Zoo Med Environmental Control Center - Terrarium control unit 6-fold

  • 6-fold control
  • Thermostat + hygrostat
  • Timer day/night
  • Alarm & memory function
  • Probes included
Article no: ZRT-1000E

CHF 159.00

Stock: 2

Available, delivery time: 1-3 days

Delivery between Thursday, 23 April and Friday, 24 April
Zahlungsarten
Product information "Zoo Med Environmental Control Center - Terrarium control unit 6-fold"

Zoo Med Environmental Control Center - 6-way terrarium controller for temperature, humidity & light

The Zoo Med Environmental Control Center is a comprehensive control unit for the automation of heating/cooling, humidity and lighting in the terrarium. With 6 slots, 2 temperature sensors and 1 humidity sensor as well as alarm and memory functions, it supports stable values and realistic day/night sequences.

Advantages:

  • 6 slots for heating, cooling, humidity and timer functions

  • 2 temperature probes + 1 humidity probe for precise control

  • Programmable night setback for natural temperature curves

  • Alarm function for extreme values (temperature/humidity)

  • Memory function for settings in the event of a power failure

  • Total load up to 1850 W (combined, limited per channel)

The Zoo Med Environmental Control Center is the central control point for modern terrarium technology. It automates temperature, humidity and lighting and helps to set constant husbandry conditions and a natural day/night rhythm. Ideal for reptiles, amphibians and planted terrariums where reliable control of the technology is crucial.

Slots / channels (overview)

  • 1: Dimming Heat - dims a heat source to maintain a constant temperature

  • 2: Heat/Cool - switches heating or cooling depending on the setting

  • 3: Humi/Dehumi - controls humidification or dehumidification (e.g. fogger/ventilation)

  • 4: Timer - switchable with time program (additional consumers)

  • 5 & 6: Day/Night - separate switching for day and night devices (e.g. light/night light)

Important note: The dimming channel is not suitable for certain lamp types (e.g. some UV/special lamps). Please observe the manufacturer's instructions for the lamps used.


FAQ

1. which terrariums is the control unit suitable for?

For most terrarium set-ups with reptiles, amphibians or plant terrariums in which temperature, humidity and light are to be controlled automatically.

2. what exactly can the device control?

Depending on the connected devices, it controls heat sources, cooling (e.g. fan), humidification (e.g. fogger/mister), dehumidification/ventilation and lighting via timer and day/night switching.

3. are sensors included in the scope of delivery?

Yes, 2 temperature probes and 1 humidity probe are usually included (for immediate commissioning).

4. can a night setback be set?

Yes, a night setback can be programmed so that the temperatures behave more naturally at night.

5. will the appliance continue to function after a power failure?

The settings remain saved. Depending on the situation, it may be necessary to set the time again so that timer functions run accurately again.

6. do I also need a thermometer/hygrometer?

Not necessarily, as the appliance works with probes. However, a separate measuring device may be useful for additional monitoring (e.g. at a different position in the terrarium).

7. which devices should not be operated on the dimming channel?

Not every lamp or heat source is dimmable (e.g. certain UV/special lamps). Please always check whether the connected device is approved for dimming - otherwise use the switching channels (Heat/Cool).

8. how to position the probes correctly?

It is best to position the temperature probes where the target values are relevant (e.g. warm area and cool area). Position the humidity probe so that it does not hang directly in the water jet of a fogger in order to avoid incorrect measurements.



Composition
Feeding recommendation
Technical details
Size information

0 of 0 reviews

Give us a rating!

Share your experience with the product with other customers.


