Bucephalandra sp. 'Wave leaf'

Article no: ZJ-2450

CHF 16.90

Stock: 1

Available, delivery time: 1-3 days

Delivery between Tuesday, 13 October and Wednesday, 14 October
Zahlungsarten
Product information "Bucephalandra sp. 'Wave leaf'"

Bucephalandra sp. "Wave leaf"


Bucephalandra sp. "Wave Leaf" is an aquarium plant that can grow on rocks and roots. An endemic species from the Indonesian island of Borneo. The rhizome of the plant should not be buried in the soil.
  • Difficulty of growing: easy
  • Light requirements: low
  • CO₂ requirements: low
  • Height of mature plant: 10 cm
  • Growth: slow
  • Temperature: 22-28°C
  • Placement in aquarium: second level
  • Origin: Borneo Island, Southeast Asia
  • Cup diameter: 6 cm
Although the Bucephalalander has been known to botanists since the mid-19th century. Century is known, it enjoys in the aquaristics only for about a decade of growing popularity. The genus name refers to the name of Alexander the Great's beloved horse, Bucephalus. Bucephalandra sp. Wavyleaf was found in the wild in the riparian rivers of Borneo. Its characteristic feature is the relatively narrow and long leaves of deep green color with wavy edges.
In terms of overall structure and requirements, it resembles the popular Anubias. Aquascapers like to use this plant in arrangement design because it requires little maintenance due to its moderate growth. Bucephalandra can be successfully cultivated in paludariums, but the leaves above water are thicker and differently colored.
Bucephalandra sp. 'Wave Leaf' overgrows rushing streams and rivers with strong currents in the wild. It is also commonly found on the slopes of waterfalls. In the aquarium, it can therefore be successfully planted near the filter outlet or the circulating pump.
This variety of Bucephalandra is easy to grow and therefore recommended for beginners. It has a wide range of tolerable parameters. It grows in both soft and hard water, with a GH of 0 - 30. pH should be between 5 and 8. It can thrive in partial shade and even in shade, although it looks more colorful in intense lighting.
The propagation is similar to that of Anubias. It forms derived rhizomes that emerge from the main part of the plant. To obtain new cuttings, simply cut off the side shoots. If it stays on the mother plant, it forms a nice, compact growth. In the background, attached to a root or rock, it cuts a fine figure. Its adhesive roots grow very strongly into the pores of rocks or roots. After some time, the grip is so strong that it is practically impossible to remove the plant without scissors or a knife. Bucephalandra can also be planted in loose and porous substrate, such as lava, but be sure to avoid covering the rhizome. Planted deep in the substrate, it loses its leaves and dies. In addition to aquariums, this species is also well suited for paludariums, but the humidity must always be kept high. Otherwise, the leaves of Bucephalandra will dry out and die.
Planting: The plant must be removed from the cup and thoroughly rinsed from the gel under running water. This is best done by placing the plant in a container of lukewarm water. Most of the gel will then fall off by itself. Divide the contents of the cup into 1-2 cm lumps and then place them at a small distance on the selected items
.
Composition
Feeding recommendation
Technical details
Size information

0 of 0 reviews

Give us a rating!

Share your experience with the product with other customers.


Customers also bought

Bucephalandra sp. Needle leaf
🌿 Bucephalandra sp. 'Needle Leaf' InVitro Delicate epiphyte plant from Aqua Art The Bucephalandra sp. 'Needle Leaf' from Aqua Art is a particularly elegant variant of the popular Borneo epiphytes. It is characterized by very narrow, needle-like leaves, which give it a delicate yet exotic appearance - ideal for nano aquariums, detailed areas in aquascaping or as a fine structural plant on roots and stones. Thanks to in vitro cultivation, you get a sterile, snail- and pesticide-free plant that is ideal for shrimp tanks and sensitive aquariums. Bucephalandra grows slowly, requires little light and no CO₂ - but is nevertheless color-stable and particularly decorative with stable water values.🌱 Advantages at a glance: ✅ Very narrow leaf shape - fine, needle-like structure ✅ InVitro - 100% free from snails, algae & pesticides ✅ Safe for shrimps & sensitive aquariums ✅ Perennial plant - ideal for roots, stones & decoration ✅ Easy to care for, slow-growing & permanently decorative📋 Product details: Name: Bucephalandra sp. 'Needle Leaf' Type: Perennial plant Position in the aquarium: Foreground to midground, on hardscape Growth height: approx. 3-6 cm Light requirement: Low to medium CO₂ supply: Not necessary, but beneficial Growth: Slow Delivery form: In vitro cup (grown sterile) Manufacturer: Aqua Art💡 Zoo Roco Tip: It is best to glue or tie Bucephalandra sp. 'Needle Leaf' to dark roots or lava rocks. This will accentuate the fine leaves particularly well - and the plant can establish itself optimally without being buried.

