JBL CleroPond

Thread algae killer for garden ponds Söll Filamentous Algae Destroyer is the reliable solution for the targeted control of stubborn filamentous algae in garden ponds. With its unique active oxygen formula, the highly effective product removes filamentous algae quickly and sustainably - completely without copper and is gentle on fish, plants and the ecological balance.Contents: 250g for 8,000 liters or 500g for 16,000 liters Active ingredient: Active oxygen (without copper) Area of application: Garden ponds with fish and plants Application: Sprinkle directly on algae, ideal in calm weather ✅ Visible success in a very short time The filamentous algae dissolve just a few hours after application - without leaving any residue. The special formula ensures that dead algae residues are biodegraded and no nutrients are left behind. ✅ Safe for humans, animals and the environment Söll Filamentous Algae Destroyer is copper-free and therefore harmless to fish, amphibians and aquatic plants. Ideal for near-natural and ecologically maintained ponds. ✅ Simple application - targeted effect The granules are sprinkled directly onto the affected areas in the pond. The effect starts quickly and prevents the formation of new filamentous algae when used regularly.

AlGo Direct - Precise & fast filamentous algae control - 600g Summertime is algae time. If the green pests get out of hand, you should take countermeasures.AlGo Direct is the precise solution against filamentous algae, especially for locally infested areas such as streams, water features and bank zones. The highly active ingredient quickly kills the algae within a few hours and then breaks down into its natural components without leaving any residue. Thanks to this environmentally friendly formula, AlGo Direct is also suitable for swimming ponds.💧 Direct contact - immediate effect against filamentous algae⚡ Highly effective & targeted application - perfect for localized algae infestation🌊 For clear water - Supports water quality by quickly removing algae🌱 Residue-free & safe - active ingredient breaks down into natural componentsSafe & effective application ✔ At least 3 °dKH carbonate hardness required - Includes rapid KH test for optimum dosing✔ Simply apply specifically to affected areas ✔ Also suitable for bathing & swimming pondsCombat filamentous algae efficiently & precisely now! 🔍 Note: Use biocidal products with care. Always read the label & product information before use!Dosage: Add 60g (= approx. 50ml) of product to 1000 liters of pond water.Application: Switch off the pond pump if the water movement is too strong. Dose the required quantity according to the instructions in the cup supplied. Sprinkle evenly on the algae nests (Caution: Do not sprinkle on aquatic plants). Do not premix the product. Ensure a reaction time of 1 - 2 hours. Animals can remain in the pond. Repeat application with the same dosage after 3 days at the earliest if algae growth resumes. After each algae treatment, nutrients are released which are ideally bound by products of category B. Store in a cool, dry and frost-free place. Filling level technically limited.

AlGo Universal - Effective algae killer for crystal clear pond water - 500mlTargeted control of filamentous algae, smear algae & other types of algae - mostly used in summer.AlGo Universal is your reliable helper against the most common types of algae and ensures a clear, healthy pond. The algae killer covers the entire pond, even in hard-to-reach areas, and develops its full effect within two to three weeks.Advantages of AlGo Universal🌱 Gentle on plants & fish - Well tolerated when used properly⚡ Targeted effect - Also ideal for local algae problems, e.g. in streams🌊 Fast results - Effective algae control from the very first application💦 Suitable for swimming ponds - the active ingredient is also safe for bathing waterApplication instructions for the best results ✔ Remove algae mechanically in advance - Use the OASE EasyPick pond tongs, for example ✔ Increase the oxygen supply - Recommended: One OxyPlus application 24 hours after AlGo Universal ✔ Shake the product well - For even distribution in the waterStop algae growth now & get your pond in top form! 🔍 Included: KH quick test for safe application Use biocidal products with care. Always read the label and product information before use!Dosage: Add 50ml product to 1000 liters of pond water. Application: Dose the required amount according to the instructions in the cup provided. Then distribute evenly in the pond. Effective within 2 - 3 weeks. Remove dead algae. Switch off the UVC device for 7 days after use. After application with half dosage after approx. 4 weeks. After each algae control, nutrients are released which are ideally bound by products of category B. Store in a cool, dry and frost-free place.

