Aqua Elixier Water treatment

Chihiro's magnetic stirrer for 4 bottles - Efficient & uniform mixing of liquidsThe Chihiros magnetic stirrer for 4 bottles is the perfect solution for anyone who wants to mix liquids efficiently and evenly in the aquarium or laboratory sector. With modern magnetic stirring technology and a compact design, this practical device ensures optimum mixing of a wide variety of liquids - quickly, reliably and in a space-saving manner.Efficient mixing for the best resultsThanks to the powerful magnetic technology, the Chihiros magnetic stirrer ensures an even solution of additives, nutrients or other liquids. This is particularly important for stable water chemistry in the aquarium or for precise applications in the laboratory.Advantages of the Chihiros magnetic stirrer:Efficient & uniform mixing of liquidsSuitable for up to 4 bottles at the same timePowerful magnetic technology for reliable resultsEasy to set up & operateCompact, space-saving design - ideal for use in aquarium care, laboratory and hobby areasApplication:Ideal for mixing aquarium additives, fertilizer solutions, nutrients or other liquidsPerfect for aquarium enthusiasts, laboratories, DIY projects and professional applicationsWith the Chihiros magnetic stirrer for 4 bottles, you can achieve homogeneous solutions at all times - for optimum results and the highest quality.

osmosis Remineral+ Multi-mineral salt for osmosis water and other soft water For hardening and mineralization Increases total and carbonate hardness Stabilizes the pH value With valuable minerals and trace elements such as boron, fluorine, iodine Selected organic active ingredients activate the filter bacteria.Multi-mineral salt for osmosis water and other soft water ReMineral+ enriches osmosis water with all the important minerals required in the aquarium.The carefully balanced multi-mineral preparation is based on the natural composition of tropical waters. Total and carbonate hardness builders stabilize the pH value. In addition, fish and plants are supplied with valuable trace elements such as boron, fluorine, iodine and others. Vital B vitamins protect against stress. Selected organic active ingredients activate the filter bacteria.Dennerle uses only high-purity mineral salts in pharmaceutical quality. With ReMineral+, water can be produced that tropical aquarium fish and plants are used to from their natural home waters. It is ideal for all freshwater aquariums, especially for discus! Dosage and application 10 g (1 dosing spoon) per 100 liters of aquarium water Contents: 250g

AMTRA PRO NATURE PLUS AMTRA PRO NATURE PLUSThis organic conditioner consists of a 100% natural formula and converts tap water into biologically suitable aquarium water.Effect: It creates optimal living conditions for freshwater fish and neutralizes chlorine, heavy metals and other toxic substances.Benefit: The conditioner protects the mucous membranes of the fish, promotes their metabolism and strengthens the immune system. It supports the efficient absorption of trace elements by fish and plants and produces an amber-colored, tannin-rich water that is typical of the natural habitats of tropical fish.Composition: A completely natural product based on organic carbon compounds.Application: 4 ml per 100 liters of tap water. Shake well before use. Suitable for freshwater aquariums only. 150ml can be used for 3750 liters of water, 300ml for around 7500ml.

ARKA carbon filter for 190/380lARKA myAQUA® carbon filter safely and effectively removes chlorine, herbicides, pesticides and drug residues and is ideal for use with many commercially available osmosis systems, such as our ARKA myAQUA® 190 & ARKA myAQUA® 380. ARKA myAQUA® carbon filter contains high-quality activated carbon for optimum results and clean water.

ARKA Membranes 190/380ARKA myAQUA® Membrane 190 safely and effectively removes up to 99 % of pollutants, salts, pesticides, heavy metals and bacteria and is suitable for use with our osmosis system ARKA myAQUA® 190 or ARKA myAQUA® 380. ARKA myAQUA® Membrane 190 consists of a multi-layer polymer film which achieves a very high retention rate thanks to its very fine pores (0.0001 microns).

