Thermo Socket PRO - lamp holder with hinge

Arcadia LampGuard Pro – Protective grille for your terrarium lightingWith the Arcadia LampGuardPro you can protect your terrarium animals from direct contact with the lighting. The lamp guard prevents animals from touching hot lamps, wrapping themselves around them or sitting on them. At the same time, the guard protects the lamp from direct contact with the animals.The specially designed wire mesh allows as much light and UV radiation as possible to enter the terrarium. According to the manufacturer LampGuardPro reduces the total light output by around 15 %.The chosen mesh design and the glossy coating ensure high light transmission whilst providing protection. You will need four suitable screws for assembly. Thanks to the integrated hinges on both sides, the cage can be opened to change the bulb once two screws have been removed. Multiple cable entry points facilitate cable routing and allow for use with different lighting systems.LampGuardPro is available in six lengths ranging from 410 to 1260 mm. Depending on the version, the protective grille is suitable for T8 lights, T5-HO lights and various Arcadia ProT5 and ShadeDweller systems.All versions are 100 mm wide and 50 mm deep.Your benefits at a glanceProtects animals from direct contact with hot lampsProtects the lighting from direct contact with animalsHigh light transmission thanks to a specially designed wire meshEasy bulb replacement thanks to hinges on both sidesMultiple cable entry points for suitable cable routingCoated, rust-resistant and wipe-clean surfaceSix lengths for different lighting systemsContents:LampGuardPro protective grille in the selected lengthInstructions for useChoose a protective grille that is suitable for your light fitting and its dimensions.CompatibilityLength: 410 mm > suitable for: ShadeDwellerPro (8W), MiniT5 (8W), T8 Standard (14W)Length: 510 mm > suitable for: T8 Standard 15 W Length: 660 mm > suitable for: T8 Standard 18/20 W, T5 High Output/ProT5 24 W, ShadeDwellerMax 14 W Length: 810 mm > suitable for: T8 Standard 25 WLength: 960 mm > suitable for:  T8 Standard 30 W, T5 High Output/ProT5 39 W Length: 1260 mm > suitable for: T8 Standard 36/38/40 W, T5 High Output/ProT5 54 WWidth and depth for all variants: 100 × 50 mm. Secure the lamp guard with four suitable screws and feed the cables through the designated openings. Disconnect the lighting from the mains before installation, cleaning or changing the lamp, and allow the lamp to cool down. Wipe the grille clean as required to ensure that deposits affect light transmission as little as possible.Zoo Roco Tip:  Before purchasing, check the exact model name and length of your light fitting. A protective grille does not replace the prescribed distances from the lighting. When setting up your enclosure, also bear in mind that even a light-transmitting grille blocks some of the UV radiation.

Arcadia LumenIZE Swing-Holder® Set by RebieWith the Arcadia LumenIZE Swing-Holder® set from Rebie, you can adjust the angle of your compatible terrarium lighting. This allows you to direct the light precisely onto the desired area and adapt the lighting to the layout of your terrarium. The brackets can be fitted quickly and easily.Your benefits at a glanceAdjustable tilt for precise light directionQuick and easy installationSuitable for all lengths of the Arcadia, LumenIZE T5 UV and Arcadia ProT5Also suitable for Arcadia nd Jungle Dawn LEDSuitable for the following Arcadia lights:LumenIZE T5 UVJungle Dawn LEDProT5Please note: These brackets are designed for the luminaires listed above. Please check the model number of your luminaire before purchasing.

Heat Lamp CageArcadia’s ‘Heat Lamp Safety Cage’ is a user-friendly, stylish product that simply slips over a lamp and a lamp holder (Ceramic Lamp Holder Pro).Heat lamp safety cages help to reduce the risk of burns and are therefore an essential accessory for all heat lamps used in a terrarium. The cage features a spring-loaded door at the bottom, which allows for easy lamp replacement, as well as flat eyelets for securing screws.The cage also has an opening for the power cable, ensuring everything stays neat and tidy. Remember to always use a suitable thermostat control system with the heating system and cage to both protect the animal and the keeper. 

Hobby UV-B Quick test With this test, you can easily and quickly see whether your source of UV-B rays continues to radiate them. To test this hold the card approximately 5 cm under the lamp and wait 10 seconds. A part of the card will change from white to purple, depending on the intensity of discolouration you can tell the strength of your UV rays. According to the manufacturer, this card can be used up to 500 times. Warning! Replace your UV-lamp at least yearly if not more often, this card should be used as an indicator to do so.

The Night Sky LED set imitates the light of the moon and makes nocturnal observations of reptiles and amphibians possible, without disturbing the animals perfect for nighttime viewing crates confortable night ambience no distrubance for the animals low power consumption no heat developement extendable installation in terrarium ceiling widespread illumination of the vivarium PnP connetors for easy installation Advantages of the LED technology are low energy consumption, low heat emission and a long life of the light emitting diodes. Therefore, illuminating terrariums all night long is possible, without hindering the natural nocturnal drop of temperature as with other light sources. Especially nightlight incandescent lamps consume a lot of energy and consequently produce a lot of unwanted heat as well. In addition their ability to illuminate the terrarium properly and allow nighttime viewing is limited.The energy consumption of the LEDs in the Night Sky LED set is merely 0,2W per LED. This is the most energy efficient way to illuminate a terrarium at night. The Night Sky LED set contains 3 moonlight LEDs and an electric transformer, with which up to 6 LEDs can be powered. Additional LEDs are available separately. The LEDs are connected to the transformer by a connector, which makes them easy to install. Mounted on the ceiling of a terrarium, they enable a well-balanced nocturnal illumination of the whole terrarium.