Suggested products

Exo Terra Terrarium Mini Fan
Exo Terra Terrarium Mini Fan Quiet, efficient fan for optimal air circulation in the terrarium The Exo Terra Terr arium Mini Fan is a compact, energy-efficient, low-voltage fan specially designed for terrariums. With its virtually silent operation, it ensures optimal ventilation and fresh air circulation, reduces stagnant air and creates a healthy climate for animals and plants. Good air circulation is crucial for the well-being of reptiles, amphibians and tropical plants. The mini fan improves air exchange, prevents condensation and reliably prevents mold and fungal growth.Product features Improved air circulation: Increases the air exchange and ensures continuously fresh, oxygen-rich air in the terrarium. Virtually silent operation: The high-quality 9-blade fan with ball bearing system runs quietly and reliably - ideal for living spaces. Effective humidity regulation: Prevents condensation, reduces stagnant mist and supports a stable humidity level. Natural climate simulation: Can be combined with a timer to realistically simulate day/night cycles and natural humidity fluctuations. Healthy environment: Prevents respiratory infections in animals, prevents anaerobic bacteria from thriving and eliminates unpleasant odors. Plant-friendly: Reduces heat stress, improves nutrient uptake and promotes vigorous plant growth in tropical terrariums. Energy efficient and safe: Only 1 watt power consumption with safe low-voltage operation. Easy to install: Easy to attach to the mesh grille cover with four fixing pins - no tools required. Flexible orientation: Can both direct air into the terrarium and draw it out - depending on the desired climate effect. Durable and versatile: Robust construction and soft silicone cable for flexible positioning. Advantages of the Exo Terra Terrarium Mini FanThe Exo Terra Mini Fan offers numerous advantages for pet owners and plant lovers. It significantly improves the air quality in the terrarium by removing stagnant air and supplying fresh air. The gentle air flow prevents excessive humidity, reduces the risk of mold and ensures a clear view of the terrarium inhabitants. At the same time, it protects animals from respiratory diseases and supports natural behavior through realistic humidity and temperature cycles. Plants also benefit: The even air flow reduces heat stress, promotes growth and boosts vitality. Thanks to its quiet, energy-efficient operation and simple installation, the mini fan is ideal for everyday use - reliable, safe and low-maintenance.Technical data Power: 1 watt Voltage: Low voltage (safe operation) Fan: 9-blade system with ball bearings Noise level: Very quiet Installation: Plug & play with 4 retaining pins Material: High-quality, durable components Connection: Flexible silicone cable, compatible with standard mains adapters

CHF 24.90

Hobby Terra Fun
Terra Fan - Constant air circulation & optimum terrarium climateThe Terra Fan ensures reliable, constant air circulation and therefore a stable, healthy climate in the terrarium. Thanks to the integrated digital display and precise temperature and humidity sensor, you can keep an eye on all the important climate data at all times.With two adjustable speeds, the air flow can be optimally adapted to the needs of your terrarium animals and the terrarium furnishings. The Terra Fan effectively prevents waterlogging, mold growth and heat build-up and ensures fresh, evenly distributed air - a basic requirement for keeping many reptiles, amphibians and invertebrates.In tropical terrariums in particular, it contributes to a stable microclimate and improved air quality. Thanks to its compact, lightweight design, the Terra Fan can be positioned flexibly and is easy to install. It is operated via a standard USB power supply unit (5 V, min. 1 A, not included) and is therefore particularly energy-efficient.Product advantagesIntegrated digital display shows temperature & humidity in real timePrecise combination sensor for optimum climate managementTwo adjustable speeds for individual ventilationPrevents waterlogging, heat and humidity build-upEffectively minimizes the risk of mould growth and odoursIdeal in combination with Hygro System & Humidity Control IICompact, flexible design - easy to installUSB-compatible for uncomplicated operation (power supply unit not included)Technical data: DimensionsDimensions: 9.5 × 9.5 × 3 cmWeight: 158 gInput voltage: DC 5 V / 1 A (USB-compatible)Power: max. 5 WTemperature measuring range: 0 °C to 80 °CHumidity measuring range: 10 % - 95 % rHTemperature accuracy: ± 1 °CHumidity accuracy: ± 1 %Sensor cable length: 130 cmCable length USB connection: 130 cm

CHF 47.90

Thermo-/hygrometer, analogue
Trixie thermo/hygrometer - analogThis analog thermo/hygrometer has a measuring range of -25 °C to 55 °C anda humidity measurement of 0 % to 100 %.Easy to attach with adhesive strips on the back.size: Ø 7.5 cm

CHF 8.90

Analogue Thermometer
Trixie analogue Thermometer This analogue thermo-/hygrometer has a measuring range from -20 °C to 50 °CEasy to attach with adhesive strips on the back.Size: Ø 5 cm

CHF 5.90

Trixie thermometer and hygrometer, digital
Trixie thermometer and hygrometer (digital) Trixie thermometer and hygrometer for precise monitoring. visually very stylish device digital display ensures precise monitoring of temperature and humidity in the terrarium the measuring range is from 0 °C to 50 °C (32 °F to 122 °F) and 30 % to 90 % humidity easy to attach with suction cup size 3x6cm

CHF 16.80

Lucky Reptile - Thermometer
Lucky Reptile - Thermometer Analogue measuring Thermometer These analogue measuring devices are perfect for environments with high humidity. They have to be installed inside the terrariums as the temperature/humidity is measured directly at the device. Adhesive tape at the back of the device allows for quick and easy installation. Available are a single thermometer, a single hygrometer and a thermo-/hygrometer combination.  