Arka osmosis system Suitable for freshwater and saltwater aquariums The ARKA reverse osmosis system offers a powerful, chemical-free and electricity-independent solution for water treatment. Using the power of water pressure, it effectively filters 99% of salts, bacteria and harmful substances such as nitrite, phosphate and heavy metals from conventional tap water. The water purified in this way creates a safe and pleasant environment for marine and freshwater inhabitants, without the need for electricity or chemical additives. Its operating principle is based solely on water pressure and natural filter materials. The multi-layer polymer film with extremely fine pores (0.0001 micron) ensures a high retention rate.Technical details:Filter capacity: Up to 190 liters or 380 liters per dayOsmosis water to residual water ratio: 1:3 - 4Operating pressure: 3 to 8 barTemperature: 1 to 30 degrees CelsiusSalt retention capacity: TFM polyamide - polysulfoneThe system components, including the carbon and fine filters (cartridge) and the membrane filter, require regular replacement intervals:Membrane filter: Replacement every 24 months after commissioningCarbon filter: Maximum capacity of 5,500 liters or replacement every 6 months after commissioningFine filter: Maximum capacity of 11,000 liters or replacement every 3 months after commissioning.

Microbelift Artemiss - freshwater and saltwaterHerbal-based care preparation, helps with fungal and bacterial infectionsSupports your fish without disturbing the biological balance of the aquariumHarmless to all marine and freshwater fish as well as lower animals, corals and plants100% natural liquid treatment for bacterial diseases in fishProvides a chemical-free treatment that combats bacterial diseases such asBacterial dropsySwollen eyesFungusUlcersMilky skinMouth rotFin/tail rotRaised scalescan help.MICROBE-LIFT/Artemiss is a unique herbal immunostimulant that can reduce bacterial and fungal infections in fish. It helps to strengthen the fish's natural immune system without the risk of resistance that can occur with the use of antibiotics. In addition, Microbe-Lift Artemiss can help to expel pathogenic bacteria from the fish, which will eventually die without a host.Stimulates and accelerates the regeneration of damaged tissue until there is no trace of the wound left.PrecautionsDo not use with other medications or treatments. Do not use with algaecides or copper-based products. Avoid contact with the eyes. In case of contact, rinse eyes thoroughly with cold water. Keep out of the reach of children This product is intended for all ornamental and aquarium fish only and must not be used on fish intended for human consumption.

Herbatana from Microbe-Lift - 118mlCare preparation based on herbs, can help with parasitic diseasesSupports fish, without disturbing the biological balance of the aquariumHarmless for all marine and freshwater fish as well as lower animals, corals and plants100% natural care product for parasitic diseases. Provides a chemical-free treatment that fights parasitic diseases such asWhite Spot (Me) Costia Platworms (gills and skin) TrichodinaChilodonellaOodinium.MICROBE-LIFT/Herbtana is a unique, herbal, immunostimulant for freshwater and marine inhabitants. Parasitic infections can be recognized by symptoms such as milky skin, blinking and heavy breathing. Parasites are usually always present in very small quantities in most fish. They are naturally fought off by the fish's immune system. When stress levels rise, the immune system's ability to do its job of natural parasite control is directly impaired. This inadequate response allows the parasites to multiply and cause the serious health problems of the host fish mentioned above. MICROBE-LIFT/Herbtana supports the immune system of the fish and expels the excess parasites. Since they cannot return to the fish during treatment, most parasites starve to death without a host.MICROBE-LIFT/Herbtana is safe for all aquatic life. It is an excellent aid for acclimating new fish.PrecautionsDo not use with other medications or treatments. Do not use with algaecides or copper-based products. Avoid contact with eyes. In case of contact, rinse eyes thoroughly with cold water. Keep out of the reach of children. This product is intended for all ornamental and aquarium fish only and must not be used on fish intended for human consumption.

Bio-Exit SilicateBio-Exit Silicate binds excess silicate in the water, so that their aquarium without unsightly brown coatings on gravel & plants, can shine.Silicates occur in tap water or are released from the soil. Silicates can promote the growth of diatoms (diatoms), which can form a brown coating on plants and soil. Diatoms are not toxic or harmful, but the appearance suffers from the algae.Tip: Should you do a silicate test again after administering Bio-Exit Silicate, the value will still be displayed - this because the Bio-Exit Silicate binds and converts the silicate and does not neutralize it.Dosage. 10 ml per 20 liters on day 1 and on day 3. No water changes within 7 days after the first dose.

