ME Aquaristic The Glue

  • Low-viscosity superglue
  • For stones and roots
  • For freshwater and saltwater
  • Contents: 20 g
Article no: PL-56005

CHF 6.90

Stock: 0

This article is currently not available

product-image
Order accessories for this item at the same time
CHF 9.90
CHF 9.90
CHF 9.90
CHF 9.90
Product information "ME Aquaristic The Glue"

ME Aquaristic The Glue Hardscape 20 g – Aquarium Adhesive

ME Aquaristic The Glue Hardscape 20 g – low-viscosity instant adhesive for rocks, roots and aquascaping. Suitable for freshwater and marine aquariums.
ME Aquaristic The Glue Hardscape is a fast-setting, low-viscosity instant adhesive specially developed for creating hardscape structures in aquariums. It is ideal for bonding stones, roots and other suitable decorative elements, and enables precise connections when designing aquariums.
Thanks to its low viscosity, the adhesive penetrates even narrow joints and small gaps. This allows hardscape elements to be precisely secured and stable rock and root structures to be created. The rapid bonding makes work easier and enables creative aquascaping ideas to be realised quickly.
Combining it with ME Scapix Hardscape Fibre is particularly practical. The fibre material can be placed at the contact points between stones or roots and then soaked in The Glue Hardscape. This allows smaller gaps to be bridged whilst simultaneously concealing the joints visually.
The adhesive is cyanoacrylate-based and is suitable for hardscape work in freshwater and marine aquariums. The handy 20 g bottle is particularly well-suited to precise detail work, smaller aquascaping projects and repairs.

Your benefits at a glance

  • 20 g of low-viscosity instant adhesive for aquascaping
  • Suitable for freshwater and saltwater aquariums
  • Ideal for bonding stones, roots and decorations
  • Low viscosity for narrow joints and small contact surfaces
  • Fast bonding for precise hardscape joints
  • Supports stable rock and root structures
  • Can be combined with ME Scapix Hardscape Fibre
  • A handy bottle for detailed work and smaller projects

Instructions for use

Clean the stones, roots or decorative elements to be bonded and remove any loose particles. The contact surfaces should be as clean as possible and prepared to fit precisely.
Apply a small amount of ME The Glue Hardscape to the desired joint and press the elements together gently. Hold the joint in place until the adhesive has set sufficiently, and allow it to cure completely before subjecting it to any load.
For larger gaps, the adhesive can be combined with ME Scapix Hardscape Fibre. For heavy or unstable structures, additional suitable support measures are required.

Safety instructions
  • Cyanoacrylate bonds skin and eyelids together within seconds
  • Avoid contact with skin and eyes, and do not inhale the fumes
  • Work in well-ventilated areas and keep the adhesive out of the reach of children
  • Please observe the safety instructions on the original packaging

Zoo Roco Tip

For stable and natural-looking hardscape structures, we recommend combining ME The Glue Hardscape with the colour-coordinated ME Scapix Hardscape Fibre.
Use the grey fibres for grey stones, the brown ones for roots and wood, the red ones for reddish rock, and the light-coloured fibres for sandy-coloured rock formations. This allows you to reinforce specific bonded areas and match them visually to the surrounding materials.
Composition
Feeding recommendation
Technical details
Size information

0 out of 0 reviews

Give us a rating!

Share your experience with the product with other customers.


ME Aquaristic The Glue

ME Aquaristic The Glue

New
ME Aquaristic Scapix Fibre Light/Yellow
ME Aquaristic Scapix Fiber Light/Yellow 350 ml – AquascapingME Aquaristic Scapix Fiber Light/Yellow 350 ml for stabilising and concealing hardscape joints. Ideal for light-coloured stones, sandy tones and aquascaping. ME Aquaristic Scapix Hardscape Fiber Light is a specialised fibre material for designing aquascapes featuring light-coloured stones, sandy tones and natural-looking rock formations. When used in combination with a suitable cyanoacrylate hardscape adhesive it can be used to stabilise and visually conceal small joints between stones, roots and other decorative elements.The light, yellowish-beige shade is particularly suitable for sand-coloured natural stones, light-coloured rock and aquascapes with a pleasant, natural colour scheme. The fibres are placed precisely at the contact points and secured with aquarium adhesive. This allows small joints and visible adhesive points to be discreetly integrated into the surroundings.With a volume of 350 ml, ME Scapix Fiber Light provides sufficient material for numerous small joints and is a practical addition for the creative design of rock and root landscapes in the aquarium.Your benefits at a glance350 ml of light-coloured fibre material for aquascapingHelps to stabilise small hardscape jointsConceals visible adhesive joints between stones and rootsLight colour for natural, unobtrusive transitionsParticularly suitable for beige and sand-coloured stonesCan be applied sparingly and precisely to contact pointsIdeal for light-coloured rock formations and aquascapesCan be used in combination with a suitable cyanoacrylate hardscape adhesiveImportant noteA suitable cyanoacrylate hardscape adhesive is available separatelyInstructions for usePlace a small amount of Scapix Fiber Light at the desired joint between stones, roots or other hardscape elements. Then add a suitable cyanoacrylate hardscape adhesive and secure the materials in accordance with the adhesive manufacturer’s instructions for use.Allow the bonded joint to cure completely and check its stability. Remove any loose fibres and adhesive residue before filling the aquarium or adding the decoration.Use the fibre material sparingly and match the colour as closely as possible to the surrounding stones. Scapix Fiber is not a substitute for adhesive and is not intended for use on its own to secure heavy or unstable rock structures. Zoo Roco TipIn light-coloured aquascapes featuring sand-coloured or beige natural stones, dark adhesive joints can be particularly noticeable. ME Scapix Fiber Light allows these to be better colour-matched to the surrounding materials.Use the light-coloured fibre material together with a suitable cyanoacrylate hardscape adhesive, such as ME The Glue Hardscape. This creates subtle joints, particularly with light-coloured rock structures and sand-coloured rock landscapes, which blend harmoniously into the aquascape.