CHF 16.90

Bucephalandra sp. "Aqua Artica
Bucephalandra sp. "Aqua Artica Bucephalandra sp. "Aqua Artica" is an aquarium plant that likes to grow on rocks and roots. It is an endemic species from Borneo.Difficulty of cultivation: easyLight requirements: lowCO₂ requirements: lowHeight of adult plant: 10 cmGrowth: very slowTemperature: 20-27°CPlacement in aquarium: Second levelOrigin: Borneo Island, Southeast AsiaCup diameter: 6 cmThe genus name is derived from the Greek term 'bull's head' and refers directly to the dust sacs in the horn-like inflorescences. Bucephalandra sp. Aqua Artica is a beautiful and rather rare species native to Southeast Asia. It is an endemic plant from Borneo that is not often found in aquariums and can be considered a rarity.Bucephalandra sp. Aqua Artica belongs to the Araceae family, the picture plant family. The family counts up to 2,500 species, among which there are some epiphytes like Bucephalandra sp. Aqua Artica. In the wild, it grows on rocks, in streams and rivers with rushing currents, or on the walls of waterfalls.It prefers partial shade or even full shade. Its natural habitat is humid tropical forests where there is very little light. Borneo is in an equatorial climate zone, which means that there are dry and rainy seasons. As the rains come, the levels of the rivers rise, causing Bucephalandra to flood for months at a time. For this reason, the plant has taken on submersible characteristics and does well under water. When fully submerged, it is more intensely colored and has a finer leaf structure.Bucephalandra sp. Aqua Artica has creeping stems with the tip pointing vertically upward. The characteristic elongated green leaves with a prominent central vein are its special ornament.It grows slowly and does not exceed 10 cm in height. It is a low-maintenance species that needs no pruning and no intense lighting. It tolerates temperatures from 20 to 27 °C. However, it should be noted that it may lose its leaves in case of sudden changes in water or light parameters. Even if the plant loses its leaves but has a healthy rhizome, there is a good chance that it will recover and grow well again. Bucephalandra grows well in soft, slightly acidic water. The supply of carbon dioxide and fertilizers will favor the growth of the plant.It is not difficult to grow and can be recommended to beginners in aquaristics. It looks great in the background, attached to a root or rock. In any case, the roots of Bucephalandra should not be covered with substrate. Outside the aquarium, this species is also well suited for paludariums, where, however, it has less color and stiffer leaves.Planting: The plant must be removed from the cup and thoroughly rinsed from the gel under running water. This is best done by placing the plant in a container of lukewarm water. Most of the gel will then fall off by itself. Divide the contents of the cup into 1-2 cm lumps and then place them at a small distance on the selected items.

CHF 16.90

Staurogyne Repens (Creeping Staurogyne)
Staurogyne RepensStaurogyne Repens is a light green plant that is straightforward to grow. Suitable for the foreground or background, it can be grown into a lawn shape in larger tanks to create a wonderful base in the aquarium.Growth: easyLight requirements: mediumCO₂ requirements: lowAdult plant height: up to 10 cmGrowth: ModerateTemperature: 20-28°CPlacement in aquarium: Foreground or backgroundOrigin: South AmericaShell diameter 6 cm The Staurogyne Repens requires a Medium light and CO₂ requirements. Cut shoots can be planted in the Substrate to be planted and continue to multiply. The Staurogyne Repens has an interesting leaf structure and color. It is characterized by moderate growth and adult specimens reach a height of up to 10 cm. It is popular for arrangements in planted aquariums. It has a well-developed root system. It originates from South America, more precisely from the southern Amazon. In the wild it was discovered in the Rio Cristalino river. The plant is characterized by low light requirements. In good light, it does not grow too tall and forms a dense lawn. Less light is not a problem for it, but then it grows more slowly. The dosage of carbon dioxide and feeding with micro and macronutrient fertilizers ensure intensive growth. Staurogyne Repens absorbs nutrients mainly through its root system and therefore prefers a fertile substrate. Advanced aquarists, however, can keep this species attached to ornaments or decorations. It is enough to use a suitable adhesive. In this case, care must be taken to provide fertilizers to the water column. The best growth results are obtained when the plant is planted in an active substrate. Under good conditions, the plant grows very quickly. It does not require complicated care. All you need to pay attention to is regular pruning using sharp scissors with curved blades. Frequent pruning will help Staurogyne Repens become denser and grow. After pruning, it spreads and forms new stems with leaves. Therefore, it can also be used to create an interesting foreground. Planting: The plant must be removed from the cup and thoroughly rinsed from the gel under running water. This is best done by placing the plant in a container of lukewarm water. Most of the gel will then fall off by itself. Divide the contents of the cup into 1-2 cm lumps and then place them at intervals between 3 - 4 cm..

