JBL Fixol aquarium back wall adhesive for attaching foil backgrounds outside the aquarium
Bubble-free attachment of foil backgrounds up to a size of 200x80 cm to the outside of aquariums and terrariums.
Fixol is the only way to make 3D backgrounds look three-dimensional.
Adhesive can be removed at any time without leaving any residue. Includes spatula for easy application.
Application: Cut the foil back wall one cm smaller all round than the aquarium or terrarium back wall. Place the aquarium/terrarium with the front pane on a sufficiently stable surface. Place a protective cap of JBL Fixol approximately in the middle of the rear pane. Place the cut film back panel on top and smooth out from the center outwards without bubbles using the enclosed scraper. Wipe off excess adhesive with a cloth or kitchen towel. Fix the back panel all around with transparent adhesive tape.
Dennerle - Nano Gravel Cleaner
For all aquaria from 10 to 40 litres
Integrated pump for simple suction Slimline suction pipe - ideal for aquaria with plants With practical hose holder and flow regulator
Lava for aquariums and terrariums
Very light lava rock is ideal for designing aquariums and terrariums, preferably in the dark color spectra.The lava rock must be rinsed with running water before use in the aquarium so that the top layer of rock does not leave an unnecessary amount of dust in the aquarium and pollute the filter system.The colors of the lava can vary from red to black, as it is a natural product.S = approx. 10 - 15 cm
M = approx. 15-20 cm
Salvinia auriculataSalvinia Auriculata (Brazilian salvinia) is a floating plant native to South America. It grows moderately quickly so that its population can be controlled. Easy to grow. Absorbs nitrogen to combat algae. Propagates by spreading.Difficulty of cultivation: easy to mediumLight requirement: medium to highCO₂ requirement: lowHeight of the adult plant: 0.5 cmGrowth: moderate to fastTemperature: 22 - 24°CPlacement in the aquarium: SurfaceOrigin: South and Central AmericaCup diameter 6 cmSalvinia Auriculata (Brazilian Salvinia) is a floating ornamental plant. It is native to the calm, still waters of South and Central America. It can be found from Paraguay to Cuba. It owes its popularity above all to its original appearance. Its small oval leaves with a diameter of 10 mm cm are arranged opposite each other on an elongated leaf stalk. These leaves are covered with fine hairs that trap air bubbles, allowing them to float. Depending on the light intensity, they are wavy or flat. Salvinia forms a third type of underwater leaves on which the spores are deposited.Like all floating plants, Salvinia is recommended for shady waters . Its great appetite for nitrogen and phosphorus compounds makes this plant a good ally in the fight against algae.
Salvinia has low light and nutrient requirements. It grows well in both moderate and strong light. As a floating plant, it does not require a substrate but draws all the necessary nutrients directly from the water. During the vegetation period, it reproduces by spreading, whereby the growth rate is moderate. This makes it easy to control its growth and remove excess plants. It grows to a length of 3-6 cm and likes warm, humid air, so it is advisable to use a glass or cover when growing it.It should be placed in such a way that no condensation falls on the plants. It adapts very quickly to the new parameters. However, it should be borne in mind that it will die if there is too little light. It thrives best in soft to medium-hard water at 22-24°C.
The in vitro culture of plants is carried out in tissue culture laboratories. Thanks to the sterile production conditions, the cuttings are free from snails, algae or pathogens.Planting:The plant must be removed from the cup and thoroughly rinsed of the gel under running water. This is best done by placing the plant in a container of lukewarm water. Most of the gel will then fall off by itself. Place the plant on the surface of the water.
Size (1):
S = approx. 40-50cm
|
Size (4):
S = approx. 40-50cm
Amtra Dragon Root for aquariums and terrariumsThe high-quality Dragon roots are suitable for terrariums and aquariums. With the Amtra Dragon root, you can enhance not only your terrarium or aquarium, but also the environment for the animals living in it. The Dragon root offers your pet optimal protection. You can also anchor plants or other objects in the root, giving your pet even more opportunities to build a shelter.
Natural wood root
creates a natural environment
Aquascaping - for planting with anubias or moss
serves as a hiding place or resting place for lizards and snakes
Very finely branched and a beautiful eye-catcher
The root in the picture serves as an example - this is a natural product and each piece is unique and looks different!The colour and shape of the root differs from the picture!Sizes:S = approx. 30 cm to 50 cm M = approx. 70 cm to 90 cm L = approx. 90 cm to 110 cm
JBL Fixol aquarium back wall adhesive for attaching foil backgrounds outside the aquarium
Bubble-free attachment of foil backgrounds up to a size of 200x80 cm to the outside of aquariums and terrariums.
Fixol is the only way to make 3D backgrounds look three-dimensional.
Adhesive can be removed at any time without leaving any residue. Includes spatula for easy application.
