A kit to hang up JBL LEDs. It includes 2 screws and dowels as well as two 150 cm stainless stell threads to easily hang your LEDs.
For hanging a JBL LED SOLAR lamp (natural or effect) from the ceiling
Attach the stainless-steel cable to the designated point on the JBL LED SOLAR lamp, fasten the special brackets to the ceiling and hang down to the desired length.
Shapely (rustproof) stainless-steel cables, each 150 cm long, can be shortened
Easy to install in just a few minutes by simply attaching to the luminaire and to the ceiling with special cable holders
Scope of delivery: 2 dowels & 2 screws with 2 special sockets (for ceiling), 2x 150 cm stainless-steel cable
Composition
Feeding recommendation
Technical details
Size information
0 of 0 reviews
Leave a review!
Share your experiences with other customers.
Login
No reviews found. Be the first to share your insights.
JBL LED special light Solar Effect
LED effect light as a supplement to the JBL LED Solar NatureIf you want to set special lighting effects such as colored light, red sunrise and sunset, deep blue water or Gwiter in addition to your existing light, you need a second light, called JBL Solar Effect.The LED light can be connected to the main light via the supplied cable divider. With the remote control included in the JBL LED Solar Natur you can now control the individual color channels (red / green / blue).For the control of the effects (biotopes, thunderstorms, clouds, rain, etc.) they need the special controller JBL LED Solar Control WiFi, which they can then control easily and simply via their mobile phone.
Special luminaire with RGB LEDs to create color effects, usually as a replacement for second, colored tube (T5 or T8)
Simply connect to the existing JBL LED Solar Naur with the included cable divider and control it via its remote control
Enables colorfully dramatic simulations of sunrises and sunsets as well as weather simulations such as thunderstorms and rainy seasons
The built-in RGB LEDs can produce red, green and blue as well as all mixed colors, individually selectable via the remote control of the JBL LED Solar Nature
Dimmable in 7 steps
Extendable effects with JBL LED Solar Control WiFi control via mobile phone
Contains: waterproof LED effect luminaire (IP67), cable switch, ride-on mounting bracket and end caps for mounting in tube sockets (T5 and T8)
Article No. Mass WattCO-JB61911.00 438mm 8WCO-JB61912.00 549mm 9WCO-JB61913.00 742mm 13WCO-JB61914.00 849mm 15WCO-JB61915.00 1047mm 16WCO-JB61916.00 1149mm 19WCO-JB61917.00 1449mm 20W
JBL LED SOLAR NATURE
High performance LED light for freshwater aquariumsA perfect light for your fish, invertebrates and aquarium plants, because the warm white and cold white LEDs are evenly distributed in the light panel.
Maximum light efficiency for beautiful aquatic plants: extremely high photosynthetically active radiation (PAR) of more than 220 µM/s/m2
Plug & play: clip light in tube holder or set it up, connect cable, switch on or dim via remote control and select one of 3 light colours
Evenly distributed warm white and cool white LEDs for a biotope-compatible light climate, 2 channels with 3 preset light colours: 2700 K (warm white), 4000 K (daylight white), 6700 K (cool white)
Expandable through WiFi control via smartphone with preset biotope-compatible or individual light controls and the JBL LED SOLAR EFFECT RGB light for special colour effects
Incl. water-protected light (IP67), remote control, driver (receiver), power supply unit, connection cable, holding brackets for top assembly and end caps for the installation in tube sockets (T5 & T8)
Because LEDs have only really become more energy-saving than fluorescent tubes recently, there has generally been no technology and no demand (!) to optimise the LED light spectrum for aquarium plants. Up to now LEDs have only been used in the technical sector and in the home. The light spectrum of aquatic plants, however, varies considerably from the spectrum in the home or the LEDs for torches. Here it is a matter of the photosynthetically active radiation range, called PAR (Photosynthetic Active Radiation), and a full spectrum which contains the TOTAL range within the visible light spectrum. Only with those two components could the perfect light for aquarium plants be manufactured!Since JBL was the first manufacturer worldwide to develop a full spectrum modelled on sunlight with its JBL SOLAR fluorescent tubes, our development department didn’t just want to use the available home spectrums for LED aquarium technology, it wanted to create a SOLAR full spectrum, especially for aquariums! This took some time – but now it is available!The very special features of the new JBL LED SOLAR lights:
The JBL LED SOLAR Lamps are suitable as replacements for ALL fluorescent tube lengths
together with the light the basic equipment JBL SOLAR Natur contains a remote control unit for simple and professional control
The JBL LED lights have a full spectrum and are plant-optimised due to their high PAR values (photosynthetically active radiation). That is an achievement of our JBL research!
