Tetra Test Nitrate NO3 10ml

JBL ProAquaTest pH 6.0–7.6 – pH water testJBL ProAquaTest pH 6.0–7.6 is a precise drop test for freshwater aquariums. It comes with a laboratory comparator system, colour scale, 2 glass cuvettes and reagent – sufficient for approx. 80 measurements.The JBL ProAquaTest pH 6.0–7.6 is an easy-to-use drop test for accurately determining the pH value in freshwater aquariums. The measuring range from pH 6.0 to 7.6 is particularly suitable for community aquariums, planted aquariums and aquascapes where a slightly acidic to neutral pH value needs to be maintained. A stable pH value is important for the well-being of fish, shrimps and plants. As many dissolved substances in the water are affected by the pH value, significant fluctuations should be avoided. The JBL test helps to detect changes at an early stage and to check water parameters regularly. Thanks to the laboratory comparator system, any natural colouration of the aquarium water is compensated for. To do this, one cuvette is filled with aquarium water and reagent, whilst a second cuvette serves as a control sample. The value is then read off the colour scale. The test kit is sufficient for approx. 80 measurements and contains reagent, 2 glass cuvettes with screw caps, a pipette, a comparator block and a colour scale.Your benefits at a glanceDrop test for determining the pH valueMeasuring range: pH 6.0–7.6Suitable for freshwater aquariumsIdeal for community aquariums, planted aquariums and aquascapingPrecise monitoring in the slightly acidic to neutral rangeLaboratory comparator system compensates for the water’s natural colourEasy to use with colour changeFor approx. 80 measurementsHelps to detect pH fluctuations at an early stageInstructions for useFill the cuvettes with aquarium water in accordance with the instructions. Add the reagent to one cuvette, place both cuvettes in the comparator block and compare the colour with the colour chart provided. After the measurement, the cuvettes and syringe should be rinsed thoroughly with clean water.When setting up a new aquarium, JBL recommends measuring the pH value daily during the first week. After that, a check once a week is usually sufficient, provided no particular problems or significant changes occur in the aquarium.Zoo Roco TipThe pH value should always be considered alongside other water parameters such as KH, GH, nitrite and nitrate. Regular monitoring is particularly advisable when using CO₂ fertilisation, carrying out water changes or keeping sensitive fish and shrimp species.

Dennerle KCL solution Ideal care for pH electrodes The Dennerle KCL solution ensures the long-term storage and care of pH electrodes. With its special formula, it guarantees optimal moisture to prevent drying out and measurement errors. This solution extends the service life of your pH probe and ensures precise and reliable measurement results in your aquarium. Product benefits Protection against drying out: Ensures correct storage and prevents pH electrodes from drying out. Longer service life: Extends the service life of your pH probe through regular use. Precise measurement results: Helps maintain the measurement accuracy of the pH probe. Easy to use: Direct application for the long-term functionality of your pH electrode. High quality: For reliable results – Dennerle stands for certified aquarium quality. ApplicationFill the Dennerle KCL solution into the storage solution of your pH electrode to keep it moist during storage and extend its service life. Regular use protects against drying out and ensures precise measurement results.

Digital pH meterThis high-precision instrument has been specially developed for determining the pH value of water. With its user-friendly operation and fast response time, it is a practical tool for anyone who wants to determine the quality of their water. Whether for the home aquarium, the garden pond, the pool in the garden or for checking osmosis and drinking water - the ARKA myAQUA® pH meter provides reliable measurement results.It is ideal for regular monitoring to ensure the well-being of aquatic life or to guarantee water quality for human consumption. The importance of a balanced pH value cannot be overestimated, as it is one of the key factors in maintaining a healthy water system.The ARKA myAQUA® pH meter makes it easier than ever to keep an eye on this critical parameter. Thanks to its compact size and robust design, it is suitable for both home use and professional applications. The simple handling enables even inexperienced users to take precise measurements and thus actively contribute to the care of their water environment.Measuring range: 0.00 - 14.00 pHMeasuring gradation: 0.01 pHAccuracy: +/- 0.01 pHOperating temperature: 0 - 60 °C