Amazonas Lamp Basket -The special metal protective grille supports the dissipation of heat and protects the animal from contact with the air. Prevents contact of reptiles with bulbs Protects against burning For fixed installation in the terrarium incl. screws to 160W Size: 14.5x14.5x14.5cm

Exo Terra Compact Top - Terrarium cover Supplied with built-in reflector but without bulb Suitable for Exo Terra terrarium lamps or incandescent lamps up to 26 W With built-in reflector Easy to install Recess for installing accessories The Exo Terra Compact Top is a compact terrarium lamp cover designed for the Exo Terra glass terrarium. The easy-to-install cover accommodates terrarium lamps or low wattage incandescent lamps. You can use a combination of different Exo Terra Repti Glo terrarium bulbs (PT2226 / PT2227 / PT2228) to achieve the ideal proportions of ultraviolet and visible light. A bulb such as the Daytime Heat Lamp increases the ambient air temperature. Additional accessories such as the digital Exo Terra thermometer or hygrometer and the Exo Terra thermostat or hygrostat can be slid into a special recess on the cover.

Exo Terra Light Dome - ceramic socket The Exo Terra Light Dome ceramic socket can accommodate either compact fluorescent lamps or incandescent bulbs. Compact size Extra deep, mirrored reflector dome Increases UVB radiation by up to 100%! With on/off switch and 180 cm long mains cable Ceramic socket 14cm or 18cm The Light Dome reflector lamp is perfect for use in Exo Terra terrariums. Because it is so small, it fits ideally on the mesh cover. The highly polished aluminium reflector increases the light output of UVB and UVA rays by up to 100%! The ceramic socket can accommodate either compact fluorescent lamps or incandescent bulbs. Combine several holders with special lamps to create the ideal lighting system. Light Dome 14 cm / 5.5”Ideal for use with all Exo Terra incandescent lamps (max. 75W) and all compact terrarium lamps (max. 26W). Light Dome 18 cm / 7”Ideal for use with all Exo Terra incandescent lamps (max. 150 W) and all compact terrarium lamps (max. 26 W).

Lucky Reptile Thermo Socket Plus This reflector light has an E27 porcelain socket, a high-quality steel reflector, a protective grille and a silicone supply cable. high-quality steel reflector with protective grille silicone supply cable up to 300W and suitable for use with Bright Sun E27 porcelain socket small or large The steel reflector focusses the light and also serves as a screen. The protective grille can be placed on the bottom of the reflector to prevent animals from coming into contact with the light source. The lights are supplied ready for use. The necessary accessories are included for installation in the terrarium, but the light must be dismantled for this. For a more convenient installation, a version with a plug-in connection is available. This can be attached to a surface without having to take it apart. The plug-in connection is also compatible with Bright Control ballasts. Plug and Play! A clamp for use as a clamp lamp is available as an accessory. There are two versions with different reflectors so that even large light sources do not protrude from the reflector. Thermo Socket Plus Reflector small: for all Bright Sun UV, Halogen Sun and Compact UV Sun. Thermo Socket Plus Reflector large: for rod-shaped energy-saving lamps and UV lamps. All versions are suitable for up to 300W and for use with the Bright Sun!

Time switch 24 hours for aquariums and terrariums Time switch mechanically White 24h aquariums, vivariums and other illuminants

Protective cage for lamps and radiant heaters Increases safety in the terrarium through reliable heat protectionIdeal for everyday use: changing bulbs without major dismantlingFlexible mounting – ideal for various terrarium lids and setupsMore pleasant lighting thanks to the anti-glare screen, without animals being able to touch hot partsThese extremely fine-mesh lamp guard cages reliably protect your reptiles from direct contact with the heat and light source – even small animals cannot get through. Installation is flexible, and the protective cage can be quickly detached from the ceiling panel for lamp replacement. A removable, internal anti-glare shield ensures pleasant lighting without the risk of burns.Available in two sizes:large: Protective cage: 26 x 16 x 16 cm / Mounting plate: 18 x 19 cmsmall: protective cage: 16 x 12 x 12 cm / mounting plate: 14 x 15 cm

JBL TempSet basic Installation kit for lamps in terrariums - For more safety in the terrarium: installation kit for lamps in terrariums. For more safety in the terrarium: installation kit for lamps in terrariums. For the safe operation of energy-saving and incandescent lamps, halogen spot lamps, neodymium spot lamps, UV spot lamps (only in a vertical position) and ceramic lamps Easy to install: mounting plate, screws and switch are pre-assembled Heat and dimension stable to 270 °C Package contents: installation kit for spotlights E27 in terrariums, TempSet basic Modelled on natureTerrarium animals are cold-blooded animals, which are strongly dependent on light, particularly on the quality and intensity of the light. Activity, food intake, digestion or rest phases are influenced by the change of day and night. Depending on the light source, there are differences in output and quality of the light. Safe light sourceThe installation kit is suitable for the safe operation of energy-saving and incandescent lamps, halogen spot lamps, neodymium spot lamps, UV spot lamps (only in a vertical position) and ceramic lamps. It is made of a dedicated high-tech material with heat resistance up to 270 °C. The installation is easy thanks to its pre-assembled mounting plate, screws and switch.