JBL Fe Iron Test

Article no: CO-JB24116.00

CHF 27.90

Stock: 1

Available, delivery time: 1-3 days

Delivery between Tuesday, 21 April and Wednesday, 22 April
Variant (2)
product-image
Pick your accessory
from CHF 18.90
Zahlungsarten
Product information "JBL Fe Iron Test"

JBL Iron Test Fe - Quick test to determine the iron content in freshwater/marine water aquariums & ponds

  • Easy and reliable monitoring of the water values of aquariums/ponds.
  • Helps determine the ideal iron content to check the fertilisation for freshwater and marine water
  • Laboratory comparator system to compensate the inherent water colouring: fill plastic cuvette with sample water, add reagents to another cuvette, place cuvettes in holder, read values on colour chart
  • Duration of use: for setting up a new aquarium: 1 x after setting up, afterwards weekly. In case of green algae problems or when plants don’t grow properly.
  • Testing aquarium water for healthy, clear water
  • 1 quick test, Iron Test Fe. Contents for approx. 50 measurements, incl. reagent, 2 glassvials with screw cap, syringe, comparator block and Fe colour scale. Refill reagent available separately

Healthy aquariums with conditions close to nature
The right water values are dependent on the fish stock and the plants inside the aquarium. Even if the water looks clear it can be contaminated. With bad values diseases or algae can appear in the aquarium. To maintain a healthy aquarium with conditions close to nature it is important to check and adapt the water values regularly.

For each water analysis JBL provides water tests in the form of quick tests or colour change tests. These determine a certain value or several values in one go. With these water tests you can recognise algae problems and negative nitrate, nitrite, potassium, magnesium values etc.

Why test? In addition to a sufficient CO2 supply, iron and trace elements are essential for water plants. Strongly growing aquatic plants permanently need iron and other trace elements, and these are only durable for a limited period during the coupling to so-called chelates, a common feature in modern fertiliser preparations (e.g. JBL Ferropol, JBL Fe +Microelements), so regular monitoring with the JBL Iron Test Fe is needed, along with repeated fertilisation if necessary. Pond owners should check their well water for iron before using it for their pond. Too high iron content can lead to problems in the pond.

Variant: Test set
Composition
Feeding recommendation
Technical details
Size information

1 of 1 reviews

5 out of 5 stars


100%

0%

0%

0%

0%


Give us a rating!

Share your experience with the product with other customers.


30 January 2019 15:36

I am very satisfied with the products from JBL

I am very satisfied with JBL products! I have only been working with JBL for 10 years. I have nothing but good things to say about JBL.

Accessories

Accessories

JBL ProScape Fe + Microelements
JBL ProScape Fe + Microelements - Basic fertilizer JBL ProScape Fe + Microelements - basic fertilizer with iron, potassium, magnesium and complete trace elements required by plants. already contains potassium, but this can also be added extra if many plant species consume large amounts (JBL ProScape K Macroelements) specially designed for heavily planted aquascaping aquariums Dosage depends on light intensity and CO₂ addition contains a pump dispenser that can be screwed onto the bottle instead of the cap and dispenses 2 ml per pump stroke Healthy plant growth is based on the following three main pillars: a supply of light, a supply of CO2 and a sufficient/optimal supply of mineral nutrients. The supply of nutrients is described by Liebig's minimum law. According to this, the substance that is present in the minimum limits the growth of the plants, regardless of whether it is a micro or macro element. Micro elements are trace elements that are required by the plants in small quantities, while macro elements are used in larger quantities for growth.In a well-planted aquarium, both micro and macro elements are consumed in large quantities. In addition to the microelements, the macroelements nitrogen, phosphorus and potassium quickly fall to a minimum, especially when the fish population is low. JBL ProScape Fe +Microelements, which contains all the necessary trace elements in a balanced formula, is suitable for the basic supply of microelements. Trace elements play a decisive role in all life processes. For example, iron is required for the synthesis of the green leaf pigment chlorophyll, cobalt, copper, manganese and zinc are so-called co-factors of proteins, without which they cannot perform their respective functions, boron plays an important role in the regulation of calcium metabolism and in sugar transport within the plant. The drinking waters most commonly used in aquariums have different levels of these micro-trace elements depending on the water supplier, but it can generally be said that drinking water tends to be low in these minerals. For exact dosing of the JBL ProScape Fe +Microelements fertilizer, we recommend determining the current iron content with the JBL Fe Test Set. Iron can be used here as a sum indicator for the other trace elements. It is now possible to measure the iron content with sufficient accuracy using commercially available aquarium tests, so that the supply of microelements can be checked using this value.JBL ProScape Fe +Microelements adds all the necessary trace elements to the aquarium water, as well as the necessary macroelements potassium and magnesium. The normal dosage is 10 ml / 100 l of water for a high-intensity aquarium with >= 1 W / l illuminance; for aquariums with a lower amount of light available, the dosage is 5 ml/100 l of water. The supply of carbon dioxide must also be taken into account, and the following table (Fig.) shows the recommended values for fertilization depending on the conditions of the aquarium. As the actual consumption cannot be predicted exactly, we recommend checking the iron value regularly with the JBL Fe Test Set, especially before the next top-up dose

