SuperFish Digi Test EC-TDS3-in-1 TDS meter with plug&play function. High performance and fast test results.SuperFish Digi Test EC-TDS. Accurate 3-in-1 TDS meter for. Aquarium and pond water.Measures 3 different values: conductivity (EC), total dissolved solids (TDS) and. Temperature in Celsius (°C) and Fahrenheit (°F).Calibration is not required.The meter has an automatic Temperature compensation function.Automatic shutdown after 5 minutes. UseRemove the protective cap before use.Press the on/off button.Submerge the EC-TDS meter up to the Immersion line into the water. The meter is NOT waterproof, never submerge it beyond the immersion line into the water.The test results are saved automatically after 5-10 Seconds automatically saved. To achieve a better temperature measurement, press CLEAR and repeat the Test. The test results can also be stored by Pressing HOLD to save.Take the meter out of the water, to read the test results.Press the MODE button to toggle between the test modes (ppm, μS/cm, °C and °F).Pressing the CLEAR button will clear the test results are cleared for a new measurement.Wait 30 seconds before starting a new start a new measurement.Wipe the electrode clean, switch off the turn off the meter and replace the protective protective cap back on.Avoid heat and direct sunlight.Care : Keep the electrodes clean and dry. Always close the meter with the protective cap. Please note!  The color change of the display (green/red) has no meaning..

SuperFish BLADES to window scraper stainless steel10 stainless steel blades to window scraper from SuperFish.The sharp razor blade removes stubborn algae deposits from aquarium glassThe razor blade is easy to replaceStainless steel with long lifeContents: 10 pieces.

Plant tweezers curvedCurved plant tweezers for professional planting and care of aquatic plants in your aquascape or aquarium.Practical for planting, removal and maintenanceEnds with excellent gripStainless steel, long lifeAvailable in different sizes:27 cm37 cm48 cm.

Plant tweezers straightStraight plant tweezers for professional planting and care of aquatic plants in your aquascape or aquarium.Practical for planting, removal and maintenanceEnds with excellent gripStainless steel, long lifeAvailable in different sizes:27 cm37 cm48 cm.

SuperFish Digi Test pHDigital ph meter for aquariums and pond water. This digital meter measures ph with an accuracy of up to 0.02 units, has an automatic calibration function and makes measuring ph much easier.Accurate pH meter for aquariums and. pond water.Measures pH from 0 to 14 with an accuracy of up to 0.02 units.The device features an automatic calibration function for 1-point (6.86) and 2-point calibration (4.00 - 9.18).Calibration powder is included.Automatic power off after 5 minutes.UseRemove the protective cap before use.Press the power button. Submerge the pH meter up to the Immersion line into the water. The meter is NOT waterproof, never immerse the Never immerse the meter beyond the immersion line. beyond the immersion line into the water.Wait about 30 seconds until the reading is numerically constant.Read the pH of the water.Rinse the electrode with distilled water. rinse, dry with a cloth and put the protective cap.Avoid heat and direct sunlight. 1-point calibration 6.68 The calibration accuracy is ± 0.1 pHDissolve the pH 6.86 buffer powder in a beaker with 250 ml of distilled 25°C warm water.Dip the pH measuring instrument into the water with the pH 6.86 solution and wait about 30 seconds.Press and hold the CAL button for 5 seconds.The display will begin to flash 6.86. When it stops flashing, the pH meter has been calibrated.Rinse the electrode with distilled water. rinse with distilled water, dry with a cloth and put the Put on the protective cap. 2-point calibration 4.00 and 9.18 The calibration accuracy is ± 0.02 pHDissolve the pH 4.00 buffer powder in a beaker with 250 ml of distilled 25°C warm water. Dissolve the buffer powder pH 9.18 in another beaker.Dip the pH meter into the water with the pH 4.00 solution and wait about 30 seconds.Press and hold the CAL button for 5 seconds.The display will begin to flash 6.86.Press the CAL button briefly immediately.The display will flash 4.00. Wait until the flashing stops.Rinse the electrode with distilled water. water.Now immerse the pH meter in the Water with the pH 9.18 solution and wait about 30 seconds.Press and hold the CAL button for 5 seconds.On the display begins to flash 6.86.Press the CAL button immediately briefly.On the display flashes 4.00. Press the CAL button again immediately.On the display now flashes 9.18. If it stops stops flashing, the pH meter is calibrated.The electrode with distilled water Rinse with distilled water, dry with a cloth and put the protective cap on.Care: Keep the electrode clean and dry. Always close the meter with the protective cap. Warranty 1 year manufacturer's warranty. Damage due to improper use (battery leakage, water damage) is not covered. Lift the proof of purchase for proof of warranty. for proof of warranty. The warranty will be voided without proof of purchase! The batteries supplied free of charge have a life of one year. If they are empty at the time of the empty, you must replace them yourself. replace them yourself.

