JBL TempSet basic - Installation kit for lamps in terrariums

Arcadia LampGuard Pro – Protective grille for your terrarium lightingWith the Arcadia LampGuardPro you can protect your terrarium animals from direct contact with the lighting. The lamp guard prevents animals from touching hot lamps, wrapping themselves around them or sitting on them. At the same time, the guard protects the lamp from direct contact with the animals.The specially designed wire mesh allows as much light and UV radiation as possible to enter the terrarium. According to the manufacturer LampGuardPro reduces the total light output by around 15 %.The chosen mesh design and the glossy coating ensure high light transmission whilst providing protection. You will need four suitable screws for assembly. Thanks to the integrated hinges on both sides, the cage can be opened to change the bulb once two screws have been removed. Multiple cable entry points facilitate cable routing and allow for use with different lighting systems.LampGuardPro is available in six lengths ranging from 410 to 1260 mm. Depending on the version, the protective grille is suitable for T8 lights, T5-HO lights and various Arcadia ProT5 and ShadeDweller systems.All versions are 100 mm wide and 50 mm deep.Your benefits at a glanceProtects animals from direct contact with hot lampsProtects the lighting from direct contact with animalsHigh light transmission thanks to a specially designed wire meshEasy bulb replacement thanks to hinges on both sidesMultiple cable entry points for suitable cable routingCoated, rust-resistant and wipe-clean surfaceSix lengths for different lighting systemsContents:LampGuardPro protective grille in the selected lengthInstructions for useChoose a protective grille that is suitable for your light fitting and its dimensions.CompatibilityLength: 410 mm > suitable for: ShadeDwellerPro (8W), MiniT5 (8W), T8 Standard (14W)Length: 510 mm > suitable for: T8 Standard 15 W Length: 660 mm > suitable for: T8 Standard 18/20 W, T5 High Output/ProT5 24 W, ShadeDwellerMax 14 W Length: 810 mm > suitable for: T8 Standard 25 WLength: 960 mm > suitable for:  T8 Standard 30 W, T5 High Output/ProT5 39 W Length: 1260 mm > suitable for: T8 Standard 36/38/40 W, T5 High Output/ProT5 54 WWidth and depth for all variants: 100 × 50 mm. Secure the lamp guard with four suitable screws and feed the cables through the designated openings. Disconnect the lighting from the mains before installation, cleaning or changing the lamp, and allow the lamp to cool down. Wipe the grille clean as required to ensure that deposits affect light transmission as little as possible.Zoo Roco Tip:  Before purchasing, check the exact model name and length of your light fitting. A protective grille does not replace the prescribed distances from the lighting. When setting up your enclosure, also bear in mind that even a light-transmitting grille blocks some of the UV radiation.

Arcadia LumenIZE Swing-Holder® Set by RebieWith the Arcadia LumenIZE Swing-Holder® set from Rebie, you can adjust the angle of your compatible terrarium lighting. This allows you to direct the light precisely onto the desired area and adapt the lighting to the layout of your terrarium. The brackets can be fitted quickly and easily.Your benefits at a glanceAdjustable tilt for precise light directionQuick and easy installationSuitable for all lengths of the Arcadia, LumenIZE T5 UV and Arcadia ProT5Also suitable for Arcadia nd Jungle Dawn LEDSuitable for the following Arcadia lights:LumenIZE T5 UVJungle Dawn LEDProT5Please note: These brackets are designed for the luminaires listed above. Please check the model number of your luminaire before purchasing.

Heat Lamp CageArcadia’s ‘Heat Lamp Safety Cage’ is a user-friendly, stylish product that simply slips over a lamp and a lamp holder (Ceramic Lamp Holder Pro).Heat lamp safety cages help to reduce the risk of burns and are therefore an essential accessory for all heat lamps used in a terrarium. The cage features a spring-loaded door at the bottom, which allows for easy lamp replacement, as well as flat eyelets for securing screws.The cage also has an opening for the power cable, ensuring everything stays neat and tidy. Remember to always use a suitable thermostat control system with the heating system and cage to both protect the animal and the keeper. 

Hobby UV-B Quick test With this test, you can easily and quickly see whether your source of UV-B rays continues to radiate them. To test this hold the card approximately 5 cm under the lamp and wait 10 seconds. A part of the card will change from white to purple, depending on the intensity of discolouration you can tell the strength of your UV rays. According to the manufacturer, this card can be used up to 500 times. Warning! Replace your UV-lamp at least yearly if not more often, this card should be used as an indicator to do so.

The Night Sky LED set imitates the light of the moon and makes nocturnal observations of reptiles and amphibians possible, without disturbing the animals perfect for nighttime viewing crates confortable night ambience no distrubance for the animals low power consumption no heat developement extendable installation in terrarium ceiling widespread illumination of the vivarium PnP connetors for easy installation Advantages of the LED technology are low energy consumption, low heat emission and a long life of the light emitting diodes. Therefore, illuminating terrariums all night long is possible, without hindering the natural nocturnal drop of temperature as with other light sources. Especially nightlight incandescent lamps consume a lot of energy and consequently produce a lot of unwanted heat as well. In addition their ability to illuminate the terrarium properly and allow nighttime viewing is limited.The energy consumption of the LEDs in the Night Sky LED set is merely 0,2W per LED. This is the most energy efficient way to illuminate a terrarium at night. The Night Sky LED set contains 3 moonlight LEDs and an electric transformer, with which up to 6 LEDs can be powered. Additional LEDs are available separately. The LEDs are connected to the transformer by a connector, which makes them easy to install. Mounted on the ceiling of a terrarium, they enable a well-balanced nocturnal illumination of the whole terrarium.