CHF 18.90

Customers also bought

Tetra Test Carbon dioxide, CO2
Tetra Carbon Dioxide Test CO2Determines the carbon dioxide level reliably and accurately for all freshwater aquariums High range Good long-term stability

CHF 23.10

Windscreen Cleaner Multi-Clan
Window cleaner Multi-Cleany 4 in 1 Window cleaner with aluminium handle and 4 different attachments with robust aluminium handle 50cm 1x attachment with blade cleaner (incl. steel blade) 1x attachment with sponge cleaner 1x attachment with flat rough sponge cleaner 1x attachment with angle cleaner (for aquarium corners)

CHF 19.90

JBL SiO2 silicate test
Variant: Test set | Variant (2): Test set
PROAQUATEST SiO2 Silicate - JBL Quick test to determine the silicate content in freshwater & marine aquariums Package contents: 1 silicate test for approx. 50 measurements, incl. 2 reagents, 2 glass vials with screw caps, dosing spoon, syringe, comparator block and color scale. Reagent refill separately available Silicates (silicic acid) are the cause of unsightly diatoms. With this test you determine the silicate content for diatom control in freshwater and marine aquariums Laboratory comparator system to compensate the inherent water color: fill glass vials with sample water, add reagents to one vial, place vials in holder, read values off color chart Use: when setting up a new aquarium, for checking tap water and during diatom problems You will find detailed information and troubleshooting tips about water analysis on the JBL website in Essentials/Aquarium Healthy aquariums with conditions close to nature The right water values are dependent on the fish stock and the plants in the aquarium. Even if the water looks clear it can be contaminated. With bad values diseases or algae can appear in the aquarium. To maintain a healthy aquarium with conditions close to nature it is important to check and adapt the water values regularly. For each water analysis JBL provides water tests in the form of rapid tests or color change tests. These determine a certain value or several values in one go. With these water tests you can recognise algae problems and negative nitrate, nitrite, potassium, magnesium values etc. Why test? Silicon is one of the most common elements in the world. As a result of the weathering of silicate rocks, silicon is washed into surface and ground water in the form of silicate. Depending on the composition of the rocks in a particular area, the mains water will contain varying amounts of dissolved silicate. The significance of silicon for aquariums and garden ponds is as a nutrient for diatoms, some aquatic plants, siliceous sponges and many other invertebrates. JBL Online Laboratory Regular monitoring for a healthy aquarium with conditions close to nature. Enter your water values into the JBL Online Laboratory and get an in-depth analysis of your values within seconds. Recommended silicate values: Freshwater aquarium (community aquarium): 0-2.0 mg/l Lake Malawi/Lake Tanganyika aquarium: the silicate content is not relevant here because grazing fish species like eating diatoms Plant aquarium with few fish (aquascaping): 0-2.0 mg/l Marine water Aquarium: 0-1.0 mg/l Pond: 0-2.0 mg/l

