Nano Catappa Bark - Tropical almond tree bark

ARKA carbon filter for 190/380lARKA myAQUA® carbon filter safely and effectively removes chlorine, herbicides, pesticides and drug residues and is ideal for use with many commercially available osmosis systems, such as our ARKA myAQUA® 190 & ARKA myAQUA® 380. ARKA myAQUA® carbon filter contains high-quality activated carbon for optimum results and clean water.

ARKA Membranes 190/380ARKA myAQUA® Membrane 190 safely and effectively removes up to 99 % of pollutants, salts, pesticides, heavy metals and bacteria and is suitable for use with our osmosis system ARKA myAQUA® 190 or ARKA myAQUA® 380. ARKA myAQUA® Membrane 190 consists of a multi-layer polymer film which achieves a very high retention rate thanks to its very fine pores (0.0001 microns).

Arka osmosis system Suitable for freshwater and saltwater aquariums The ARKA reverse osmosis system offers a powerful, chemical-free and electricity-independent solution for water treatment. Using the power of water pressure, it effectively filters 99% of salts, bacteria and harmful substances such as nitrite, phosphate and heavy metals from conventional tap water. The water purified in this way creates a safe and pleasant environment for marine and freshwater inhabitants, without the need for electricity or chemical additives. Its operating principle is based solely on water pressure and natural filter materials. The multi-layer polymer film with extremely fine pores (0.0001 micron) ensures a high retention rate.Technical details:Filter capacity: Up to 190 liters or 380 liters per dayOsmosis water to residual water ratio: 1:3 - 4Operating pressure: 3 to 8 barTemperature: 1 to 30 degrees CelsiusSalt retention capacity: TFM polyamide - polysulfoneThe system components, including the carbon and fine filters (cartridge) and the membrane filter, require regular replacement intervals:Membrane filter: Replacement every 24 months after commissioningCarbon filter: Maximum capacity of 5,500 liters or replacement every 6 months after commissioningFine filter: Maximum capacity of 11,000 liters or replacement every 3 months after commissioning.

Microbelift Artemiss - freshwater and saltwater100% natural liquid for the treatment of bacterial diseases in fish.Provides a chemical-free treatment that fights bacterial diseases such asBbacterial dropsyswollen eyesfungusulcersmilky skinmouth rotFin/tail rotDamaged scalescan help.MICROBE-LIFT/Artemiss is a unique, herbal, immunostimulant that can reduce bacterial and fungal infections in fish. It helps to strengthen the fish's natural immune system without the risk of resistance that can occur with the use of antibiotics. In addition, Microbe-Lift Artemiss can help expel pathogenic bacteria from the fish that will eventually die without a host.Stimulates and accelerates the regeneration of damaged tissue until there is no trace of the wound left. CautionsDo not use with other medications or treatments. Do not use with algaecides or copper-based products. Avoid contact with the eyes. In case of contact, rinse eyes thoroughly with cold water. Keep out of the reach of children This product is intended for all ornamental and aquarium fish only and must not be used for fish intended for human consumption.Contents: 118ml

Herbatana from Microbe-Lift - 118mlCare preparation based on herbs, can help with parasitic diseasesSupports fish, without disturbing the biological balance of the aquariumHarmless for all marine and freshwater fish as well as lower animals, corals and plants100% natural care product for parasitic diseases. Provides a chemical-free treatment that fights parasitic diseases such asWhite Spot (Me) Costia Platworms (gills and skin) TrichodinaChilodonellaOodinium.MICROBE-LIFT/Herbtana is a unique, herbal, immunostimulant for freshwater and marine inhabitants. Parasitic infections can be recognized by symptoms such as milky skin, blinking and heavy breathing. Parasites are usually always present in very small quantities in most fish. They are naturally fought off by the fish's immune system. When stress levels rise, the immune system's ability to do its job of natural parasite control is directly impaired. This inadequate response allows the parasites to multiply and cause the serious health problems of the host fish mentioned above. MICROBE-LIFT/Herbtana supports the immune system of the fish and expels the excess parasites. Since they cannot return to the fish during treatment, most parasites starve to death without a host.MICROBE-LIFT/Herbtana is safe for all aquatic life. It is an excellent aid for acclimating new fish.PrecautionsDo not use with other medications or treatments. Do not use with algaecides or copper-based products. Avoid contact with eyes. In case of contact, rinse eyes thoroughly with cold water. Keep out of the reach of children. This product is intended for all ornamental and aquarium fish only and must not be used on fish intended for human consumption.