CHF 9.90

New
ME Aquaristic Scapix Fibre Red
ME Aquaristic Scapix Fiber Red 350 ml – AquascapingME Aquaristic Scapix Fiber Red 350 ml for stabilising and concealing hardscape adhesive joints. Ideal for reddish stones, clay-effect materials and roots.ME Aquaristic Scapix Hardscape Fiber Red is a specialized fiber material for aquascape design. When used in combination with a suitable cyanoacrylate hardscape adhesive, it can be used to stabilize and visually conceal small joints between stones, roots and other decorative elements. This creates natural transitions where visible adhesive joints are less noticeable.The warm red hue is particularly suitable for reddish natural stones, clay-effect rocks and warm-coloured wood and root structures. The fibres can be precisely positioned at contact points and secured with cyanoacrylate hardscape adhesive. This allows smaller gaps to be bridged and joints to be harmoniously integrated into the hardscape.The handy 350 ml pack provides enough fiber material for numerous applications. ME Scapix Fiber Red is therefore an ideal addition to creative aquascaping projects and naturally designed rock and root landscapes. Your benefits at a glance350 ml red fibre material for aquascapingHelps to stabilise small hardscape jointsConceals visible adhesive joints between stones and rootsA warm red tone for harmonious transitionsParticularly suitable for reddish stones and clay-like finishesCan be applied sparingly and precisely to contact pointsIdeal for natural stone and root structuresCan be used in combination with a suitable cyanoacrylate hardscape adhesive Important noteA suitable cyanoacrylate hardscape adhesive is available separatelyInstructions for usePlace a small amount of ME Scapix Fiber Red at the desired joint between stones, roots or other hardscape elements. Then add a suitable cyanoacrylate hardscape adhesive and secure the materials in accordance with the adhesive manufacturer’s instructions for use.Allow the bonded joint to cure completely and check its stability. Remove any loose fibres and adhesive residue before filling the aquarium or adding the decoration.Use the fibre material sparingly and check the colour appearance before final fixing, as lighting and humidity can affect the colour effect.Scapix Fiber is not a substitute for adhesive and is not intended for use on its own to secure heavy or unstable stone structures. Zoo Roco TipIn aquascapes featuring reddish natural stones or roots in warm brown tones, visible adhesive joints can detract from the overall appearance. With ME Scapix Fiber Red, these can be colour-matched to the surrounding materials.Use the red fibre material, for example, with ‘ Dragon ’ stones or reddish rock types, together with a suitable cyanoacrylate hardscape adhesive such as ME The Glue Hardscape. This allows small contact points to be stabilised and made visually inconspicuous.

CHF 9.90

New
ME Aquaristic Scapix Fibre Brown
ME Aquaristic Scapix Fibre Brown 350 ml – AquascapingME Aquaristic Scapix Fibre Brown 350 ml for securing and concealing hardscape joints. Ideal for roots, wood and natural-looking aquascapes.ME Aquaristic Scapix Hardscape Fiber Brown is a specialised fiber material for aquascape design. When used in combination with a suitable cyanoacrylate hardscape adhesive, it allows small joints between roots, stones and other decorative elements to be secured and visually concealed. This creates natural transitions without the adhesive joints detracting from the overall appearance of the aquarium.The earthy brown shade is particularly suitable for wood, roots, bark textures and dark types of rock. The fibres can be placed precisely at the desired contact points and fixed with aquarium adhesive. This allows even smaller gaps to be bridged and inconspicuous joints to be created.The handy 350 ml pack provides enough fibre material for numerous applications. ME Scapix Fibre Brown is therefore an ideal addition to creative aquascaping projects and natural-looking underwater landscapes.Your benefits at a glance350 ml of brown fibre material for aquascapingHelps to secure small hardscape jointsConceals visible glue joints between roots and stonesNatural brown shade for harmonious transitionsParticularly suitable for wood, roots and dark stonesCan be applied sparingly and precisely to contact pointsIdeal for natural-looking aquascapes and root structuresCan be used in combination with a suitable cyanoacrylate hardscape adhesive Important noteA suitable cyanoacrylate hardscape adhesive is available separatelyInstructions for usePlace a small amount of Scapix Fiber Brown at the desired joining point between roots, stones or other hardscape elements. Then add a suitable cyanoacrylate hardscape adhesive and secure the materials in accordance with the adhesive manufacturer’s instructions for use.Allow the bonded joint to cure completely and check its stability. Remove any loose fibres and adhesive residue before filling the aquarium or adding the decoration.Use the fibre material sparingly. Scapix Fibre is not a substitute for adhesive and is not intended for use on its own to secure heavy or unstable rock structures. Zoo Roco TipIn natural-looking aquascapes with lots of roots and wooden structures, visible glue joints can detract from the overall appearance. With ME Scapix Fibre Brown, these can be colour-matched to the surrounding materials.Use Scapix Fibre Brown together with a suitable cyanoacrylate hardscape adhesive, such as SF Aquarium Glue 50g. This creates inconspicuous joints, particularly with branched root structures, which blend harmoniously into the design