Zoo Med Reptisun T5 HO Terrarium Hood Lighting Unit with special reflector for more light output integrated ballast (starter) with switch (on/off function) for T5 fluorescent tubes Installation: The light can simply be placed on top of the terrarium (gauze or ventilation grille). Glass prevents UV rays from penetrating).We recommend controlling the light using a timer. Note: The unit comes without suitable T5 tubes. These must be ordered separately. We have the 10.0 tubes in our range, which according to the manufacturer are suitable for desert terrariums. As the UV rays decrease very quickly and are no longer measurable after just a few 10 cm, the 10.0 can be used for all animal species. Zoo Med Reptisun T5 HO Hood Lighting Unit, 62 cm x 11 cm x 3 cm for 1 x 24 Watt, 55 cm HO T5 fluorescent tubeZoo Med Reptisun T5 HO Hood Lighting Unit, 80 cm x 11 cm x 3 cm for 1 x 24 Watt, 55 cm HO T5 fluorescent tubeZoo Med Reptisun T5 HO Hood Lighting Unit, 100 cm x11 cm x 3 cm for 1 x 39 Watt, 86 cm HO T5 fluorescent tube

The popular Thermo Socket plus Reflector is also available as MINI Version, fitting for all Halogen Sun Mini, Amphib Sun Mini and the Moon Lamp. Mini porcelain lampholder use for lamps up tp 60W The porcelain lampholder is completely covered by the reflector, ensuring a nice optical appearance. The luminaire can be used for lamps up to 60W but regular spot lamps can stand out of the reflector so that the wire mesh guard cannot be fitted anymore. Halogen Sun Mini and Co. are fitting perfectly!

Lucky Reptile Thermo Socket PRO - Suspension lamp holder for use lamps up to 300W ready for use no electrical installations necessary compatible to the Bright Control Contrary to the simple Thermo Socket lampholder sets the Thermo Socket PRO are completely wired and ready for use. There are no electrical installations necessary.Special mounting accessories and a connector allow the terrarium installation without the need to take the lampholder apart. The Thermo Socket PRO are also excellent for use with the Lucky Reptile Bright Sun UV lamps as their connector are compatible to the Bright Control ballasts which can simply be attached between lampholder and wall socket.The power lead has a silicon insulation allowing the use of lamps up to 300W including the Osram Vitalux.Of course the Thermo Socket PRO are also compatible to the Lucky Reptile Reflector Sets. The Plug and Play solution! Most Popular Model: with hinge! Lampholder can be directed as desired!  

Swing mount for Jungle Dawn LED These brackets are compatible exclusively with Arcadia ProT5 lighting. They allow you to tilt the light at five different angles and direct the light precisely onto the desired area. Installation is quick and easy.Material: plastic

Thermo Socket PRO - lamp holder with hinge - Ready to use vivarium lamp with porcelain lamp holder Already wired, thanks to special mounting accessoires and an connetcor the lampholder can be installed inside the vivarium without having to take it apart With high quality silicon power cable for lamps up to 300W Can be used for incandescent lamps, spot lamps ans UV lamps with E27 Socket Siutale for use with Lucky Reptile Bright Sun UV (ballast required) Connector are compatible to Lucky Reptile Bright Control range Contrary to the simple Thermo Socket lampholder sets the Thermo Socket PRO are completely wired and ready for use. There are no electrical installations necessary.Special mounting accessories and a connector allow the terrarium installation without the need to take the lampholder apart. The Thermo Socket PRO are also excellent for use with the Lucky Reptile Bright Sun UV lamps as their connector are compatible to the Bright Control ballasts which can simply be attached between lampholder and wall socket.The power lead has a silicon insulation allowing the use of lamps up to 300W including the Osram Vitalux.Of course the Thermo Socket PRO are also compatible to the Lucky Reptile Reflector Sets. The Plug and Play solution! Most Popular Model: with hinge! Lampholder can be directed as desired!

Amazonas Lamp Basket -The special metal protective grille supports the dissipation of heat and protects the animal from contact with the air. Prevents contact of reptiles with bulbs Protects against burning For fixed installation in the terrarium incl. screws to 160W Size: 14.5x14.5x14.5cm

Exo Terra Compact Top - Terrarium cover Supplied with built-in reflector but without bulb Suitable for Exo Terra terrarium lamps or incandescent lamps up to 26 W With built-in reflector Easy to install Recess for installing accessories The Exo Terra Compact Top is a compact terrarium lamp cover designed for the Exo Terra glass terrarium. The easy-to-install cover accommodates terrarium lamps or low wattage incandescent lamps. You can use a combination of different Exo Terra Repti Glo terrarium bulbs (PT2226 / PT2227 / PT2228) to achieve the ideal proportions of ultraviolet and visible light. A bulb such as the Daytime Heat Lamp increases the ambient air temperature. Additional accessories such as the digital Exo Terra thermometer or hygrometer and the Exo Terra thermostat or hygrostat can be slid into a special recess on the cover.