PROCRISTAL UV-CCrystal clear and healthy waterPoor lighting conditions, over-fertilization or even an excess of nutrients can have a negative effect on aquarium water and promote algae. Suspended algae lead to green turbidity, bacteria to whitish turbidity. The JBL Water Clarifier removes turbidity caused by bacteria and suspended algae. The aquarium water is passed through the stable, UV-resistant housing of the clarifier. The UV-C radiation kills the bacteria, other germs and suspended algae in the water flowing through. The efficiency of this UV-C water clarifier is particularly high because the glass bulb is surrounded by a polished, reflective stainless steel foil that reflects the UV-C radiation, thus doubling the efficiency. This can also have a positive effect on the elimination of sessile algae, such as filamentous algae, as their spores are also largely killed.No harmful side effectsNo change in water values / no negative effects on important cleaning bacteria in the filter.Easy installationConnect the water clarifier to the external filter or a separate water pump. Due to included 90° angle, any desired installation position can be achieved.SafetyThe JBL UV-C water clarifier is TÜV-tested and has a safety switch for automatic shutdown when the device is opened. The housing is UV-resistant and sturdy walls and has an LED lamp that indicates whether the UV-C burner is working .Difference from the previous model JBL ProCristal UV-C Compact:The function indicator lights are now located on the flat side of the electrical unit and the microswitch for automatic shutdown of the burner when the housing is opened (if the plug has not been pulled out) is changed to a magnetic safety switch. As a result, the electrical units of the previous models (Compact) do NOT fit the new ones (Compact Plus) and vice versa. Crystal clear and healthy water: 36 W UV-C water clarifier for fast and efficient removal of greenish and whitish turbidity in freshwater and saltwater aquariums as well as garden ponds.Space-saving installation: connection to external filter or separate pump. Inlet/outlet opening mounted in a practical way. Shortest installation length: 61 cmPartial disinfection up to 3000 litres aquarium (pump max. 1000 l/h) /30,000 l pond (pump max. 4000 l/h), against floating algae up to 800 l in aquarium (pump max. 1000 l/h) /up to 8000 l pond (pump max. 4000 l/h)TÜV tested, safety switch: automatic switch-off of the UV-C burner when the unit is opened. Sturdy, UV-resistant housing, 2-glass constructionScope of delivery: Complete UV-C unit, 5 m cable, UV-C burner 36 W, base: 2G11, wall bracket, V2A screws, hose connection sleeves for 12 to 40 mm hoses. Warranty: 2 (+2 years if the product is registered)

Söchting oxidizer MiniThe Söchting oxidizer Mini produces normal and activated oxygen in a patented process using the Söchting oxidizer solution and special ceramic catalysts. The activated oxygen breaks down toxins and putrefactive substances, thus improving the water quality and contributing to the well-being of fish and plants. The oxidizer Mini is designed for aquariums up to 60 liters. The oxidizer solution and the catalyst are already included in the delivery (2 x 50 ml).The water temperature indicates the operating time of the catalysts, at 25 degrees Celsius and one catalyst it is approx. four weeks. With two catalysts, it is approx. two weeks. At a higher temperature, the operating time is shortened and vice versa. Because of the drip-wise dosing, at times no oxygen bubbles are visible, although the unit is working. When the glass container is empty, the oxidizer must be refilled. It is best to do this only with the oxidizer solution, which you can buy again. If the oxidizer has been placed on a sandy soil, you should move it occasionally so that the soil under it does not become gammy.Does not need electricity to run.Easy to set up and maintain.Refillable Produces active oxygen for fish and plants.60 l aquariums.If the oxidizer is damaged, there is a risk that the H2O2 will leak out and this is toxic to the animals, so check regularly.