Convenient holders enable installation in existing T5 and T8 tube end caps, plug-on holders, made of stainless steel, are of course also included.
Also compatible with a light computer which can be steered by mobile phone. This enables light values for various biotopes, incl. rainy season, clouds and thunderstorm
Includes a special program to accustom plants to the strong LED lighting
Article No. Mass WattCO-JB61902.00 438mm 22WCO-JB61903.00 549mm 24WCO-JB61904.00 742mm 37WCO-JB61905.00 849mm 44WCO-JB61906.00 1047mm 57WCO-JB61907.00 1149mm 59WCO-JB61908.00 1449mm 68WThe JBL LED Solar Controll Wifi and the LED Solar Effect can be combined with the LED Nature
Sera LED AdapterFor easy mounting of the sera LED X-Change Tubes in T5 and T8 tubesMost of the time. The lengths of the fluorescent tubes vary from supplier to supplier,
minimal. With rigid connections, it can then also here to problems
come. For such problems, there is the sera adapter. The
fluorescent tubes are not simply firmly connected to the adapter, but simply plugged into it. This has the advantage that
the tube can still be moved. This leeway, which you
thereby leave, allows you a flexible mounting on your aquarium. Easy and flexible mountingOptimal setup of your aquariumSuitable for all T8 fluorescent tubes
Sera LED Adapter For easy mounting of sera LED X-Change Tubes Mostly the lengths of the fluorescent tubes vary minimally from supplier to supplier. With rigid connections, problems can then also occur here. For such problems, there is the sera adapter. The fluorescent tubes are not simply firmly connected to the adapter, but simply plugged in. This has the advantage that the tube can still be moved. This leeway, which you leave yourself, allows you a flexible installation on your aquarium. Easy and flexible mountingOptimal setup of your aquarium.
sera LED adapter short
For easy mounting of sera LED X-Change Tubes in T5 and T8 tubes.
Mostly. Vary from supplier to supplier, the lengths of the fluorescent tubes
minimal. With rigid connections, it can then also here to problems
come. For such problems, there is the sera adapter. The
fluorescent tubes are not simply firmly connected to the adapter, but simply plugged in. This has the advantage that
the tube can still be moved. This leeway, which you
thereby leave, allows you a flexible mounting on your aquarium. Easy and flexible mountingOptimal setup of your aquariumSuitable for 549mm, 849mm, 1149mm tubes
Sera Tube Holder Clear 2 pcsClear acrylic tube holder for Sera LED tubes.The holder allows you to hang the light as you wish. The bracket is made of a solid acrylic and its simple design ensures that the aquarium is still the main focus. Adjustable up to 13 mm.
For hanging Sera LED tubesFixed acrylic glass
Sera LED extension cableExtension cable for the Sera LED series. It may happen that when you connect your Sera LED, you noticed that your cables are not long enough. For such cases, there is the Sera extension cable. The cable 1.2 m long and can make your life much easier.1.2 m cable.