Variants from CHF 14.50
CHF 26.20

Sera Gravel Cleaner Round
Gravel Cleaner Round - round substrate cleaner The Gravel Cleaner Round is the perfect substrate cleaner for your aquarium. With its round design, it ensures thorough, gentle cleaning of the substrate and effectively removes dirt, deposits and excess nutrients. Thanks to the high-quality workmanship, it is convenient and safe to use, while quick water changes and clean substrate ensure healthy water quality. Ideal for aquarium enthusiasts who value a clean, species-appropriate environment for their fish and plants. With the Gravel Cleaner Round, you can easily clean the substrate, remove dust and debris and ensure stable, clear water quality. Efficient, durable and easy to use - so your aquarium is always perfectly maintained. Rely on quality and professional cleaning - with the Gravel Cleaner Round for a healthy aquarium

CHF 13.50

SuperFish Digi Test EC-TDS
SuperFish Digi Test EC-TDS3-in-1 TDS meter with plug&play function. High performance and fast test results.SuperFish Digi Test EC-TDS. Accurate 3-in-1 TDS meter for. Aquarium and pond water.Measures 3 different values: conductivity (EC), total dissolved solids (TDS) and. Temperature in Celsius (°C) and Fahrenheit (°F).Calibration is not required.The meter has an automatic Temperature compensation function.Automatic shutdown after 5 minutes. UseRemove the protective cap before use.Press the on/off button.Submerge the EC-TDS meter up to the Immersion line into the water. The meter is NOT waterproof, never submerge it beyond the immersion line into the water.The test results are saved automatically after 5-10 Seconds automatically saved. To achieve a better temperature measurement, press CLEAR and repeat the Test. The test results can also be stored by Pressing HOLD to save.Take the meter out of the water, to read the test results.Press the MODE button to toggle between the test modes (ppm, μS/cm, °C and °F).Pressing the CLEAR button will clear the test results are cleared for a new measurement.Wait 30 seconds before starting a new start a new measurement.Wipe the electrode clean, switch off the turn off the meter and replace the protective protective cap back on.Avoid heat and direct sunlight.Care : Keep the electrodes clean and dry. Always close the meter with the protective cap. Please note!  The color change of the display (green/red) has no meaning..

CHF 13.90

JBL Cu Copper Test
Variant: Test set | Variant (2): Test set
JBL Cu Copper Test for heavy metal control Rapid test for determining the copper content in freshwater / seawater aquariums & ponds Recommended value for oodinium treatment: 0.3 mg/l Cu. Accurate test for determining the copper content in freshwater and saltwater aquariums. Graduated values: 0.15; 0.3: 0.45: 0.6; 0.8; 1.2; 1.6; 2.0 mg/l. Also for testing tap water, which should not contain copper. Helps with the dosage of copper-containing remedies and preparations, as the Cu content must never exceed 0.3 mg/l and too low dosages do not have a healing effect.

Variants from CHF 12.50
CHF 25.90

Suggested products

Dennerle KCL solvent solution
Dennerle KCL solution Ideal care for pH electrodes The Dennerle KCL solution ensures the long-term storage and care of pH electrodes. With its special formula, it guarantees optimal moisture to prevent drying out and measurement errors. This solution extends the service life of your pH probe and ensures precise and reliable measurement results in your aquarium. Product benefits Protection against drying out: Ensures correct storage and prevents pH electrodes from drying out. Longer service life: Extends the service life of your pH probe through regular use. Precise measurement results: Helps maintain the measurement accuracy of the pH probe. Easy to use: Direct application for the long-term functionality of your pH electrode. High quality: For reliable results – Dennerle stands for certified aquarium quality. ApplicationFill the Dennerle KCL solution into the storage solution of your pH electrode to keep it moist during storage and extend its service life. Regular use protects against drying out and ensures precise measurement results.

CHF 8.90

Tip
ARKA pH meter / pH measuring device
Digital pH meterThis high-precision instrument has been specially developed for determining the pH value of water. With its user-friendly operation and fast response time, it is a practical tool for anyone who wants to determine the quality of their water. Whether for the home aquarium, the garden pond, the pool in the garden or for checking osmosis and drinking water - the ARKA myAQUA® pH meter provides reliable measurement results.It is ideal for regular monitoring to ensure the well-being of aquatic life or to guarantee water quality for human consumption. The importance of a balanced pH value cannot be overestimated, as it is one of the key factors in maintaining a healthy water system.The ARKA myAQUA® pH meter makes it easier than ever to keep an eye on this critical parameter. Thanks to its compact size and robust design, it is suitable for both home use and professional applications. The simple handling enables even inexperienced users to take precise measurements and thus actively contribute to the care of their water environment.Measuring range: 0.00 - 14.00 pHMeasuring gradation: 0.01 pHAccuracy: +/- 0.01 pHOperating temperature: 0 - 60 °C