Söchting Oxydator WThe Söchting Oxydator W produces normal and activated oxygen using a patented process using the Söchting Oxydator solution and special ceramic catalysts. The activated oxygen breaks down toxins and putrefactive substances, thus improving the water quality and contributing to the well-being of fish and plants. The Oxydator W is designed for ponds up to 4000 litres. The catalyst is already included in the delivery. You have to buy the necessary solution. Foreign substances do not get into the solution. In winter it continues to work reliably even under a closed ice cover and brings oxygen down to the bottom where the fish stay over winter. An oxydator works with the oxydator solution as an oxygen carrier and with the catalyst to remove the oxygen. Catalysts last for several years and must first be replaced when their activity decreases significantly. This oxydator releases a total of as much oxygen as 20,000 litres of dissolved water and is sufficient for garden ponds up to approx. 4000 litres. In heavily polluted water or in larger ponds, it also brings about a great improvement in quality, but the dosage may then no longer be sufficient to prevent the occurrence of floating algae in particular. In this case, another device should be used. The higher the water temperature, the higher the oxygen demand of the organisms in your water. This law is followed by the release of oxygen by the oxydator. While one filling lasts 4-5 months in winter, it can be used up after just one warm summer month. When it needs to be refilled, you will see that the oxydator swims up to the water surface on its own. When this happens, wash out the ceramic cup with the solution and check for ice residue if necessary. If you have a strong OXYDATOR solution, first dilute it with distilled water. If the OXYDATOR remains under water for an unusually long time, you should take it out of the pond yourself. For further instructions and start-up, please refer to the instruction manual.    Does not need electricity to run.    Refillable.    Easy to install and maintain.    Produces active oxygen for fish and plants.    4000l pond.If the oxydator is damaged, there is a risk that the H2O2 will leak out and this is toxic to the animals, so check regularly.

Söchting oxidizer DThe Söchting Oxydator D produces normal and activated oxygen in a patented process using the Söchting Oxydator solution and special ceramic catalysts. The activated oxygen breaks down toxins and putrefactive substances, thus improving the water quality and contributing to the well-being of fish and plants. The Oxydator Mini is designed for aquariums up to 100l. The catalyst is already included in the delivery. You have to buy the necessary solution. We recommend that you use the 6% solution for the Oxydator D. If you use a stronger solution, dilute it only with distilled water. Foreign substances must also not be added to the solution. In tanks that have been used for a long time and have a high dirt deposit in the substrate, the Oxydator initially triggers a strong development of carbon dioxide, which will subside again as soon as the activated oxygen has worked off the reducing substances. Until then, please leave the previously used aeration in operation to expel the excess CO₂. In plant-free tanks, the CO₂ must, of course, be permanently expelled.Does not need electricity to run.Refillable.Easy to install and maintain.Produces active oxygen for fish and plants.100 l aquariums.If the oxydator is damaged, there is a risk that the H2O2 will leak and this is toxic to the animals, so check regularly.

OXYDATOR solventThe Oxydator solvent is available in 6 and 12%.For Oxydators A, D and W and should be dosed accordingly depending on the model.

Oxidizer Ceramic CatalystAn OXYDATOR catalytic converter, suitable for all models of the Söchtige Oxydatoren series. These ceramic catalysts only work with Söchtige Oxydatoren.

OXIDIZER mini solutionThe Oxidizer solution for the "OXYDATOR Mini".

Söchting oxidizer DThe Söchting Oxydator A produces normal and activated oxygen in a patented process using the Söchting Oxydator solution and special ceramic catalysts. The activated oxygen breaks down toxins and putrefactive substances, thus improving the water quality and contributing to the well-being of fish and plants. The Oxydator A is intended for aquariums up to 800 litres. The catalyst is already included in the delivery. You have to buy the necessary solution. Foreign substances are also not allowed in the solution. In tanks that have been used for a long time and have a high dirt deposit in the substrate, the Oxydator initially triggers a strong development of carbon dioxide, which will subside again as soon as the activated oxygen has worked off the reducing substances. Until then, please leave the previously used aeration in operation to expel the excess CO₂. In plant-free tanks, the CO₂ must of course be permanently expelled. You can determine how long the operating time of your oxydator is based on the amount of water, catalysts and the solution you need. You can determine how long your oxydator will run in the instructions for use.Does not need electricity to run.Refillable.Easy to install and maintain.Produces active oxygen for fish and plants.800 l aquariums.If the oxydator is damaged, there is a risk that the H2O2 will leak and this is toxic to the animals, so check regularly.

Microbe-Lift KH Booster 250gThe KH Booster has been specially developed to adjust the carbonate hardness (KH) in marine and freshwater aquariums. The KH Booster contains a special mixture of various elements that ensure healthy coral growth in marine aquariums. In addition, the targeted increase in carbonate hardness supports nitrification in the aquarium. In combination with the Microbe-Lift care products, the required water values can be adjusted in no time at all.Optimal, targeted increase in carbonate hardness (KH)For marine and freshwater aquariumsSupports healthy coral growthPromotes nitrificationTargeted increase of the KH value in marine and freshwater aquariumsEasy dosage with enclosed spoonSpecial formula supports coral growth

