JBL water test potassium

Article no: CO-JB24130.00

CHF 34.90

Stock: 2

Available, delivery time: 1-3 days

Delivery between Tuesday, 21 April and Wednesday, 22 April
Variant (2)
product-image
Pick your accessory
CHF 14.50
Zahlungsarten
Product information "JBL water test potassium"

JBL K Potassium Test Set - Quick test to determine the potassium content in freshwater

  • Simple and reliable control of water values.
  • Checks the freshwater aquarium fertilisation by determining the ideal potassium value
  • Quick test: fill cuvette with sample water, add reagents, fill turbid sample water into special glass vial until underlying cross is no longer visible, read filled in quantity. This value is equivalent to the potassium content in mg/l
  • Use with diatom problems

Healthy aquariums with conditions close to nature
The right water values are dependent on the fish stock and the plants in the aquarium. Even if the water looks clear it can be contaminated. With bad values diseases or algae can appear in the aquarium. To maintain a healthy aquarium with conditions close to nature it is important to check and adapt the water values regularly.

For each water analysis JBL provides water tests in the form of quick tests or colour change tests. These determine a certain value or several values in one go. With these water tests you can recognise algae problems and negative nitrate, nitrite, potassium, magnesium values etc.

Why test?
Potassium is one of the macroelements which plants in freshwater absorb quickly and effectively within a few hours and can also store for a limited time. Growing plants require more potassium than other elements. As a result, potassium concentrations can drop to a minimum range, causing plant growth to stagnate, even if the aquarium water is fertilised regularly. Potassium levels in mains water are usually too low compared to those in natural biotopes, particularly with relation to calcium and magnesium concentrations.

Composition
Feeding recommendation
Technical details
Size information

0 of 0 reviews

Give us a rating!

Share your experience with the product with other customers.


Accessories

Accessories

JBL ProScape K Macroelements
JBL ProScape K Macroelements - Potassium plant fertiliser for aquascaping Additional care for plants: supplementary potassium fertiliser for aquascaping aquariums Dosing is dependent on intensity of illumination, Co2 supply and consumption. Healthy plant growth, prevents potassium deficiency Checking of dosage with JBL potassium test Healthy plant growth is based on the following three main pillars: A supply of light, a supply of CO2 and an adequate/optimal supply of mineral nutrients. The supply of nutrients is described by Liebig’s Law of the Minimum. According to this concept, the nutrient which is available in the minimum amount limits the growth of plants regardless of whether it is a microelement or a macroelement.  Microelements are trace elements which plants need in small amounts, whereas macroelements are used for growth in larger amounts.In a well-planted aquarium, both microelements and macroelements are consumed in large amounts. Particularly when the fish population is small, the microelements, as well as the macroelements of nitrogen, phosphorous and potassium, quickly drop down to the minimum. The macroelements can easily be supplied by using JBL ProScape NPK Macroelements or by adding each of the individual components, nitrogen, phosphorous, potassium and magnesium, separately. If the latter procedure is selected, it is recommended to check the water values with the JBL Test Sets each time. Potassium plays an essential role in all vital functions. In plants, for example, potassium is directly involved in stomatal regulation. In addition, potassium carries out important functions in the regulation of enzyme activities in the cells. Potassium is the third most important element of the macroelements taken up by plants. These are able to take up more potassium than they actually need and store it in the tissue. In nature, there are unlimited amounts of potassium available. In tanks which emphasise plants, though, potassium very quickly drops down to the minimum, so that it becomes a limiting factor for plant growth.The concentrations of potassium in the drinking waters usually used in aquariums vary considerably, depending on the water supplier. However, drinking water generally tends to have low potassium levels, so that it is usually far below the recommended 10-30 mg/l. It is advisable to determine the current potassium concentration of the water with the JBL K Test Set in order to find the right dosage of the JBL ProScape K Macroelements fertiliser.JBL ProScape K Macroelements supplies tank water with potassium in the form of water-soluble potassium salts. The normal dosage is 5 ml / 100 l of water for a very well-lit tank with >= 1 W / l of illumination and 2.5 ml/100 l of water for a tank that is not as well lit. The supply of carbon dioxide must also be considered. The following table shows recommended fertiliser concentrations according to the general conditions of the aquarium.As actual precise consumption cannot be predicted, we recommend regularly checking the potassium level with the JBL K Test Set, especially prior to each follow-up dose.