CHF 9.90

New
ME Aquaristic Scapix Fibre Grey
ME Aquaristic Scapix Fibre Grey 350 ml – AquascapingME Aquaristic Scapix Fibre Grey 350 ml for concealing and securing hardscape joints. Ideal for grey stones, roots and natural aquascapes.ME Aquaristic Scapix Hardscape Fibre Grey is a specialised fibre material for designing and securing hardscape elements in the aquarium. When used in combination with a suitable cyanoacrylate hardscape adhesive, stones, roots and other decorative elements can be bonded together. The fibres help to refine small contact points and ensure that visible adhesive joints are integrated as discreetly as possible into the aquascape.The natural grey shade is particularly suitable for grey aquarium stones, slate-effect materials and darker rock structures. This allows bonded areas to be colour-matched to their surroundings, creating a harmonious and natural-looking overall appearance.The fibres can be precisely positioned at the desired joints and fixed in place using a suitable cyanoacrylate hardscape adhesive. Scapix Fiber makes it easier to create stable and visually appealing hardscape structures, particularly for complex rock formations or bespoke aquascaping projects.The handy 350 ml pack provides enough fibre material for numerous small bonding areas and is an ideal addition for creative aquarium design.Your benefits at a glance350 ml grey fibre material for aquascapingSupports securing hardscape jointsConceals visible adhesive joints between stones and rootsA natural shade of grey for harmonious transitionsParticularly suitable for grey stones and a slate-like appearanceCan be applied sparingly and in specific areas Ideal for customised stone and root structuresCan be used in combination with a suitable cyanoacrylate hardscape adhesiveImportant noteA suitable cyanoacrylate hardscape adhesive is available separatelyInstructions for usePlace a small amount of ME Scapix Fiber at the desired joint between stones, roots or other hardscape elements. Then add a suitable cyanoacrylate hardscape adhesive and secure the materials in accordance with the adhesive manufacturer’s instructions for use.Allow the joint to cure completely and check its stability. Remove all loose fibres and adhesive residues before putting the aquarium into operation.Use only as much fibre material as is necessary. The fibres do not replace the adhesive, but serve as an aid to bonding and to visually conceal the bonded areas. Zoo Roco TipIn aquascaping, visible adhesive joints between stones and roots are often unsightly. With ME Scapix Fibre Grey, these can be colour-matched to the surrounding hardscape materials.Use the grey fibre material particularly for stone structures made of grey natural stone or slate. Use it with a suitable cyanoacrylate hardscape adhesive. This allows small contact points to be finished precisely and made as inconspicuous as possible.For larger or heavier stone structures, stability must also be ensured by means of a suitable framework.

CHF 9.90

Suggested products

New
ME Aquaristic Scapix Fibre Red
ME Aquaristic Scapix Fiber Red 350 ml – AquascapingME Aquaristic Scapix Fiber Red 350 ml for stabilising and concealing hardscape adhesive joints. Ideal for reddish stones, clay-effect materials and roots.ME Aquaristic Scapix Hardscape Fiber Red is a specialized fiber material for aquascape design. When used in combination with a suitable cyanoacrylate hardscape adhesive, it can be used to stabilize and visually conceal small joints between stones, roots and other decorative elements. This creates natural transitions where visible adhesive joints are less noticeable.The warm red hue is particularly suitable for reddish natural stones, clay-effect rocks and warm-coloured wood and root structures. The fibres can be precisely positioned at contact points and secured with cyanoacrylate hardscape adhesive. This allows smaller gaps to be bridged and joints to be harmoniously integrated into the hardscape.The handy 350 ml pack provides enough fiber material for numerous applications. ME Scapix Fiber Red is therefore an ideal addition to creative aquascaping projects and naturally designed rock and root landscapes. Your benefits at a glance350 ml red fibre material for aquascapingHelps to stabilise small hardscape jointsConceals visible adhesive joints between stones and rootsA warm red tone for harmonious transitionsParticularly suitable for reddish stones and clay-like finishesCan be applied sparingly and precisely to contact pointsIdeal for natural stone and root structuresCan be used in combination with a suitable cyanoacrylate hardscape adhesive Important noteA suitable cyanoacrylate hardscape adhesive is available separatelyInstructions for usePlace a small amount of ME Scapix Fiber Red at the desired joint between stones, roots or other hardscape elements. Then add a suitable cyanoacrylate hardscape adhesive and secure the materials in accordance with the adhesive manufacturer’s instructions for use.Allow the bonded joint to cure completely and check its stability. Remove any loose fibres and adhesive residue before filling the aquarium or adding the decoration.Use the fibre material sparingly and check the colour appearance before final fixing, as lighting and humidity can affect the colour effect.Scapix Fiber is not a substitute for adhesive and is not intended for use on its own to secure heavy or unstable stone structures. Zoo Roco TipIn aquascapes featuring reddish natural stones or roots in warm brown tones, visible adhesive joints can detract from the overall appearance. With ME Scapix Fiber Red, these can be colour-matched to the surrounding materials.Use the red fibre material, for example, with ‘ Dragon ’ stones or reddish rock types, together with a suitable cyanoacrylate hardscape adhesive such as ME The Glue Hardscape. This allows small contact points to be stabilised and made visually inconspicuous.

CHF 9.90

New
ME Aquaristic Scapix Fibre Brown
ME Aquaristic Scapix Fibre Brown 350 ml – AquascapingME Aquaristic Scapix Fibre Brown 350 ml for securing and concealing hardscape joints. Ideal for roots, wood and natural-looking aquascapes.ME Aquaristic Scapix Hardscape Fiber Brown is a specialised fiber material for aquascape design. When used in combination with a suitable cyanoacrylate hardscape adhesive, it allows small joints between roots, stones and other decorative elements to be secured and visually concealed. This creates natural transitions without the adhesive joints detracting from the overall appearance of the aquarium.The earthy brown shade is particularly suitable for wood, roots, bark textures and dark types of rock. The fibres can be placed precisely at the desired contact points and fixed with aquarium adhesive. This allows even smaller gaps to be bridged and inconspicuous joints to be created.The handy 350 ml pack provides enough fibre material for numerous applications. ME Scapix Fibre Brown is therefore an ideal addition to creative aquascaping projects and natural-looking underwater landscapes.Your benefits at a glance350 ml of brown fibre material for aquascapingHelps to secure small hardscape jointsConceals visible glue joints between roots and stonesNatural brown shade for harmonious transitionsParticularly suitable for wood, roots and dark stonesCan be applied sparingly and precisely to contact pointsIdeal for natural-looking aquascapes and root structuresCan be used in combination with a suitable cyanoacrylate hardscape adhesive Important noteA suitable cyanoacrylate hardscape adhesive is available separatelyInstructions for usePlace a small amount of Scapix Fiber Brown at the desired joining point between roots, stones or other hardscape elements. Then add a suitable cyanoacrylate hardscape adhesive and secure the materials in accordance with the adhesive manufacturer’s instructions for use.Allow the bonded joint to cure completely and check its stability. Remove any loose fibres and adhesive residue before filling the aquarium or adding the decoration.Use the fibre material sparingly. Scapix Fibre is not a substitute for adhesive and is not intended for use on its own to secure heavy or unstable rock structures. Zoo Roco TipIn natural-looking aquascapes with lots of roots and wooden structures, visible glue joints can detract from the overall appearance. With ME Scapix Fibre Brown, these can be colour-matched to the surrounding materials.Use Scapix Fibre Brown together with a suitable cyanoacrylate hardscape adhesive, such as SF Aquarium Glue 50g. This creates inconspicuous joints, particularly with branched root structures, which blend harmoniously into the design