CHF 6.50

BioArt Scaping Set Tweezers and scissors
Scaping set from BioArt - scissors and tweezersBioArt Scaping Set - precision & control for aquascapingThe BioArt Scaping Set is the ideal tool set for aquascaping enthusiasts who value precise plant care and a perfect underwater landscape. This innovative 2-in-1 plant tool set has been specially developed for the care and design of compact BioArt bottle gardens.Perfect tools for your aquariumCurved tweezers - Ideal for precise plant placement and careCurved scissors - Perfect for fine pruning work and plant trimming45° bend - Facilitates handling in hard-to-reach areasErgonomic design - Comfortable to use for precise shapingMaximum control for the aquascapeThe curved tweezers make it easy to insert and fix plants, while the curved scissors ensure precise pruning - a must for any well-maintained aquascape. The high-quality workmanship ensures a long service life and precise work results.The BioArt Scaping Set is an indispensable accessory for anyone who wants to maintain and design their aquarium professionally. It makes it easier to work in small spaces and enables aesthetic and healthy plant development.Customers also searched for: BioArt Scaping Set, aquascaping tools, aquarium plant care, aquarium scissors, aquarium tweezers, aquarium curved scissors, aquascaping accessories, aquarium plant care

CHF 24.90

Bucephalandra sp. Ulysses
🌿 Bucephalandra sp. 'Ulysses' InVitro Noble perennial plant with character Bucephalandra sp. 'Ulysses' from Aqua Art is an exclusive, slow-growing aquarium plant that impresses with its dark green to bluish shimmering leaves with slightly wavy edges. This variant is ideal for attaching to roots, stones or decorative elements - without planting in the substrate. Thanks to in vitro cultivation, it is free from snails, algae and pesticides - ideal for shrimp tanks, nano aquariums and natural aquariums. The plant is robust, easy to care for and decorative - even in low light and without a CO₂ supply.✅ Advantages at a glance: Staking plant with wavy, dark green leaves InVitro - sterile, pesticide-free and snail-free Slow-growing, very easy to care for Perfect for shrimp tanks, aquascapes and small aquariums No substrate required - ideal for roots or stones Eye-catching leaf structure with an elegant shimmer📋 Product details: Name: Bucephalandra sp. 'Ulysses' Type: Perennial plant Placement: Foreground to midground Growth height: approx. 5-10 cm Light requirement: low to medium CO₂ supply: not essential, but beneficial Growth: slow Delivery form: In vitro cup (sterile cultivated) Manufacturer: Aqua Art💡 Zoo Roco tip: Place Bucephalandra 'Ulysses' on dark hardscape such as lava rock or bogwood - this will show off the shimmering leaves particularly well. Plant glue or a fine nylon thread is suitable for attaching them.With its unique color effect, low requirements and high decorative quality, Bucephalandra 'Ulysses' is the perfect plant for modern aquarium layouts.

CHF 16.50

Me Syphon-Vac Gravel Cleaner
Me Syphon-Vac Gravel Cleaner – Substrate Cleaner & Water Vacuum for AquariumsThe Me Syphon-Vac Gravel Cleaner is a practical substrate cleaner for thorough and hassle-free aquarium maintenance. It removes reliably silt, dirt and deposits from the gravel whilst at the same time supporting a clean and controlled water change.Thanks to its simple and quick handling, the mulm vacuum is ideal for regular aquarium cleaning. The integrated suction aid allows a comfortable start of the water flow, while the shut-off valve offers better control when cleaning and emptying. This allows dirt to be vacuumed up in a targeted manner without unnecessarily increasing the maintenance effortThe Me Syphon-Vac Gravel Cleaner is the ideal choice for aquarists who value a clean substrate, clear water and efficient care of their aquarium.Product benefits at a glance:Reliably removes silt and dirt from the substrate Ideal for regular water changesSimple and quick to useWith practical suction aidIncludes shut-off valve to control the water flowPerfectly suited for regular aquarium maintenanceTechnical details:Dimensions: 4300 mm x 2400 mm x 700 mm

