Cover plate holder for aquariums set of 4

SuperFish feeding tube with bowl made of glassWith this long feeding tube made of glass, you can feed shrimp and bottom dwellers of your aquarium specifically. Through the generous opening, you can place sinking food specifically and thus preserve your aquarium water.Feed your shrimp, bottom dwellers and other fish specifically with this long feeding tube.Spacious funnel-shaped tube opening prevents food spillagePrevents the water from being polluted by food remainsSuitable only for sinking foodEasy fixation with suction cupsCrystal clear glassThe glass bowl is the ideal feeding place for messy eating shrimpKeeps the aquarium floor cleanNo food waste, as it is visible how much is being eatenSuitable for freshwater and saltwaterThe feeding tube isavailable in two sizes:30 cm long glass tube with feeding bowl in diameter 6 cm45 cm long glass tube with feeding bowl in diameter 6cmFirst rinse with tap water. Clean regularly, do not use chemicals.Rinse with tap water first. Clean regularly. Never use chemicals to clean..

Söchting oxidizer MiniThe Söchting oxidizer Mini produces normal and activated oxygen in a patented process using the Söchting oxidizer solution and special ceramic catalysts. The activated oxygen breaks down toxins and putrefactive substances, thus improving the water quality and contributing to the well-being of fish and plants. The oxidizer Mini is designed for aquariums up to 60 liters. The oxidizer solution and the catalyst are already included in the delivery (2 x 50 ml).The water temperature indicates the operating time of the catalysts, at 25 degrees Celsius and one catalyst it is approx. four weeks. With two catalysts, it is approx. two weeks. At a higher temperature, the operating time is shortened and vice versa. Because of the drip-wise dosing, at times no oxygen bubbles are visible, although the unit is working. When the glass container is empty, the oxidizer must be refilled. It is best to do this only with the oxidizer solution, which you can buy again. If the oxidizer has been placed on a sandy soil, you should move it occasionally so that the soil under it does not become gammy.Does not need electricity to run.Easy to set up and maintain.Refillable Produces active oxygen for fish and plants.60 l aquariums.If the oxidizer is damaged, there is a risk that the H2O2 will leak out and this is toxic to the animals, so check regularly.

Superfish Aquarium Glue 2-pack Superglue for aquascaping Superfish Aquarium Glue is the ideal instant adhesive for aquascaping and allows you to fix plants, mosses and decorative materials quickly and easily. With just a few drops, you can bond roots, stones and corals securely and firmly - in seconds. The Superfish Aquarium Glue 2-pack ensures easy application and a stable hold so that plants and moss no longer simply drift away. Product features: Ideal for aquascaping: Superfish Aquarium Glue has been specially developed for use in aquariums and is ideal for attaching plants, moss, roots and stones to decorative materials in the aquarium. Easy to use: The superglue is very easy to use - just a few drops are enough to reliably hold plants and moss to stones or roots. The quick drying time makes working in the aquarium much easier and less stressful. Safe for fish and water: Superfish Aquarium Glue is specially designed for use in aquariums and is safe for fish and water. So you don't have to worry about the health of your aquarium inhabitants. Practical 2-pack: The 2-pack of 4g glue is sufficient for many applications and offers good value for money. Perfect for hobby aquarists and professionals who regularly decorate their aquariums. Quick fixation: No more tedious work with needle and thread - the Superfish Aquarium Glue fixes plants and moss in seconds so that you can quickly continue with the design of your aquarium. Safety note: Contains cyanoacrylate - take care not to allow the glue to come into contact with skin or eyes. The glue should always be kept out of the reach of children. Zoo Roco tips for use: Use the Superfish Aquarium Glue to fix plants and moss securely to stones or roots without them coming loose. Make sure you only use a few drops and allow the glue to dry for a few seconds. As the glue hardens quickly, you can immediately continue with the next design of your aquarium. Use gloves - the glue also sticks to your fingers!