CHF 9.90

New
ME Aquaristic Scapix Fibre Grey
ME Aquaristic Scapix Fibre Grey 350 ml – AquascapingME Aquaristic Scapix Fibre Grey 350 ml for concealing and securing hardscape joints. Ideal for grey stones, roots and natural aquascapes.ME Aquaristic Scapix Hardscape Fibre Grey is a specialised fibre material for designing and securing hardscape elements in the aquarium. When used in combination with a suitable cyanoacrylate hardscape adhesive, stones, roots and other decorative elements can be bonded together. The fibres help to refine small contact points and ensure that visible adhesive joints are integrated as discreetly as possible into the aquascape.The natural grey shade is particularly suitable for grey aquarium stones, slate-effect materials and darker rock structures. This allows bonded areas to be colour-matched to their surroundings, creating a harmonious and natural-looking overall appearance.The fibres can be precisely positioned at the desired joints and fixed in place using a suitable cyanoacrylate hardscape adhesive. Scapix Fiber makes it easier to create stable and visually appealing hardscape structures, particularly for complex rock formations or bespoke aquascaping projects.The handy 350 ml pack provides enough fibre material for numerous small bonding areas and is an ideal addition for creative aquarium design.Your benefits at a glance350 ml grey fibre material for aquascapingSupports securing hardscape jointsConceals visible adhesive joints between stones and rootsA natural shade of grey for harmonious transitionsParticularly suitable for grey stones and a slate-like appearanceCan be applied sparingly and in specific areas Ideal for customised stone and root structuresCan be used in combination with a suitable cyanoacrylate hardscape adhesiveImportant noteA suitable cyanoacrylate hardscape adhesive is available separatelyInstructions for usePlace a small amount of ME Scapix Fiber at the desired joint between stones, roots or other hardscape elements. Then add a suitable cyanoacrylate hardscape adhesive and secure the materials in accordance with the adhesive manufacturer’s instructions for use.Allow the joint to cure completely and check its stability. Remove all loose fibres and adhesive residues before putting the aquarium into operation.Use only as much fibre material as is necessary. The fibres do not replace the adhesive, but serve as an aid to bonding and to visually conceal the bonded areas. Zoo Roco TipIn aquascaping, visible adhesive joints between stones and roots are often unsightly. With ME Scapix Fibre Grey, these can be colour-matched to the surrounding hardscape materials.Use the grey fibre material particularly for stone structures made of grey natural stone or slate. Use it with a suitable cyanoacrylate hardscape adhesive. This allows small contact points to be finished precisely and made as inconspicuous as possible.For larger or heavier stone structures, stability must also be ensured by means of a suitable framework.

CHF 9.90

New
SF Aquarium Glue 50 g
SuperFish Aquarium Glue 50 g – Aquarium AdhesiveSuperFish Aquarium Glue 50 g – liquid superglue for aquascaping. Ideal for attaching plants, mosses, stones, roots and corals.SuperFish Aquarium Glue is a liquid superglue specially developed for use in freshwater and saltwater aquariums. It can be used to attach aquarium plants, mosses, roots, stones, ceramics and corals quickly and reliably. The cyanoacrylate-based adhesive cures within a short time and, according to the manufacturer, is suitable for fish and aquarium water.Thanks to its liquid consistency, the adhesive can be applied precisely and is particularly suitable for aquascaping work. Epiphytic plants such as Anubias, Bucephalandra and Java fern can be fixed to roots or rocks without the need for permanent fastening with thread. The adhesive is also a practical aid when constructing rock landscapes or securing mosses.The 50 g bottle provides enough adhesive for numerous applications. It is a practical alternative to small disposable tubes, particularly for larger aquascaping projects. Once opened, the adhesive can be stored for around nine months if kept in the fridge at 5–10 °C.Your benefits at a glance50 g of liquid aquarium glue in a bottleFast-setting cyanoacrylate-based superglueSuitable for freshwater and saltwater aquariumsIdeal for attaching aquarium plants and mossesSuitable for roots, stones, ceramics and coralsPrecise application thanks to its liquid consistencySafe for fish and aquarium waterOnce opened, the product will keep for approx. 9 months if stored correctlyInstructions for useClean the surfaces to be bonded and remove any dirt or loose particles. The contact surfaces should be as flat as possible or fit together precisely. Apply a small amount of ‘ SuperFish ’ Aquarium Glue to one of the surfaces and press the parts together immediately for a few seconds.For best results, the adhesive should be used at room temperature. Allow the bonded joint to set thoroughly before subjecting it to any stress. We recommend gluing decorations outside the aquarium wherever possible.Once opened, seal the bottle tightly and store it in the fridge at 5–10 °C. If stored correctly, the product will keep for approximately nine months after opening.Safety instructionsContains cyanoacrylateSticks skin and eyelids together within secondsCauses skin irritation and severe eye irritationMay irritate the respiratory tractDo not inhale the fumes and only use in a well-ventilated areaKeep out of reach of childrenIn the event of eye contact, rinse carefully with water for several minutes and seek medical assistanceIf the skin comes into contact with a large amount of water, wash it offAlways follow the safety instructions on the original packaging before use.Zoo Roco TipWhen aquascaping, ‘ SuperFish ’ Aquarium Glue can be used to create particularly attractive and stable underwater landscapes.If you wish to join two stones or pieces of root together, place a small piece of filter wool between the contact surfaces and carefully soak it with the adhesive. The filter wool increases the bonding surface area and can ensure a more stable bond.For epiphytic plants such as Anubias or Bucephalandra, a small drop of glue on the root area is usually sufficient. Take care to use as little glue as possible and avoid completely gluing the delicate parts of the plant together.