CHF 11.90

Suggested products

New
Ammania gracilis – red stem plant
Ammania gracilis – red stem plant for aquascapingAmmania gracilis – a decorative red stem plant for the midground and background. Ideal for aquascaping, with beautiful colouration when provided with light, CO₂ and a good supply of nutrients.Ammania gracilis is an attractive stem plant for freshwater aquariums and is particularly popular in aquascaping. The plant produces elongated, slightly wavy leaves which, depending on light and nutrient levels, can range in colour from greenish to coppery to a rich reddish hue. This allows it to add beautiful splashes of colour to the aquarium and makes it ideal as an eye-catching feature in the midground or background.Under good conditions, Ammania gracilis grows upright and can reach a height of around 20 to 50 cm. To develop an intense red colour, the plant requires medium to strong lighting, a good supply of nutrients and, ideally, CO₂ supplementation. It develops its full colour particularly well under strong light and with sufficient micronutrients.Ammania gracilis is suitable for planted aquariums, aquascapes and ‘ Holland ’ aquariums. Regular trimming keeps the plant compact and encourages bushier branching. The cut shoot tips can be replanted directly into the substrate.Your benefits at a glanceAttractive red stem plant for aquariumsIdeal for the midground and backgroundAdds lovely splashes of colour to the aquascapeGrowth height approx. 20–50 cmParticularly beautiful colouration under good lightingBenefits from CO₂ injection and nutrient fertilisationEasy to propagate by pruningHeight: approx. 20–50 cmInstructions for useBefore planting, carefully remove the pot, rockwool or transport material from the roots. If necessary, divide the plant into smaller sections and plant the individual stems in the substrate, leaving a little space between them. This ensures the shoots receive enough light and can develop well.Ammania gracilis prefers a bright spot in the aquarium. Moderate to strong lighting, as well as a regular supply of macro- and micronutrients, promote healthy growth and vibrant colouration. Adding CO₂ is recommended, as the plant grows significantly more vigorously and with more intense colour when supplied with sufficient CO₂.Regular pruning encourages bushier growth. The cut shoot tips can be replanted as cuttings.Zoo Roco TipTo develop a beautiful red to copper-coloured hue, Ammania gracilis requires plenty of light and a steady supply of nutrients. Do not plant the stems too densely, so that the lower leaves also receive sufficient light. When combined with light-green plants, this creates a particularly beautiful colour contrast in the aquarium.

CHF 6.50

Ludwigia ovalis Invitro aquarium plant
Ludwigia ovalis invitro cup This plant, with a characteristic oval leaf oval leaf shape in orange-pink color, is easy to grow and an interesting addition to the aquarium. interesting addition to the aquarium. The leaves are slightly smaller than those of the popular Repens variety. Due to their rapid growth the clumps must be trimmed and thinned out regularly to prevent excessive growth. prevent excessive growth. The original shape of the leaf blade makes it an attractive addition to the plant composition in the aquarium. aquarium.To use this plant, remove it from the cup and rinse the gel. cup and rinse the gel thoroughly under running water. Then divide it into small clumps of 1-2 cm and plant them at short intervals. them at short intervals. As it grows, it will form a form a uniform group of adult plants.This plant comes from in vitro cultivation and is free from snails, parasites and algae. and algae. High-quality gel was used as a medium, so it will establish itself quickly establish itself in the aquarium. Light requirement: medium to intensive Optimum temperature: 10 to 28 °C Water values: soft to hard pH value: 4 to 7 CO2 and nutrients: recommended Propagation: cuttings

CHF 16.90

Ludwigia ovalis Invitro aquarium plant
Ludwigia ovalis invitro cup This plant, with a characteristic oval leaf oval leaf shape in orange-pink color, is easy to grow and an interesting addition to the aquarium. interesting addition to the aquarium. The leaves are slightly smaller than those of the popular Repens variety. Due to their rapid growth the clumps must be trimmed and thinned out regularly to prevent excessive growth. prevent excessive growth. The original shape of the leaf blade makes it an attractive addition to the plant composition in the aquarium. aquarium.To use this plant, remove it from the cup and rinse the gel. cup and rinse the gel thoroughly under running water. Then divide it into small clumps of 1-2 cm and plant them at short intervals. them at short intervals. As it grows, it will form a form a uniform group of adult plants.This plant comes from in vitro cultivation and is free from snails, parasites and algae. and algae. High-quality gel was used as a medium, so it will establish itself quickly establish itself in the aquarium. Light requirement: medium to intensive Optimum temperature: 10 to 28 °C Water values: soft to hard pH value: 4 to 7 CO2 and nutrients: recommended Propagation: cuttings

