Super naon rain - Terrarium misting system

Rainmaker Flex 2.0 irrigation system from ReptoThe Repto Rainmaker Flex 2.0 is a flexible, automatic irrigation system for terrariums, paludariums or special rainforest terrariums. It simulates periods of rain, increases the humidity and creates a natural microclimate for plants and animals. Advantages at a glance Compact & modular design - external water reservoir (e.g. bottle or canister) for easy installation Adjustable spray duration: from 1 second to 99 seconds or from 1 minute to 10 minutes Adjustable interval: by the hour up to 23 hours or by the day up to 30 daysDelivery height - tested up to 2 meters with one nozzle, but can certainly go higher, as it still delivered full power at two meters Supplied with 2 spray nozzles, but can be extended up to 4 Quiet operation 360° rotating nozzles with metal nozzles & flexible mounting (suction cup or grommet) The Repto Rainmaker Flex 2.0 is specially designed for tropical terrariums, paludariums, rainforests or arboreal enclosures (e.g. tree frogs, Phelsuma, Anolis). Its compact design allows it to be connected to an external water reservoir, keeping the system space-saving. The spray duration (1 sec. to 2 min.) and the interval (1 hour to 30 days) as well as a manual spray function can be set using three rotary controls. The device is supplied with two spray nozzles; for larger installations, up to four nozzles can be connected (via standard 4/6 mm hoses). The nozzles can be rotated and have metal nozzles, allowing the water to be distributed evenly. They can be installed either with suction cups or through drilled holes/hose feedthroughs. Operation is quiet enough to be non-intrusive - ideal for simulating periods of rain without loud noises. The Repto Rainmaker Flex 2.0 helps to create optimal humidity levels, promote animal drinking behavior and support plant growth in humid terrariums. An important note: Preferably use decalcified water or osmosis water to avoid limescale formation and blockages. Regular cleaning extends the life of the nozzles. Zoo Roco tip For best results - especially with hard tap water - it is advisable to install a fine filter system or osmosis system upstream. For larger terrariums, it is worth investing in additional extension nozzles (up to 4 nozzles) to ensure even humidification. Install the nozzles so that they do not wet the plants and animals directly, but gently mist them. Customers also searched for: Repto Rainmaker, automatic irrigation system terrarium, rain system rainforest terrarium, spray system terrarium Switzerland, fogging system terrarium, terrarium climate control, reptile climate technology, rain simulation terrarium

Repto Rainmaker extension set with nozzles and hose The Repto Rainmaker extension set is the perfect addition to your automatic irrigation system. With additional nozzles and hose, the humidification in your terrarium or paludarium can be individually extended and optimally adapted. Advantages at a glance Extension set for the Repto Rainmaker 2.0 Contains 4 nozzles with flexible 360° metal nozzles Includes high-quality hose for easy installation Ideal for expanding to larger terrariums or multiple areas With the Repto Rainmaker 2nd extension set (R3300020) you can extend your irrigation system with additional spray points. This means that larger terrariums, paludariums or rainforest setups can also be optimally supplied with moisture.The set includes four robust spray nozzles with flexible 360° metal nozzles that can be individually aligned. This ensures even distribution of the water without directly wetting the animals. The hose supplied enables easy connection to the existing system - without any complicated installation.

Repti Rainforest The Repti Rainforest Sprinkler System is a complete starter kit to equip your terrarium with an automatic watering system.The kit contains1 transformer, 12 volts.3 Adjustable nozzles for mounting on the terrarium.1 water tank.1 water filter. Prevents the nozzles from clogging with dirt.7 metre black water hose. Prevents algae from forming in the hose. 1 multiway distributor for hose connection of up to 3 nozzles. 4 blind plugs 6 bolts1 high-pressure diaphragm pump.