CHF 11.50

New
ME Aquaristic Scapix Fibre Light/Yellow
ME Aquaristic Scapix Fiber Light/Yellow 350 ml – AquascapingME Aquaristic Scapix Fiber Light/Yellow 350 ml for stabilising and concealing hardscape joints. Ideal for light-coloured stones, sandy tones and aquascaping. ME Aquaristic Scapix Hardscape Fiber Light is a specialised fibre material for designing aquascapes featuring light-coloured stones, sandy tones and natural-looking rock formations. When used in combination with a suitable cyanoacrylate hardscape adhesive it can be used to stabilise and visually conceal small joints between stones, roots and other decorative elements.The light, yellowish-beige shade is particularly suitable for sand-coloured natural stones, light-coloured rock and aquascapes with a pleasant, natural colour scheme. The fibres are placed precisely at the contact points and secured with aquarium adhesive. This allows small joints and visible adhesive points to be discreetly integrated into the surroundings.With a volume of 350 ml, ME Scapix Fiber Light provides sufficient material for numerous small joints and is a practical addition for the creative design of rock and root landscapes in the aquarium.Your benefits at a glance350 ml of light-coloured fibre material for aquascapingHelps to stabilise small hardscape jointsConceals visible adhesive joints between stones and rootsLight colour for natural, unobtrusive transitionsParticularly suitable for beige and sand-coloured stonesCan be applied sparingly and precisely to contact pointsIdeal for light-coloured rock formations and aquascapesCan be used in combination with a suitable cyanoacrylate hardscape adhesiveImportant noteA suitable cyanoacrylate hardscape adhesive is available separatelyInstructions for usePlace a small amount of Scapix Fiber Light at the desired joint between stones, roots or other hardscape elements. Then add a suitable cyanoacrylate hardscape adhesive and secure the materials in accordance with the adhesive manufacturer’s instructions for use.Allow the bonded joint to cure completely and check its stability. Remove any loose fibres and adhesive residue before filling the aquarium or adding the decoration.Use the fibre material sparingly and match the colour as closely as possible to the surrounding stones. Scapix Fiber is not a substitute for adhesive and is not intended for use on its own to secure heavy or unstable rock structures. Zoo Roco TipIn light-coloured aquascapes featuring sand-coloured or beige natural stones, dark adhesive joints can be particularly noticeable. ME Scapix Fiber Light allows these to be better colour-matched to the surrounding materials.Use the light-coloured fibre material together with a suitable cyanoacrylate hardscape adhesive, such as ME The Glue Hardscape. This creates subtle joints, particularly with light-coloured rock structures and sand-coloured rock landscapes, which blend harmoniously into the aquascape.

CHF 9.90

New
ME Carbo Ultra Flex, CO₂ system (without cylinder)
ME Carbo Ultra Flex – CO₂ system without a cylinder for tanks up to 400 litresME Carbo Ultra Flex CO₂ system (without cylinder) for aquariums up to 400 litres. Includes pressure regulator, solenoid valve, diffuser and continuous CO₂ test. Suitable for disposable and reusable cylinders.The ME Carbo Ultra Flex is a high-quality CO₂ fertilisation system designed to supply aquatic plants with carbon dioxide in a targeted manner. This well-designed system was developed for demanding plant aquariums and aquascapes and is suitable for freshwater aquariums with a volume of up to 400 litres.Carbon dioxide (CO₂) is an important component of photosynthesis, alongside light and nutrients. A CO₂ supply tailored to your plants’ needs supports healthy plant growth, strong leaves and vibrant plant colours. Controlled CO₂ fertilisation can make a significant difference, particularly in heavily planted aquariums with powerful lighting.At the heart of the system is the ME Regulator Ultra pressure reducer with an integrated solenoid valve. It allows for precise adjustment of the CO₂ supply and offers the option of automatically interrupting the gas supply during the night. The solenoid valve can, for example, be connected to a timer for this purpose.The integrated bubble counter with non-return valve makes it easier to monitor the CO₂ dosage. The desired number of bubbles can be set using the fine-adjustment needle valve, whilst two pressure gauges display the cylinder pressure and the set operating pressure.The CO₂ Diffuser Pro L, included as standard, ensures the fine distribution of carbon dioxide in the aquarium. It releases the gas into the water in the form of tiny bubbles, thereby promoting the most efficient possible dissolution of CO₂.To monitor the CO₂ concentration, the set includes a CO₂ Check Glass continuous test kit with 15 ml of test liquid. The colour change of the indicator liquid allows for easy monitoring and helps you adjust the CO₂ supply to the actual needs of your aquatic plants.A particular advantage of the ME Carbo Ultra Flex is its flexibility. Thanks to the adapter supplied, the system can be used with both suitable disposable CO₂ cylinders and reusable cylinders. This allows the system to be adapted to different aquarium sizes and existing CO₂ set-ups.The ME Carbo Ultra Flex offers a convenient solution for aquarists who value a precise, reliable and individually adjustable CO₂ supply.Important: The CO₂ cylinder is not included and must be purchased separately.Your benefits at a glance1 CO₂ fertiliser system ( cylinder not included)Suitable for planted freshwater aquariums up to 400 litresRegulator Ultra pressure reducer with dual pressure gaugeIntegrated solenoid valve for automatic night-time shut-offBubble counter with non-return valve and precise fine-needle valveDiffuser Pro L for fine CO₂ distribution in the aquariumCO₂ endurance test included, with test fluid for monitoringSuitable for use with compatible disposable and reusable CO₂ cylindersContents of the packME Regulator Ultra pressure regulator with integrated solenoid valveCO₂ Diffuser Pro LFlexTube CO₂ hose, 2 m longAdapter for use with disposable cylindersCO₂ Check Glass Long-Term Test15 ml CO₂ test solutionInstructions for usePlace a suitable disposable or reusable CO₂ cylinder upright in a safe and well-ventilated location near the aquarium. The cylinder must be secured to prevent it from falling over.Fit the Regulator Ultra pressure reducer to the CO₂ cylinder in accordance with the enclosed operating instructions. If necessary, use the supplied adapter for disposable cylinders.Connect the pressure reducer to the Diffuser Pro L using the CO₂ hose. Position the diffuser as low as possible in the aquarium, in an area with sufficient water movement, so that the carbon dioxide is distributed effectively throughout the water.Next, adjust the operating pressure and CO₂ dosage using the fine-control needle valve. Start with a low bubble count and gradually increase the supply in line with your plants’ requirements.The included CO₂ continuous test kit indicates the approximate CO₂ concentration in the water via the colour change of the test liquid. Check the value regularly and adjust the dosage as required.The integrated solenoid valve can be connected to a suitable timer to automatically interrupt the CO₂ supply during the night.Important safety instructionsAlways position CO₂ cylinders upright and secure them to prevent them from falling overOnly use suitable and approved CO₂ cylindersCheck the connections for leaks before commissioningDo not use oil- or grease-based lubricants on pressure connectionsAdjust the CO₂ supply slowly and in a controlled mannerMonitor the CO₂ concentration regularlyProtect your fish immediately if there are signs of CO₂ overdoseShut off the gas supply and disconnect the power supply before carrying out any maintenance workZoo Roco TipA well-balanced CO₂ supply is particularly important in heavily planted aquariums and demanding aquascapes. To ensure your aquatic plants can grow optimally, the lighting, CO₂ and nutrient supply should be as well-balanced as possible.For many planted community aquariums, the target CO₂ level is around 20–30 mg/l, provided that the fish and shrimp population can tolerate this concentration. Check the levels regularly using the continuous test kit supplied.Our tip: Connect the built-in solenoid valve to a timer and synchronise the CO₂ supply with the lighting schedule. This allows you to conveniently control the supply to your plants and avoid unnecessary CO₂ addition during the night.Thanks to its flexible connection options, the ME Carbo Ultra Flex is particularly suitable for aquarists who already own a suitable CO₂ cylinder or wish to switch between disposable and refillable cylinders at a later date.