Digital pH/TDS/EC meterThe ARKA myAQUA® pH/TDS/EC meter is an advanced water analysis tool designed for comprehensive and accurate testing of various water quality parameters.It can be used to quickly and accurately measure total dissolved solids (TDS), electrical conductivity (EC), pH and temperature in water and other liquids.Its versatility makes it an indispensable tool for monitoring and maintenance in aquariums, ponds, pools and in the treatment of osmosis and drinking water.Whether it is about the health of aquarium inhabitants, the quality of swimming pool water or the safety of drinking water - the ARKA myAQUA® pH/TDS/EC meter provides reliable data that you can always rely on.Measuring range:pH: 0.00 - 14.00 pH TDS: 0 - 9999 ppm EC: 0 - 9999 µS/cmMeasuring gradation: pH: 0.01 pH TDS: 1 ppm EC: 1 µS/cmAccuracy: pH: +/- 0.05 pH TDS: +/- 2% EC: +/- 2%Temperature: 0 - 60 °C 32 - 140 °FATC: 0 - 60 °C 32 - 140 °F

SuperFish Digi Test EC-TDS3-in-1 TDS meter with plug&play function. High performance and fast test results.SuperFish Digi Test EC-TDS. Accurate 3-in-1 TDS meter for. Aquarium and pond water.Measures 3 different values: conductivity (EC), total dissolved solids (TDS) and. Temperature in Celsius (°C) and Fahrenheit (°F).Calibration is not required.The meter has an automatic Temperature compensation function.Automatic shutdown after 5 minutes. UseRemove the protective cap before use.Press the on/off button.Submerge the EC-TDS meter up to the Immersion line into the water. The meter is NOT waterproof, never submerge it beyond the immersion line into the water.The test results are saved automatically after 5-10 Seconds automatically saved. To achieve a better temperature measurement, press CLEAR and repeat the Test. The test results can also be stored by Pressing HOLD to save.Take the meter out of the water, to read the test results.Press the MODE button to toggle between the test modes (ppm, μS/cm, °C and °F).Pressing the CLEAR button will clear the test results are cleared for a new measurement.Wait 30 seconds before starting a new start a new measurement.Wipe the electrode clean, switch off the turn off the meter and replace the protective protective cap back on.Avoid heat and direct sunlight.Care : Keep the electrodes clean and dry. Always close the meter with the protective cap. Please note!  The color change of the display (green/red) has no meaning..

SuperFish Digi Test pHDigital ph meter for aquariums and pond water. This digital meter measures ph with an accuracy of up to 0.02 units, has an automatic calibration function and makes measuring ph much easier.Accurate pH meter for aquariums and. pond water.Measures pH from 0 to 14 with an accuracy of up to 0.02 units.The device features an automatic calibration function for 1-point (6.86) and 2-point calibration (4.00 - 9.18).Calibration powder is included.Automatic power off after 5 minutes.UseRemove the protective cap before use.Press the power button. Submerge the pH meter up to the Immersion line into the water. The meter is NOT waterproof, never immerse the Never immerse the meter beyond the immersion line. beyond the immersion line into the water.Wait about 30 seconds until the reading is numerically constant.Read the pH of the water.Rinse the electrode with distilled water. rinse, dry with a cloth and put the protective cap.Avoid heat and direct sunlight. 1-point calibration 6.68 The calibration accuracy is ± 0.1 pHDissolve the pH 6.86 buffer powder in a beaker with 250 ml of distilled 25°C warm water.Dip the pH measuring instrument into the water with the pH 6.86 solution and wait about 30 seconds.Press and hold the CAL button for 5 seconds.The display will begin to flash 6.86. When it stops flashing, the pH meter has been calibrated.Rinse the electrode with distilled water. rinse with distilled water, dry with a cloth and put the Put on the protective cap. 2-point calibration 4.00 and 9.18 The calibration accuracy is ± 0.02 pHDissolve the pH 4.00 buffer powder in a beaker with 250 ml of distilled 25°C warm water. Dissolve the buffer powder pH 9.18 in another beaker.Dip the pH meter into the water with the pH 4.00 solution and wait about 30 seconds.Press and hold the CAL button for 5 seconds.The display will begin to flash 6.86.Press the CAL button briefly immediately.The display will flash 4.00. Wait until the flashing stops.Rinse the electrode with distilled water. water.Now immerse the pH meter in the Water with the pH 9.18 solution and wait about 30 seconds.Press and hold the CAL button for 5 seconds.On the display begins to flash 6.86.Press the CAL button immediately briefly.On the display flashes 4.00. Press the CAL button again immediately.On the display now flashes 9.18. If it stops stops flashing, the pH meter is calibrated.The electrode with distilled water Rinse with distilled water, dry with a cloth and put the protective cap on.Care: Keep the electrode clean and dry. Always close the meter with the protective cap. Warranty 1 year manufacturer's warranty. Damage due to improper use (battery leakage, water damage) is not covered. Lift the proof of purchase for proof of warranty. for proof of warranty. The warranty will be voided without proof of purchase! The batteries supplied free of charge have a life of one year. If they are empty at the time of the empty, you must replace them yourself. replace them yourself.