CHF 7.90

Thermo Control Pro 2 circuits
Thermo Control Pro II circuits Thermo Control PRO II Professional digital thermostat with programmable night setback and timer The Thermo Control PRO II is a further development of the Thermo Control II. The main differences are a real-time clock and two temperature ranges so that different temperatures can be set for day and night. Switching between day/night operation is time-controlled. In contrast to the Thermo Control II, the time can be set in units of minutes for the timer on this model. There are two possible ON/OFF times. In addition, the device can be switched between heating and cooling mode, e.g. for operating fans. When the set temperature is reached, the thermostat switches on instead of off. The maximum switching capacity is 1000W and the temperature range is 0-50°C. In the past, under certain circumstances, a large number of faults have occurred in a batch of devices. These have now been rectified and the current devices work faultlessly! Please note that the Thermo Control Pro 2 has a German plug! A transition plug is therefore necessary.Two-pole devices can be connected to the controller.

CHF 99.00

Reptiles Planet - Small Thermometer
Reptiles Planet - Small Thermometer - Digital thermometer with probe Temperaturbereich: -9°C - 110°C LCD-Anzeige Präzise Sonde mit Saugnapf zur Befestigung im Terrarium einfache Bedienung

CHF 16.90

Hobby - Biotherm Eco
Microprocessor-controlled temperature controller with inversion function for heating / cooling, night reduction of temperature and visual alarm. Night reduction of temperature possible visual alarm Inverting function for heating / cooling Activity indicator equipped with LED light high accuracy and easy to use robust Temperature sensor interchangeable 3m sensor cable easy to handle The temperature controller is equipped with an LED light for the activity display of connected heating or cooling units. When switching to the programming mode, the external device slot is switched off for safety reasons. To protect electronic components, a delay of 60 seconds is set between 2 switching states before the slot is reactivated. Short or short circuit of the temperature sensors are indicated as errors. The temperature sensor is equipped with a USB connector for defect replacement.

CHF 98.00

Thermo-Hygrometer Deluxe Pro
Lucky Reptile Thermo-Hygrometer Deluxe Pro The Thermo-Hygrometer Deluxe PRO has a combination remote sensor for humidity and temperature as well as a second temperature sensor. Combined remote sensor for humidity and temperature Values can be determined externally Min/max values are saved Switchable between Celsius and Fahrenheit The Thermo-Hygrometer Deluxe PRO has a combined remote sensor for humidity and temperature as well as a second temperature sensor. This means that all values can be determined externally and the device itself can be installed outside the terrarium. Min/max values are saved for all measuring points. Switchable between Celsius and Fahrenheit.

CHF 38.90

Combometer from Exo Terra
Combometer - Digital Thermo-Hygrometer with remote sensor The Exo Terra Digital Thermo-Hygrometer is a 2-in-1 precision instrument, equipped with a remote combined sensor for accurate temperature and humidity indication. This precision instrument has a programmable minimum/maximum memory setting which can be controlled with a single button. Durable and easy to use, the Exo Terra Digital Thermo- Hygrometer can be installed with hook & loop fastener (included), or by simply sliding it into position on top of the Exo Terra Compact Top or Linear Fluorescent Top. Accurate temperature and humidity indication Single button operated Combined remote sensor for temperature and humidity Minimum / Maximum memory Fits the Exo Terra Compact Top and Linear Fluorescent Top Canopies