CHF 189.00

New
ME Carbo 600 Basic, CO₂ system, 600 g disposable
ME Carbo 600 Basic – CO₂ system with 600g disposable cylinderME Carbo 600 Basic CO₂ system with a 600g disposable cylinder for aquariums up to 100 litres. Complete set including a pressure regulator, CO₂ diffuser and continuous test for vigorous plant growth.The ME Carbo 600 Basic is a practical CO₂ system designed to supply aquatic plants with carbon dioxide. The complete set includes a 600 g disposable CO₂ cylinder, offering a straightforward way to set up CO₂ fertilisation in your aquarium. The system is particularly suitable for planted aquariums and aquascapes up to 100 litres.Carbon dioxide (CO₂) is an important component of photosynthesis, alongside light and nutrients. A CO₂ supply tailored to the plants’ needs supports the growth of aquarium plants and can contribute to stronger plants and more vibrant leaf colours.At the heart of the system is the ME Regulator Basic pressure reducer, which allows you to regulate the CO₂ supply. The included Diffuser Pro S disperses the carbon dioxide into the aquarium water in the form of fine bubbles. This promotes the most efficient possible uptake of CO₂ by the aquatic plants.To make it easy to monitor the CO₂ concentration, a CO₂ Check Glass with the appropriate test solution is included in the scope of delivery. The continuous test uses a colour change to indicate whether the CO₂ level in the aquarium is too low, sufficient or too high. This allows the dosage to be gradually adjusted to the plants’ requirements.The system is supplied with a 600 g disposable CO₂ cylinder, a transparent CO₂ hose and a suitable cylinder adapter. This means that the essential components for getting started with controlled CO₂ fertilisation are already included.The ME Carbo 600 Basic is a practical solution for all aquarists who wish to provide their aquatic plants with a targeted supply of CO₂ without having to set up a complex system.Your benefits at a glance1 complete CO₂ kit including a 600 g disposable cylinderSuitable for planted aquariums up to 100 litresPromotes vigorous and healthy plant growthRegulator Basic pressure reducer for controlled CO₂ supplyDiffuser Pro S for fine CO₂ distribution in the waterContinuous CO₂ test with test solution for easy monitoringIncludes a transparent CO₂ hose and a disposable cylinder adapterIdeal for planted aquariums and aquascapingInstructions for useSet up the ME Carbo 600 Basic CO₂ system in a safe, dry and well-ventilated place near the aquarium. The CO₂ cylinder must be kept upright and secured to prevent it from falling over.Fit the pressure regulator to the CO₂ disposable cylinder using the supplied adapter, in accordance with the manufacturer’s instructions. Then connect the pressure regulator to the Diffuser Pro S via the CO₂ hose.Place the diffuser as low as possible in the aquarium, in a spot with sufficient water movement, so that the CO₂ can disperse well throughout the water.Start with a low CO₂ dosage and increase it gradually in line with the plants’ requirements and the measured water parameters.The CO₂ continuous test strip supplied helps you to monitor the concentration in the aquarium. After each adjustment, allow the test strip sufficient time for the colour change to stabilise.Important notesAlways position the CO₂ cylinder upright and securelyCheck the connections for leaks after installationAdjust the CO₂ dosage slowly and in a controlled mannerCheck the CO₂ level regularly using the continuous testProtect your aquatic animals immediately if there are any signs of CO₂ overdoseDo not refill disposable cylinders yourselfInterrupt the CO₂ supply during the night wherever possibleA suitable CO₂ solenoid valve, available separately, can be used for automatic night-time shutdown.Zoo Roco TipA CO₂ system is a particularly useful addition to aquariums with lots of aquatic plants and stronger lighting. To ensure your plants grow optimally, the lighting, CO₂ supply and nutrient supply should be coordinated.We recommend checking the CO₂ level regularly using the continuous test strip supplied. For many planted community aquariums, a CO₂ range of around 20–30 mg/l is recommended, provided that the fish and shrimp population can tolerate this range.Keep a close eye on your aquarium inhabitants, particularly during the first few days after installation. An excessively high CO₂ concentration can be dangerous for fish and shrimps.For convenient control, we recommend fitting the CO₂ system with a suitable solenoid valve and a timer. This allows the CO₂ supply to be automatically interrupted at night when the plants are not photosynthesising.

