Nano LED Light A small LED lamp, perfect for your nano tank. The simple design fits any aquarium and does not distract the focus from the fish and aquarium. The lamp can be attached to aquarium with up to 12 mm glass thickness, making it suitable for any nano tank. The lamp also has an aluminum reflector for optimal lighting. The two small chips emit the light and are both 2 watts each. The two chips are held by a bayonet ring and can also be easily replaced. A transparent insert on the bottom of the lamp protects against splashing water. The lamp can be easily attached by means of clamping device and easily aligned with gooseneck. Reflector and gooseneck with black paint.2 x 2 W daylight SMD LED chipsEasy to replace light chipsVery long life Up to 12 mm clamping width

Sera LED extension cableExtension cable for the Sera LED series. It may happen that when you connect your Sera LED, you noticed that your cables are not long enough. For such cases, there is the Sera extension cable. The cable 1.2 m long and can make your life much easier.1.2 m cable. To connect to Sera cable connections

Sera Tube Holder Clear 2 pcsClear acrylic tube holder for Sera LED tubes.The holder allows you to hang the light as you wish. The bracket is made of a solid acrylic and its simple design ensures that the aquarium is still the main focus. Adjustable up to 13 mm. For hanging Sera LED tubesFixed acrylic glass

Sera ballastFor powering the Sera LED Tubes.The Sera Driver is necessary for powering the Led Sera Tubes. However, it does not only output current, but can supply multiple tubes with a Triple Cable. The current capacity is optimally utilized thanks to the Driver. The device is necessary for a power supply of the Sera TubesRegulates the power supply if multiple tubes are connected. The recommendation for wattage distribution is as follows: Max. Consumption < 20 watts sera LED ballast 20 V DC 1 A Consumption < 60 watts sera LED ballast 20 V DC 3 A

LED Triple CableA triple power distributor for Sera LED Tubes.The Sera Triple Cable, together with a Sera Driver, can give power to three different lamps or dimmers. The distributor gives the optimal amount of power for each lamp connected.

LED Daylight sunrise An LED lamp that perfectly simulates a natural daylight. The Daylight Sunrise lamp can perfectly simulate the sunset and sunrise with its light color spectrum and with a Sera Light dimmer. In an aquarium with fish, the majority of which swim higher up, it is important to give them natural lighting that resembles the sun. The lamp can simulate foggy days and a misty sky with its color spectrum of 6000 to 8000. Available in different sizesSimulates sunrise - sunsetFor fish that like to swim higher up

Sera LED Digital DimmerWith the Digital Dimmer, you can control your Sera LED lamps. The dimmer makes it possible for you to change the brightness and light intensity in the aquarium. This means you can always adjust the brightness to your fish inhabitants. The dimmer can also be programmed to turn the light on and off, as well as the whether the lighting slowly increases or decreases. In combination with a LED Sunrise Tube Change and the adjustable time, you can achieve perfect a sunrise and sunset. For an even greater natural feeling you can also determine the cloud situation.Compatible with all Sera LED productsSimulate natural weather 

LED cool daylightNatural bluish daylight for strong color expressionThe Cool Daylight is suitable for fresh and saltwater aquariums. The beautiful bluish light from the lamp enhances the color intensity of some fish, making them stand out more. In marine aquariums, the bluish daylight creates a depth effect similar to natural light in the sea. The fluorescence of corals is also enhanced by the reef light. Enhances the bluish color in some fishHhigh light intensity Available in various sizes

LED Plantcolor Sunrise LED Lampe mit optimaler Kevin Anzahl für einen gesunden Pflanzenwuchs.Bei Aquarien mit einem festen Pflanzenwuchs ist es essenziell, die richtige Beleuchtung zu haben. Die LED Plantcolor Sunrise, ist hier genau das richtige. Die Lampe ist perfekt auf das optimale Pflanzenwachstum abgestimmt. Sie wurde so entwickelt, dass sie ganz speziell die Photosynthese der Pflanze fördert. Blau und rot Anteile in der Lampe bringe ausserdem die Farbe Ihrer Pflanzen zur Geltung und erzeugen einen schönen Effekt. Ausserdem simuliert die Lampe einen Sonnenuntergang und kann ihrem Aquarium noch ein ganz anderes Flair geben.Fördert die PhotosyntheseEs lässt Ihre Pflanzen zur Geltung kommenSimuliert einen SonnenuntergangIn verschiedenen Grössen erhältlich