CHF 14.50

Customers also bought

JBL Fe Iron Test
Variant: Test set | Variant (2): Test set
JBL Iron Test Fe - Quick test to determine the iron content in freshwater/marine water aquariums & ponds Easy and reliable monitoring of the water values of aquariums/ponds. Helps determine the ideal iron content to check the fertilisation for freshwater and marine water Laboratory comparator system to compensate the inherent water colouring: fill plastic cuvette with sample water, add reagents to another cuvette, place cuvettes in holder, read values on colour chart Duration of use: for setting up a new aquarium: 1 x after setting up, afterwards weekly. In case of green algae problems or when plants don’t grow properly. Testing aquarium water for healthy, clear water 1 quick test, Iron Test Fe. Contents for approx. 50 measurements, incl. reagent, 2 glassvials with screw cap, syringe, comparator block and Fe colour scale. Refill reagent available separately Healthy aquariums with conditions close to natureThe right water values are dependent on the fish stock and the plants inside the aquarium. Even if the water looks clear it can be contaminated. With bad values diseases or algae can appear in the aquarium. To maintain a healthy aquarium with conditions close to nature it is important to check and adapt the water values regularly. For each water analysis JBL provides water tests in the form of quick tests or colour change tests. These determine a certain value or several values in one go. With these water tests you can recognise algae problems and negative nitrate, nitrite, potassium, magnesium values etc. Why test? In addition to a sufficient CO2 supply, iron and trace elements are essential for water plants. Strongly growing aquatic plants permanently need iron and other trace elements, and these are only durable for a limited period during the coupling to so-called chelates, a common feature in modern fertiliser preparations (e.g. JBL Ferropol, JBL Fe +Microelements), so regular monitoring with the JBL Iron Test Fe is needed, along with repeated fertilisation if necessary. Pond owners should check their well water for iron before using it for their pond. Too high iron content can lead to problems in the pond.

Variants from CHF 13.50
CHF 27.90

Micro Special Iron Fertilizer FE 500ml
Aqua Rebell Micro Special Iron High-quality iron fertilizer for aquarium plants Mikro Spezial Eisen is a highly concentrated iron fertilizer that has been specially developed to remedy iron and manganese deficiencies. The nutrients it contains are weakly stabilized and therefore available to plants particularly quickly, enabling deficiency symptoms to be remedied quickly.✅ Advantages at a glance: Contains essential micronutrients such as iron, manganese, copper, zinc, boron and molybdenum Nutrients quickly available to plants thanks to weak chelation Ideal for heavily planted aquariums and aquascapes Safe for shrimps, crayfish and snails 500ml📋 Ingredients (per 10 ml per 100 l of water): Iron (Fe): 1.20 mg/l Manganese (Mn): 0.044 mg/l 💧 Recommendation for use: Mikro Spezial Eisen should be dosed individually, depending on the specific iron requirements of your aquarium. Regular monitoring of iron levels is recommended to ensure an optimal supply.💡 Zoo Roco tip: Mikro Spezial Flowgrow is ideal for the daily supply of micronutrients in heavily planted aquariums. If there are visible signs of deficiency such as pale leaves or poor color development, the targeted use of Mikro Spezial Eisen is recommended. For a comprehensive nutrient supply, Mikro Spezial Flow grow can be combined with macronutrient fertilizers such as Makro Basic NPK.

CHF 18.90

JBL PO4 Phosphate Test sensitive
Variant: Test set | Variant (2): Test set
JBL Phosphate Test sensitive - Quick test to determine the phosphate content in fresh and saltwater aquariums and ponds Easy and reliable monitoring of the water values of aquariums and ponds. Determines the phosphate value to control algae in freshwater and seawater Laboratory comparator system to compensate the inherent water colouring: fill plastic cuvette with sample water, add reagents to another cuvette, place both cuvettes in holder, read values on colour chart when setting up a new freshwater aquarium: once a week. in case of green algae problems Package contents: 1 quick test, Phosphate Test PO4. Contents for approx. 50 measurements. Incl. 2 reagents, 2 glass vials, with screw cap, syringe, dosing spoon, comparator block and colour scale.

