Exo Terra Terrarium Mini Fan

Zoo Med Environmental Control Center - 6-way terrarium controller for temperature, humidity & lightThe Zoo Med Environmental Control Center is a comprehensive control unit for the automation of heating/cooling, humidity and lighting in the terrarium. With 6 slots, 2 temperature sensors and 1 humidity sensor as well as alarm and memory functions, it supports stable values and realistic day/night sequences.Advantages: 6 slots for heating, cooling, humidity and timer functions 2 temperature probes + 1 humidity probe for precise control Programmable night setback for natural temperature curves Alarm function for extreme values (temperature/humidity) Memory function for settings in the event of a power failure Total load up to 1850 W (combined, limited per channel)The Zoo Med Environmental Control Center is the central control point for modern terrarium technology. It automates temperature, humidity and lighting and helps to set constant husbandry conditions and a natural day/night rhythm. Ideal for reptiles, amphibians and planted terrariums where reliable control of the technology is crucial. Slots / channels (overview) 1: Dimming Heat - dims a heat source to maintain a constant temperature 2: Heat/Cool - switches heating or cooling depending on the setting 3: Humi/Dehumi - controls humidification or dehumidification (e.g. fogger/ventilation) 4: Timer - switchable with time program (additional consumers) 5 & 6: Day/Night - separate switching for day and night devices (e.g. light/night light) Important note: The dimming channel is not suitable for certain lamp types (e.g. some UV/special lamps). Please observe the manufacturer's instructions for the lamps used.FAQ 1. which terrariums is the control unit suitable for? For most terrarium set-ups with reptiles, amphibians or plant terrariums in which temperature, humidity and light are to be controlled automatically. 2. what exactly can the device control? Depending on the connected devices, it controls heat sources, cooling (e.g. fan), humidification (e.g. fogger/mister), dehumidification/ventilation and lighting via timer and day/night switching. 3. are sensors included in the scope of delivery? Yes, 2 temperature probes and 1 humidity probe are usually included (for immediate commissioning). 4. can a night setback be set? Yes, a night setback can be programmed so that the temperatures behave more naturally at night. 5. will the appliance continue to function after a power failure? The settings remain saved. Depending on the situation, it may be necessary to set the time again so that timer functions run accurately again. 6. do I also need a thermometer/hygrometer? Not necessarily, as the appliance works with probes. However, a separate measuring device may be useful for additional monitoring (e.g. at a different position in the terrarium). 7. which devices should not be operated on the dimming channel? Not every lamp or heat source is dimmable (e.g. certain UV/special lamps). Please always check whether the connected device is approved for dimming - otherwise use the switching channels (Heat/Cool).8. how to position the probes correctly? It is best to position the temperature probes where the target values are relevant (e.g. warm area and cool area). Position the humidity probe so that it does not hang directly in the water jet of a fogger in order to avoid incorrect measurements.

Terra Fan - Constant air circulation & optimum terrarium climateThe Terra Fan ensures reliable, constant air circulation and therefore a stable, healthy climate in the terrarium. Thanks to the integrated digital display and precise temperature and humidity sensor, you can keep an eye on all the important climate data at all times.With two adjustable speeds, the air flow can be optimally adapted to the needs of your terrarium animals and the terrarium furnishings. The Terra Fan effectively prevents waterlogging, mold growth and heat build-up and ensures fresh, evenly distributed air - a basic requirement for keeping many reptiles, amphibians and invertebrates.In tropical terrariums in particular, it contributes to a stable microclimate and improved air quality. Thanks to its compact, lightweight design, the Terra Fan can be positioned flexibly and is easy to install. It is operated via a standard USB power supply unit (5 V, min. 1 A, not included) and is therefore particularly energy-efficient.Product advantagesIntegrated digital display shows temperature & humidity in real timePrecise combination sensor for optimum climate managementTwo adjustable speeds for individual ventilationPrevents waterlogging, heat and humidity build-upEffectively minimizes the risk of mould growth and odoursIdeal in combination with Hygro System & Humidity Control IICompact, flexible design - easy to installUSB-compatible for uncomplicated operation (power supply unit not included)Technical data: DimensionsDimensions: 9.5 × 9.5 × 3 cmWeight: 158 gInput voltage: DC 5 V / 1 A (USB-compatible)Power: max. 5 WTemperature measuring range: 0 °C to 80 °CHumidity measuring range: 10 % - 95 % rHTemperature accuracy: ± 1 °CHumidity accuracy: ± 1 %Sensor cable length: 130 cmCable length USB connection: 130 cm

Trixie analogue Thermometer This analogue thermo-/hygrometer has a measuring range from -20 °C to 50 °CEasy to attach with adhesive strips on the back.Size: Ø 5 cm

Trixie thermo/hygrometer - analogThis analog thermo/hygrometer has a measuring range of -25 °C to 55 °C anda humidity measurement of 0 % to 100 %.Easy to attach with adhesive strips on the back.size: Ø 7.5 cm

Trixie thermometer and hygrometer (digital) Trixie thermometer and hygrometer for precise monitoring. visually very stylish device digital display ensures precise monitoring of temperature and humidity in the terrarium the measuring range is from 0 °C to 50 °C (32 °F to 122 °F) and 30 % to 90 % humidity easy to attach with suction cup size 3x6cm

Microprocessor-controlled temperature controller with inversion function for heating / cooling, night reduction of temperature and visual alarm. Night reduction of temperature possible visual alarm Inverting function for heating / cooling Activity indicator equipped with LED light high accuracy and easy to use robust Temperature sensor interchangeable 3m sensor cable easy to handle The temperature controller is equipped with an LED light for the activity display of connected heating or cooling units. When switching to the programming mode, the external device slot is switched off for safety reasons. To protect electronic components, a delay of 60 seconds is set between 2 switching states before the slot is reactivated. Short or short circuit of the temperature sensors are indicated as errors. The temperature sensor is equipped with a USB connector for defect replacement.