Dosing tubes 4 pieces for each bottleThese colored dosing tubes are available for the dosing bottles and the dosing systemSize: 19 mm x 3 mm x 27 mm

JBL ProScape Plant Soil - substrate for aquascaping JBL ProScape PlantSoil - Brown or beige freshwater substrate for aquascaping Complete nutrient substrate for aquatic plants: Special substrate for aquascaping aquariums Vital plant growth: Optimum oxygen supply and circulation thanks to medium grain size Immediate plant supply with nutrients and minerals Tropical water values: Slightly acidic pH value and low carbonate hardness. Reduces water hardness - water becomes soft brown or beige Underwater gardenerAquascaping refers to the technique of designing aquarium landscapes. Imaginative plant arrangements, imitations of an above-water landscape or natural habitats can be created. An aquascaping aquarium contains little or no fish and invertebrates. This reduces the nutrient supply for plants and limits their growth. Nitrogen, phosphorus and other minerals become a scarce commodity and must be fertilized in a targeted manner. For healthy plant growth in a beautiful underwater landscape, plants need light, CO2 and the right nutrients. Rich in mineralsProScape Soils are special substrates that have been specially adapted to the needs of aquascapers. Soils are not water-neutral, but have a softening effect. They soften the water and slightly acidify it so that the pH value moves into the slightly acidic range. JBL Plant-Soils are highly nutrient-loaded to provide the plants with nutrients and minerals immediately, whereas ShrimpsSoils are nutrient-poor. Application:Rinse the substrate briefly under tap water to remove any abrasion caused by transportation. To prevent the minerals from accumulating in the water, change 50% of the water every 2 - 3 days for the first two weeks after filling. As the influence on the water values depends on the initial water and the intervals between water changes, the softening effect decreases over time. Calculation formula for the correct amount of substrate: Length (cm) x width (cm) x height (cm) : 1000 = liters of JBL ProScape Plant Soil

SuperFish Digi Test pHDigital ph meter for aquariums and pond water. This digital meter measures ph with an accuracy of up to 0.02 units, has an automatic calibration function and makes measuring ph much easier.Accurate pH meter for aquariums and. pond water.Measures pH from 0 to 14 with an accuracy of up to 0.02 units.The device features an automatic calibration function for 1-point (6.86) and 2-point calibration (4.00 - 9.18).Calibration powder is included.Automatic power off after 5 minutes.UseRemove the protective cap before use.Press the power button. Submerge the pH meter up to the Immersion line into the water. The meter is NOT waterproof, never immerse the Never immerse the meter beyond the immersion line. beyond the immersion line into the water.Wait about 30 seconds until the reading is numerically constant.Read the pH of the water.Rinse the electrode with distilled water. rinse, dry with a cloth and put the protective cap.Avoid heat and direct sunlight. 1-point calibration 6.68 The calibration accuracy is ± 0.1 pHDissolve the pH 6.86 buffer powder in a beaker with 250 ml of distilled 25°C warm water.Dip the pH measuring instrument into the water with the pH 6.86 solution and wait about 30 seconds.Press and hold the CAL button for 5 seconds.The display will begin to flash 6.86. When it stops flashing, the pH meter has been calibrated.Rinse the electrode with distilled water. rinse with distilled water, dry with a cloth and put the Put on the protective cap. 2-point calibration 4.00 and 9.18 The calibration accuracy is ± 0.02 pHDissolve the pH 4.00 buffer powder in a beaker with 250 ml of distilled 25°C warm water. Dissolve the buffer powder pH 9.18 in another beaker.Dip the pH meter into the water with the pH 4.00 solution and wait about 30 seconds.Press and hold the CAL button for 5 seconds.The display will begin to flash 6.86.Press the CAL button briefly immediately.The display will flash 4.00. Wait until the flashing stops.Rinse the electrode with distilled water. water.Now immerse the pH meter in the Water with the pH 9.18 solution and wait about 30 seconds.Press and hold the CAL button for 5 seconds.On the display begins to flash 6.86.Press the CAL button immediately briefly.On the display flashes 4.00. Press the CAL button again immediately.On the display now flashes 9.18. If it stops stops flashing, the pH meter is calibrated.The electrode with distilled water Rinse with distilled water, dry with a cloth and put the protective cap on.Care: Keep the electrode clean and dry. Always close the meter with the protective cap. Warranty 1 year manufacturer's warranty. Damage due to improper use (battery leakage, water damage) is not covered. Lift the proof of purchase for proof of warranty. for proof of warranty. The warranty will be voided without proof of purchase! The batteries supplied free of charge have a life of one year. If they are empty at the time of the empty, you must replace them yourself. replace them yourself.