Variants from CHF 11.90
CHF 25.90

GioiaJelly
Jelly feeding from Gioia for shrimps and fishDiscover GioiaJelly, the new form of feeding for your shrimps and fish! An exclusive innovation that enriches your feeding for shrimps and fish.Ultra practical: a single drop is enough to feed effectively. Complete nutrition: Rich in proteins, vitamins and essential mineralsSuitable for all: Perfect for fish and shrimp. No water wastage: No more leftovers polluting the water.Available in the following varieties:GioiaJelly Artemia is a natural source of protein that gives your fish and shrimp instant energy. Rich in carotenoids, it intensifies their colors while promoting their growth and vitality.GioiaJelly Spirulina is a natural source of energy, rich in proteins, amino acids and iron. Its mineral and vitamin content strengthens the shrimp's shell and promotes healthy moulting and optimal growth.GioiaJelly Ortie - Nettles are known for their relatively high calcium content, which the shrimps need shrimps need to build up their shells.50ml per bottleCustomers also searched for: shrimp food, shrimp rearing food, breeding food, spirulina,

CHF 7.90

Aqua Rebell Macro Basic Potassium
Plant fertilizer Makro Basic Potassium from Aqua RebellAqua Rebell Makro Basic Potassium - Potassium for healthy and strong plantsAqua Rebell Makro Basic Potassium is a high-quality plant fertilizer that has been specially developed for the targeted supply of potassium (K) to aquarium plants. This essential nutrient plays a central role in plant vitality and ensures stable cell structures, vibrant colors and balanced plant growth.Advantages of Aqua Rebell Makro Basic PotassiumTargeted potassium supply - Ideal for aquariums with soft water or high plant requirements.Promotes cell health - Ensures stable cell walls and improved water absorption.Prevents deficiency symptoms - Prevents symptoms such as holey or glassy leaves.Easy to use - Flexible dosing for different aquarium types and plant densitiesPerfect for aquascaping - Supports beautiful, healthy plants and promotes color intensity.What makes Makro Basic Potassium special?Highly concentrated potassium fertilizer: Aqua Rebell Makro Basic Potassium is specially designed for aquariums in which a potassium deficit needs to be compensated.Improves metabolic processes: Potassium is essential for the transport of nutrients within the plant and thus increases the efficiency of overall nutrient uptake.This fertilizer is particularly important in tanks where potassium is not available in sufficient quantities due to water changes with soft water or other fertilizer systems.Application & dosageAqua Rebell Makro Basic Kalum is easy to dose and ideal for daily use or weekly basic fertilization.Dosage recommendationWith a lot of light (>0.5 watts per liter) with CO2 you need 2ml/day With low light (<0.5 watts per liter) with CO2 you need 1ml/dayWithout CO2 you need 2-4ml/week1 ml Makro Basic Potassium in 50 liters of aquarium water adds 1.00 mg/l potassium (K) to the aquarium water.Who is this fertilizer suitable for?Aqua Rebell Makro Basic Potassium is ideal for aquarists who want to compensate for a potassium deficit in their aquarium, as well as for aquascapers who value a targeted and high-quality nutrient supply.Our opinion:Aqua Rebell Makro Basic Potassium is the perfect choice for targeted potassium fertilization in the aquarium. Stable cell structures, strong growth and bright colors of your plants are guaranteed.Potassium is not available in tap water in sufficient quantities to optimally supply the plants.🔹 Buy Aqua Rebell Makro Basic Potassium now and optimize your aquascape sustainably! 🌱

From CHF 14.90

Suggested products

Dennerle KCL solvent solution
Dennerle KCL solution Ideal care for pH electrodes The Dennerle KCL solution ensures the long-term storage and care of pH electrodes. With its special formula, it guarantees optimal moisture to prevent drying out and measurement errors. This solution extends the service life of your pH probe and ensures precise and reliable measurement results in your aquarium. Product benefits Protection against drying out: Ensures correct storage and prevents pH electrodes from drying out. Longer service life: Extends the service life of your pH probe through regular use. Precise measurement results: Helps maintain the measurement accuracy of the pH probe. Easy to use: Direct application for the long-term functionality of your pH electrode. High quality: For reliable results – Dennerle stands for certified aquarium quality. ApplicationFill the Dennerle KCL solution into the storage solution of your pH electrode to keep it moist during storage and extend its service life. Regular use protects against drying out and ensures precise measurement results.