JBL Pro Clean BAC Cleaning bacteria that instantly clean your aquarium. A cartridge filled with cleaning bacteria that will keep your aquarium clean and your fish healthy. These bacteria are among one of the good bacteria that transform toxins into harmless ones. Various JBL bacteria products contain high concentrations of certain strains of bacteria that, for example, convert problematic nitrogen compounds such as ammonium (NH4), ammonia (NH3) and nitrite into harmless nitrogen compounds (nitrate (NO3) or nitrogen gas (N2)). You also don't need to worry about overdosing the Pro Clean BAC because the bacteria will extract your nutrients from these nitrogen compounds and if they don't eat enough, these bacteria will die. Helps keep the aquarium cleanBefore use, shake the cartridge and empty the entire contents into the aquariumSupports the filter, breaks down pollutants and cleans the bottomBest used after a water change, adding a new fish or cleaning the filter

SuperFish Digi Test pHDigital ph meter for aquariums and pond water. This digital meter measures ph with an accuracy of up to 0.02 units, has an automatic calibration function and makes measuring ph much easier.Accurate pH meter for aquariums and. pond water.Measures pH from 0 to 14 with an accuracy of up to 0.02 units.The device features an automatic calibration function for 1-point (6.86) and 2-point calibration (4.00 - 9.18).Calibration powder is included.Automatic power off after 5 minutes.UseRemove the protective cap before use.Press the power button. Submerge the pH meter up to the Immersion line into the water. The meter is NOT waterproof, never immerse the Never immerse the meter beyond the immersion line. beyond the immersion line into the water.Wait about 30 seconds until the reading is numerically constant.Read the pH of the water.Rinse the electrode with distilled water. rinse, dry with a cloth and put the protective cap.Avoid heat and direct sunlight. 1-point calibration 6.68 The calibration accuracy is ± 0.1 pHDissolve the pH 6.86 buffer powder in a beaker with 250 ml of distilled 25°C warm water.Dip the pH measuring instrument into the water with the pH 6.86 solution and wait about 30 seconds.Press and hold the CAL button for 5 seconds.The display will begin to flash 6.86. When it stops flashing, the pH meter has been calibrated.Rinse the electrode with distilled water. rinse with distilled water, dry with a cloth and put the Put on the protective cap. 2-point calibration 4.00 and 9.18 The calibration accuracy is ± 0.02 pHDissolve the pH 4.00 buffer powder in a beaker with 250 ml of distilled 25°C warm water. Dissolve the buffer powder pH 9.18 in another beaker.Dip the pH meter into the water with the pH 4.00 solution and wait about 30 seconds.Press and hold the CAL button for 5 seconds.The display will begin to flash 6.86.Press the CAL button briefly immediately.The display will flash 4.00. Wait until the flashing stops.Rinse the electrode with distilled water. water.Now immerse the pH meter in the Water with the pH 9.18 solution and wait about 30 seconds.Press and hold the CAL button for 5 seconds.On the display begins to flash 6.86.Press the CAL button immediately briefly.On the display flashes 4.00. Press the CAL button again immediately.On the display now flashes 9.18. If it stops stops flashing, the pH meter is calibrated.The electrode with distilled water Rinse with distilled water, dry with a cloth and put the protective cap on.Care: Keep the electrode clean and dry. Always close the meter with the protective cap. Warranty 1 year manufacturer's warranty. Damage due to improper use (battery leakage, water damage) is not covered. Lift the proof of purchase for proof of warranty. for proof of warranty. The warranty will be voided without proof of purchase! The batteries supplied free of charge have a life of one year. If they are empty at the time of the empty, you must replace them yourself. replace them yourself.

SuperFish Digi Test EC-TDS3-in-1 TDS meter with plug&play function. High performance and fast test results.SuperFish Digi Test EC-TDS. Accurate 3-in-1 TDS meter for. Aquarium and pond water.Measures 3 different values: conductivity (EC), total dissolved solids (TDS) and. Temperature in Celsius (°C) and Fahrenheit (°F).Calibration is not required.The meter has an automatic Temperature compensation function.Automatic shutdown after 5 minutes. UseRemove the protective cap before use.Press the on/off button.Submerge the EC-TDS meter up to the Immersion line into the water. The meter is NOT waterproof, never submerge it beyond the immersion line into the water.The test results are saved automatically after 5-10 Seconds automatically saved. To achieve a better temperature measurement, press CLEAR and repeat the Test. The test results can also be stored by Pressing HOLD to save.Take the meter out of the water, to read the test results.Press the MODE button to toggle between the test modes (ppm, μS/cm, °C and °F).Pressing the CLEAR button will clear the test results are cleared for a new measurement.Wait 30 seconds before starting a new start a new measurement.Wipe the electrode clean, switch off the turn off the meter and replace the protective protective cap back on.Avoid heat and direct sunlight.Care : Keep the electrodes clean and dry. Always close the meter with the protective cap. Please note!  The color change of the display (green/red) has no meaning..