Ultra seal fluorescent lighting controller A controller for lighting tubes. Comes with waterproof ultra seal lamp leads, universal mounting brackets and starter.

JBL LED Solar Nature, JBL LED Solar Effect and JBL LED Solar Control WiFi An absolute special offer - switch to LED lighting today and benefit from this unique offer. You get two lights plus the WiFi Control for a one-off special price! Click here for the individual product descriptions: LED Solare Nature LED Solare Effect LED Solare WiFi Control

LED Controll by JBL With the remote control included in the JBL LED SOLAR Natur you have the possibility to gradually dim the light and choose from three color temperatures.As soon as you complete your JBL LED SOLAR Natur (ideally in combination with JBL LED SOLAR Effect) with the JBL LED SOLAR WiFi Control, a new world of control opens up for you:With the help of the JBL LED SOLAR WiFi Control you can download biotope data from the Pantanal (southwestern Brazil) or from the region of the East African Grabenbruch lakes (Malawi-Tanganyika). Your LEDs will then adjust the local climate situations depending on the season (including dry and rainy seasons, thunderstorms & cloud cover).For a goldfish aquarium, the lighting will emphasize the beautiful colors and a company aquarium will set a light that will show a 10-day sun day, the right light for plants and strong colors for the fish. Thunderstorms and clouds are recorded by a random generator.For friends of aquariums (aquascaping) there is a light program similar to the program for community aquariums, but with higher light intensity.With each program, the acclimatization mode can be chosen initially, making it easy for your plants to adapt to the much brighter light from the previous fluorescent light fixtures without causing problems. Of course, any program can be chosen without acclimation.You can also set self-selected lighting situations in a manual mode.For all the mentioned programs you have 2 LED lamp types available: 1.) JBL LED SOLAR nature and 2.) JBL LED SOLAR Effect. If you only operate the JBL LED SOLAR Nature without the JBL LED SOLAR Effect with the JBL LED SOLAR WiFi Control, you can achieve all functions such as thunderstorms, clouds as well as sunrise or sunset, but without colored effects! For the control of JBL LED SOLAR Nature individually or in combination with JBL LED SOLAR Effect. Control biotope data, effects, thunderstorms, sunrise and sunset via WiFi from your mobile phone Easy to use: replace existing IR receiver with JBL WiFi Control and control desired effects via app 5 programs available + additional program for manual input (biotope South America & Africa, aquascaping plants, goldfish, community aquarium, any program with acclimatization) Biotope data includes dry and rainy season, cloud cover, thunderstorms and sunrise and sunset Scope of supply: WiFi control unit for insertion into the JBL LED SOLAR system for 2 lights, required app is always free

Juwel Lichtbalken Multilux LED Multilux LED inkl. LED-Röhren sind super geeignet für die Umrüstung von Leuchtstoff-Röhren auf die sparsamen LED-Röhren.einfach die Lichtbalken auswechseln und Strom sparenkeine Wärmeabgabe ans Wasser, wodurch die Wassertemperatur nicht steigt  

matrix swing adapter set The optimal solution for open pools, for installation on pool edges, light output approx. 60mm above pool edge Shapely pads for open aquariums and terrariums. The mounting brackets can be adjusted in width and adapted to the pelvic width. Corrosion-resistant stainless steel elements ensure that the matrix luminaire can be easily moved. Maintenance work in the dark is now a thing of the past. According to the matrix luminaires, all selected materials are UV and corrosion resistant. The aluminum alloy used - typical of daytime® - corresponds to the sea water resistance according to DIN 81249-1.