Seneye Home - Freshwater Aquarium - Automatically tests multiple life critical parameters temperature - constantly monitors water temperature, so you can get an alert if your heater breaks free ammonia - monitors the highly toxic free ammonia (NH3) at very low levels, so you can stop your fish from dying from Ammonia posioning pH monitoring - the seneye monitors pH in your aquarium or pond water between 6.4 and 9. This range is ideal for most aquatic life and by monitoring this range increased accuracy has be achieved. Total Light - monitor your light levels over the course of the day and know if if your lights fail. water level - readings are only taken when the seneye device is in water, no false readings.   Easy to install, simply drop in Constantly watching your aquarium, 5600 readings per month Customisable alerts, directly to e-mail and SMS * Upload results and get straightforward advice * USB connection with multiple connection options, including optional USB power adaptor *seneye+ required for some features. system requirements Windows PC with internet connectivity running Windows 7, 8, 10 32/64bit - Not compatible with Belkin Base and virtual USB extenders.Full speed USB 1.0 portMinimum 1Ghz processor and 128mb RAMInternet Browser: Internet Explorer 9.0+, Firefox 4.0+, Safari 4.0+Download of seneye connect application required from seneye.com Ever lost a fish and not know why? Ever experience new tank syndrome and wished there was a way of knowing when the water is safe for your fish? With a seneye Home it’s now possible for even the most inexperienced fish keeper to be successful and become an expert. Automatic monitoring with a seneye Home can save fish from the devastating effects of ammonia poisoning, as well as from harmful swings in pH and temperature. The intelligent software can even alert the you before there is a problem, so you can relax and enjoy without having to worry – all this and it’s so simple to use. As the seneye devices are USB there are multiple connection options available. When connected to the Power Adaptor readings are stored every hour and flashing lights on the device indicate if there is a problem. Readings are stored for 35 days and are automatically uploaded once reconnected to a PC.

JBL ProScan - Water analysis via smartphone app JBL ProScan - Water analysis with evaluation via smartphone app With JBL Pro Scan, the current aquarium water values can be determined quickly and easily via smartphone app. All you need to do is install the free JBL app from the Apple AppStore or Google PlayStore on your smartphone. Basic set: Contains 24 analysis strips (GH, KH, pH, nitrite, nitrate, chlorine and CO₂ calculation) with associated JBL ProScan ColorCard. The colour chart serves as a reference when scanning the analysis strip. The result is evaluated and, if necessary, instructions are displayed on how the water values can be optimised. The corresponding app is available free of charge. Refill set: 24 analysis strips for digital evaluation with the JBL ProScan app. Depending on the area of application, the app can be used in "Aquarium fresh water", "Garden pond water" and "Water" mode. If "Aquarium freshwater" and "Water" are selected, the app also automatically calculates the current CO2 content in the water from the values determined for pH and KH. Based on the results of the analysis, the app provides specific recommendations for action and information on how to achieve ideal water values. The "Water" function only provides the pure water values. The recording of the analysis strips and the calibration with the ColorCard should be carried out in bright daylight or artificial light. Direct sunlight should be avoided. The specified sequence of the app should always be followed during the measurement to ensure correct results. The app can be used in German and French. Instructions for use:After starting the app for the first time, a one-off calibration using the JBL ProScan ColourCard is required. This calibration can be carried out quickly and easily by anyone. Afterwards, the water values can be analysed and evaluated immediately in conjunction with the JBL ProScan analysis strips. Immerse the analysis strip in water for 1 second, shake it off and then place it on the reference colour card (JBL ProScan ColorCard). Select the water type with the free ProScan app (in the Apple store & Google PlayStore), scan the colour card like a QR code and wait briefly for the result (waiting time is carried out by the app). The result is displayed directly in mg/l, ° hardness and the pH value. The values are evaluated by the app (good - medium - bad) and recommendations for optimisation are displayed. The type of ambient light is automatically evaluated and taken into account for colour calibration. The JBL ProScan analysis strips have been specially adapted for evaluation with the colour chart. No accuracy can be guaranteed with other test strips.