Bio-Exit SilicateBio-Exit Silicate binds excess silicate in the water, so that their aquarium without unsightly brown coatings on gravel & plants, can shine.Silicates occur in tap water or are released from the soil. Silicates can promote the growth of diatoms (diatoms), which can form a brown coating on plants and soil. Diatoms are not toxic or harmful, but the appearance suffers from the algae.Tip: Should you do a silicate test again after administering Bio-Exit Silicate, the value will still be displayed - this because the Bio-Exit Silicate binds and converts the silicate and does not neutralize it.Dosage. 10 ml per 20 liters on day 1 and on day 3. No water changes within 7 days after the first dose.

JBL Pro Clean BAC Cleaning bacteria that instantly clean your aquarium. A cartridge filled with cleaning bacteria that will keep your aquarium clean and your fish healthy. These bacteria are among one of the good bacteria that transform toxins into harmless ones. Various JBL bacteria products contain high concentrations of certain strains of bacteria that, for example, convert problematic nitrogen compounds such as ammonium (NH4), ammonia (NH3) and nitrite into harmless nitrogen compounds (nitrate (NO3) or nitrogen gas (N2)). You also don't need to worry about overdosing the Pro Clean BAC because the bacteria will extract your nutrients from these nitrogen compounds and if they don't eat enough, these bacteria will die. Helps keep the aquarium cleanBefore use, shake the cartridge and empty the entire contents into the aquariumSupports the filter, breaks down pollutants and cleans the bottomBest used after a water change, adding a new fish or cleaning the filter

SuperFish Digi Test EC-TDS3-in-1 TDS meter with plug&play function. High performance and fast test results.SuperFish Digi Test EC-TDS. Accurate 3-in-1 TDS meter for. Aquarium and pond water.Measures 3 different values: conductivity (EC), total dissolved solids (TDS) and. Temperature in Celsius (°C) and Fahrenheit (°F).Calibration is not required.The meter has an automatic Temperature compensation function.Automatic shutdown after 5 minutes. UseRemove the protective cap before use.Press the on/off button.Submerge the EC-TDS meter up to the Immersion line into the water. The meter is NOT waterproof, never submerge it beyond the immersion line into the water.The test results are saved automatically after 5-10 Seconds automatically saved. To achieve a better temperature measurement, press CLEAR and repeat the Test. The test results can also be stored by Pressing HOLD to save.Take the meter out of the water, to read the test results.Press the MODE button to toggle between the test modes (ppm, μS/cm, °C and °F).Pressing the CLEAR button will clear the test results are cleared for a new measurement.Wait 30 seconds before starting a new start a new measurement.Wipe the electrode clean, switch off the turn off the meter and replace the protective protective cap back on.Avoid heat and direct sunlight.Care : Keep the electrodes clean and dry. Always close the meter with the protective cap. Please note!  The color change of the display (green/red) has no meaning..