CHF 19.90

ARKA pH/TDS/EC meter
Digital pH/TDS/EC meterThe ARKA myAQUA® pH/TDS/EC meter is an advanced water analysis tool designed for comprehensive and accurate testing of various water quality parameters.It can be used to quickly and accurately measure total dissolved solids (TDS), electrical conductivity (EC), pH and temperature in water and other liquids.Its versatility makes it an indispensable tool for monitoring and maintenance in aquariums, ponds, pools and in the treatment of osmosis and drinking water.Whether it is about the health of aquarium inhabitants, the quality of swimming pool water or the safety of drinking water - the ARKA myAQUA® pH/TDS/EC meter provides reliable data that you can always rely on.Measuring range:pH: 0.00 - 14.00 pH TDS: 0 - 9999 ppm EC: 0 - 9999 µS/cmMeasuring gradation: pH: 0.01 pH TDS: 1 ppm EC: 1 µS/cmAccuracy: pH: +/- 0.05 pH TDS: +/- 2% EC: +/- 2%Temperature: 0 - 60 °C 32 - 140 °FATC: 0 - 60 °C 32 - 140 °F

CHF 49.90

SuperFish Digi Test pH
SuperFish Digi Test pHDigital ph meter for aquariums and pond water. This digital meter measures ph with an accuracy of up to 0.02 units, has an automatic calibration function and makes measuring ph much easier.Accurate pH meter for aquariums and. pond water.Measures pH from 0 to 14 with an accuracy of up to 0.02 units.The device features an automatic calibration function for 1-point (6.86) and 2-point calibration (4.00 - 9.18).Calibration powder is included.Automatic power off after 5 minutes.UseRemove the protective cap before use.Press the power button. Submerge the pH meter up to the Immersion line into the water. The meter is NOT waterproof, never immerse the Never immerse the meter beyond the immersion line. beyond the immersion line into the water.Wait about 30 seconds until the reading is numerically constant.Read the pH of the water.Rinse the electrode with distilled water. rinse, dry with a cloth and put the protective cap.Avoid heat and direct sunlight. 1-point calibration 6.68 The calibration accuracy is ± 0.1 pHDissolve the pH 6.86 buffer powder in a beaker with 250 ml of distilled 25°C warm water.Dip the pH measuring instrument into the water with the pH 6.86 solution and wait about 30 seconds.Press and hold the CAL button for 5 seconds.The display will begin to flash 6.86. When it stops flashing, the pH meter has been calibrated.Rinse the electrode with distilled water. rinse with distilled water, dry with a cloth and put the Put on the protective cap. 2-point calibration 4.00 and 9.18 The calibration accuracy is ± 0.02 pHDissolve the pH 4.00 buffer powder in a beaker with 250 ml of distilled 25°C warm water. Dissolve the buffer powder pH 9.18 in another beaker.Dip the pH meter into the water with the pH 4.00 solution and wait about 30 seconds.Press and hold the CAL button for 5 seconds.The display will begin to flash 6.86.Press the CAL button briefly immediately.The display will flash 4.00. Wait until the flashing stops.Rinse the electrode with distilled water. water.Now immerse the pH meter in the Water with the pH 9.18 solution and wait about 30 seconds.Press and hold the CAL button for 5 seconds.On the display begins to flash 6.86.Press the CAL button immediately briefly.On the display flashes 4.00. Press the CAL button again immediately.On the display now flashes 9.18. If it stops stops flashing, the pH meter is calibrated.The electrode with distilled water Rinse with distilled water, dry with a cloth and put the protective cap on.Care: Keep the electrode clean and dry. Always close the meter with the protective cap. Warranty 1 year manufacturer's warranty. Damage due to improper use (battery leakage, water damage) is not covered. Lift the proof of purchase for proof of warranty. for proof of warranty. The warranty will be voided without proof of purchase! The batteries supplied free of charge have a life of one year. If they are empty at the time of the empty, you must replace them yourself. replace them yourself.