To connect to Sera cable connections
Sera ballastFor powering the Sera LED Tubes.The Sera Driver is necessary for powering the Led Sera Tubes. However, it does not only output current, but can supply multiple tubes with a Triple Cable. The current capacity is optimally utilized thanks to the Driver. The device is necessary for a power supply of the Sera TubesRegulates the power supply if multiple tubes are connected. The recommendation for wattage distribution is as follows: Max. Consumption < 20 watts sera LED ballast 20 V DC 1 A Consumption < 60 watts sera LED ballast 20 V DC 3 A
LED Triple CableA triple power distributor for Sera LED Tubes.The Sera Triple Cable, together with a Sera Driver, can give power to three different lamps or dimmers. The distributor gives the optimal amount of power for each lamp connected.
Sera LED Digital DimmerWith the Digital Dimmer, you can control your Sera LED lamps. The dimmer makes it possible for you to change the brightness and light intensity in the aquarium. This means you can always adjust the brightness to your fish inhabitants. The dimmer can also be programmed to turn the light on and off, as well as the whether the lighting slowly increases or decreases. In combination with a LED Sunrise Tube Change and the adjustable time, you can achieve perfect a sunrise and sunset. For an even greater natural feeling you can also determine the cloud situation.Compatible with all Sera LED productsSimulate natural weather
Ultra seal fluorescent lighting controller
A controller for lighting tubes. Comes with waterproof ultra seal lamp leads, universal mounting brackets and starter.
JBL LED Solar Control
With the remote control included in the JBL LED SOLAR Natur you have the possibility to gradually dim the light and choose from three color temperatures.As soon as you complete your JBL LED SOLAR Natur (ideally in combination with JBL LED SOLAR Effect) with the JBL LED SOLAR WiFi Control, a new world of control opens up for you:With the help of the JBL LED SOLAR WiFi Control you can download biotope data from the Pantanal (southwestern Brazil) or from the region of the East African Grabenbruch lakes (Malawi-Tanganyika). Your LEDs will then adjust the local climate situations depending on the season (including dry and rainy seasons, thunderstorms & cloud cover).For a goldfish aquarium, the lighting will emphasize the beautiful colors and a company aquarium will set a light that will show a 10-day sun day, the right light for plants and strong colors for the fish. Thunderstorms and clouds are recorded by a random generator.For friends of aquariums (aquascaping) there is a light program similar to the program for community aquariums, but with higher light intensity.With each program, the acclimatization mode can be chosen initially, making it easy for your plants to adapt to the much brighter light from the previous fluorescent light fixtures without causing problems. Of course, any program can be chosen without acclimation.You can also set self-selected lighting situations in a manual mode.For all the mentioned programs you have 2 LED lamp types available: 1.) JBL LED SOLAR nature and 2.) JBL LED SOLAR Effect. If you only operate the JBL LED SOLAR Nature without the JBL LED SOLAR Effect with the JBL LED SOLAR WiFi Control, you can achieve all functions such as thunderstorms, clouds as well as sunrise or sunset, but without colored effects!
For the control of JBL LED SOLAR Nature individually or in combination with JBL LED SOLAR Effect. Control biotope data, effects, thunderstorms, sunrise and sunset via WiFi from your mobile phone
Easy to use: replace existing IR receiver with JBL WiFi Control and control desired effects via app
5 programs available + additional program for manual input (biotope South America & Africa, aquascaping plants, goldfish, community aquarium, any program with acclimatization)
Biotope data includes dry and rainy season, cloud cover, thunderstorms and sunrise and sunset
Scope of supply: WiFi control unit for insertion into the JBL LED SOLAR system for 2 lights, required app is always free
HeliaLux Spectrum Splitter
Suitable adapter for operating two HeliaLux insert lights on the HeliaLux SmartControl.
With the HeliaLux splitters, you operate two HeliaLux insert lights on the HeliaLux SmartControl. The watertight safety closures meet the highest demands in terms of safety. Thanks to the user-friendly plug-in device, the installation between the light and the controller is easy and understandable.
HeliaLux SmartControl + HeliaLux Spectrum Splitter + 2x HeliaLux Spectrum (4 colors)
CHF45.00
❅
❆
❅
❆
❅
❆
❅
❆
❅
❆
❅
❆
Foundation Modal
This Modal is powered by moori Foundation
This website uses cookies to ensure the best experience possible. More information...