Lucky Reptile Thermo-Hygrometer Deluxe Pro The Thermo-Hygrometer Deluxe PRO has a combination remote sensor for humidity and temperature as well as a second temperature sensor. Combined remote sensor for humidity and temperature Values can be determined externally Min/max values are saved Switchable between Celsius and Fahrenheit The Thermo-Hygrometer Deluxe PRO has a combined remote sensor for humidity and temperature as well as a second temperature sensor. This means that all values can be determined externally and the device itself can be installed outside the terrarium. Min/max values are saved for all measuring points. Switchable between Celsius and Fahrenheit.

Combometer - Digital Thermo-Hygrometer with remote sensor The Exo Terra Digital Thermo-Hygrometer is a 2-in-1 precision instrument, equipped with a remote combined sensor for accurate temperature and humidity indication. This precision instrument has a programmable minimum/maximum memory setting which can be controlled with a single button. Durable and easy to use, the Exo Terra Digital Thermo- Hygrometer can be installed with hook & loop fastener (included), or by simply sliding it into position on top of the Exo Terra Compact Top or Linear Fluorescent Top. Accurate temperature and humidity indication Single button operated Combined remote sensor for temperature and humidity Minimum / Maximum memory Fits the Exo Terra Compact Top and Linear Fluorescent Top Canopies

Lucky Reptile Humidity Control 2 Hygrostat The proven, 100% reliable humidistat for the terrarium: Lucky Reptile Humidity Control 2! Digital humidity control with modern terrarium technology. Two circuits for different humidity settings day and night Real-time clock, times of day are defined overnight Integrated timer Constant humidity display Device can be switched between humidifying and dehumidifying Alarm function in case of deviation - Adjustable between 1% and 50% relative humidity Precise remote sensor Earthed sockets Switching capacity of max. 1000W Suitable for Mini Mebler, sprinkler system, humidifier ect. It has two time zones that allow different settings for day and night. A real-time clock is integrated in the device so that switching between day and night mode can be done flexibly via the time. A timer is also integrated, allowing you to set two ON/OFF times via the clock. The smallest time period is one minute. Other functions include an alarm function (visual and audible), the option to switch from humidifier mode to dehumidifier mode, e.g. for use with fans, and the option to influence the switching mode of the hygrostat. You can define the deviation at which the hygrostat switches. For example, a value of 15 can be selected, i.e. the humidifier is only switched on when the measured humidity is 15% below the setpoint. This can be useful to prevent the humidifier from constantly switching on and off and in nature the humidity also fluctuates. Devices with a maximum output of 1000W can be connected. The display constantly shows the measured humidity. The range is between 1 and 99%. Please note that the Thermo Control Pro 2 has a German plug! An adapter plug is therefore necessary. Two-pole devices can be connected to the controller.

Lucky Reptile Thermometer Deluxe for terrariumsThermometer Deluxe with 2 external sensorsElectronic Thermometer with 2 external sensors for measuring the temperature in tow different locations. Perfect for temperature monitoring inside the vivariums Measures temperature at two different locations External sensors with 150cm wire Tempareure range -50°C to 70°C This electronic thermometer has two external sensors which allow measuring the temperature in two different spots. The sensors can also be used for measurements in water. The device has a large display for easy readouts and a clock function.

Infrared Thermometer The Exo Terra Infrared Thermometer is a pocket-sized, lightweight thermometer that allows the instant measurement of the temperature on a surface or object. Hold the Exo Terra Infrared Thermometer to a specific object and press the button on the thermometer. The temperature is then shown on a large digital display. The thermometer can be used to determine the temperature at basking sites, in hiding places and incubation media or to measure the hibernation exercise temperature or the body temperature of your reptile. You can also measure the temperature “on site” during exploratory tours in the wild. To determine the temperature curve, the infrared thermometer measures the ambient temperature for as long as you keep the button pressed. As soon as you release the button, the last measured temperature is displayed. A small LED light helps you to measure in the right place and shows the diameter of the measured area. With this light, you can also examine places that are difficult to measure and rather dark, such as inside caves, behind branches, under foliage, etc.The Exo Terra Infrared Thermometer is an important tool for any terrarium keeper or field researcher. Instant measurement of the temperature on a surface or object Ideal for observing the temperature at basking sites or in the incubation medium Simply hold it on a spot & press the button Temperature display in °C or °F Switches off automatically after 15 seconds Batteries are included Great for exploring the great outdoors

Repti Planet thermometer and hygrometer (digital) Repti Planet thermometer and hygrometer for precise monitoring. Visually very stylish device Digital display ensures precise monitoring of temperature and humidity in the terrarium The measuring range is from 10 °C to 50 °C (50 °F to 122 °F) and 20 % to 90 % humidity Easy to attach with suction cup Size 3x6cmCaution: Never place the device directly next to the heat source or humidifier.