CHF 39.90

Humidity Control 2 Hygrostat
Lucky Reptile Humidity Control 2 Hygrostat The proven, 100% reliable humidistat for the terrarium: Lucky Reptile Humidity Control 2! Digital humidity control with modern terrarium technology. Two circuits for different humidity settings day and night Real-time clock, times of day are defined overnight Integrated timer Constant humidity display Device can be switched between humidifying and dehumidifying Alarm function in case of deviation - Adjustable between 1% and 50% relative humidity Precise remote sensor Earthed sockets Switching capacity of max. 1000W Suitable for Mini Mebler, sprinkler system, humidifier ect. It has two time zones that allow different settings for day and night. A real-time clock is integrated in the device so that switching between day and night mode can be done flexibly via the time. A timer is also integrated, allowing you to set two ON/OFF times via the clock. The smallest time period is one minute. Other functions include an alarm function (visual and audible), the option to switch from humidifier mode to dehumidifier mode, e.g. for use with fans, and the option to influence the switching mode of the hygrostat. You can define the deviation at which the hygrostat switches. For example, a value of 15 can be selected, i.e. the humidifier is only switched on when the measured humidity is 15% below the setpoint. This can be useful to prevent the humidifier from constantly switching on and off and in nature the humidity also fluctuates. Devices with a maximum output of 1000W can be connected. The display constantly shows the measured humidity. The range is between 1 and 99%. Please note that the Thermo Control Pro 2 has a German plug! An adapter plug is therefore necessary. Two-pole devices can be connected to the controller.

CHF 119.00

Customers also saw

Bright Control Pro 3
Bright Control Pro 3 / 35W - 50W - 70W Electronic multiwatt - ballast for metal halide lamps Switchable between 35W, 50W and 70W Intelligent soft-start function Fully wired Special connector for easy installation The ballast from Lucky Reptile is a multi-wattage ballast that covers three different watt variants.35Watt, 50Watt and 70Watt. That is the difference to the predecessor model, since now the possibility exists Bright Sun lamps of different Watt strength at a ballast to operate. The desired wattage can be conveniently adjusted via the slide switch on the side of the ballast. The ballast from Lucky Reptile is specially designed for the corresponding lamps, as the ballasts affect the light spectrum and therefore the UV range.Ballast and metal halide lamp work as a unit and must be matched. Only then is it guaranteed that the animals are supplied with sufficient UV light in the optimal spectrum. The Bright Control Pro 3 powered by Philips ensures that it harmonises perfectly with the Bright Sun.

CHF 136.90

Humidity Control 2 Hygrostat
Lucky Reptile Humidity Control 2 Hygrostat The proven, 100% reliable humidistat for the terrarium: Lucky Reptile Humidity Control 2! Digital humidity control with modern terrarium technology. Two circuits for different humidity settings day and night Real-time clock, times of day are defined overnight Integrated timer Constant humidity display Device can be switched between humidifying and dehumidifying Alarm function in case of deviation - Adjustable between 1% and 50% relative humidity Precise remote sensor Earthed sockets Switching capacity of max. 1000W Suitable for Mini Mebler, sprinkler system, humidifier ect. It has two time zones that allow different settings for day and night. A real-time clock is integrated in the device so that switching between day and night mode can be done flexibly via the time. A timer is also integrated, allowing you to set two ON/OFF times via the clock. The smallest time period is one minute. Other functions include an alarm function (visual and audible), the option to switch from humidifier mode to dehumidifier mode, e.g. for use with fans, and the option to influence the switching mode of the hygrostat. You can define the deviation at which the hygrostat switches. For example, a value of 15 can be selected, i.e. the humidifier is only switched on when the measured humidity is 15% below the setpoint. This can be useful to prevent the humidifier from constantly switching on and off and in nature the humidity also fluctuates. Devices with a maximum output of 1000W can be connected. The display constantly shows the measured humidity. The range is between 1 and 99%. Please note that the Thermo Control Pro 2 has a German plug! An adapter plug is therefore necessary. Two-pole devices can be connected to the controller.

CHF 119.00

Jungle Dawn LED Bar - terrarium lighting
Watt: 15 watts
Jungle Dawn LED BAR - LED lighting The Arcadia Reptile Jungle Dawn LED BAR is the absolute ultimate in terrarium lighting. With its slim, boldly designed, powerful core, it is able to provide the energy your plants need to grow optimally. This clever system utilises the very latest 'High OutPut' LED diodes to produce an incredible 130+ lumens per watt.Your diurnal terrarium animals will actively sunbathe and their well-being is guaranteed to improve. Use the bar on a mesh terrarium or attach the bar directly inside the terrarium. As with all life, plants depend on the quantity and quality of the energy available to them from a light source. The greater the amount of light and the larger the illuminated area, the better the potential result. The LED bars have been specially developed for terrarium animals, which means that the flicker is eliminated for the animals. (Not like conventional LED lamps)To enable terrarium animals to metabolise vitamin D, you need the Pro T5 tubes to supply the UVB light in addition to the LED lamps. (Items available separately) 15 watts - length 27 cm (terrarium 30 cm) 22 watts - length 43 cm (terrarium 45 cm) 34 watts - length 57 cm  (terrarium 60 cm) 51 watts - length 87 cm (terrarium 90 cm)