CHF 8.90

Tip
ARKA pH meter / pH measuring device
Digital pH meterThis high-precision instrument has been specially developed for determining the pH value of water. With its user-friendly operation and fast response time, it is a practical tool for anyone who wants to determine the quality of their water. Whether for the home aquarium, the garden pond, the pool in the garden or for checking osmosis and drinking water - the ARKA myAQUA® pH meter provides reliable measurement results.It is ideal for regular monitoring to ensure the well-being of aquatic life or to guarantee water quality for human consumption. The importance of a balanced pH value cannot be overestimated, as it is one of the key factors in maintaining a healthy water system.The ARKA myAQUA® pH meter makes it easier than ever to keep an eye on this critical parameter. Thanks to its compact size and robust design, it is suitable for both home use and professional applications. The simple handling enables even inexperienced users to take precise measurements and thus actively contribute to the care of their water environment.Measuring range: 0.00 - 14.00 pHMeasuring gradation: 0.01 pHAccuracy: +/- 0.01 pHOperating temperature: 0 - 60 °C

CHF 19.90

ARKA pH/TDS/EC meter
Digital pH/TDS/EC meterThe ARKA myAQUA® pH/TDS/EC meter is an advanced water analysis tool designed for comprehensive and accurate testing of various water quality parameters.It can be used to quickly and accurately measure total dissolved solids (TDS), electrical conductivity (EC), pH and temperature in water and other liquids.Its versatility makes it an indispensable tool for monitoring and maintenance in aquariums, ponds, pools and in the treatment of osmosis and drinking water.Whether it is about the health of aquarium inhabitants, the quality of swimming pool water or the safety of drinking water - the ARKA myAQUA® pH/TDS/EC meter provides reliable data that you can always rely on.Measuring range:pH: 0.00 - 14.00 pH TDS: 0 - 9999 ppm EC: 0 - 9999 µS/cmMeasuring gradation: pH: 0.01 pH TDS: 1 ppm EC: 1 µS/cmAccuracy: pH: +/- 0.05 pH TDS: +/- 2% EC: +/- 2%Temperature: 0 - 60 °C 32 - 140 °FATC: 0 - 60 °C 32 - 140 °F

CHF 49.90

SuperFish Digi Test pH
SuperFish Digi Test pHDigital ph meter for aquariums and pond water. This digital meter measures ph with an accuracy of up to 0.02 units, has an automatic calibration function and makes measuring ph much easier.Accurate pH meter for aquariums and. pond water.Measures pH from 0 to 14 with an accuracy of up to 0.02 units.The device features an automatic calibration function for 1-point (6.86) and 2-point calibration (4.00 - 9.18).Calibration powder is included.Automatic power off after 5 minutes.UseRemove the protective cap before use.Press the power button. Submerge the pH meter up to the Immersion line into the water. The meter is NOT waterproof, never immerse the Never immerse the meter beyond the immersion line. beyond the immersion line into the water.Wait about 30 seconds until the reading is numerically constant.Read the pH of the water.Rinse the electrode with distilled water. rinse, dry with a cloth and put the protective cap.Avoid heat and direct sunlight. 1-point calibration 6.68 The calibration accuracy is ± 0.1 pHDissolve the pH 6.86 buffer powder in a beaker with 250 ml of distilled 25°C warm water.Dip the pH measuring instrument into the water with the pH 6.86 solution and wait about 30 seconds.Press and hold the CAL button for 5 seconds.The display will begin to flash 6.86. When it stops flashing, the pH meter has been calibrated.Rinse the electrode with distilled water. rinse with distilled water, dry with a cloth and put the Put on the protective cap. 2-point calibration 4.00 and 9.18 The calibration accuracy is ± 0.02 pHDissolve the pH 4.00 buffer powder in a beaker with 250 ml of distilled 25°C warm water. Dissolve the buffer powder pH 9.18 in another beaker.Dip the pH meter into the water with the pH 4.00 solution and wait about 30 seconds.Press and hold the CAL button for 5 seconds.The display will begin to flash 6.86.Press the CAL button briefly immediately.The display will flash 4.00. Wait until the flashing stops.Rinse the electrode with distilled water. water.Now immerse the pH meter in the Water with the pH 9.18 solution and wait about 30 seconds.Press and hold the CAL button for 5 seconds.On the display begins to flash 6.86.Press the CAL button immediately briefly.On the display flashes 4.00. Press the CAL button again immediately.On the display now flashes 9.18. If it stops stops flashing, the pH meter is calibrated.The electrode with distilled water Rinse with distilled water, dry with a cloth and put the protective cap on.Care: Keep the electrode clean and dry. Always close the meter with the protective cap. Warranty 1 year manufacturer's warranty. Damage due to improper use (battery leakage, water damage) is not covered. Lift the proof of purchase for proof of warranty. for proof of warranty. The warranty will be voided without proof of purchase! The batteries supplied free of charge have a life of one year. If they are empty at the time of the empty, you must replace them yourself. replace them yourself.