CHF 6.50

Sagittaria subulata
Saggitaria subulata - InVitro Sagittaria subulata is a versatile and easy-care aquarium plant that creates a harmonious overall picture both in the foreground and in the middle ground. With its narrow, grass-like leaves, it forms dense, natural carpets and brings lively structure to any aquarium. Under optimal conditions, the plant spreads via runners and quickly creates a dense growth. Depending on the placement and light conditions, it can vary its growth height - from low ground cover to taller, decorative accents in the background. The occasional flowering is particularly attractive in optimal conditions: Delicate, small flowers can appear above the surface of the water, adding an unusual touch to the aquarium. Advantages at a glance: Undemanding aquatic plant for beginners and professionals Forms dense lawns through natural runners Flexible growth height depending on location and care Can develop decorative flowers above the water surface Supplied free from snails, algae and parasites Product details: Name: Sagittaria subulataPlanting location: Foreground - middle groundOrigin: South America Growth: FastHeight: Up to 30 cm, depending on conditionsLight requirement: Medium to high CO₂ supply: not essential, but beneficial Propagation: by stolons, divisionDelivery form: InVitro (sterile packaging) Manufacturer: Aqua art

CHF 6.50

Cryptocoryne wendtii Mi Oya
Cryptocoryne wendtii 'Mi Oya' In Vitro Cryptocoryne wendtii 'Mi Oya' is an attractive and uncomplicated aquarium plant that brings natural elegance to the aquarium with its broad, gently wavy leaves in warm brown tones. Its special coloring creates exciting contrasts with green plants and adds depth to the layout. Thanks to its robust characteristics, it is ideal for beginners and experienced aquascapers alike. The plant grows evenly and forms dense groups that create a harmonious structure, especially in the middle or background. Thanks to its adaptability, it also copes well with moderate lighting and low CO₂ addition and remains permanently decorative. Advantages at a glance:Easy to care for and ideal for beginners Warm brown and olive tones for natural contrasts Compact, group-forming growth Suitable for center and background design Grown in vitro - free from snails and algae Product details: Name: Cryptocoryne wendtii 'Mi Oya' Type: Medium - background plant Growth height: approx. 15-30+cm Light requirement: low to medium CO₂ supply: not essential, but beneficialpH value: 5 to 8 Growth: slow to medium (~2-3 leaves/month) Propagation: by stolons, division Delivery form: In vitro cup (sterile cultivation) Manufacturer: Aqua Art

CHF 8.90

Ludwigia ovalis Invitro aquarium plant
Ludwigia ovalis invitro cup This plant, with a characteristic oval leaf oval leaf shape in orange-pink color, is easy to grow and an interesting addition to the aquarium. interesting addition to the aquarium. The leaves are slightly smaller than those of the popular Repens variety. Due to their rapid growth the clumps must be trimmed and thinned out regularly to prevent excessive growth. prevent excessive growth. The original shape of the leaf blade makes it an attractive addition to the plant composition in the aquarium. aquarium.To use this plant, remove it from the cup and rinse the gel. cup and rinse the gel thoroughly under running water. Then divide it into small clumps of 1-2 cm and plant them at short intervals. them at short intervals. As it grows, it will form a form a uniform group of adult plants.This plant comes from in vitro cultivation and is free from snails, parasites and algae. and algae. High-quality gel was used as a medium, so it will establish itself quickly establish itself in the aquarium. Light requirement: medium to intensive Optimum temperature: 10 to 28 °C Water values: soft to hard pH value: 4 to 7 CO2 and nutrients: recommended Propagation: cuttings

CHF 6.50

Proserpinaca palustris
🌿 Proserpinaca palustris - Decorative aquarium plant with serrated foliage Structure and color for the middle to background layout Proserpinaca palustris from Aqua Art is an unusual aquarium plant with finely toothed, fern-like leaves that can take on a fascinating copper-orange coloration in good light. It grows upright and gives the aquascape a special depth effect and structure thanks to its unique texture. In well-lit tanks with a CO₂ supply, it develops vibrant colors and healthy growth. Its eye-catching appearance makes it ideal as an accent plant in the middle or background. ✅ Advantages at a glance Unique leaf shape with serrated foliage Color gradient from green to copper-orange in strong light Ideal for structured middle and background design Demanding, but very decorative under optimal conditions Grown in vitro - free from snails and pesticides Particularly striking in layouts with contrasting plants 📋 Product details Name: Proserpinaca palustris Origin: North and South America Type: Stem plant Growth height: approx. 20-40 cm Light requirement: medium to high CO₂ supply: recommended to necessary Growth: medium Propagation: Cuttings after pruning Delivery form: In vitro cup (sterile) Manufacturer: Aqua Art 💡 Zoo Roco tip Proserpinaca palustris looks particularly impressive when planted in groups and combined with fine-leaved plants such as Myriophyllum or Rotala. Strong light and regular micronutrient fertilization are crucial for intensive colouring. With Proserpinaca palustris from Aqua Art, you can add variety, color and structure to your aquascape - ideal for sophisticated layouts with character.Customers also searched for: Proserpinaca palustris, Aqua Art, structure-rich aquarium plant, stem plant aquarium, serrated leaves, InVitro plant aquarium, aquascaping plant, buy Proserpinaca, reddish aquarium plant, background plant aquarium