CHF 79.00

New
Ceramic yarn stick holder
SuperFish ceramic shrimp stick holder - food holder for shrimp sticksPractical ceramic holder for SuperFish shrimp sticks: The stick stands upright in the aquarium without disturbing the substrate. Ideal for shrimp tanks and aquascape - for clean feeding and good observation.Product advantages: Specially developed for SuperFish shrimp sticks (but also works for other brands)Stick stands upright - feeding area remains definedSubstrate is not disturbed (soil/gravel)Ceramic material: inconspicuous, stable, suitable for aquariumsContent: 1 pieceThe SuperFish ceramic shrimp stick holder is a practical solution for feeding shrimp sticks in a clean and controlled manner. The holder ensures that the stick stands upright in the aquarium so that the food intake can be easily observed and the feeding area remains in a fixed position. At the same time, the substrate is not stirred up, which is a great advantage, especially with soil and aquascaping layouts. Tip: Also ideal if the substrate is too low to insert sticks stably - the holder provides stability.FAQ What is the Shrimp Stick Holder for? It holds SuperFish shrimp sticks upright in the aquarium so that the food is stable and can be offered in a targeted manner. Will the substrate be damaged or stirred up?No, the holder is designed to place the stick upright without disturbing the substrate. How many pieces are included?1 piece per pack. Is the holder only suitable for SuperFish Shrimp Sticks? It is specially designed for SuperFish Shrimp Sticks. Depending on the stick diameter, it may also be suitable for similar "shrimp lollies/sticks". How should the holder be cleaned?Rinse with clear water; if necessary, clean with a soft brush (without detergent).

CHF 3.60

Terrarium Vista Panorama 60
Exo Terra Panorama Terrarium Vista 60With the Exo Terra Vista Panorama Terrarium 60, you are choosing a well-designed glass terrarium that combines an impressive 180° panoramic view with a high level of safety and ease of use. The rounded glass front corners create a special depth effect and allow you to observe your animals perfectly. At the same time, the large floor area offers plenty of usable living space for a near-natural setup with different microclimates.Product features:180° panorama thanks to rounded glass front corners, clear view in front and side areasLarge floor area for more structure, retreats and different temperature and humidity zonesAdjustable front window ventilationsupports air circulation, climate regulation and reduces condensation at the frontFront and top access for care, set-up and feeding without unnecessary stressLockable double door, doors can be opened separately for safe handling and low-traffic workRemovable front doors for particularly easy cleaning and maintenanceHinged, lockable mesh cover as escape protection; UVB and infrared permeableHigh-quality black anodized stainless steel mesh (304) for durable, stable ventilationClosable openings for hoses and cables, ideal for technology integration (e.g. irrigation, sensors)Suitable for Exo Terra Monsoon irrigation systemWaterproof base for humid setups, bioactive substrates or small water areasRaised base frame, practical for mounting a heating mat under the terrariumPVC rear wall for better insulation than glass and more design freedom in the set-upCompact transport dimensions and quick set-up time, supplied as a kitSize: 60 × 45 × 45 cm (Vista 60The Exo Terra Vista 60 is designed to make everyday terrarium keeping noticeably easier for you and at the same time offer your animals more usable space. The rounded glass front corners give you a real panoramic perspective over 180°, which makes observing the animals much more pleasant and gives the terrarium a very high-quality appearance. A key advantage is the large floor area: you can create different zones in the same terrarium, for example warmer and cooler areas, drier and wetter areas and several hiding and climbing structures. This supports natural behaviors, promotes movement and reduces stress - especially for species that actively move between microclimates.the adjustable front panel ventilation ensures a stable terrarium climate. It supports a constant flow of air and helps you to control the temperature and humidity in a targeted manner. At the same time, the front pane remains free of condensation even at high humidity levels, which improves visibility and hygiene.In practice, the Vista 60 impresses with its convenient access: from the front via the lockable double door and from above via the hinged, lockable mesh cover. This allows you to set up the terrarium easily, feed with less stress and carry out maintenance work safely. The mesh cover is made of black anodized stainless steel mesh and is designed to allow UVB and infrared radiation to enter the terrarium easily,and the terrarium is also prepared for technology: Closable openings for cables and hoses facilitate the integration of lighting, sensors or irrigation. The Vista 60 is also suitable for the Exo Terra Monsoon irrigation system. The waterproof base also opens up setups with moist substrate, bioactive concepts or small water areas.Suitable for which animal species?The Vista 60 (60 × 45 × 45 cm) is particularly suitable for small to medium-sized terrarium animals, depending on species, final size, activity level and Swiss minimum requirements. The minimum size is calculated on the basis of the animal's body length.Typical areas of application areGeckos (e.g. smaller species, depending on how they are kept, rather highly structured facilities)Anoles and similar diurnal climbing speciesSmall amphibian species (depending on humidity requirements, bioactive also possible thanks to waterproof floor)Invertebrates (e.g. larger insect species or arachnids, provided the climatic requirements are suitable)Young animals or temporary rearing or quarantine housing for larger species (check on a species-specific basis)Note for Switzerland: Please base the size of the terrarium and its furnishings on the species-specific requirements and the provisions of animal welfare legislation (TSchV). If in doubt, we will be happy to advise you on the appropriate size.Zoo Roco TipPlanthe technology right away when setting up: Run cables/hoses through the designated, closable openings before you fully set up the terrarium. This keeps everything clean, safe and tidy. Actively use the adjustable front ventilation to reduce condensation and finely adjust the temperature and humidity.