Flore 4 Plant – MicrofertiliserMacro fertiliser with main nutrientsSystem careWith NPK for main supplyFor aquarium plantsThe main nutrients nitrogen, phosphorus and potassium are of great importance for the healthy growth of aquatic plants.While in aquariums with many fish these substances are available in sufficient quantities through excretions and food residues, macronutrients are often in short supply in plant tanks with few or no animals. The consequence is poor plant growth.sera flore 4 plant was developed to supply aquatic plants in aquascapes and Holland tanks specifically with nitrogen, phosphorus and potassium in an optimal ratio - for healthy and vigorously growing plants. sera flore 4 plant is well tolerated by all invertebrates.50ml for 200l to 1000l250ml for 1000l to 5000l

flore 2 Ferro – Iron fertilizerIron fertilizer for splendid colour developmentSystem careAdditional iron for high-yielding plantsUV-stableFor splendid aquarium plantsRed or very fast-growing aquatic plants have a particularly high demand for iron.  Therefore, iron deficiency in the water occurs quickly, which can often be the case in heavily planted and intensively lit aquariums. However, the aquatic plants need the iron to develop their full colour splendour and for healthy growth.The new system fertiliser sera flore 2 ferro was developed especially for this case. It provides the plants with sufficient iron and thus promotes colour development.The special feature of the new iron fertilizer sera flore 2 ferro is the long availability of iron in the water. In many aquariums UV-C water clarifiers are used, which quickly damage normal iron complexes. As a result, the iron is only available for a very short time in a form that is available for the plants.Not so with sera flore 2 ferro. By using specially chelated iron, a long availability over several days is given. sera flore 2 ferro is free of nitrate and phosphate and well tolerated by all invertebrates.50ml for 200l250ml for 1000l

Flore 3 Vital - MicrofertiliserMicrofertiliser to strengthen resistanceSystem careWith essential micronutrients, trace elements and vitaminsFor aquarium plantsIn many aquariums there is a lack of vital substances in sufficient form. As a result, the plants are restricted in their growth, do not develop the desired colours or even wither away completely.sera flore 3 vital reliably closes these dangerous supply gaps and enables a constant level of essential micronutrients and vitamins through daily dosing. By adding very rare but important trace elements, the resistance of aquatic plants is promoted and your plants thrive in full splendour.The plants stay healthy and become less sensitive to external influences. sera flore 3 vital does not contain nitrate or phosphate and is well tolerated by all invertebrates.50ml for 200l250ml for 1000l

Flore 1 CarboCarbon fertiliser for optimal growthSystem careAlternative carbon source for aquarium plantsPlants need sufficient carbon for photosynthesis, but this is often not available in sufficient quantities in the water. Carbon deficiency is one of the biggest growth-limiting factors for aquatic plants.In order to provide the plants with the amount of carbon needed for optimal growth, the new system fertilizer sera flore 1 carbo was developed. It offers different efficient carbon sources for an active liquid fertilisation and is thus the uncomplicated alternative to the CO2 fertilisation system; but it can also complement it.In combination with the sera basic fertilizers, sera flore 1 carbo leads to a strong and healthy plant growth and thus to a naturally algae-free aquarium. sera flore 1 carbo is well tolerated by all invertebrates.50ml for 200l250ml for 1000l

Seneye Home - Freshwater Aquarium - Automatically tests multiple life critical parameters temperature - constantly monitors water temperature, so you can get an alert if your heater breaks free ammonia - monitors the highly toxic free ammonia (NH3) at very low levels, so you can stop your fish from dying from Ammonia posioning pH monitoring - the seneye monitors pH in your aquarium or pond water between 6.4 and 9. This range is ideal for most aquatic life and by monitoring this range increased accuracy has be achieved. Total Light - monitor your light levels over the course of the day and know if if your lights fail. water level - readings are only taken when the seneye device is in water, no false readings.   Easy to install, simply drop in Constantly watching your aquarium, 5600 readings per month Customisable alerts, directly to e-mail and SMS * Upload results and get straightforward advice * USB connection with multiple connection options, including optional USB power adaptor *seneye+ required for some features. system requirements Windows PC with internet connectivity running Windows 7, 8, 10 32/64bit - Not compatible with Belkin Base and virtual USB extenders.Full speed USB 1.0 portMinimum 1Ghz processor and 128mb RAMInternet Browser: Internet Explorer 9.0+, Firefox 4.0+, Safari 4.0+Download of seneye connect application required from seneye.com Ever lost a fish and not know why? Ever experience new tank syndrome and wished there was a way of knowing when the water is safe for your fish? With a seneye Home it’s now possible for even the most inexperienced fish keeper to be successful and become an expert. Automatic monitoring with a seneye Home can save fish from the devastating effects of ammonia poisoning, as well as from harmful swings in pH and temperature. The intelligent software can even alert the you before there is a problem, so you can relax and enjoy without having to worry – all this and it’s so simple to use. As the seneye devices are USB there are multiple connection options available. When connected to the Power Adaptor readings are stored every hour and flashing lights on the device indicate if there is a problem. Readings are stored for 35 days and are automatically uploaded once reconnected to a PC.