Tetratec Leuchtstoffröhre AL 15 15W (T8) Leuchtstoffröhre für Aquarien bis 60cm speziell für Tetra AquaArt 60L 15W T8 Die Tetratec AL Aquarium Leuchtstoffröhre wurde für Aquarien bis 60 cm und speziell für die Tetra AquaArt 60L Aquarien entwickelt

LED light modules for matrix The LED light modules are divided into 7 standard light colors or color temperatures.For an optimal result, you can combine modules with different light colors (white, blue, red) within a matrix light.From the warm white to the actinic blue light and combinations of these 7 different standards, almost any requirement for aquarium lighting can be met.Warm White 4,000K     white "warm" light     promotes optimal and healthy plant growth     emphasizes reddish plant colors     suitable for freshwater aquariums     PAR (photosynthetic active radiation): 4.73 μmol / s / watt     LED efficiency up to 180 lumens / watt Neutral White 6,000 K     neutral and natural color reproduction     promotes optimal and healthy plant growth     suitable for freshwater aquariums     PAR (photosynthetic active radiation): 4.50 μmol / s / watt     LED efficiency up to 180 lumens / watt Ultra White 8,000K     white, cool "daylight"     promotes optimal and healthy plant growth     suitable for freshwater and saltwater aquariums     PAR (photosynthetic active radiation): 4.30 μmol / s / watt     LED efficiency up to 180 lumens / watt Ultra Blue Red White 440-455nm + 620-630nm + 8,000K     white-blue, brilliant light with an increased proportion of red     Increase color brilliance in the aquarium     produces good fluorescence effects     suitable for fresh and saltwater aquariums     Ideal for African cichlids from Lake Malawi and Lake Tanganyika     Ratio Number of blue & red to white LEDs 1: 1: 2     PAR (photosynthetic active radiation): 4.26 μmol / s / watt     LED efficiency up to 110 lumens / wat Ultra Blue White 1: 1 440-455 nm + 8,000 K.     white-blue, brilliant light     Increase color brilliance in the aquarium     produces good fluorescence effects     suitable for fresh and saltwater aquariums     Ideal for African cichlids from Lake Malawi and Lake Tanganyika     Ratio Number of blue to white LEDs 1: 1     PAR (photosynthetic active radiation): 4.06 μmol / s / watt     LED efficiency up to 100 lumens / watt Ultra Blue White 3: 1 440-455 nm + 8,000 K.     blue-white, brilliant light     Increase color brilliance in the aquarium     produces increased fluorescence effects     suitable for fresh and saltwater aquariums     Ratio Number of Blue to White LEDs 3: 1     PAR (photosynthetic active radiation): 3.94 μmol / s / watt     LED efficiency up to 70 lumens / watt Royal Blue 440-455 nm     suitable for fresh and saltwater aquariums     ideal for corals     produces optimal fluorescence effects     PAR (photosynthetic active radiation): 3.81 μmol / s / watt

EHEIM power LED - Sicherheitsnetzteil EHEIM powerLED - Power supply Energy saving, TUV  certified safety power supply (20 Watts) To operate EHEIM power LED lights (daylight, plants, hybrid, actinic blue) 11, 16 and 20 Watts Capacity: max. 20 watt