PhosLess Direct - Natural algae protection & phosphate remover - 500mlEffective phosphate control for clear water and a healthy pond - for use in spring.PhosLess Direct reduces algae growth in a natural way by physically removing phosphate from the water - without any chemical additives. At the same time, it binds hydrogen sulphide, preventing unpleasant, foul odors. This makes PhosLess Direct perfect as a quick solution for acutely high phosphate levels or after algae treatment.Advantages of PhosLess Direct:✔ Fast action - Reduces phosphate levels below 0.035 mg/l, the critical limit for algae growth✔ Clear water quality - restores the natural nutrient balance in the pond✔ Effective & safe - Physically removes phosphate without harming the ecosystem ✔ O dour control - Binds hydrogen sulphide and prevents foul odours The best time to use PhosLess Direct🍃 Spring: Ideal for preventing algae problems during the pond season🌊 After algae treatment: Stabilizes the pond and prevents new algae blooms ⚡ In the event of acute phosphate excess: Immediate help for a healthy pond climatePhosLess Direct - The natural emergency brake against algae growth! 🌿💦Use biocidal products with care. Always read the label and product information before use!Dosage: 500 ml PhosLess Direct binds up to 110 g of phosphateApplication: Spread approx. 50 ml per 1000 liters evenly over the surface of the pond when there is no wind. Do not sprinkle directly on plants. Ensure sufficient mixing in the pond. The water will turn whitish to reddish in color while it is working. Throttle the filter system during application. Ensure sufficient aeration. If the water is clear again after approx. 24 hours, the settled active complex can be siphoned off or removed from the water. Remaining residues are harmless and store the phosphates sustainably. Depending on the nutrient load, top up every 6 - 8 weeks. In case of contact with eyes, rinse immediately with plenty of water and consult a doctor. Store in a dry place.

Algae killer Protect for garden and swimming pondsUnfortunately, Switzerland is no longer supplied Helps against filamentous and smear algae 150 g for 10,000 liters Quickly and reliably removes floating and filamentous algae in the garden pond No foaming Proven a thousand times over Contains natural living microorganisms. 150 g of the granules are sufficient for a maximum of 10,000 liters of pond water. Use the appropriate dosage for other pond volumes and depending on the severity of the algae infestation. Use or sprinkle Algae Killer Protect according to the dosing instructions in the special fabric bag. Algae Killer Protect is a combination product for the effective control of floating and filamentous algae. The dead algae are decomposed by microorganisms. Algae decomposition requires oxygen, so ensure a sufficient supply of oxygen if fish are present. Switch off UV lamps during use. Labeling according to EU Directive 98/8 EC: Use algicides safely! Always read the label and product information before use! Contains: natural live nitrifying microorganisms and natural live denitrifying microorganisms (3x10h8 per g), 0.2 g terbutryn / per 150 g with trace elements; silicon, zeolite, calcium, magnesium, cobalt, etc.

Sera pond Phosvec 500mlSera Pond Phosvec protects your garden pond from algae. It limits nutrients and is a nutrient competitor for algae. Sera Pond Phosvet binds phosphate immediately.Phosphate is the most important algae nutrient. In the garden pond, it accumulates quickly as a decomposition product. A massive and therefore dangerous increase in algae is then almost always the result.Sera pond Phosvec binds phosphate quickly, gently and permanently. The uncontrolled proliferation of disturbing algae is prevented right from the start and stopped in the long run by this effective, sustainable prophylaxis by means of nutrient limitation.500ml for 5000l garden pond

JBL Stabilo Pond Basis - Grundpflegemittel für Gartenteiche Bildet die absolut notwendige Grundlage für eine erfolgreiche Teichpflege ohne Algenprobleme. Schafft ein natürliches, biotopgerechtes Klima im Teich durch stabile und artgerechte KH-, GH- und pH-Werte. Bildet die Lebensversicherung der Fische und anderen Teichlebewesen. Führt dem Teich lebenswichtige Mineralien zu. 100 g Granulat auf 1000 l Teichwasser einfach einstreuen.

JBL SediEx Pond - effektiverSchlammabbau für den Gartenteich Granulat mit lebenden Bakterien zum Einstreuen für die Mineralisierung des Teichschlamms. Wichtig: 2 Komponenten-System aus Bakterien und Aktivsauerstoff. Schafft gesundes Teichwasser und verhindert Fäulnisprozesse am Teichgrund. Hilft Fischverluste zu vermeiden. Reduziert Algenwachstum durch Verbrauch überschüssiger Nährstoffe. 250g reicht für 2500 Liter

JBL CleroPond - gegen Wassertrübungen Beseitigt schnell und zuverlässig alle Arten von Wassertrübungen. Flockt die Trübungen aus, die dann vom Filter entfernt werden können. 500ml reicht für 10'000 Liter