JBL Test Combi Set plus Fe Test case with the most important water tests in freshwater aquariums, incl. iron test Monitors the water values in aquariums simply and reliably. Determines: pH value, carbonate hardness, iron, nitrite, nitrate, CO2 (calculation via table) Easy to use: syringe for exact measurement of the water quantity, detailed instructions for use Laboratory comparator system to compensate the inherent water colouring, analysis record sheet, instructions for problem solving, CO2 table Child-proof reagent bottles, water-proof plastic case, refillable kit Package contents: 1 test case for planted aquariums, 5 reagents, 3 glass vials, syringe, dosing spoon, comparator block, plastic cuvette, colour charts, analysis record sheets, instructions Healthy aquariums with conditions close to nature The right water values are dependent on the fish stock and the plants in the aquarium. Even if the water looks clear it can be contaminated. With bad values diseases or algae can appear in the aquarium. To maintain a healthy aquarium with conditions close to nature it is important to check and adapt the water values regularly. With the JBL Test Combi Set you can determine the 5 most important water values in your aquarium. Precise measurement of the following values: pH test: acidity of the water from 3.0 to 10 KH test: pH stability of the water (carbonate hardness) Fe test: iron value to control the fertilisation NO2 test: toxic nitrogen compound NO3 test: reason for algae growth To determine the CO2 content you just need to measure the pH and KH values. From both values arises the CO2 content in the water, which then can be referenced from the enclosed table. You can analyze your measured water values in the JBL Online Laboratory free of charge and receive recommendations.

JBL Test Set CO2 / pH Permanent - easy monitoring of water values Simple and reliable monitoring of aquarium water parameters. Continuous direct measurement of the optimum pH value and carbon dioxide content for freshwater aquariums Permanent test for fertiliser control: Add reagent to the permanent test device and attach to the glass in the aquarium using suction cups. Compare the reagent colour with the colour scale sticker and read off the value. Display of pH value (6.4 - 7.8) and CO2 content can be measured Online laboratory: Regular checks for a healthy aquarium with near-natural conditions. Water tests in the form of rapid tests or colour change tests are available for every water analysis. Aquarium water testing for healthy, clear water Scope of delivery test set: 1 permanent test, test set CO2 Permanent incl. permanent test, 2 reagents and adhesion colour card Scope of delivery refill: 2x 10ml CO2 Permanent plus ph

JBL PROAQUATEST EASY 7in1 Test strips for quick aquarium water testing Test strips for testing 7 important water values in 1 minute: quick test for general guidance when testing aquarium, pond, well and tap water Easy to use: Move the test strip in the water for 2-3 seconds. Remove the test strip. Let the water drain off sideways. Compare the test strip with the colour scale on the packaging after 1 minute. Read off the CO2 value in the table Determines the following water values: chlorine, acidity (pH), general hardness (GH), toxic nitrite compound (NO2), cause of algae (NO3), pH stability (KH) and main plant nutrient (CO2 content using the table) Package contents: test strips EasyTest 7 in 1 on colour scale and CO2 table. Contents: 50 test strips

JBL pH Test 3.0-10.0 - Quick test to determine the acidity in ponds as well as in freshwater and marine aquariums Easy and reliable monitoring of the water values of aquariums and ponds. Determines the ideal pH values for freshwater and seawater Quick test: fill plastic vial with sample water, add reagent, read value of the sample off colour chart When to use: for setting up a new aquarium: daily for one week, afterwards weekly 1 quick test, pH Test 3-10 Test for approx. 80 measurements Healthy aquarium/healthy pond with conditions close to natureThe right water values are dependent on the fish stock and the plants in the aquarium/pond. Even if the water looks clear it can be contaminated. With bad values diseases or algae can appear in the aquarium/pond. To maintain a healthy aquarium/pond with conditions close to nature it is important to check and adapt the water values regularly. For each water analysis JBL provides water tests in the form of quick tests or colour change tests. These determine a certain value or several values in one go. With these water tests you can recognise algae problems and negative nitrate, nitrite, potassium, magnesium values etc. Why test?The well-being of aquarium and pond dwellers and the growth of aquatic plants depend to a large extent on the pH level being kept as constant as possible. The pH level can also affect many substances dissolved in the water. Fluctuations in the pH level are definitely to be avoided.