CHF 16.90

SuperFish Digi Test EC-TDS
SuperFish Digi Test EC-TDS3-in-1 TDS meter with plug&play function. High performance and fast test results.SuperFish Digi Test EC-TDS. Accurate 3-in-1 TDS meter for. Aquarium and pond water.Measures 3 different values: conductivity (EC), total dissolved solids (TDS) and. Temperature in Celsius (°C) and Fahrenheit (°F).Calibration is not required.The meter has an automatic Temperature compensation function.Automatic shutdown after 5 minutes. UseRemove the protective cap before use.Press the on/off button.Submerge the EC-TDS meter up to the Immersion line into the water. The meter is NOT waterproof, never submerge it beyond the immersion line into the water.The test results are saved automatically after 5-10 Seconds automatically saved. To achieve a better temperature measurement, press CLEAR and repeat the Test. The test results can also be stored by Pressing HOLD to save.Take the meter out of the water, to read the test results.Press the MODE button to toggle between the test modes (ppm, μS/cm, °C and °F).Pressing the CLEAR button will clear the test results are cleared for a new measurement.Wait 30 seconds before starting a new start a new measurement.Wipe the electrode clean, switch off the turn off the meter and replace the protective protective cap back on.Avoid heat and direct sunlight.Care : Keep the electrodes clean and dry. Always close the meter with the protective cap. Please note!  The color change of the display (green/red) has no meaning..

CHF 13.90

Seneye Home - Freshwater Aquarium
Seneye Home - Freshwater Aquarium - Automatically tests multiple life critical parameters temperature - constantly monitors water temperature, so you can get an alert if your heater breaks free ammonia - monitors the highly toxic free ammonia (NH3) at very low levels, so you can stop your fish from dying from Ammonia posioning pH monitoring - the seneye monitors pH in your aquarium or pond water between 6.4 and 9. This range is ideal for most aquatic life and by monitoring this range increased accuracy has be achieved. Total Light - monitor your light levels over the course of the day and know if if your lights fail. water level - readings are only taken when the seneye device is in water, no false readings.   Easy to install, simply drop in Constantly watching your aquarium, 5600 readings per month Customisable alerts, directly to e-mail and SMS * Upload results and get straightforward advice * USB connection with multiple connection options, including optional USB power adaptor *seneye+ required for some features. system requirements Windows PC with internet connectivity running Windows 7, 8, 10 32/64bit - Not compatible with Belkin Base and virtual USB extenders.Full speed USB 1.0 portMinimum 1Ghz processor and 128mb RAMInternet Browser: Internet Explorer 9.0+, Firefox 4.0+, Safari 4.0+Download of seneye connect application required from seneye.com Ever lost a fish and not know why? Ever experience new tank syndrome and wished there was a way of knowing when the water is safe for your fish? With a seneye Home it’s now possible for even the most inexperienced fish keeper to be successful and become an expert. Automatic monitoring with a seneye Home can save fish from the devastating effects of ammonia poisoning, as well as from harmful swings in pH and temperature. The intelligent software can even alert the you before there is a problem, so you can relax and enjoy without having to worry – all this and it’s so simple to use. As the seneye devices are USB there are multiple connection options available. When connected to the Power Adaptor readings are stored every hour and flashing lights on the device indicate if there is a problem. Readings are stored for 35 days and are automatically uploaded once reconnected to a PC.