JBL Stabilo Pond KH 250g  - PH Stabilisator für Gartenteiche Stabilisiert den pH-Wert (Säuregehalt) auf optimale 7,5 – 8,5 durch Erhöhung der Karbonathärte (KH). Schafft stabile Voraussetzungen für die nachfolgende Algenbekämpfung. Verhindert Fischverluste bei Algenblüten. Bindet Schwermetalle und fördert den Abbau von giftigem Ammoniak. Ist das wahrscheinlich wichtigste Produkt für jeden Gartenteich! FAQ Was ist der Unterschied zwischen JBL StabiloPond Basis und JBL StabiloPond KH? JBL StabiloPond Basis hebt die Gesamthärte und die Karbonathärte gleichermaßen an, JBL StabiloPond KH hebt die Gesamthärte zur Karbonathärte im Verhältnis 1:2 an. Wie und wann dosiere ich JBL StabiloPond KH? JBL StabiloPond KH dosiert man:Am Abend vor Algenbehandlungen, damit ausreichend Pufferkapazität zur Stabilisierung des pH-Wertes vorhanden ist.Nach Starkniederschlägen (Sommergewitter), da neben dem Verdünnungseffekt durch den Regen auch die Karbonathärte stärker abgebaut werden kann (Stichwort: Saurer Regen).Bei Erstanwendung oder Karbonathärte 0 werden 200g / 1.000 l Teichwasser dosiert, Bei Folgeanwendungen reichen 100 g / 1.000 l Teichwasser.Das Pulver wird in den Teich eingestreut. Nicht vorher in Wasser auflösen, es kommt zur Aufschäumung und die stabilisierende Wirkung auf das Teichwasser verringert sich. Ich habe JBL StabiloPond KH abends und JBL Algo Pond Forte morgens dosiert, wie in der Anleitung beschrieben. Ich konnte allerdings keine Wirkung feststellen. JBL StabiloPond abends dosiert und JBL Algo Pond Forte morgens ist die richtige Vorgehensweise. Doch braucht der Wirkstoff ja nach Rahmenbedingungen des Teiches 2-5 Tage, ehe die Algenentwicklung sichtbar zurück geht. Innerhalb weniger Stunden ist dies nicht möglich. JBL AlgoPond Forte kann bei Erfordernis nach 4-6 Tagen nachdosiert werden, dies ist in Einzelfällen bei sehr starker Algenentwicklung sinnvoll. Können die Teichpflege-Produkt JBL StabiloPond Basis, JBL StabiloPond KH, JBL OxyPond, JBL FilterStart Pond, JBL AlgoPond Direct*, JBL PhosEx Pond Filter, JBL SediEx Pond, JBL AlgoPond Sorb, JBL AgoPond Forte*, JBL, AlgoPond Green*, JBL PhosEx Pond Direct, JBL BactoPond ohne Probleme mit einem in Betrieb befindlichen UV-C Wasserklärer verwendet werden, oder sollte die UV-C Lampe ausgeschaltet werden ? Vereinfacht kann man sagen, daß bei Anwendung der Flüssigprodukte JBL AlgoPond Sorb, JBL AgoPond Forte*, JBL, AlgoPond Green*, JBL PhosEx Pond Direct, JBL BactoPond der UV-C Klärer vorübergehend auszuschalten ist, damit die Wirkstoffe nicht zerstört werden. Die Zeiträume entnehmen Sie bitte den jeweiligen Anwendungshinweisen.Bei JBL StabiloPond Basis, JBL StabiloPond KH, JBL OxyPond, JBL FilterStart Pond, JBL AlgoPond Direct*, JBL PhosEx Pond Filter, JBL SediEx Pond kann der UV-C Klärer in Betrieb bleiben.

JBL AlgoPond Sorb Organic algae blocker for the pond Crystal clear water by reducing algae growth - biological algae blocker for the pondEasy to use: Calculating needs, mixing with pond water in watering can, even distribution over pond Sunglasses effect: Reduction of light radiation has a preventive effect against algae Active iodine and vital substances to promote healthy fish, no reduction in pH or hardness in the pond Scope of supply: Organic Algae Blocker, AlgoPond Sorb. Dosage: 40 ml to approx. 700 - 800 l of pond water

TetraPond UV Booster für Teiche Verbessert die Leistung von UV-Klärern schafft kristallklares Wasser: Beseitigt grünes Wasser (Schwebealgen) und Verfärbungen schafft gesundes Wasser: Beseitigt Keime, die schädlich für Fische sind beseitigt unangenehme Gerüche garantiert daher eine bessere Wasserqualität Wirkungsweise: bei ultraviolettem Licht produziert das Produkt starke Hydroxyl-Radikale, die die Zellmembranen der Algen zerstören. Das Produkt ist zur sicheren Lagerung mit einer gasdurchlässigen Kappe versehen. besonders einfache und genaue Dosierung Vor Gebrauch Flasche gut schütteln. Mit der Dosierkappe 50 ml auf 1.000 Liter abmessen. Bei starker Verunreinigung die Behandlung nach 24 Stunden wiederholen. Danach wenn nötig wöchentlich anwenden.