariums with conditions close to natureThe right water values are dependent on the fish stock and the plants in the aquarium. Even if the water looks clear it can be contaminated. With bad values diseases or algae can appear in the aquarium. To maintain a healthy aquarium with conditions close to nature it is important to check and adapt the water values regularly. For each water analysis JBL provides water tests in the form of quick tests or colour change tests. These determine a certain value or several values in one go. With these water tests you can recognise algae problems and negative nitrate, nitrite, potassium, magnesium values etc. Why test?Potassium is one of the macroelements which plants in freshwater absorb quickly and effectively within a few hours and can also store for a limited time. Growing plants require more potassium than other elements. As a result, potassium concentrations can drop to a minimum range, causing plant growth to stagnate, even if the aquarium water is fertilised regularly. Potassium levels in mains water are usually too low compared to those in natural biotopes, particularly with relation to calcium and magnesium concentrations.

Variants from CHF21.90
CHF34.90

Customers also viewed

Sun protection for outdoor enclosure
Sonnenschutz für Freigehege mit KlettverschlüssenOptimaler Sonnenschutz für Freigehege ideal für den Sommer idealer Sonnenschutz mit Klettverschlüssen einfach zu befestigen für Freigehege 116x72cm Dieser Sonnenschutz für Freigehege kann schnell und einfach am Freigehege befestigt werden. Es bietet einen idealen Sonnenschutz für Tiere, die im Sommer mehrere Stunden im Freigehege laufen.

CHF8.90