JBL Pro Silent Non-return valve

JBL ProHaru universal - Universal adhesive for the aquarium, terrarium and pond. Bonds both in and out of water JBL ProHaru universal is a permanently elastic hardening adhesive and sealant which is polymer-based. It bonds and seals almost all materials to each other, both in and out of water (except PE and PP).JBL ProHaru universal is suitable for the following applications, amongst others: First aid for leaking aquariums, wet areas of terrariums and ponds. After cleaning the site of the leak (removing algae etc.) it can be sealed with JBL ProHaru universal directly underwater. Making aquarium decorations and fixing them in an aquarium. Fixing corals in a marine aquarium. Fixing moss and plants when setting up scapes “dry”. Constructing aquarium components (filter partitions etc.) from a variety of materials e.g. glass and plastic. Constructing a terrarium from a variety of materials e.g. wood, glass, aluminium, plastic etc. JBL ProHaru universal is ready to use: 80 ml tube: Open the tube with the pin located in the lid, screw on the dosage nozzle and cut to the required length. Squeeze the end of the tube to release contents. The area to be bonded must be clean and free of dust or grease. If used underwater, the area must be free of any coating such as biofilm, algae etc. For large areas, the adhesive needs to be applied in several parallel strips. When used underwater, bonding strength may be lessthan on dry surfaces. Hardening occurs as a result of humidity at room temperature. JBL ProHaru universal gradually hardens from the outside to the inside. At low temperatures and/or low humidity, the hardening process takes considerably longer. Once opened, packs harden gradually and should therefore be tightly closed after use and used within a few weeks.  

JUWEL EccoSkim is the compact and energy-saving surface skimmer for all aquariums infinitely variable up to 300l/h works with an independent pump (4 Watt) conducts the residues on the surface directly into the Juwel internal filter increases the oxygen saturation in the water removes the mold skin on the water surface Thanks to the matching suction mount, the EccoSkim is also suitable for use in all common glass aquariums Size: 8 × 3,5 × 17,5 cm Assembly in a jewel aquarium: The JUWEL EccoSkim can be installed in all JUWEL aquariums of the models Rio, Lido, Vision, Trigon and Primo 110. Assemble the JUWEL EccoSkim according to instructions. Hang the JUWEL EccoSkim in the slots of the JUWEL filter system Fully open the flow control tube. Connect the pump to the mains.

Eriocaulon CinereumEriocaulon Cinereum is a very interesting and eye-catching plant species for the foreground of an aquarium. The plant is characterized by slow growth and the shape of the leaves resembles needles.Cultivation difficulty: moderately demanding Light requirement: high CO₂ requirement: high Height of the adult plant: up to 5 cm Growth: slow Temperature: 19-29 °C Placement in aquarium: in the foreground Origin: Asia 6 cm cup diameter Eriocaulon Cinereum is an undersized plant that does well in the foreground of an aquarium. This species is found on the Asian continent, especially in countries such as China and the Himalayan region. In China it is very common in its natural habitat, but in other countries it is hard to find. Recently, it has gained popularity due to its original and unique structure and characteristic flowers.The plant is characterized by very slow growth, as it takes about 6 months to form a rosette with a diameter of 10 cm. It reaches an average height of 5 cm. There must be a very fertile substrate, as the species has a very extensive root system. Through this, the plant absorbs most of the nutrients it needs for growth. It tolerates a wide range of water temperatures from 19 to 29 °C. It also grows in water with medium to high hardness,but prefers soft water. To ensure good growth, strong lighting and CO₂ dosage is essential, as well as micronutrient fertilization. Under these conditions, it will reward us with a beautiful rosette appearance with many young leaves.The propagation of this plant can be done in several ways. The easiest and most popular is the division of the rosette. This can be done as early as about a month after planting the plant in the aquarium. To get new cuttings, pull out a single plant and remove it from the water. Use a sharp tool to carefully cut the rosette into smaller pieces, and then use tweezers to place them in the substrate. After some time, the cut should be covered with new leaves, and the plant will take on a spherical shape.In aquariums, it likes to bloom, so its original inflorescences make an unusual decoration for any aquarium. Planting: The plant must be removed from the cup and thoroughly rinsed from the gel under running water. This is best done by placing the plant in a container of lukewarm water. Most of the gel will then fall off by itself.

Metal Air Valve 4 outputsMade by copper electroplating process, rust-resistance.Can be hanged aside on the fish tank.Provide several flow outputs from a single input.Each output can be adjusted respectively.If the flow input is strong enough, the Metal Air Valve can be connected with more outputs.

Juwel Carbax - Aktivkohle-Filter Das Filtermedium Carbax setzt neue Massstäbe in der Aquarienfilterung mit Aktivkohle. Carbax ist eine hochwirksame, steinkohlebasierte Kornaktivkohle, die speziell für die Reinigung und Entfärbung wasserbasierter Flüssigkeiten entwickelt wurde. Anders als bei gängigen Kohlefiltermedien, wird bei Carbax das gesamte Aktivkohlekorn vollständig aktiviert und nicht nur die Kornoberfläche. Somit bindet Carbax Verfärbungen, Geruchsstoffe und toxische Substanzen besonders langanhaltend und schnell und sorgt für kristallklares Wasser in Ihrem Aquarium. Absorbiert Geruchs- und Trübstoffe sowie toxische Verbindungen Sorgt für kristallklares Wasser Herausfiltern von Medikamentenresten Für Süss- und Meerwasser geeignet

Limnophila aromaticaLimnophila Aromatica (fragrant limnophilia) is a beautiful plant for the second or third level. It turns purple under intense light.Difficulty of cultivation: moderate Light requirement: medium CO₂ requirement: medium Adult plant height: up to 50 cm Growth: moderate Temperature: 22-28°C Placement in aquarium: second or third level Origin: Asia Cup diameter: 6 cm Limnophila Aromatica (fragrant Limnophila, rice paddy weed) is a plant that has earned a place in aquariums around the world due to its unique appearance and leaf color. It is native to Asia, where it usually grows in rice paddies or swamps near water. It does well after the end of the rainy season in a dry place in a still moist, sandy soil. At high temperatures, the plant flowers, forms fruit, and then dies. Traditionally used as a spice, especially in Vietnamese cuisine. Its flavor is reminiscent of cumin and lemon. Currently, the plant can also be found in America and Australia.Limnophilia Aromatica is a stalk plant that produces lance-shaped leaves with serrated edges. Their color depends on the intensity of light. If the plant has little access to light, its leaves are green. If the light is strong, the entire top of the plant is intense red and the leaves are purple on the underside. In aquariums, plant it in the second or third level, leaving a distance of 1.5 cm between cuttings. It grows quite fast, its optimal pH is 6-7. It tolerates temperatures between 15 and 30 °C, but it is better to avoid extreme temperatures and keep it between 22 and 28 °C. In aquariums it is propagated by cutting and planting young plants that form on the stems or from the tips. The plant does not require absolute CO₂ fertilization, but grows much faster with CO₂ addition. To achieve the desired intense red-purple color of the leaves, the plant must be strongly illuminated. In addition, attention must be paid to the correct water parameters in the aquarium, especially the optimal iron, nitrate and phosphate content, so that the plant can absorb the nutrients from the water column. Due to its strongly developed root system, the plant grows best in active media.Planting: The plant must be removed from the cup and thoroughly rinsed from the gel under running water. This is best done by placing the plant in a container of lukewarm water. Most of the gel will then fall off by itself. Divide the contents of the cup into 1-2 cm lumps and then set them at intervals of 1 to 2 cm.