CHF 16.90

SuperFish Digi Test EC-TDS
SuperFish Digi Test EC-TDS3-in-1 TDS meter with plug&play function. High performance and fast test results.SuperFish Digi Test EC-TDS. Accurate 3-in-1 TDS meter for. Aquarium and pond water.Measures 3 different values: conductivity (EC), total dissolved solids (TDS) and. Temperature in Celsius (°C) and Fahrenheit (°F).Calibration is not required.The meter has an automatic Temperature compensation function.Automatic shutdown after 5 minutes. UseRemove the protective cap before use.Press the on/off button.Submerge the EC-TDS meter up to the Immersion line into the water. The meter is NOT waterproof, never submerge it beyond the immersion line into the water.The test results are saved automatically after 5-10 Seconds automatically saved. To achieve a better temperature measurement, press CLEAR and repeat the Test. The test results can also be stored by Pressing HOLD to save.Take the meter out of the water, to read the test results.Press the MODE button to toggle between the test modes (ppm, μS/cm, °C and °F).Pressing the CLEAR button will clear the test results are cleared for a new measurement.Wait 30 seconds before starting a new start a new measurement.Wipe the electrode clean, switch off the turn off the meter and replace the protective protective cap back on.Avoid heat and direct sunlight.Care : Keep the electrodes clean and dry. Always close the meter with the protective cap. Please note!  The color change of the display (green/red) has no meaning..

CHF 13.90

Seneye Home - Freshwater Aquarium
Seneye Home - Freshwater Aquarium - Automatically tests multiple life critical parameters temperature - constantly monitors water temperature, so you can get an alert if your heater breaks free ammonia - monitors the highly toxic free ammonia (NH3) at very low levels, so you can stop your fish from dying from Ammonia posioning pH monitoring - the seneye monitors pH in your aquarium or pond water between 6.4 and 9. This range is ideal for most aquatic life and by monitoring this range increased accuracy has be achieved. Total Light - monitor your light levels over the course of the day and know if if your lights fail. water level - readings are only taken when the seneye device is in water, no false readings.   Easy to install, simply drop in Constantly watching your aquarium, 5600 readings per month Customisable alerts, directly to e-mail and SMS * Upload results and get straightforward advice * USB connection with multiple connection options, including optional USB power adaptor *seneye+ required for some features. system requirements Windows PC with internet connectivity running Windows 7, 8, 10 32/64bit - Not compatible with Belkin Base and virtual USB extenders.Full speed USB 1.0 portMinimum 1Ghz processor and 128mb RAMInternet Browser: Internet Explorer 9.0+, Firefox 4.0+, Safari 4.0+Download of seneye connect application required from seneye.com Ever lost a fish and not know why? Ever experience new tank syndrome and wished there was a way of knowing when the water is safe for your fish? With a seneye Home it’s now possible for even the most inexperienced fish keeper to be successful and become an expert. Automatic monitoring with a seneye Home can save fish from the devastating effects of ammonia poisoning, as well as from harmful swings in pH and temperature. The intelligent software can even alert the you before there is a problem, so you can relax and enjoy without having to worry – all this and it’s so simple to use. As the seneye devices are USB there are multiple connection options available. When connected to the Power Adaptor readings are stored every hour and flashing lights on the device indicate if there is a problem. Readings are stored for 35 days and are automatically uploaded once reconnected to a PC.

