Heat Lamp CageArcadia’s ‘Heat Lamp Safety Cage’ is a user-friendly, stylish product that simply slips over a lamp and a lamp holder (Ceramic Lamp Holder Pro).Heat lamp safety cages help to reduce the risk of burns and are therefore an essential accessory for all heat lamps used in a terrarium.
The cage features a spring-loaded door at the bottom, which allows for easy lamp replacement, as well as flat eyelets for securing screws.The cage also has an opening for the power cable, ensuring everything stays neat and tidy.
Remember to always use a suitable thermostat control system with the heating system and cage to both protect the animal and the keeper.
LampGuard Pro
Lamp Guard Pro is a versatile lamp cage. Reliably protects animals and lamps and allows as much light as possible into the terrarium. Can be used with T8/T5 and
ProT5 lamps.Simple lamp replacementIntegrated hingesCoated and rustproofMultiple
cable entry pointsThis easy-to-use lamp cage has been developed by
experts to allow as much light as possible through the grid. This ensures a high level of protection while
maintaining a maximum level of essential UV-B.This
is achieved by using a specifically selected mesh size and shape, paint colour, and by applying a thick gloss coating.
This way, it is ensured that as much light as possible passes through the grid and your animals remain well supplied.Commercial covers/lamp cages can reduce the light flow
by 40 % when new, LampGuardPro reduces this to about 15 % of the total light energy and then remains quite stable. LampGuardPro
is easy to install and only requires 4 suitable screws. It
has also been fitted with hinges on both sides, so that only 2
screws have to be removed to allow a quick and easy
lamp change.Available in lengths 51 cm, 66 cm, 81 cm, 96 cm. This lamp guard is rust-resistant and can
be wiped down as part of your monthly maintenance, to
ensure as much light as possible passes through the grid to the
animals. LampGuardPro has also been designed with several
cable entry points. This means that LampGuardPro can be used with
reflected T8 and HO-T5 lamps with separate controllers and our
HO-T5 connection system "ProT5" UV-B.It is
important that we provide our animals with protection from all potential
sources of harm. This guard protects your animals from contact
with the lighting and also helps to secure electrical cables of the lamp.
Hobby UV-B Quick test
With this test, you can easily and quickly see whether your source of UV-B rays continues to radiate them. To test this hold the card approximately 5 cm under the lamp and wait 10 seconds. A part of the card will change from white to purple, depending on the intensity of discolouration you can tell the strength of your UV rays. According to the manufacturer, this card can be used up to 500 times. Warning! Replace your UV-lamp at least yearly if not more often, this card should be used as an indicator to do so.
The Night Sky LED set imitates the light of the moon and makes nocturnal observations of reptiles and amphibians possible, without disturbing the animals
perfect for nighttime viewing
crates confortable night ambience
no distrubance for the animals
low power consumption
no heat developement
extendable
installation in terrarium ceiling
widespread illumination of the vivarium
PnP connetors for easy installation
Advantages of the LED technology are low energy consumption, low heat emission and a long life of the light emitting diodes. Therefore, illuminating terrariums all night long is possible, without hindering the natural nocturnal drop of temperature as with other light sources. Especially nightlight incandescent lamps consume a lot of energy and consequently produce a lot of unwanted heat as well. In addition their ability to illuminate the terrarium properly and allow nighttime viewing is limited.The energy consumption of the LEDs in the Night Sky LED set is merely 0,2W per LED. This is the most energy efficient way to illuminate a terrarium at night.
The Night Sky LED set contains 3 moonlight LEDs and an electric transformer, with which up to 6 LEDs can be powered. Additional LEDs are available separately. The LEDs are connected to the transformer by a connector, which makes them easy to install. Mounted on the ceiling of a terrarium, they enable a well-balanced nocturnal illumination of the whole terrarium.
JBL TempSet basic Installation kit for lamps in terrariums - For more safety in the terrarium: installation kit for lamps in terrariums.
For more safety in the terrarium: installation kit for lamps in terrariums.
For the safe operation of energy-saving and incandescent lamps, halogen spot lamps, neodymium spot lamps, UV spot lamps (only in a vertical position) and ceramic lamps
Easy to install: mounting plate, screws and switch are pre-assembled
Heat and dimension stable to 270 °C
Package contents: installation kit for spotlights E27 in terrariums, TempSet basic
Modelled on natureTerrarium animals are cold-blooded animals, which are strongly dependent on light, particularly on the quality and intensity of the light. Activity, food intake, digestion or rest phases are influenced by the change of day and night. Depending on the light source, there are differences in output and quality of the light.
Safe light sourceThe installation kit is suitable for the safe operation of energy-saving and incandescent lamps, halogen spot lamps, neodymium spot lamps, UV spot lamps (only in a vertical position) and ceramic lamps. It is made of a dedicated high-tech material with heat resistance up to 270 °C. The installation is easy thanks to its pre-assembled mounting plate, screws and switch.