CHF 139.90

Tip
JBL ProScan - Water analysis / Smartphone App
Variant: Basic set | Variant (2): Basic set
JBL ProScan - Water analysis via smartphone app JBL ProScan - Water analysis with evaluation via smartphone app With JBL Pro Scan, the current aquarium water values can be determined quickly and easily via smartphone app. All you need to do is install the free JBL app from the Apple AppStore or Google PlayStore on your smartphone. Basic set: Contains 24 analysis strips (GH, KH, pH, nitrite, nitrate, chlorine and CO₂ calculation) with associated JBL ProScan ColorCard. The colour chart serves as a reference when scanning the analysis strip. The result is evaluated and, if necessary, instructions are displayed on how the water values can be optimised. The corresponding app is available free of charge. Refill set: 24 analysis strips for digital evaluation with the JBL ProScan app. Depending on the area of application, the app can be used in "Aquarium fresh water", "Garden pond water" and "Water" mode. If "Aquarium freshwater" and "Water" are selected, the app also automatically calculates the current CO2 content in the water from the values determined for pH and KH. Based on the results of the analysis, the app provides specific recommendations for action and information on how to achieve ideal water values. The "Water" function only provides the pure water values. The recording of the analysis strips and the calibration with the ColorCard should be carried out in bright daylight or artificial light. Direct sunlight should be avoided. The specified sequence of the app should always be followed during the measurement to ensure correct results. The app can be used in German and French. Instructions for use:After starting the app for the first time, a one-off calibration using the JBL ProScan ColourCard is required. This calibration can be carried out quickly and easily by anyone. Afterwards, the water values can be analysed and evaluated immediately in conjunction with the JBL ProScan analysis strips. Immerse the analysis strip in water for 1 second, shake it off and then place it on the reference colour card (JBL ProScan ColorCard). Select the water type with the free ProScan app (in the Apple store & Google PlayStore), scan the colour card like a QR code and wait briefly for the result (waiting time is carried out by the app). The result is displayed directly in mg/l, ° hardness and the pH value. The values are evaluated by the app (good - medium - bad) and recommendations for optimisation are displayed. The type of ambient light is automatically evaluated and taken into account for colour calibration. The JBL ProScan analysis strips have been specially adapted for evaluation with the colour chart. No accuracy can be guaranteed with other test strips.

Variants from CHF 27.50
CHF 29.90

Tetra Test Nitrate NO3 10ml
Tetra Test Nitrat - NO3 Measures the nitrate value reliably and precisely Suitable for all freshwater and marine aquarium for a large number of analyses excellent long-term stability Packaging Units1x19 ml + 2x10 ml  

CHF 23.50

JBL O2 Oxygen Test
Variant: Test set | Variant (2): Test set
JBL Oxygen Test O2 - Quick test to determine the oxygen content in fresh and saltwater aquariums and ponds. Easy and reliable monitoring of the water values of aquariums and ponds. Determines the ideal oxygen content in freshwater and seawater Quick test for monitoring the aeration: fill glass vial with sample water, add reagents, read sample value off colour chart When to use: once a week in newly set up aquariums 1 quick test, Oxygen Test O2. Contents for approx. 50 measurements. Incl. 2 reagents, glass vial with screw cap and colour chart. Refill reagents available separately Healthy aquarium/healthy pond with conditions close to natureThe right water values are dependent on the fish stock and the plants in the aquarium/pond. Even if the water looks clear it can be contaminated. With bad values diseases or algae can appear in the aquarium/pond. To maintain a healthy aquarium/pond with conditions close to nature it is important to check and adapt the water values regularly. For each water analysis JBL provides water tests in the form of quick tests or colour change tests. These determine a certain value or several values in one go. With these water tests you can recognise algae problems and negative nitrate, nitrite, potassium, magnesium values etc. Why test?The well-being of aquarium and pond dwellers and the growth of aquatic plants depend to a large extent on the O2 level being kept as constant as possible. Oxygen is the “elixir of life” for all animal organisms. All animals in the aquarium and pond need oxygen to breathe. But the “invisible helpers” in the aquarium and pond, the bacteria that break down pollutants, also depend on sufficient supplies of oxygen in order to be able to carry out their useful activities. In aquariums and ponds with little or no planting and in marine aquariums the oxygen content always needs to be kept at an adequate balance using technical equipment. The water absorbs oxygen through the water surface. The more the surface is moving the more oxygen is absorbed. In case of dying algae and during the use of many medications the oxygen content in the water needs to be increased.