SuperFish Digi Test pHDigital ph meter for aquariums and pond water. This digital meter measures ph with an accuracy of up to 0.02 units, has an automatic calibration function and makes measuring ph much easier.Accurate pH meter for aquariums and. pond water.Measures pH from 0 to 14 with an accuracy of up to 0.02 units.The device features an automatic calibration function for 1-point (6.86) and 2-point calibration (4.00 - 9.18).Calibration powder is included.Automatic power off after 5 minutes.UseRemove the protective cap before use.Press the power button. Submerge the pH meter up to the Immersion line into the water. The meter is NOT waterproof, never immerse the Never immerse the meter beyond the immersion line. beyond the immersion line into the water.Wait about 30 seconds until the reading is numerically constant.Read the pH of the water.Rinse the electrode with distilled water. rinse, dry with a cloth and put the protective cap.Avoid heat and direct sunlight. 1-point calibration 6.68 The calibration accuracy is ± 0.1 pHDissolve the pH 6.86 buffer powder in a beaker with 250 ml of distilled 25°C warm water.Dip the pH measuring instrument into the water with the pH 6.86 solution and wait about 30 seconds.Press and hold the CAL button for 5 seconds.The display will begin to flash 6.86. When it stops flashing, the pH meter has been calibrated.Rinse the electrode with distilled water. rinse with distilled water, dry with a cloth and put the Put on the protective cap. 2-point calibration 4.00 and 9.18 The calibration accuracy is ± 0.02 pHDissolve the pH 4.00 buffer powder in a beaker with 250 ml of distilled 25°C warm water. Dissolve the buffer powder pH 9.18 in another beaker.Dip the pH meter into the water with the pH 4.00 solution and wait about 30 seconds.Press and hold the CAL button for 5 seconds.The display will begin to flash 6.86.Press the CAL button briefly immediately.The display will flash 4.00. Wait until the flashing stops.Rinse the electrode with distilled water. water.Now immerse the pH meter in the Water with the pH 9.18 solution and wait about 30 seconds.Press and hold the CAL button for 5 seconds.On the display begins to flash 6.86.Press the CAL button immediately briefly.On the display flashes 4.00. Press the CAL button again immediately.On the display now flashes 9.18. If it stops stops flashing, the pH meter is calibrated.The electrode with distilled water Rinse with distilled water, dry with a cloth and put the protective cap on.Care: Keep the electrode clean and dry. Always close the meter with the protective cap. Warranty 1 year manufacturer's warranty. Damage due to improper use (battery leakage, water damage) is not covered. Lift the proof of purchase for proof of warranty. for proof of warranty. The warranty will be voided without proof of purchase! The batteries supplied free of charge have a life of one year. If they are empty at the time of the empty, you must replace them yourself. replace them yourself.

PROCRISTAL UV-CCrystal clear and healthy waterPoor lighting conditions, over-fertilization or even an excess of nutrients can have a negative effect on aquarium water and promote algae. Suspended algae lead to green turbidity, bacteria to whitish turbidity. The JBL Water Clarifier removes turbidity caused by bacteria and suspended algae. The aquarium water is passed through the stable, UV-resistant housing of the clarifier. The UV-C radiation kills the bacteria, other germs and suspended algae in the water flowing through. The efficiency of this UV-C water clarifier is particularly high because the glass bulb is surrounded by a polished, reflective stainless steel foil that reflects the UV-C radiation, thus doubling the efficiency. This can also have a positive effect on the elimination of sessile algae, such as filamentous algae, as their spores are also largely killed.No harmful side effectsNo change in water values / no negative effects on important cleaning bacteria in the filter.Easy installationConnect the water clarifier to the external filter or a separate water pump. Due to included 90° angle, any desired installation position can be achieved.SafetyThe JBL UV-C water clarifier is TÜV-tested and has a safety switch for automatic shutdown when the device is opened. The housing is UV-resistant and sturdy walls and has an LED lamp that indicates whether the UV-C burner is working .Difference from the previous model JBL ProCristal UV-C Compact:The function indicator lights are now located on the flat side of the electrical unit and the microswitch for automatic shutdown of the burner when the housing is opened (if the plug has not been pulled out) is changed to a magnetic safety switch. As a result, the electrical units of the previous models (Compact) do NOT fit the new ones (Compact Plus) and vice versa. Crystal clear and healthy water: 36 W UV-C water clarifier for fast and efficient removal of greenish and whitish turbidity in freshwater and saltwater aquariums as well as garden ponds.Space-saving installation: connection to external filter or separate pump. Inlet/outlet opening mounted in a practical way. Shortest installation length: 61 cmPartial disinfection up to 3000 litres aquarium (pump max. 1000 l/h) /30,000 l pond (pump max. 4000 l/h), against floating algae up to 800 l in aquarium (pump max. 1000 l/h) /up to 8000 l pond (pump max. 4000 l/h)TÜV tested, safety switch: automatic switch-off of the UV-C burner when the unit is opened. Sturdy, UV-resistant housing, 2-glass constructionScope of delivery: Complete UV-C unit, 5 m cable, UV-C burner 36 W, base: 2G11, wall bracket, V2A screws, hose connection sleeves for 12 to 40 mm hoses. Warranty: 2 (+2 years if the product is registered)

