Trixie thermometer and hygrometer, digital

Repto Smart Easy Thermostat – Terrarium Temperature ControllerSafer heating in the terrarium: The Repto Smart Easy Thermostat controls heating mats, heat lamps and radiant heaters, offers day/night modes and alerts you if the temperature is too high or too low.The Repto Smart Easy Thermostat is a practical temperature controller for terrariums and helps you create a stable climate for reptiles, amphibians and invertebrates. It is suitable for controlling heating mats, heat lamps or radiant heaters and helps to reliably maintain the desired temperature in the terrarium. The temperature sensor measures the heat inside the terrarium. The connected heating device is automatically switched on or off depending on the set temperature. This allows you to minimise temperature fluctuations and provide your animals with a better-controlled environment. The day and night modes are particularly useful. These allow you to set different temperatures for daytime and night-time, which more closely mimics the natural temperature drop found in many habitats. In addition, the thermostat features alerts for temperatures that are too high or too low, as well as a switchable 12/24-hour clock. It can also be mounted using suction cups or screws.Your benefits at a glanceThermostat for temperature control in the terrariumSuitable for heating mats, heat lamps and radiant heatersWith a temperature probe for precise measurementDay and night modes for different temperaturesWarning function for excessively high or low temperatures12/24-hour display adjustableCan be fixed using suction cups or screwsSupports a controlled terrarium climateIdeal for many reptiles, amphibians and invertebratesEasy to operate via the display and buttonsSize:- 70 mm x 193 mm x 380 mmDirections for usePlace the temperature sensor at the point in the terrarium where the temperature is to be reliably monitored. Connect the heater to the thermostat and set the desired day and night temperatures. You should also check the temperature regularly with a separate thermometer, particularly after the initial set-up or following any changes to the terrarium.Zoo Roco TipFor reptiles, it is not only the average temperature that is important, but also an appropriate temperature gradient within the terrarium. Position heat sources so that a temperature gradient is created. This allows your pet to make a Wahl between warmer and cooler areas.

Zoo Med Environmental Control Center - 6-way terrarium controller for temperature, humidity & lightThe Zoo Med Environmental Control Center is a comprehensive control unit for the automation of heating/cooling, humidity and lighting in the terrarium. With 6 slots, 2 temperature sensors and 1 humidity sensor as well as alarm and memory functions, it supports stable values and realistic day/night sequences.Advantages: 6 slots for heating, cooling, humidity and timer functions 2 temperature probes + 1 humidity probe for precise control Programmable night setback for natural temperature curves Alarm function for extreme values (temperature/humidity) Memory function for settings in the event of a power failure Total load up to 1850 W (combined, limited per channel)The Zoo Med Environmental Control Center is the central control point for modern terrarium technology. It automates temperature, humidity and lighting and helps to set constant husbandry conditions and a natural day/night rhythm. Ideal for reptiles, amphibians and planted terrariums where reliable control of the technology is crucial. Slots / channels (overview) 1: Dimming Heat - dims a heat source to maintain a constant temperature 2: Heat/Cool - switches heating or cooling depending on the setting 3: Humi/Dehumi - controls humidification or dehumidification (e.g. fogger/ventilation) 4: Timer - switchable with time program (additional consumers) 5 & 6: Day/Night - separate switching for day and night devices (e.g. light/night light) Important note: The dimming channel is not suitable for certain lamp types (e.g. some UV/special lamps). Please observe the manufacturer's instructions for the lamps used.FAQ 1. which terrariums is the control unit suitable for? For most terrarium set-ups with reptiles, amphibians or plant terrariums in which temperature, humidity and light are to be controlled automatically. 2. what exactly can the device control? Depending on the connected devices, it controls heat sources, cooling (e.g. fan), humidification (e.g. fogger/mister), dehumidification/ventilation and lighting via timer and day/night switching. 3. are sensors included in the scope of delivery? Yes, 2 temperature probes and 1 humidity probe are usually included (for immediate commissioning). 4. can a night setback be set? Yes, a night setback can be programmed so that the temperatures behave more naturally at night. 5. will the appliance continue to function after a power failure? The settings remain saved. Depending on the situation, it may be necessary to set the time again so that timer functions run accurately again. 6. do I also need a thermometer/hygrometer? Not necessarily, as the appliance works with probes. However, a separate measuring device may be useful for additional monitoring (e.g. at a different position in the terrarium). 7. which devices should not be operated on the dimming channel? Not every lamp or heat source is dimmable (e.g. certain UV/special lamps). Please always check whether the connected device is approved for dimming - otherwise use the switching channels (Heat/Cool).8. how to position the probes correctly? It is best to position the temperature probes where the target values are relevant (e.g. warm area and cool area). Position the humidity probe so that it does not hang directly in the water jet of a fogger in order to avoid incorrect measurements.