The Reptile Jungle Lamp Set with transformer
waterproof
low voltage lamp
perfect for rainforest vivariums
This special low voltage lamp is waterproof as to the IP68 standard, making it perfect for rainforest vivariums and turtle tanks where the use of normal, not humidity protected porcelain lampholders is risky or even not allowed. The Jungle Lamp is a 12V luminaire which requires a halogen transformer for operation. The installation inside the vivarium can be done with the supplied holding arms allowing to point the lamp in the desired direction. Available is a set which contains one Jungle Lamp and a transformer (20-105W). Additional Jungle Lamps can be purchased separately and attached to the transformer. A mixed operation with Thermo Socket LV lamps is alos possible. With its wattage range of 20W to 105W the transformer can operate a single 20W lamp but also multiple lamps with a maximum of 105W. E.g. you can attach two Jungle Lamps with 50W halogen lamps (2x50W = 100W) or three luminaires with 35W lamps (3x35W = 105W). The theoretical maximum is 5 luminaires with 20W lamps. The Jungle Lamp is designed for use with the Lucky Reptile Halogen Sun LV. The use of standard halogen lamps which project the heat to the back or side is not allowed.
The Exo Terra Light Bracket easily adjusts to fit most types of fixtures or can be used to regulate heat/light according to required terrarium conditions by moving the rubber washers
Light Dome or Wire Light suspension bracket
Easily adjustable
Extends life span of light bulbs
Suspends most light fixtures securely
Helps prevent accidental tipping
Prevents terrarium damage
The Exo Terra Light Bracket is designed to suspend the Exo Terra Light Dome or other types domes or wire fixtures above any Exo Terra Natural Terrarium or other glass terrarium securely. The Exo Terra Light Bracket easily adjusts to fit most types of fixtures or can be used to regulate heat/light according to required terrarium conditions by moving the rubber washers. Since the bulbs do not need to be moved after installation—together with increased ventilation—the light bulbs’ (basking lamps, Solar Glo, etc.) life span is drastically improved.
Thermo Socket PRO - lamp holder with thread - Ready to use vivarium lamp with porcelain lamp holder
lamp holder
with thread
ready to use
porcelain
excellent for use with the Lucky Reptile Bright Sun UV lamps
use of lamps up to 300W
Contrary to the simple Thermo Socket lampholder sets the Thermo Socket PRO are completely wired and ready for use. There are no electrical installations necessary.Special mounting accessories and a connector allow the terrarium installation without the need to take the lampholder apart.
The Thermo Socket PRO are also excellent for use with the Lucky Reptile Bright Sun UV lamps as their connector are compatible to the Bright Control ballasts which can simply be attached between lampholder and wall socket.The power lead has a silicon insulation allowing the use of lamps up to 300W including the Osram Vitalux.Of course the Thermo Socket PRO are also compatible to the Lucky Reptile Reflector Sets.
The Plug and Play solution!
Most Popular Model: with hinge! Lampholder can be directed as desired!
COMPACT CERAMIC LAMP HOLDER AND REFLECTOR
Can be fitted inside a vivarium or placed over a mesh top vivarium orbolted securely onto a bird cage.
Universal ceramic E27 fitting.
Directional light with multiple angles.
Switch on the cable.
Removable safety mesh.
High performance aluminium reflector.
Sturdy aluminium housing.
Lamp not includet
Twin : 60cm
Adapter Schweizer-Europe (3-pole)
A practical adapter for connecting all electrical devices with and without an earthed plug system in Schweizer.
Load capacity up to 10A7250V Watt.
Fuse: 10A/250V (5x20)
Suitable for all EU Schuko plugs in countries with earthing contact plug system such as D, F, B, CZ, PL, NL, E, P, S, FI, N, GR, TR and A.Max.
Bright Control Pro 3 / 35W - 50W - 70W
Electronic multiwatt - ballast for metal halide lamps
Switchable between 35W, 50W and 70W
Intelligent soft-start function
Fully wired
Special connector for easy installation
The ballast from Lucky Reptile is a multi-wattage ballast that covers three different watt variants.35Watt, 50Watt and 70Watt. That is the difference to the predecessor model, since now the possibility exists Bright Sun lamps of different Watt strength at a ballast to operate. The desired wattage can be conveniently adjusted via the slide switch on the side of the ballast.
The ballast from Lucky Reptile is specially designed for the corresponding lamps, as the ballasts affect the light spectrum and therefore the UV range.Ballast and metal halide lamp work as a unit and must be matched. Only then is it guaranteed that the animals are supplied with sufficient UV light in the optimal spectrum. The Bright Control Pro 3 powered by Philips ensures that it harmonises perfectly with the Bright Sun.
Zoo Med Reptisun T5 HO Terrarium Hood Lighting Unit
with special reflector for more light output
integrated ballast (starter)
with switch (on/off function)
for T5 fluorescent tubes
Installation:
The light can simply be placed on top of the terrarium (gauze or ventilation grille). Glass prevents UV rays from penetrating).We recommend controlling the light using a timer.
Note: The unit comes without suitable T5 tubes. These must be ordered separately.
We have the 10.0 tubes in our range, which according to the manufacturer are suitable for desert terrariums. As the UV rays decrease very quickly and are no longer measurable after just a few 10 cm, the 10.0 can be used for all animal species.
Zoo Med Reptisun T5 HO Hood Lighting Unit, 62 cm x 11 cm x 3 cm for 1 x 24 Watt, 55 cm HO T5 fluorescent tubeZoo Med Reptisun T5 HO Hood Lighting Unit, 80 cm x 11 cm x 3 cm for 1 x 24 Watt, 55 cm HO T5 fluorescent tubeZoo Med Reptisun T5 HO Hood Lighting Unit, 100 cm x11 cm x 3 cm for 1 x 39 Watt, 86 cm HO T5 fluorescent tube
CHF 65.90
❅
❆
❅
❆
❅
❆
❅
❆
❅
❆
❅
❆
This website uses cookies to ensure the best experience possible. More information...