CHF 119.00

New
SF River Aquarium 60
SuperFish River Aqua 60 – 28L aquarium with river effectSuperFish River Aqua 60 – a modern 28-litre aquarium with a natural river effect, a 7 W LED spotlight and an integrated filter. Ideal for aquascaping and shrimp.SuperFish ’s River Aqua 60 brings the natural beauty of a flowing stream straight into your home. This modern aquarium combines an elegant design with a rippling water surface and atmospheric light reflections. This creates a fascinating river effect that shows off plants, stones and roots to their best advantage.With a capacity of 28 litres and dimensions of 60 × 23.5 × 25 cm, the River Aqua 60 is ideal for creative aquascaping projects and natural-looking underwater landscapes. The stylish wooden plinth, available with a choice of orange or black legs, gives the aquarium a modern look.A particular highlight is the 7-watt ‘ SuperFish ’ River LED Spot. The lighting is directed at the moving water surface and creates vivid light reflections reminiscent of a natural stream. With three light colours, ten dimming levels and an integrated timer for 3, 9 or 12 hours, the lighting can be customised to suit your needs. The adjustable beam angle allows for targeted illumination of the aquarium landscape.The integrated filter system, together with the Aqua Power 200 pump, ensures water circulation and reliable mechanical and biological filtration. The filter is fitted with filter foam and bio-balls, which trap dirt particles and provide a surface for beneficial filter bacteria to colonise.Thanks to the filter chamber integrated into the side, the equipment remains discreetly in the background whilst remaining easily accessible. There is also a compartment for an optional heating rod. The matching ‘ SuperFish ’ Eco Heater 50 W is available separately.The SuperFish River Aqua 60 is particularly suitable for decorative planted aquariums and aquascapes featuring mosses, roots and stones. With the appropriate set-up and adjusted water parameters, the aquarium can also be used for keeping suitable dwarf shrimp.With its compact design, sophisticated technology and exceptional river effect, the SuperFish River Aqua 60 is a real eye-catcher for living spaces, offices and creative aquascaping projects.Your benefits at a glance1 complete aquarium set with a capacity of 28 litresCompact aquarium dimensions: 60 × 23.5 × 25 cmNatural river effect created by a moving water surface and light reflectionsRiver LED Spot with 7 W, three light colours and ten dimming levelsIntegrated timer with 3, 9 or 12 hours of lighting durationAqua Power 200 pump with integrated side filterMechanical and biological filtration using filter foam and bio-ballsElegant wooden plinth with black and orange legsTechnical specificationsAquarium volume: 28 litresTank dimensions: 60 × 23.5 × 25 cmLED lighting: River LED Spot 7 WLight colours: 3Dimming levels: 10Timer: 3 / 9 / 12 hoursPump: Aqua Power 200Pump capacity: up to 200 l/hFilter system: integrated side filterFilter media: filter foam and bio-ballsCover: GlassHeater compartment: suitable for the SuperFish Eco Heater 50 W (not included)Empty weight: approx. 11.88 kgInstructions for usePlace the SuperFish River Aqua 60 on a stable, level and sufficiently sturdy surface. Use the supplied base and the designated mat to prevent strain on the aquarium floor.Set up the aquarium to your liking with suitable substrate, natural stones, roots and aquatic plants. Ensure that the decorations are securely positioned and that there is sufficient space for water circulation.Install the integrated filter and the Aqua Power 200 pump in accordance with the operating instructions. Position the water outlet so as to create the desired surface movement.The River LED Spot can then be fitted and adjusted to suit your preferences. Select your desired light colour, brightness and lighting duration. The rippling water surface, together with the LED Spot, creates the characteristic river effect.Allow the aquarium to cycle properly before introducing any animals. Check the water parameters regularly, particularly nitrite levels, and only introduce animals once conditions have stabilised.If necessary, clean the filter carefully using water taken from the aquarium to ensure that as many beneficial filter bacteria as possible are preserved. Regular partial water changes also help to maintain good water quality.Zoo Roco TipThe SuperFish River Aqua 60 is particularly appealing to aquascaping enthusiasts who wish to create a natural, small-scale stream landscape.Use a variety of natural stones, fine gravel and delicate roots to enhance the impression of a flowing stream. Dwarf aquatic plants, mosses and epiphytes that can be attached to stones or roots look particularly attractive.The combination of water movement and targeted LED lighting creates fascinating light reflections, which make the aquarium appear particularly lively.Due to its small water volume of 28 litres, we recommend the River Aqua 60 primarily as a planted aquarium or for suitable dwarf shrimps. This tank is not intended for keeping fish on a long-term basis.

CHF 149.00

New
Paludra 60
SuperFish Paludra 60 – Water and land in a planted landscapeWith the SuperFish Paludra 60, you can create a small natural landscape where water and land merge. Combine aquatic plants, emersed plants, roots and stones to create a tropical-inspired eye-catcher in your home.The paludarium measures 60 × 24 × 35.5 cm and has a water capacity of 10 litres. The included Eco LED 44–54 with 17 watts illuminates your planted landscape. An Aqua Power 200 pump ensures water circulation, whilst the integrated filter box with filter sponge mechanically removes suspended particles from the water.The scope of delivery also includes an EVA foam base. It evens out minor unevenness, supports the tank and helps to prevent stress on the glass.The water area can be used provided the water parameters are correct and the setup is suitable for shrimp. The combination of a planted land area and a water area offers you numerous possibilities for a personalised design.Your benefits at a glancePaludarium combining aquatic and terrestrial areasDimensions: 60 × 24 × 35.5 cmWater volume: 10 litresIncludes Eco LED 44–54 with 17 wattsIncludes Aqua Power 200 pumpHandy filter box with filter sponge for mechanical filtrationEVA foam underlay to even out minor unevennessSuitable for planted landscapes and a suitably set-up shrimp areaZoo Roco Tip: Use roots or stones to create a natural transition between water and land. When selecting plants, bear in mind which species can grow permanently underwater and which can grow with their leaves above the water’s surface.