CHF 329.00

Hobby - Biotherm Eco
Microprocessor-controlled temperature controller with inversion function for heating / cooling, night reduction of temperature and visual alarm. Night reduction of temperature possible visual alarm Inverting function for heating / cooling Activity indicator equipped with LED light high accuracy and easy to use robust Temperature sensor interchangeable 3m sensor cable easy to handle The temperature controller is equipped with an LED light for the activity display of connected heating or cooling units. When switching to the programming mode, the external device slot is switched off for safety reasons. To protect electronic components, a delay of 60 seconds is set between 2 switching states before the slot is reactivated. Short or short circuit of the temperature sensors are indicated as errors. The temperature sensor is equipped with a USB connector for defect replacement.

CHF 98.00

MossBase powder 40g
Shroomroom MossBase 40 g - for terrariums and paludariums Moldable base for moss-covered back walls or cavesShroomroom MossBase is a natural decoration and design element in powder form (40 g), developed for creative landscapes in terrariums and paludariums. Mixed with water, it creates a mass with which you can prepare dry surfaces in a targeted manner in order to realistically design decorative moss areas. Properties and advantages Natural decorative powder for creating moss surfaces in terrariums and paludariums Is mixed with water to form a malleable mass (typically 40 g powder with approx. 80 ml water) Unique consistency for preparing dry surfaces for moss growth Ideal as a base for the targeted placement of moss spores and plant seeds Perfect for creating moss-covered backgrounds or nature-like landscapesIf you want to create natural scenes in your terrarium or paludarium with moss areas, overgrown back walls or detailed transitions, Shroomroom MossBase is a well thought-out design aid. The product is supplied as a powder and is mixed with water to form a malleable mass. A typical mixture is 40 g powder to around 80 ml water, which creates a consistency that is easy to model. The mixed mixture is suitable for preparing dry surfaces so that mosses adhere better later and can be integrated decoratively. MossBase is particularly exciting in combination with Shroomroom MossMix: as a base, it helps you to fix moss, fern or spore material specifically to the desired substrate in order to achieve lasting, convincing, nature-like looks. Important for correct application: Shroomroom MossBase is a purely decorative design element. It is not a substrate for plant growth, a fertilizer or a growth promoter. You use the product exactly where it has its strengths: in detailed, near-natural terrarium and paludarium design. Zoo Roco tip Apply MossBase in thin layers and create soft transitions so that the surface looks natural later on. Preferably place moss areas in zones where your setup offers the right microclimate. For particularly realistic results, many terrarium builders work with a base of MossBase and then apply MossMix in precise areas instead of covering the entire surface.Customers searched for: MossBase, Shroomroom MossBase, moss back wall terrarium, moss surface modeling, paludarium moss wall, terrascaping moss, attach moss to terrarium, MossMix, moss-covered background

CHF 17.90