CHF 139.90

Tip
JBL ProScan - Water analysis / Smartphone App
Variant: Basic set | Variant (2): Basic set
JBL ProScan - Water analysis via smartphone app JBL ProScan - Water analysis with evaluation via smartphone app With JBL Pro Scan, the current aquarium water values can be determined quickly and easily via smartphone app. All you need to do is install the free JBL app from the Apple AppStore or Google PlayStore on your smartphone. Basic set: Contains 24 analysis strips (GH, KH, pH, nitrite, nitrate, chlorine and CO₂ calculation) with associated JBL ProScan ColorCard. The colour chart serves as a reference when scanning the analysis strip. The result is evaluated and, if necessary, instructions are displayed on how the water values can be optimised. The corresponding app is available free of charge. Refill set: 24 analysis strips for digital evaluation with the JBL ProScan app. Depending on the area of application, the app can be used in "Aquarium fresh water", "Garden pond water" and "Water" mode. If "Aquarium freshwater" and "Water" are selected, the app also automatically calculates the current CO2 content in the water from the values determined for pH and KH. Based on the results of the analysis, the app provides specific recommendations for action and information on how to achieve ideal water values. The "Water" function only provides the pure water values. The recording of the analysis strips and the calibration with the ColorCard should be carried out in bright daylight or artificial light. Direct sunlight should be avoided. The specified sequence of the app should always be followed during the measurement to ensure correct results. The app can be used in German and French. Instructions for use:After starting the app for the first time, a one-off calibration using the JBL ProScan ColourCard is required. This calibration can be carried out quickly and easily by anyone. Afterwards, the water values can be analysed and evaluated immediately in conjunction with the JBL ProScan analysis strips. Immerse the analysis strip in water for 1 second, shake it off and then place it on the reference colour card (JBL ProScan ColorCard). Select the water type with the free ProScan app (in the Apple store & Google PlayStore), scan the colour card like a QR code and wait briefly for the result (waiting time is carried out by the app). The result is displayed directly in mg/l, ° hardness and the pH value. The values are evaluated by the app (good - medium - bad) and recommendations for optimisation are displayed. The type of ambient light is automatically evaluated and taken into account for colour calibration. The JBL ProScan analysis strips have been specially adapted for evaluation with the colour chart. No accuracy can be guaranteed with other test strips.

Variants from CHF 27.50
CHF 29.90

JBL Test Combi Set plus Fe
JBL Test Combi Set plus Fe Test case with the most important water tests in freshwater aquariums, incl. iron test Monitors the water values in aquariums simply and reliably. Determines: pH value, carbonate hardness, iron, nitrite, nitrate, CO2 (calculation via table) Easy to use: syringe for exact measurement of the water quantity, detailed instructions for use Laboratory comparator system to compensate the inherent water colouring, analysis record sheet, instructions for problem solving, CO2 table Child-proof reagent bottles, water-proof plastic case, refillable kit Package contents: 1 test case for planted aquariums, 5 reagents, 3 glass vials, syringe, dosing spoon, comparator block, plastic cuvette, colour charts, analysis record sheets, instructions Healthy aquariums with conditions close to nature The right water values are dependent on the fish stock and the plants in the aquarium. Even if the water looks clear it can be contaminated. With bad values diseases or algae can appear in the aquarium. To maintain a healthy aquarium with conditions close to nature it is important to check and adapt the water values regularly. With the JBL Test Combi Set you can determine the 5 most important water values in your aquarium. Precise measurement of the following values: pH test: acidity of the water from 3.0 to 10 KH test: pH stability of the water (carbonate hardness) Fe test: iron value to control the fertilisation NO2 test: toxic nitrogen compound NO3 test: reason for algae growth To determine the CO2 content you just need to measure the pH and KH values. From both values arises the CO2 content in the water, which then can be referenced from the enclosed table. You can analyze your measured water values in the JBL Online Laboratory free of charge and receive recommendations.

CHF 82.50

JBL EasyTest 7in1 - Test strips
JBL PROAQUATEST EASY 7in1 Test strips for quick aquarium water testing Test strips for testing 7 important water values in 1 minute: quick test for general guidance when testing aquarium, pond, well and tap water Easy to use: Move the test strip in the water for 2-3 seconds. Remove the test strip. Let the water drain off sideways. Compare the test strip with the colour scale on the packaging after 1 minute. Read off the CO2 value in the table Determines the following water values: chlorine, acidity (pH), general hardness (GH), toxic nitrite compound (NO2), cause of algae (NO3), pH stability (KH) and main plant nutrient (CO2 content using the table) Package contents: test strips EasyTest 7 in 1 on colour scale and CO2 table. Contents: 50 test strips