Exo Terra Terrarium Mini Fan Quiet, efficient fan for optimal air circulation in the terrarium The Exo Terra Terr arium Mini Fan is a compact, energy-efficient, low-voltage fan specially designed for terrariums. With its virtually silent operation, it ensures optimal ventilation and fresh air circulation, reduces stagnant air and creates a healthy climate for animals and plants. Good air circulation is crucial for the well-being of reptiles, amphibians and tropical plants. The mini fan improves air exchange, prevents condensation and reliably prevents mold and fungal growth.Product features Improved air circulation: Increases the air exchange and ensures continuously fresh, oxygen-rich air in the terrarium. Virtually silent operation: The high-quality 9-blade fan with ball bearing system runs quietly and reliably - ideal for living spaces. Effective humidity regulation: Prevents condensation, reduces stagnant mist and supports a stable humidity level. Natural climate simulation: Can be combined with a timer to realistically simulate day/night cycles and natural humidity fluctuations. Healthy environment: Prevents respiratory infections in animals, prevents anaerobic bacteria from thriving and eliminates unpleasant odors. Plant-friendly: Reduces heat stress, improves nutrient uptake and promotes vigorous plant growth in tropical terrariums. Energy efficient and safe: Only 1 watt power consumption with safe low-voltage operation. Easy to install: Easy to attach to the mesh grille cover with four fixing pins - no tools required. Flexible orientation: Can both direct air into the terrarium and draw it out - depending on the desired climate effect. Durable and versatile: Robust construction and soft silicone cable for flexible positioning. Advantages of the Exo Terra Terrarium Mini FanThe Exo Terra Mini Fan offers numerous advantages for pet owners and plant lovers. It significantly improves the air quality in the terrarium by removing stagnant air and supplying fresh air. The gentle air flow prevents excessive humidity, reduces the risk of mold and ensures a clear view of the terrarium inhabitants. At the same time, it protects animals from respiratory diseases and supports natural behavior through realistic humidity and temperature cycles. Plants also benefit: The even air flow reduces heat stress, promotes growth and boosts vitality. Thanks to its quiet, energy-efficient operation and simple installation, the mini fan is ideal for everyday use - reliable, safe and low-maintenance.Technical data Power: 1 watt Voltage: Low voltage (safe operation) Fan: 9-blade system with ball bearings Noise level: Very quiet Installation: Plug & play with 4 retaining pins Material: High-quality, durable components Connection: Flexible silicone cable, compatible with standard mains adapters

Terra Fan - Constant air circulation & optimum terrarium climateThe Terra Fan ensures reliable, constant air circulation and therefore a stable, healthy climate in the terrarium. Thanks to the integrated digital display and precise temperature and humidity sensor, you can keep an eye on all the important climate data at all times.With two adjustable speeds, the air flow can be optimally adapted to the needs of your terrarium animals and the terrarium furnishings. The Terra Fan effectively prevents waterlogging, mold growth and heat build-up and ensures fresh, evenly distributed air - a basic requirement for keeping many reptiles, amphibians and invertebrates.In tropical terrariums in particular, it contributes to a stable microclimate and improved air quality. Thanks to its compact, lightweight design, the Terra Fan can be positioned flexibly and is easy to install. It is operated via a standard USB power supply unit (5 V, min. 1 A, not included) and is therefore particularly energy-efficient.Product advantagesIntegrated digital display shows temperature & humidity in real timePrecise combination sensor for optimum climate managementTwo adjustable speeds for individual ventilationPrevents waterlogging, heat and humidity build-upEffectively minimizes the risk of mould growth and odoursIdeal in combination with Hygro System & Humidity Control IICompact, flexible design - easy to installUSB-compatible for uncomplicated operation (power supply unit not included)Technical data: DimensionsDimensions: 9.5 × 9.5 × 3 cmWeight: 158 gInput voltage: DC 5 V / 1 A (USB-compatible)Power: max. 5 WTemperature measuring range: 0 °C to 80 °CHumidity measuring range: 10 % - 95 % rHTemperature accuracy: ± 1 °CHumidity accuracy: ± 1 %Sensor cable length: 130 cmCable length USB connection: 130 cm

