Oxy Plus O₂ Diffusor from Juwel

JBL ProHaru universal - Universal adhesive for the aquarium, terrarium and pond. Bonds both in and out of water JBL ProHaru universal is a permanently elastic hardening adhesive and sealant which is polymer-based. It bonds and seals almost all materials to each other, both in and out of water (except PE and PP).JBL ProHaru universal is suitable for the following applications, amongst others: First aid for leaking aquariums, wet areas of terrariums and ponds. After cleaning the site of the leak (removing algae etc.) it can be sealed with JBL ProHaru universal directly underwater. Making aquarium decorations and fixing them in an aquarium. Fixing corals in a marine aquarium. Fixing moss and plants when setting up scapes “dry”. Constructing aquarium components (filter partitions etc.) from a variety of materials e.g. glass and plastic. Constructing a terrarium from a variety of materials e.g. wood, glass, aluminium, plastic etc. JBL ProHaru universal is ready to use: 80 ml tube: Open the tube with the pin located in the lid, screw on the dosage nozzle and cut to the required length. Squeeze the end of the tube to release contents. The area to be bonded must be clean and free of dust or grease. If used underwater, the area must be free of any coating such as biofilm, algae etc. For large areas, the adhesive needs to be applied in several parallel strips. When used underwater, bonding strength may be lessthan on dry surfaces. Hardening occurs as a result of humidity at room temperature. JBL ProHaru universal gradually hardens from the outside to the inside. At low temperatures and/or low humidity, the hardening process takes considerably longer. Once opened, packs harden gradually and should therefore be tightly closed after use and used within a few weeks.  

Reduced algae growth and improvement of plant growth - Phorax helps! JUWEL Phorax is a highly effective filter medium used to break down phosphates in your aquarium. This effectively reduces the growth of algae and can contribute to improved plant growth. Phosphate regularly gets into aquariums through fish food and are naturally very unlikely to be broken down. However, plants need only tiny quantities of phosphate for their natural growth (fresh water: 0.05 mg/l, saltwater 0.01 mg/l). Too much phosphate can, in some cases, trigger prolific algae growth. Phorax consists of an aluminium mineral which binds dissolved phosphate by creating a water-insoluble aluminium phosphate and removing it from the water. This makes JUWEL Phorax highly effective, binding up to 12 mg of phosphate per gram of Phorax. Characteristics of JUWEL Phorax Reduces phosphate Slows down algae growth Promotes plant growth Suitable for use in freshwater and saltwater aquariums  

Hygrophila lancea 'Chai'A striking color distinguishes this foreground plant - an eye-catcher in any aquarium.Cultivation difficulty: moderately demandingLight requirement:  highCO₂ requirement: medium to highAdult plant height: Bushy, low growthGrowth: SlowTemperature: 20 - 28°CPlacement in aquarium: ForegroundOrigin: South Island Aquarium in Singapore. Cup diameter: 6 cm Unique pink Hygrophila 'Chai' is a striking variegated cultivar of Hygrophila lancea "Araguaia" that appeared at South Island Aquarium in Singapore. Its narrow-lineal leaves, curved to the side, are green only in the center, the margin is white to pink. The shade is reminiscent of that of Cryptocoryne wendtii 'Flamingo' and 'Pink Panther'. So like the normal 'Araguaia', Hygrophila lancea 'Chai' grows submersed rather spreading and strongly branched. We recommend for Hygrophila lancea 'Chai' rather strong lighting, CO₂ addition and good macro and micronutrient supply. Growth is slow, and occasional cutting of shoot tips encourages bushy growth. Just like other stem plants, you can propagate this Hygrophila by heading and partial cuttings. Hygrophila lancea 'Chai' provides a unique bright pink color accent in the mid to foreground, best as a smaller bushy group. It contrasts strongly with dark plants and decorative materials.Planting: The plant must be removed from the cup and thoroughly rinsed of gel under running water. This is best done by placing the plant in a container of lukewarm water. Most of the gel will then fall off by itself. Divide the contents of the cup into 1-2 cm lumps and then place them at a small distance on the selected items.

Carbon Sponge for Juwel internal filter Carbon Sponge for Juwel internal filter JUWEL Carbon Sponges absorb odour compounds and turbidity as well as toxic compounds in your aquarium, leaving the water crystal clear. The fact that active charcoal in the form of a sponge is used guarantees  even flow conditions for the filter medium, creating a very large and therefore highly effective surface. Due to these characteristics JUWEL charcoal filters are also perfect for filtering out residual medication after treating your fish. Characteristics: Absorbs odour compounds and turbidity as well as toxic compounds Ensures crystal-clear water Filters out residual medication Suitable for use in freshwater and saltwater aquariums 2 charcoal sponge filters per pack  

JBL Testlab - Professional Test case with 12 tests for freshwater analysis Simple and reliable control of the water values in aquariums. Determines: pH value, carbonate hardness, general hardness, phosphate, nitrite, nitrate, iron, silicate, ammonium/ammonia Add reagents to water samples, compare with colour charts, read values and look up on protocol sheet if and what action is recommended Laboratory comparator system to compensate the inherent water colouring, analysis record sheet, instructions for problem solving, CO2 table Child-proof reagent bottles, water-proof plastic case, refillable kit 1 test case for planted aquariums. Incl. 13 reagents, 6 glass vials, 2 syringes, 3 dosing spoons, thermometer, comparator block, 2 plastic cuvettes, colour charts, ball pen, analysis record sheets, instructions

Micranthemum umbrosum Micranthemum Umbrosum is a light green stem plant with small round leaves. Depending on how it is pruned, it is suitable for both the foreground and background of the aquarium. Difficulty of cultivation: easy Light requirement: medium, to high CO₂ requirement: medium Height of the adult plant: 20 cm Growth: fast Temperature: 22-26 °C Placement in the aquarium: Second level Origin: North and Central America Cup diameter: 6 cm Micranthemum Umbrosum (Round-leaved meadowfoam) is a naturally occurring plant in North and Central America. It grows both in water and in marshy areas. It is prized by aquarists for its unique appearance. The plant forms long stems with paired, alternate, small, round, light green leaves. It has a fairly well developed root system. It needs regular pruning and is easy to shape into a desired form. It is propagated vegetatively by cutting off the shoot tips and planting them in the ground. It likes water with a hardness of 2-12°N, a pH of 5.5-7.7 and a temperature of 24-26°C. It is sensitive to trypaflavin and can be damaged by snails. It has fairly high light requirements. With insufficient light, it pulls upward, and distinct gaps can be seen between the leaves. With sufficient light, it forms dense clumps that are pleasing to the aquarist's eye.Micranthemum umbrosum is usually placed in the background of the aquarium, but it also looks good in the foreground when cut short. It does not require absolute CO₂ fertilization, but grows much faster in its presence. When growing this plant, pay special attention to the proper concentration of iron in the aquarium water.. Planting:The plant must be removed from the cup and thoroughly rinsed from the gel under running water. This is best done by placing the plant in a container of lukewarm water. Most of the gel will then fall off by itself. Divide the contents of the cup into 1-2 cm lumps and then set them at intervals of 1 to 2 cm.