Webserver LAN and WIFI - Seneye Plug and play The seneye web server with WiFi module removes the need for a pc altogether and allows wireless connection from your seneye device to your router / modem The seneye web server will upload the data from your seneye home, reef, or pond device without the need for a pc in the house. You will then be able to view all your readings from a computer (pc/mac), tablet or smart phone from anywhere in the world via the seneye cloud.  

Seneye Reef - Saltwater Aquarium - Automatically tests multiple life critical parameters Automatically monitors multiple key parameters Constantly watching your aquarium, 5600 readings per month Healthier coral, integrated LUX, Kelvin and PAR light meter Early warning, intelligent software predicts future water conditions* Convenient alerts sent to e-mail and mobile phone* Access results worldwide, data stored online for easy viewing* Track your results with automatic graphing* USB connection with multiple connection options, including optional USB power adaptor *some features require seneye+ Windows PC with internet connectivity running Windows 7, 8, 10 32/64bit - Not compatible with Belkin Base and virtual USB extenders.Full speed USB 1.0 portMinimum 1Ghz processor and 128mb RAMInternet Browser: Internet Explorer 9.0+, Firefox 4.0+, Safari 4.0+Download of seneye connect application required from seneye.com Are your corals not as vibrant as you expect? Have you ever had an aquarium crash unexpectedly? Now with the seneye Reef you can continuously monitor and analyze key life-critical parameters in your saltwater aquarium to ensure that your corals and fish thrive. You can automatically receive alerts before conditions become toxic, giving you time to fix the problem without losing your fish. The integrated PAR, LUX, and Kelvin meter allows you to ensure that your lighting conditions are optimal, so your corals thrive and appear vivid. As the seneye devices are USB there are multiple connection options available. When connected to the Power Adaptor readings are stored every hour and flashing lights on the device indicate if there is a problem. Readings are stored for 35 days and are automatically uploaded once reconnected to a PC. The seneye Reef is also great for planted aquarium keepers! The light meter can help ensure the plants are getting the correct quantity and quality of light.

Seneye Slide - Set 3 months This pack includes 3 slides totalling 3 months seneye+

Seneye Webserver LAN Reliable connection to the seneye cloud  Computerless operation   Plug and play The seneye web server (SWS) allows you to make any seneye device work more efficiently and effectively. It allows you to use a seneye without a PC and view the results direct from your smart phone, tablet, or computer.  This version uses an ethernet connected to your internet router. Once connected you will get instant monitoring, not just across your home, but also the world via the seneye cloud.   To use the SWS outdoors, a seneye Dri box is the simplest way to connect up everything next to the pond. A Wi-Fi module can be added to this product.

Convenient and effective way to catch flatworms (planaria) without using chemicals Equip trap with food bait (JBL NovoTab), use suction pad and cord to hang it at an angle over the bottom and empty trap the following day Convenient emptying of the trap: open lower plug and upper screw top and rinse under running water Completely non-toxic in freshwater and marine water Ø 17 mm, 13 cm Package content: 1 complete planaria trap (13 cm long) with transparent cord and suction pad for slanted positioning Flatworms (Platyhelminthes):To this class of animals belong the unpopular planaria which sometimes massively reproduce in aquariums and then can become a disturbing pest. They mostly lead a hidden existence and appear only at night. After using a planaria trap many people are surprised how many flatworms were present in their aquariums! Since chemical means against planaria have mostly unwanted side effects, the JBL planaria trap is a very good alternative without harmful side effects!Flatworms in marine water:Flatworms in marine water can look very beautiful, such as slugs. But they can also cause problems for corals, when they increase alarmingly and infest the corals. There are Turbellaria which, extremely well camouflaged, even can’t be found on a closer look. This also includes e.g. the Acropora-eating flatworm which can infest stony corals and lead to serious damage. Through an iodine bath of the affected coral outside the aquarium (2 ml Betaisodona/l) the Turbellaria will be paralysed and can be flushed away with a strong water jet. The wrasse Pseudocheilinus hexataenia is considered as the recommended natural enemy of choice, as it can even recognise clutches of worms to eat them.