Trixie analogue Thermometer This analogue thermo-/hygrometer has a measuring range from -20 °C to 50 °CEasy to attach with adhesive strips on the back.Size: Ø 5 cm

Trixie thermo/hygrometer - analogThis analog thermo/hygrometer has a measuring range of -25 °C to 55 °C anda humidity measurement of 0 % to 100 %.Easy to attach with adhesive strips on the back.size: Ø 7.5 cm

JBL TerraControl - Thermometer and hygrometer incl. suction cup Easy check thermometer for the relative humidity and the temperature in terrariums Temperature range: -30 to +60 degrees Humidity values: from 0 to 100% in steps of 10% Area between 20 and 35 is marked as "optimal“ Package contents: 1 thermometer and hygrometer, Terra Control, incl. suction cup. Easy monitoringDepending on the origin and species the terrarium animals need specific humidity and temperature conditions for their ideal keeping. They easily can be monitored with Terra Control.Terra ControlThe Terra Control thermometer and hygrometer allows monitoring over a temperature range -30 to +60 degrees. The humidity is displayed in 10 % steps from 0 to 100 %. The range between 20 and 35 is marked.

Lucky Reptile Thermo-Hygrometer Min/Max High-quality, analog thermo/hygrometer with good precision for terrariums Measures the humidity and temperature in the terrarium With min/max temperature display Ideal for terrariums High precision Extra large for easy reading 10cm diameter This high-quality, analog thermo-hygrometer has good precision and displays reliable values. Thanks to its 10 cm diameter and large numbers, it is very easy to read and also shows the highest and lowest temperature in the measurement period. Ideal for use in terrariums where the values need to be determined more accurately.

Lucky Reptile - Thermometer Analogue measuring Thermometer These analogue measuring devices are perfect for environments with high humidity. They have to be installed inside the terrariums as the temperature/humidity is measured directly at the device. Adhesive tape at the back of the device allows for quick and easy installation. Available are a single thermometer, a single hygrometer and a thermo-/hygrometer combination.  

Thermo Control Pro II circuits Thermo Control PRO II Professional digital thermostat with programmable night setback and timer The Thermo Control PRO II is a further development of the Thermo Control II. The main differences are a real-time clock and two temperature ranges so that different temperatures can be set for day and night. Switching between day/night operation is time-controlled. In contrast to the Thermo Control II, the time can be set in units of minutes for the timer on this model. There are two possible ON/OFF times. In addition, the device can be switched between heating and cooling mode, e.g. for operating fans. When the set temperature is reached, the thermostat switches on instead of off. The maximum switching capacity is 1000W and the temperature range is 0-50°C. In the past, under certain circumstances, a large number of faults have occurred in a batch of devices. These have now been rectified and the current devices work faultlessly! Please note that the Thermo Control Pro 2 has a German plug! A transition plug is therefore necessary.Two-pole devices can be connected to the controller.

Microprocessor-controlled temperature controller with inversion function for heating / cooling, night reduction of temperature and visual alarm. Night reduction of temperature possible visual alarm Inverting function for heating / cooling Activity indicator equipped with LED light high accuracy and easy to use robust Temperature sensor interchangeable 3m sensor cable easy to handle The temperature controller is equipped with an LED light for the activity display of connected heating or cooling units. When switching to the programming mode, the external device slot is switched off for safety reasons. To protect electronic components, a delay of 60 seconds is set between 2 switching states before the slot is reactivated. Short or short circuit of the temperature sensors are indicated as errors. The temperature sensor is equipped with a USB connector for defect replacement.

Combometer - Digital Thermo-Hygrometer with remote sensor The Exo Terra Digital Thermo-Hygrometer is a 2-in-1 precision instrument, equipped with a remote combined sensor for accurate temperature and humidity indication. This precision instrument has a programmable minimum/maximum memory setting which can be controlled with a single button. Durable and easy to use, the Exo Terra Digital Thermo- Hygrometer can be installed with hook & loop fastener (included), or by simply sliding it into position on top of the Exo Terra Compact Top or Linear Fluorescent Top. Accurate temperature and humidity indication Single button operated Combined remote sensor for temperature and humidity Minimum / Maximum memory Fits the Exo Terra Compact Top and Linear Fluorescent Top Canopies