Protective cage for lamps and radiant heaters Increases safety in the terrarium through reliable heat protectionIdeal for everyday use: changing bulbs without major dismantlingFlexible mounting – ideal for various terrarium lids and setupsMore pleasant lighting thanks to the anti-glare screen, without animals being able to touch hot partsThese extremely fine-mesh lamp guard cages reliably protect your reptiles from direct contact with the heat and light source – even small animals cannot get through. Installation is flexible, and the protective cage can be quickly detached from the ceiling panel for lamp replacement. A removable, internal anti-glare shield ensures pleasant lighting without the risk of burns.Available in two sizes:large: Protective cage: 26 x 16 x 16 cm / Mounting plate: 18 x 19 cmsmall: protective cage: 16 x 12 x 12 cm / mounting plate: 14 x 15 cm

Maxi Fogger and humidifierThe compact Fogger & humidifier Maxi is ideal for pets that require a humid environment. Adjustable fogging output (up to 250 ml per hour). Flexible adjustable hose from 45 cm to 150 cm length. Dry run protection, switches off the unit when the tank is empty. Compatible with a wide range of enclosures including vivariums, tanks, cages, terrariums, aquariums, plastic/PVC/acrylic/glass containers.Perfect for a variety of reptiles and amphibians including bearded dragons, geckos, snakes, turtles, iguanas, lizards, chameleons, frogs, crabs, etc.Description of the Fogger & HumidifierRemove all packaging. Place the humidifier base (A) in an accessible place next to your terrarium or inside the area.Before use, unscrew the valve on the black base of the humidifier container (B) and rinse the container with a small amount of soap. Rinse it well until no more soapy water comes out when rinsing.Fill the humidifier container (B) with up to 2 litres of water. Tighten the valve again.Place the humidifier tank (B) on the base (A). Check carefully that the humidifier tank is installed correctly on the base.Plug the larger end of the extendable hose (C) onto the black neck of the humidifier tank.Extend the hose (C) and place the end in/on the top or side of the terrarium. Slide the suction cups down the hose and stick them to the side of the terrarium.Connect the unit. Turn on the switch on the back of the humidifier base (A). Set the control on the front of the unit to the desired output. It may take a few seconds for the output to increase/decrease after adjusting the control.In a fogger and humidifier is:Main unitExtension hoseConnectorTank capSuction cupsWater tankTechnical data:    Maximum power: 32W    Voltage: 220V    Frequency: 50Hz    Maximum capacity: 2,2l    Maximum output 250ml/hInstalling the Fogger and Humidifier MaxiPlace the humidifier horizontally in a suitable place, remove the water tank, unscrew the lid of the water tank and fill it with water. The water temperature must not exceed 40 °C. After filling the water tank completely, remove the water drops and then reattach it to the main unit.Attach the tank cap to the upper part of the water tank. Connect the connector to the water tank lid.Connect the flexible hose to the connector.Attach the suction cups on the glass to flexible hose and adjust the appropriate length of flexible hose.Attach the suction cups to the side or back of the terrarium and point the outlet of the flexible tube towards the inside of the terrarium. Bend the extension tube as little as possible. Damage to the extension tube may result in faulty fogging.Connect the unit to the mains (220/50 Hz) and set the switch on the main unit to the "On" position.Turn the fog output adjustment knob and adjust the fog output according to your needs.The unit is equipped with a low-water cut-out. When the water tank is empty, the sensor switches off the fan and the transformer. As a result, no mist comes out of the flexible hose and the indicator light lights up red. If you want to continue operation, switch off the power and fill the tank with water again.Caution: Do not pour hot water above 40 °C into the water tank to avoid deforming the motor unit. Do not pour water directly into the water tank when the tank is installed on the main unit. Do not pour metal products, chemicals and detergents into the tank.Remove the water from the tank when the ambient temperature is below 0 °C. This could cause frost, which could damage the unit.Do not move the unit while it is in operation. If the appliance is not used for a long time, switch it off and disconnect it from the mains supply

Monsoon SOLO - Irrigation system - 1.5 LProgrammable systemLarge 1.5 liter reservoirReservoir can be easily refilledCan be extended by a spray nozzle and therefore also ideal for two terrariums Mist-like effect Long hoses The system can be programmed to rain several times within 24 hours and over a period of 2 seconds to 2 minutes. The large 1.5 liter reservoir ensures continuous operation for several days without the need to refill water (ideal for the vacation season). In addition, the reservoir can be easily refilled without having to remove the entire system. The Exo Terra® Monsoon SOLO II is equipped with an easy-to-install spray nozzle, but can be extended with an additional spray nozzle, making it ideal for two terrariums. (Please note that each additional nozzle means less power at each individual nozzle). The rain produced by the specially designed spray nozzles is extremely fine and creates a mist-like effect in the terrarium. The extra-long hoses make it possible to hide the system in a storage area or in a cabinet under the terrarium, guaranteeing a realistic effect.