CHF 6.50

Hygrophila sp. Araguaia
🌿 Hygrophila sp. 'Araguaia' InVitro Reddish-brown accent plant with unique growth habit Hygrophila sp. 'Araguaia' from Aqua Art is a particularly attractive, compact stem plant with a reddish-bronze color and finely branched growth. It is ideal for the foreground to midground and provides structured contrasts and warm color accents in aquascapes. This plant is one of the slow-growing Hygrophila species and can be easily shaped and thickened by regular pruning. Supplied as an in-vitro plant, it is free from algae, snails and pesticides - ideal for shrimp tanks and sensitive aquariums.✅ Advantages at a glance: Compact Hygrophila with reddish-bronze leaves InVitro - sterile, snail-free & pesticide-free Ideal for the foreground or middle ground Slow-growing - easy to shape and grow bushy Good effect with strong lighting & CO₂ supply Very decorative in natural aquariums and layouts with contrasting colors📋 Product details: Name: Hygrophila sp. 'Araguaia' Type: Stem plant Placement: Foreground to midground Growth height: approx. 5-15 cm Light requirement: medium to high CO₂ supply: recommended Growth: slow Delivery form: In vitro cup (sterile cultivated) Manufacturer: Aqua Art💡 Zoo Roco tip: Combine Hygrophila 'Araguaia' with light green plants such as Micranthemum or Hydrocotyle sp. 'Japan' - to show off the darker coloring particularly well. For a dense carpet, regular pruning is recommended.Hygrophila 'Araguaia' provides subtle color accents and fine structure in the lower section of the aquarium - ideal for sophisticated layouts and harmonious plant design.

CHF 6.50

Ludwigia sphaerocarpa Pilosa
Ludwigia sphaerocarpa 'Pilosa' InVitro Red accent plant for aquascaping Ludwigia sphaerocarpa 'Pilosa' is a decorative and rare stem plant with a particularly intense red coloration and fine leaf structure - a real eye-catcher for any natural aquarium. This variety is ideal for the mid to background area and adds color depth and contrast to groups of green plants. As an Aqua Art in vitro plant, it is free from snails, algae and pesticides, making it perfect for shrimp tanks and sensitive aquariums. With good lighting and CO₂ supply, it develops its full color intensity and grows vigorously but controllably.✅ Advantages at a glance: Intensely red-colored stem plant with a fine texture Grown in vitro - sterile, free from harmful substances Ideal for color contrasts in the middle or background Safe for shrimps and sensitive aquariums Grows compact & controllable with good care📋 Product details: Name: Ludwigia sphaerocarpa 'Pilosa' Type: Stem plant Placement: Middle to background Growth height: approx. 20-40 cm Light requirement: medium to high CO₂ supply: recommended Color effect: red to reddish-green Growth: medium Delivery form: In vitro cup (sterile cultivation) Manufacturer: Aqua Art💡 Zoo Roco tip: For strong red coloration, the plant should be kept under intensive lighting and regularly supplied with iron and micronutrients. A good supply of CO₂ also has a positive effect on growth and color.Ludwigia sphaerocarpa 'Pilosa' from Aqua Art brings structure, contrast and an intense play of colors to the aquarium - perfect for modern aquascaping layouts.

CHF 6.50

Bucephalandra sp. Ulysses
🌿 Bucephalandra sp. 'Ulysses' InVitro Noble perennial plant with character Bucephalandra sp. 'Ulysses' from Aqua Art is an exclusive, slow-growing aquarium plant that impresses with its dark green to bluish shimmering leaves with slightly wavy edges. This variant is ideal for attaching to roots, stones or decorative elements - without planting in the substrate. Thanks to in vitro cultivation, it is free from snails, algae and pesticides - ideal for shrimp tanks, nano aquariums and natural aquariums. The plant is robust, easy to care for and decorative - even in low light and without a CO₂ supply.✅ Advantages at a glance: Staking plant with wavy, dark green leaves InVitro - sterile, pesticide-free and snail-free Slow-growing, very easy to care for Perfect for shrimp tanks, aquascapes and small aquariums No substrate required - ideal for roots or stones Eye-catching leaf structure with an elegant shimmer📋 Product details: Name: Bucephalandra sp. 'Ulysses' Type: Perennial plant Placement: Foreground to midground Growth height: approx. 5-10 cm Light requirement: low to medium CO₂ supply: not essential, but beneficial Growth: slow Delivery form: In vitro cup (sterile cultivated) Manufacturer: Aqua Art💡 Zoo Roco tip: Place Bucephalandra 'Ulysses' on dark hardscape such as lava rock or bogwood - this will show off the shimmering leaves particularly well. Plant glue or a fine nylon thread is suitable for attaching them.With its unique color effect, low requirements and high decorative quality, Bucephalandra 'Ulysses' is the perfect plant for modern aquarium layouts.