Variants from CHF 12.90
CHF 24.90

JBL water test potassium
Variant: Test set | Variant (2): Test set
JBL K Potassium Test Set - Quick test to determine the potassium content in freshwater Simple and reliable control of water values. Checks the freshwater aquarium fertilisation by determining the ideal potassium value Quick test: fill cuvette with sample water, add reagents, fill turbid sample water into special glass vial until underlying cross is no longer visible, read filled in quantity. This value is equivalent to the potassium content in mg/l Use with diatom problems Healthy aquariums with conditions close to natureThe right water values are dependent on the fish stock and the plants in the aquarium. Even if the water looks clear it can be contaminated. With bad values diseases or algae can appear in the aquarium. To maintain a healthy aquarium with conditions close to nature it is important to check and adapt the water values regularly. For each water analysis JBL provides water tests in the form of quick tests or colour change tests. These determine a certain value or several values in one go. With these water tests you can recognise algae problems and negative nitrate, nitrite, potassium, magnesium values etc. Why test?Potassium is one of the macroelements which plants in freshwater absorb quickly and effectively within a few hours and can also store for a limited time. Growing plants require more potassium than other elements. As a result, potassium concentrations can drop to a minimum range, causing plant growth to stagnate, even if the aquarium water is fertilised regularly. Potassium levels in mains water are usually too low compared to those in natural biotopes, particularly with relation to calcium and magnesium concentrations.

Variants from CHF 27.50
CHF 34.90

Tetra Iron Test
Tetra Test Fe Measures the iron value reliably and accurately for all freshwater aquariums High range Good long-term stability

CHF 32.50

Water test HI98127 pH/°C tester (0.1 pH resolution)
Water test HI98127 pH/°C tester (0.1 pH resolution) HI 98127 simultaneously measures pH with 0.1 resolution and temperature. It is easy to use, fast and accurate, making it ideal for routine measurements. With replaceable electrode. Dual display of pH & temperature Resolution of 0.1 pH Easily replaceable electrode Automatic calibration and temperature compensation  Stability indicator for reliable values HOLD function to hold a measured value in the display Battery charge indicator and automatic switch-off Contents: Tester including pH electrode, electrode replacement tool and batteries. Specifications: Measuring range pH -2.0 to 16.0 pH Temperature measuring range -5.0 to 60.0°C Resolution pH 0.1 pH Temperature resolution 0.1°C Accuracy pH ±0.5 pH Temperature accuracy ±0.5°C Calibration Automatic, 2-point, with 2 stored buffer seriesTemperature compensation Automatic Electrode HI 73127 (incl.) Batteries 4 x 1.5V / approx. 300 operating hours / automatic switch-offDimensions 163 x 40 x 26 mm Weight 100 g

CHF 129.00

Customers also saw

JBL water test potassium
Variant: Test set | Variant (2): Test set
JBL K Potassium Test Set - Quick test to determine the potassium content in freshwater Simple and reliable control of water values. Checks the freshwater aquarium fertilisation by determining the ideal potassium value Quick test: fill cuvette with sample water, add reagents, fill turbid sample water into special glass vial until underlying cross is no longer visible, read filled in quantity. This value is equivalent to the potassium content in mg/l Use with diatom problems Healthy aquariums with conditions close to natureThe right water values are dependent on the fish stock and the plants in the aquarium. Even if the water looks clear it can be contaminated. With bad values diseases or algae can appear in the aquarium. To maintain a healthy aquarium with conditions close to nature it is important to check and adapt the water values regularly. For each water analysis JBL provides water tests in the form of quick tests or colour change tests. These determine a certain value or several values in one go. With these water tests you can recognise algae problems and negative nitrate, nitrite, potassium, magnesium values etc. Why test?Potassium is one of the macroelements which plants in freshwater absorb quickly and effectively within a few hours and can also store for a limited time. Growing plants require more potassium than other elements. As a result, potassium concentrations can drop to a minimum range, causing plant growth to stagnate, even if the aquarium water is fertilised regularly. Potassium levels in mains water are usually too low compared to those in natural biotopes, particularly with relation to calcium and magnesium concentrations.

Variants from CHF 27.50
CHF 34.90