Söchting Oxydator WThe Söchting Oxydator W produces normal and activated oxygen using a patented process using the Söchting Oxydator solution and special ceramic catalysts. The activated oxygen breaks down toxins and putrefactive substances, thus improving the water quality and contributing to the well-being of fish and plants. The Oxydator W is designed for ponds up to 4000 litres. The catalyst is already included in the delivery. You have to buy the necessary solution. Foreign substances do not get into the solution. In winter it continues to work reliably even under a closed ice cover and brings oxygen down to the bottom where the fish stay over winter. An oxydator works with the oxydator solution as an oxygen carrier and with the catalyst to remove the oxygen. Catalysts last for several years and must first be replaced when their activity decreases significantly. This oxydator releases a total of as much oxygen as 20,000 litres of dissolved water and is sufficient for garden ponds up to approx. 4000 litres. In heavily polluted water or in larger ponds, it also brings about a great improvement in quality, but the dosage may then no longer be sufficient to prevent the occurrence of floating algae in particular. In this case, another device should be used. The higher the water temperature, the higher the oxygen demand of the organisms in your water. This law is followed by the release of oxygen by the oxydator. While one filling lasts 4-5 months in winter, it can be used up after just one warm summer month. When it needs to be refilled, you will see that the oxydator swims up to the water surface on its own. When this happens, wash out the ceramic cup with the solution and check for ice residue if necessary. If you have a strong OXYDATOR solution, first dilute it with distilled water. If the OXYDATOR remains under water for an unusually long time, you should take it out of the pond yourself. For further instructions and start-up, please refer to the instruction manual.    Does not need electricity to run.    Refillable.    Easy to install and maintain.    Produces active oxygen for fish and plants.    4000l pond.If the oxydator is damaged, there is a risk that the H2O2 will leak out and this is toxic to the animals, so check regularly.

Söchting oxidizer DThe Söchting Oxydator D produces normal and activated oxygen in a patented process using the Söchting Oxydator solution and special ceramic catalysts. The activated oxygen breaks down toxins and putrefactive substances, thus improving the water quality and contributing to the well-being of fish and plants. The Oxydator Mini is designed for aquariums up to 100l. The catalyst is already included in the delivery. You have to buy the necessary solution. We recommend that you use the 6% solution for the Oxydator D. If you use a stronger solution, dilute it only with distilled water. Foreign substances must also not be added to the solution. In tanks that have been used for a long time and have a high dirt deposit in the substrate, the Oxydator initially triggers a strong development of carbon dioxide, which will subside again as soon as the activated oxygen has worked off the reducing substances. Until then, please leave the previously used aeration in operation to expel the excess CO₂. In plant-free tanks, the CO₂ must, of course, be permanently expelled.Does not need electricity to run.Refillable.Easy to install and maintain.Produces active oxygen for fish and plants.100 l aquariums.If the oxydator is damaged, there is a risk that the H2O2 will leak and this is toxic to the animals, so check regularly.