CHF 229.00

WIO Wood Sinking Chips Accent 150 g
WIO Wood Sinking Chips Accent 150 gWIO Wood Sinking Chips Accent 150 g are natural wooden accents made from bark, roots, twigs and wood chips. Ideal for realistic details in aquascapes, biotope aquariums, paludariums and terrariums.WIO Wood Sinking Chips Accent 150 g are natural wooden accents for creating detailed designs in aquariums, paludariums and terrariums. The mixture mimics accumulations of wood as found in riverbeds, along riverbanks and on jungle floors. This allows hardscape transitions, the bases of stones and natural drift lines to be designed particularly realistically. The mixture consists of selected wooden components such as bark, fine roots, twigs and wood chips. After soaking or preparation, the pieces of wood sink and can be placed precisely between stones, on slopes or in small hollows. It is recommended to boil the material for approximately 20 minutes or soak it for 24–72 hours before use, and then introduce it into the tank gradually. As this is a natural wood-based material, tannins may be released. In weakly buffered water, this can affect the pH value. Gradual addition and monitoring of water parameters are therefore particularly advisable where sensitive aquarium inhabitants are present.Your benefits at a glanceNatural wood accents for aquascaping and biotope designImitates accumulations of wood in riverbeds and jungle floorsA mixture of bark, fine roots, twigs and wood chipsSuitable for aquariums, paludariums and terrariumsIdeal for concealing transitions and the bases of rocksAdds depth, structure and natural detailsCan microfauna provide habitat and a food source?Sinks after preparationSuitable for natural-looking layouts and biotope aquariumsContents: 150 gInstructions for useRinse thoroughly before use. For use in the aquarium, it is recommended to boil the Wood Sinking Chips for approx. 20 minutes or soak them for 24–72 hours so that they sink more effectively and any initial release of substances is reduced. Then add them in small quantities in specific locations, for example behind rocks, at the foot of slopes or along natural drift lines.Zoo Roco TipWood Sinking Chips look particularly natural when they are not spread out over a large area, but placed strategically in small clusters – for example, behind rocks, in crevices or at the junctions between sand, soil and hardscape. This creates a naturally developed layout without the aquarium looking overloaded.

CHF 15.90

Tip
Aquarium remote control – Aquael Socket BT Duo
Aquael SOCKET LINK DUO Aquarium ControllerThe Aquael SOCKET LINK DUO is a modern, electronic two-channel controller for the convenient control of electrical devices in your aquarium. Using the Aquael AQU@RIUM mobile app, you can conveniently operate two connected devices remotely and programme individual switch-on and switch-off times down to the second.Benefits at a glanceElectronic two-channel aquarium controllerControl via the Aquael AQU@RIUM mobile appProgramming of switching times down to the secondTwo devices can be controlled independently of one anotherFor devices with a power rating of up to 250 W eachStable Wi-Fi connectionLED display showing the current operating modeIdeal for controlling DAY-&-NIGHT lightingSuitable for flat Type C Euro plugs ConvenientControl whilst on the moveConvenient control of your aquarium equipmentWith the SOCKET LINK DUO, you can automate recurring tasks in your aquarium. The controller is suitable, amongst other things, for controlling:Aquarium lightingFlow and circulation pumpsSolenoid valvesUV sterilisersHeating cablesDosing pumpsOther electrical devices up to 250 W per connectionThe two channels can be programmed individually. This allows you, for example, to switch the lighting and water flow on or off at different times.Ideal for DAY-&-NIGHT lightingThe SOCKET LINK DUO is particularly suitable for aquarium lighting with a DAY-&-NIGHT function. Using the app, you can switch automatically between day and night mode or select the desired operating mode manually at any time.Technical specificationsNumber of channels: 2Maximum power: 250 W per connectionControl: Aquael AQU@RIUM appConnection: Wi-FiTiming control: accurate to the secondPlug compatibility: Type C, flat Euro plugOperating indicator: LEDZoo-Roco tip: Check before connecting whether the device to be controlled has a flat plug of Type C and does not exceed the maximum power of 250 W per channel. The controller requires a stable Wi-Fi connection for remote control. Suitable for: Freshwater and marine aquariums, as well as the automated control of various aquarium equipment.

CHF 59.90

JBL ProScape Soil Mount Aso Black
JBL ProScape Mount Aso Soil black – active substrateJBL ProScape Mount Aso Soil Black is a natural, active volcanic substrate for aquascaping and planted aquariums. It promotes soft, slightly acidic water, provides support for plant roots and ensures a high-contrast aquarium design.JBL ProScape Soil Mount Aso Black is a natural, active volcanic substrate for professional aquascapes and densely planted aquariums. The black soil originates from Mount Aso in Japan and supports near-tropical water conditions with soft, slightly acidic water. At the same time, it provides aquarium plants with a firm hold in the substrate. The porous structure of the volcanic soil ensures good water flow through the substrate. This supplies the plant roots with nutrients, whilst beneficial bacteria that break down pollutants find a large surface area on which to colonise. Furthermore, the substrate can bind colourants and suspended particles, thereby helping to keep the aquarium water clear. The substrate is pre-cleaned, natural and free from sharp edges. This makes it suitable for aquariums with bottom-feeding or burrowing fish. The black colour sets aquarium plants, shrimps and colourful fish off to great effect and creates a natural, high-contrast look in the aquarium.Your benefits at a glanceBlack active soil for aquascaping and planted aquariumsNatural volcanic substrate from Mount Aso in JapanPromotes soft, slightly acidic waterProvides good support for plant rootsPromotes good water flow through the substrateLarge surface area for beneficial bacteriaBinds colourants and suspended solids in the waterCan bind excess nutrients and release them again as requiredPre-cleaned, natural substrateNo sharp edges; also suitable for burrowing fishIdeal for use in combination with JBL ProScape Volcano Powder and under-substrate heatersColour: BlackAvailable sizes3 litres9 litresInstructions for useRinse the soil briefly with tap water before adding it. The substrate can then be added directly to the aquarium and shaped as desired. For professional aquascapes, JBL recommends combining it with JBL ProScape Volcano Powder and substrate heaters.Zoo Roco TipBlack Soil is particularly well suited if you wish to visually highlight vibrant green plants, red stem plants, shrimp or colourful fish. Check the water parameters regularly during the running-in phase, as active Soil can affect water chemistry.

From CHF 24.90