Application: Cut the foil back wall one cm smaller all round than the aquarium or terrarium back wall. Place the aquarium/terrarium with the front pane on a sufficiently stable surface. Place a protective cap of JBL Fixol approximately in the middle of the rear pane. Place the cut film back panel on top and smooth out from the center outwards without bubbles using the enclosed scraper. Wipe off excess adhesive with a cloth or kitchen towel. Fix the back panel all around with transparent adhesive tape.
CN Slimline Rock Colorado 60 × 55 cm – Back panelCeramicNature CN Slimline Rock Colorado 60 × 55 cm is an ultra-flat back panel with a natural rock look for aquariums and terrariums. It is only approx. 15 mm thick, can be extended in a modular fashion and cut to size as required.The CN Slimline Rock Colorado 60 × 55 cm from CeramicNature is a decorative background panel for aquariums and terrariums. The natural rock look adds depth and texture to the setup without taking up much space in the tank. With its slim profile of approx. 15 mm, the background panel is also suitable for narrower tanks or terrariums where the internal space needs to be preserved as much as possible. CeramicNature
The back panel is handcrafted and finished with a robust mineral coating. This surface is resistant to moisture, wear and tear, and temperature fluctuations. This means the Slimline back panel can be used in both aquariums and terrariums.
Thanks to its modular design, several back panels can be joined together seamlessly. If required, the back panel can be cut to size using a metal saw and adapted to the desired dimensions. This makes it ideal for bespoke set-ups, larger tanks or natural-looking back panel designs.Your benefits at a glanceDecorative back panel for aquariums and terrariumsNatural rock lookSlim Slimline profile, approx. 15 mm thickSaves space in the tankHandmadeRobust mineral top layerResistant to moisture and wear and tearSuitable for aquariums and terrariumsNon-toxic and safe for animalsModularly expandableSeveral back panels can be joined seamlesslyCan be cut to size for customisationIdeal for natural-looking set-upsDimensions: 60 × 55 cmAvailable colours: Colorado Brown and Oxford GreyInstructions for useBefore installation, the back panel should be cut to the desired size and rinsed thoroughly. For aquariums, we recommend securing it with suitable aquarium silicone. Ensure that the back panel is securely fitted and that no animals can get behind it. Take care when cutting to size and smooth any cut edges if necessary.Zoo Roco TipThe Slimline back panel is particularly well suited when a natural rock-like appearance is desired, but you want to lose as little swimming or climbing space as possible. Combined with roots, stones, mosses or epiphytes, you can quickly create a harmonious, natural-looking design.
Deco poster stone/plants - in three sizesDecorative backing film for aquariumsWith the DECO POSTER B, you can give your aquarium an attractive and harmonious background design in no time at all. The poster back wall with the stones/plants motif can be used either or. With the stones as a background, your plants are shown to their best advantage. The background with the plants is ideal for aquariums without their own plants and creates an attractive look that stylishly enhances the aquarium and accentuates the underwater world even better.The back panel can be easily cut to the desired size and attached to the aquarium without any complications. This makes it ideal for a quick and flexible design to suit different tank formats.Product advantages at a glance:Decorative poster background for aquariumsTwo pictures stone / plantsEasy to cut to size individuallyQuick and uncomplicated installationIdeal for visually enhancing the aquariumAvailable sizes: S = 60 x 49 cm M = 120 x 61 cmL = 150 x 61 cm
SuperFish Scaping Foam 375 ml - Create natural aquatic landscapesSuperFish Scaping Foam (375 ml) is a high-quality, non-toxic polyurethane foam, specially developed for creative design in aquariums, paludariums and terrariums.
This robust PUR foam is ideal for building waterfalls, streams or for modeling 3D back walls.The foam dries out in a dark color and therefore blends in particularly naturally with its surroundings - perfect for naturalistic designs.Properties at a glance:Content: 375 mlNon-toxic & safe for animals and plantsIdeal for aquariums, paludariums & terrariumsPerfect for waterfalls, streams and back wallsDries dark for a natural appearanceResistant & dimensionally stable after curingCreate individual waterscapes and unique backgrounds with SuperFish Scaping Foam - easy to use, durable and absolutely safe for your animals.
Milk glass aquarium filmThe HOBBY Frosty self-adhesive photo back wall is particularly easy to apply from the outside and requires no additional adhesive. It transforms a normal, glossy back wall of the aquarium into a frosted glass pane, where especially the plants scapter aquariums come into their own. The robust and self-adhesive film for your aquarium is dirt & water-repellent and can be removed again without residue if necessary. Your fish will feel visibly more comfortable.Available sizes:60 x 30 cm100 x 50 cm120 x 50 cm
Back wall film 150 x 60A modern back wall foil with realistic designThis poster is printed on both sides and offers with appealing
Motifs a simple and very effective back wall design for your
Aquarium. On the front a beautiful underwater landscape and on the back of a rock motif.The water-resistant film is simply attached behind your aquarium. To achieve a particularly plastic
and bright effect, we recommend fixing with Juwel
Poster Fix, this must be purchased separately.Water insensitiveTwo-sidedCreates a realistic image of the aquarium.