CHF 16.50

Rotala rotundifolia Invitro
Invitro aquarium plant Rotala rotundifoliaColorful stem plant for the background Rotala rotundifolia is one of the most popular stem plants in the aquarium hobby - versatile, easy to care for and particularly attractive thanks to its delicate, round leaves. Depending on the light intensity and nutrient supply, it develops a vibrant green to bright red, adding lively color accents to any aquarium layout. The in vitro version is grown under sterile conditions and is therefore free from algae, snails and pesticides - ideal for sensitive aquariums, especially shrimp tanks. Fast-growing and adaptable, Rotala rotundifolia is ideal for the mid to background and harmonizes wonderfully with other fine stem plants in the natural aquarium. Advantages at a glance: ✅ Changes color depending on the light - from green to red ✅ Fast-growing & ideal for dense groups of plants ✅ InVitro - guaranteed free from harmful substances & snails ✅ Safe for shrimps & sensitive tanks ✅ Perfect for aquascaping & classic plant aquariumsProduct details: Name: Rotala rotundifolia Type: Stem plant Position in aquarium: Middle to background Growth height: approx. 30-50 cm Light requirement: Medium to high CO₂ supply: Recommended for more intense colorationTemperature: 22 - 28°C Delivery form: In vitro cup (grown sterile) Color effect: Green to reddish, depending on light & nutrients

CHF 6.50

Hydrocotyle sp. Japan
🌿 Hydrocotyle sp. 'Japan' InVitroPlayful ground cover with a unique leaf shape Hydrocotyle sp. 'Japan' from Aqua Art is an unusual, fast-growing aquarium plant with characteristic small, round leaves on thin shoots. It is ideal for the foreground or middle ground and can grow both creeping and ascending, depending on how it is cared for. InVitro cultivation guarantees a snail and pesticide-free plant, perfect for shrimp tanks, nano aquariums and detailed aquascapes. Its unusual appearance brings playful lightness and fresh greenery to any underwater landscape.✅ Advantages at a glance: Characteristic rounded leaves on fine tendrils InVitro - sterile, shrimp-safe & pesticide-free Ideal for the foreground or middle area Flexible growth - creeping, hanging or ascending Easy to care for & fast-growing Perfect for creative aquascapes and nano tanks📋 Product details: Name: Hydrocotyle sp. 'Japan' Type: Ground cover / foreground plant Growth height: 3-10 cm Light requirement: medium to high CO₂ supply: recommended Growth: fast Propagation: via side shoots Delivery form: InVitro cup (sterile cultivated) Manufacturer: Aqua ArtHydrocotyle sp. 'Japan' brings an unusually shaped, fresh green plant into the aquarium that is suitable for beginners and experienced aquascapers alike.

CHF 6.50

Customers also saw

Bucephalandra sp. Ulysses
🌿 Bucephalandra sp. 'Ulysses' InVitro Noble perennial plant with character Bucephalandra sp. 'Ulysses' from Aqua Art is an exclusive, slow-growing aquarium plant that impresses with its dark green to bluish shimmering leaves with slightly wavy edges. This variant is ideal for attaching to roots, stones or decorative elements - without planting in the substrate. Thanks to in vitro cultivation, it is free from snails, algae and pesticides - ideal for shrimp tanks, nano aquariums and natural aquariums. The plant is robust, easy to care for and decorative - even in low light and without a CO₂ supply.✅ Advantages at a glance: Staking plant with wavy, dark green leaves InVitro - sterile, pesticide-free and snail-free Slow-growing, very easy to care for Perfect for shrimp tanks, aquascapes and small aquariums No substrate required - ideal for roots or stones Eye-catching leaf structure with an elegant shimmer📋 Product details: Name: Bucephalandra sp. 'Ulysses' Type: Perennial plant Placement: Foreground to midground Growth height: approx. 5-10 cm Light requirement: low to medium CO₂ supply: not essential, but beneficial Growth: slow Delivery form: In vitro cup (sterile cultivated) Manufacturer: Aqua Art💡 Zoo Roco tip: Place Bucephalandra 'Ulysses' on dark hardscape such as lava rock or bogwood - this will show off the shimmering leaves particularly well. Plant glue or a fine nylon thread is suitable for attaching them.With its unique color effect, low requirements and high decorative quality, Bucephalandra 'Ulysses' is the perfect plant for modern aquarium layouts.