CHF 24.90

JBL pH 3.0-10.0 test
Variant: Test set | Variant (2): Test set
JBL pH Test 3.0-10.0 - Quick test to determine the acidity in ponds as well as in freshwater and marine aquariums Easy and reliable monitoring of the water values of aquariums and ponds. Determines the ideal pH values for freshwater and seawater Quick test: fill plastic vial with sample water, add reagent, read value of the sample off colour chart When to use: for setting up a new aquarium: daily for one week, afterwards weekly 1 quick test, pH Test 3-10 Test for approx. 80 measurements Healthy aquarium/healthy pond with conditions close to natureThe right water values are dependent on the fish stock and the plants in the aquarium/pond. Even if the water looks clear it can be contaminated. With bad values diseases or algae can appear in the aquarium/pond. To maintain a healthy aquarium/pond with conditions close to nature it is important to check and adapt the water values regularly. For each water analysis JBL provides water tests in the form of quick tests or colour change tests. These determine a certain value or several values in one go. With these water tests you can recognise algae problems and negative nitrate, nitrite, potassium, magnesium values etc. Why test?The well-being of aquarium and pond dwellers and the growth of aquatic plants depend to a large extent on the pH level being kept as constant as possible. The pH level can also affect many substances dissolved in the water. Fluctuations in the pH level are definitely to be avoided.

Variants from CHF 6.50
CHF 13.90

JBL test set CO2 / pH permanent
Variant: Test set | Variant (2): Test set
JBL Test Set CO2 / pH Permanent - easy monitoring of water values Simple and reliable monitoring of aquarium water parameters. Continuous direct measurement of the optimum pH value and carbon dioxide content for freshwater aquariums Permanent test for fertiliser control: Add reagent to the permanent test device and attach to the glass in the aquarium using suction cups. Compare the reagent colour with the colour scale sticker and read off the value. Display of pH value (6.4 - 7.8) and CO2 content can be measured Online laboratory: Regular checks for a healthy aquarium with near-natural conditions. Water tests in the form of rapid tests or colour change tests are available for every water analysis. Aquarium water testing for healthy, clear water Scope of delivery test set: 1 permanent test, test set CO2 Permanent incl. permanent test, 2 reagents and adhesion colour card Scope of delivery refill: 2x 10ml CO2 Permanent plus ph

Variants from CHF 11.50
CHF 23.90

Tetra Test PH Freshwater, 10ml
Tetra Test pH - Measures the pH value reliably and precisely Measures the pH value reliably and precisely For all freshwater aquariums excellent long-term stability for a large number of analyses excellent long-term stability Packaging Units10 ml  

CHF 12.90

Customers also saw

JBL Fe Iron Test
Variant: Test set | Variant (2): Test set
JBL Iron Test Fe - Quick test to determine the iron content in freshwater/marine water aquariums & ponds Easy and reliable monitoring of the water values of aquariums/ponds. Helps determine the ideal iron content to check the fertilisation for freshwater and marine water Laboratory comparator system to compensate the inherent water colouring: fill plastic cuvette with sample water, add reagents to another cuvette, place cuvettes in holder, read values on colour chart Duration of use: for setting up a new aquarium: 1 x after setting up, afterwards weekly. In case of green algae problems or when plants don’t grow properly. Testing aquarium water for healthy, clear water 1 quick test, Iron Test Fe. Contents for approx. 50 measurements, incl. reagent, 2 glassvials with screw cap, syringe, comparator block and Fe colour scale. Refill reagent available separately Healthy aquariums with conditions close to natureThe right water values are dependent on the fish stock and the plants inside the aquarium. Even if the water looks clear it can be contaminated. With bad values diseases or algae can appear in the aquarium. To maintain a healthy aquarium with conditions close to nature it is important to check and adapt the water values regularly. For each water analysis JBL provides water tests in the form of quick tests or colour change tests. These determine a certain value or several values in one go. With these water tests you can recognise algae problems and negative nitrate, nitrite, potassium, magnesium values etc. Why test? In addition to a sufficient CO2 supply, iron and trace elements are essential for water plants. Strongly growing aquatic plants permanently need iron and other trace elements, and these are only durable for a limited period during the coupling to so-called chelates, a common feature in modern fertiliser preparations (e.g. JBL Ferropol, JBL Fe +Microelements), so regular monitoring with the JBL Iron Test Fe is needed, along with repeated fertilisation if necessary. Pond owners should check their well water for iron before using it for their pond. Too high iron content can lead to problems in the pond.

Variants from CHF 13.50
CHF 27.90