Photo back wall 100×50 cm
This poster is printed on both sides and offers a simple and very effective back wall design for your aquarium with appealing motifs. A beautiful underwater landscape on the front and a rock motif on the back.The water-resistant film is simply attached behind your aquarium. To achieve a particularly vivid and bright effect, we recommend fixing it with Juwel Poster Fix, which must be purchased separately.for aquariums from 80 × 50 cm to 100 × 50 cmWater-resistantTwo-sidedCreates a realistic image of the aquarium.Dimension 100 × 50 cm
Repty ® flex-MAGIC 4 kg
Applications:Pour la réalisation d’arrières plans muraux, de grottes. A appliquer sur des matériaux telsque bois, liége, polystyrène et autres.Proportions:Environ 2200 ml eau: 4,8 kg pigment.Données techniques à 20°C:Temps de travail: 5 heures. Durée de mise en oeuvre: environ 10 min. Temps dedurcissement: environ 36 heures.Préparation du support:Les supports peuvent être secs ou humides, toutefois ils doivent être solides, capablesde supporter un poids et exempts de tout lubrifiant de moule. Nous recommandons decommencer par appliquer une fine couche de mortier dilué au pinceau pour enduire lesupport et de laisser sécher pendant environ 12 heures à 20°C avant de continuer.Utilisation:Après avoir procédé au mélange, assouplir le mortier en le malaxant une fois encoreavant de l’appliquer. Etalez le mortier sur le support et lissez avec une spatule ou unepetite brosse. Veillez à ce que les couches ne dépassent pas 10 mm d’épaisseur, ce quirisquerait d’empêcher le mortier de durcir correctement.Rincez à fond le matériau durci à l’eau claire avant tout usage.Température de travail:supérieure à +8° C.
Juwel Filter Cover - Stone Granite
555x186/157mm
The Stone Granite filter cover is a highly realistic image of a rock structure in natural, granite tones, which works perfectly with the Stone Granite colour background. The very low installation depth of just 1-1.5 cm disguises your filter perfectly, without taking up too much room.
The filter cover is made of two parts, one for the front and one for the side.
They are compatible with all JUWEL aquariums and the filter sizes they use. It can be very quickly and easily cut to size.
The Stone Granite filter cover is made of a highly condensed polyurethane, and is coated with epoxy resin.
This complex production process makes it especially easy to cut the filter covetous eyes, whilst providing an extremely tough, colourfast surface.
Stone Granite filter covers are the perfect addition to the Stone Granite colour backgrounds.
Double-sided printed photo background for aquariums / terrariums
Plastic film
printed on both sides
various posters
for aquarium or terrarium back walls
Beauty + Sea
Plastic film printed on both sides for attaching to the back of the aquarium, also suitable for terrariums. Beauty + Sea
The Stone Granite colour background is a realistic image of a granite-coloured rock wall.
With its natural granite tones, striking rock structure and distinctive illusion of depth, the Stone Granite colour background is a highly impressive addition to your aquarium.
Easy to cut to size
Easy assembly with JUWEL Conexo
Modular expansion possible
Suitable for use with saltwater aquariums
600 x 550 mm
JBL Fixol aquarium back wall adhesive for attaching foil backgrounds outside the aquarium
Bubble-free attachment of foil backgrounds up to a size of 200x80 cm to the outside of aquariums and terrariums.
Fixol is the only way to make 3D backgrounds look three-dimensional.
Adhesive can be removed at any time without leaving any residue. Includes spatula for easy application.
Application: Cut the foil back wall one cm smaller all round than the aquarium or terrarium back wall. Place the aquarium/terrarium with the front pane on a sufficiently stable surface. Place a protective cap of JBL Fixol approximately in the middle of the rear pane. Place the cut film back panel on top and smooth out from the center outwards without bubbles using the enclosed scraper. Wipe off excess adhesive with a cloth or kitchen towel. Fix the back panel all around with transparent adhesive tape.
Sea&Rock back panel for aquarium / terrarium backs
Photo background printed on both sides for aquarium or terrarium backgrounds
Plastic film
printed on both sides
various posters
for aquarium or terrarium back walls
Sea + Rock
Plastic film printed on both sides for attaching to the back of the aquarium, also suitable for terrariums. Sea + Rock.
CHF 3.90
❅
❆
❅
❆
❅
❆
❅
❆
❅
❆
❅
❆
This website uses cookies to ensure the best experience possible. More information...