Daytime Lichtsteuerung (Leistung-Erweiterungs-Modul PEM14 1-Kanal) Mit diesem Erweiterungs-Modul kann eine weitere Leuchte bis zu 100 Watt an die LC14 1-Kanal angeschlossen und wahlweise parallel oder mit einer abweichenden Helligkeit gesteuert werden. Für eco und cluster (nicht control) Verbindung zur LC14 1-Kanal über beiliegende Datenleitung Es können weitere PEM14 1-Kanal angeschlossen und hintereinander   gereiht werden. So können beliebig viele eco und/oder cluster mit einer LC14 betrieben werden.1) Je PEM14 ist auch ein weiterer Converter notwendig. Varianten Lichtsteuerung Daytime: Die elektronische Ansteuerung und Regelung der eco erfolgt durch die Lichtsteuerung “Lighting Control LC14″ in der 1-Kanal-Ausführung. Die max. Belastbarkeit ist abgestimmt auf den leistungsstärksten Converter. Diese beträgt 100 Watt. Erhältliche Leistungs-Erweiterungs-Module “PEM14 1-Kanal” ermöglichen eine Leistungserhöhung um 100 Watt je Modul. Eine einzelne Lighting Control LC14 steuert bis zu 255 Erweiterungs-Module. Diese Lichtsteuerung kann auch nachträglich in bereits vorhandene daytime® LED-Beleuchtungssysteme der eco-Linie integriert werden. Ebenso kann das manuelle 1-Kanal daytime® Dimm-Modul durch die elektronische Variante LC14 1-Kanal ersetzt werden.

LED attachable light for Nano fresh water aquaria NANO Style LED Modern design - elegant and compact Easy to install - for panes of up to 3-10 mm /4-5 mm thickness Excellent growing light with natural colour rendering Vivid light - 6500K, with shimmering effect Durable - Osram LEDs, 50,000 burning hours Safe - Low Voltage 100 Lumen (S) / 500 Lumen (M) Made in Europe State-of-the-art aquarium accessories from Dennerle combine functionality with design. The Dennerle Nano Style LED has been designed for Nano Cubes with a capacity of 2-10 liters (model S) or 10-30 liters (model M).        Model    For aquarium sizeS - 3W      2 - 10 litresM - 6W    10 - 30 litresL - 8W      30 - 60 litres

T5 adapter set To accommodate existing T5 lamp sockets (tube holders) The conversion of an aquarium with conventional light bars or covers for fluorescent tubes with a diameter of 16 mm (T5 standard) is done with this adapter set. The mounting elements can be adjusted in width and adapted to the lamp holder spacing.The matrix LED luminaires can be quickly and easily inserted into the existing tube holders (sockets). The matrix is not powered via the lampholders.The distance between the centre of the tube holder and the bottom edge of the matrix is 45 mm.The used aluminium alloy - typical for daytime® - corresponds to the seawater resistance according to DIN 81249-1. These adapters do not work in JUWEL® aquariums because the distance between the tube holders and the water surface is too small.Our adapter profiles are the optimum solution for JUWEL® aquariums.The dimension between the centre of the tube holder and the lower edge of the lamp is 45 mm.

EHEIM Power LED Connector for additional lights for EHEIM powerLED Stripes   Possible connection of several lamps to one power supply unit with Y-adaptor

A revolutionary solution to replace the traditional fluorescent T8 and JT5 lamps with LED lighting! The RetroLED lighting fits perfectly into your T8 or T5 cover plate and can also be used as additional lighting or in self-built aquariums. Now it's time for the change! LEDs have a longer life than conventional fluorescent lamps and consume up to 50% less energy. Advantages: Incl. Remote control with color change Complete set including ballast and waterproof end caps Plug and play; smooth transition Also suitable for JUWEL line T5 tubes Fits perfectly in your T8 and T5 cover plate without any modifications Safe due to low voltage, waterproof to IP68 Saves up to 50% electricity Long life span; 30000 burning hours Automatic time control with optional RetroLED controller

HeliaLux SmartControl - the clever control of HeliaLux task lights With the HeliaLux SmartControl, you can program and control your HeliaLux task lights conveniently via WLAN - whether with a mobile phone, tablet or PC. Individual controllable daily routines with 8 scenes Up to 7 light profiles programmable Separate control of the blue and white LEDs Blue moonlight illumination

Tetratec fluorescent tube AL 11 11W PL for aquariums Fluorescent tube for aquariums up to 40cm especially for Tetra Art 20L and 30L 11W The Tetratec AL Aquarium Fluorescent Tube has been developed for aquariums up to 40 cm and especially for the Tetra Art 20L and 30L aquariums.