CHF 16.50

Cryptocoryne Spiralis 'Red
Cryptocoryne Spiralis 'Red' Cryptocoryne Spiralis 'Red' is an extremely decorative plant for the second level of an aquarium. It is characterized by narrow, strongly curled leaves with a dark brown-red coloration. This variety originates from India and is a true rarity.Difficulty of growing: mediumLight requirement: mediumCO₂ requirement: lowAdult plant height: up to 40 cmGrowth: moderateTemperature: 23-27°CPlacement in aquarium: second levelOrigin: Asia6 cm cup diameterCryptocoryne Spiralis 'Red' is a very special and beautiful plant native to Asia. It can be found from Bangladesh to India to the island of Sri Lanka. In its natural habitat, this Cryptocoryne grows along streams and rivers in forests and higher elevations with humid climates. It is still little known in Europe and is considered a rarity in aquaristics, especially since it is rarely available in stores. Cryptocoryne Spiralis 'Red' is characterized by its dark brown-red, narrow leaves, which are strongly wavy and resemble a stripe with a wrinkled edge. The leaves are grouped in a rosette. In appearance, this plant resembles another Zwittera variety, namely Cryptocoryne Cispatula var. Red Cryptocoryne Spiralis contrasts well with green plants and is ideal for the background of the aquarium. It is original and unusual, making it an eye-catcher.It is not very demanding in cultivation, does not require special care and does not need regular pruning. You just need to provide her with the right growing conditions. It needs moderate light. It has no special requirements for pH, which is 6.0-7.0. It prefers moderately hard water up to 10°. The plant does not need any special fertilization as long as a nutrient-rich substrate is available. It is good if it contains an addition of clay and peat. It is also important that it is at least 5-7 cm thick, as this variety develops a rather strong root system. It has long, creeping stems and easily reproduces by spreading. To obtain a seedling, simply divide it.Planting: The plant must be removed from the cup and thoroughly rinsed from the gel under running water. This is best done by placing the plant in a container of lukewarm water. Most of the gel will then fall off by itself. Divide the contents of the cup into 1-2 cm lumps and then place them at a small distance on the selected items.

CHF 16.90

Coco Cave with Anubias nana
Coco Cave with Anubias nana - aquarium plant from West Africa max. growth height 5-10cm Country of origin  West Africa Suitability community aquarium, perch aquarium, NanoCube Type  Perennial plant Family  Araceae Genus  Anubias Propagation  Division of the rhizome Growth rate  slowly pH 5-9 Water hardness very soft to very hard Notes  

CHF 19.90

Bucephalandra sp. Needle leaf
🌿 Bucephalandra sp. 'Needle Leaf' InVitro Delicate epiphyte plant from Aqua Art The Bucephalandra sp. 'Needle Leaf' from Aqua Art is a particularly elegant variant of the popular Borneo epiphytes. It is characterized by very narrow, needle-like leaves, which give it a delicate yet exotic appearance - ideal for nano aquariums, detailed areas in aquascaping or as a fine structural plant on roots and stones. Thanks to in vitro cultivation, you get a sterile, snail- and pesticide-free plant that is ideal for shrimp tanks and sensitive aquariums. Bucephalandra grows slowly, requires little light and no CO₂ - but is nevertheless color-stable and particularly decorative with stable water values.🌱 Advantages at a glance: ✅ Very narrow leaf shape - fine, needle-like structure ✅ InVitro - 100% free from snails, algae & pesticides ✅ Safe for shrimps & sensitive aquariums ✅ Perennial plant - ideal for roots, stones & decoration ✅ Easy to care for, slow-growing & permanently decorative📋 Product details: Name: Bucephalandra sp. 'Needle Leaf' Type: Perennial plant Position in the aquarium: Foreground to midground, on hardscape Growth height: approx. 3-6 cm Light requirement: Low to medium CO₂ supply: Not necessary, but beneficial Growth: Slow Delivery form: In vitro cup (grown sterile) Manufacturer: Aqua Art💡 Zoo Roco Tip: It is best to glue or tie Bucephalandra sp. 'Needle Leaf' to dark roots or lava rocks. This will accentuate the fine leaves particularly well - and the plant can establish itself optimally without being buried.

CHF 16.90