HeatStrip II - Windscreen Heater

Zoo Med Environmental Control Center - 6-way terrarium controller for temperature, humidity & lightThe Zoo Med Environmental Control Center is a comprehensive control unit for the automation of heating/cooling, humidity and lighting in the terrarium. With 6 slots, 2 temperature sensors and 1 humidity sensor as well as alarm and memory functions, it supports stable values and realistic day/night sequences.Advantages: 6 slots for heating, cooling, humidity and timer functions 2 temperature probes + 1 humidity probe for precise control Programmable night setback for natural temperature curves Alarm function for extreme values (temperature/humidity) Memory function for settings in the event of a power failure Total load up to 1850 W (combined, limited per channel)The Zoo Med Environmental Control Center is the central control point for modern terrarium technology. It automates temperature, humidity and lighting and helps to set constant husbandry conditions and a natural day/night rhythm. Ideal for reptiles, amphibians and planted terrariums where reliable control of the technology is crucial. Slots / channels (overview) 1: Dimming Heat - dims a heat source to maintain a constant temperature 2: Heat/Cool - switches heating or cooling depending on the setting 3: Humi/Dehumi - controls humidification or dehumidification (e.g. fogger/ventilation) 4: Timer - switchable with time program (additional consumers) 5 & 6: Day/Night - separate switching for day and night devices (e.g. light/night light) Important note: The dimming channel is not suitable for certain lamp types (e.g. some UV/special lamps). Please observe the manufacturer's instructions for the lamps used.FAQ 1. which terrariums is the control unit suitable for? For most terrarium set-ups with reptiles, amphibians or plant terrariums in which temperature, humidity and light are to be controlled automatically. 2. what exactly can the device control? Depending on the connected devices, it controls heat sources, cooling (e.g. fan), humidification (e.g. fogger/mister), dehumidification/ventilation and lighting via timer and day/night switching. 3. are sensors included in the scope of delivery? Yes, 2 temperature probes and 1 humidity probe are usually included (for immediate commissioning). 4. can a night setback be set? Yes, a night setback can be programmed so that the temperatures behave more naturally at night. 5. will the appliance continue to function after a power failure? The settings remain saved. Depending on the situation, it may be necessary to set the time again so that timer functions run accurately again. 6. do I also need a thermometer/hygrometer? Not necessarily, as the appliance works with probes. However, a separate measuring device may be useful for additional monitoring (e.g. at a different position in the terrarium). 7. which devices should not be operated on the dimming channel? Not every lamp or heat source is dimmable (e.g. certain UV/special lamps). Please always check whether the connected device is approved for dimming - otherwise use the switching channels (Heat/Cool).8. how to position the probes correctly? It is best to position the temperature probes where the target values are relevant (e.g. warm area and cool area). Position the humidity probe so that it does not hang directly in the water jet of a fogger in order to avoid incorrect measurements.

Hobby Waterhole Reptiles and invertebrates always need access to clean and fresh drinking water. But due to evaporation, spillage or soiling of the watering hole, it is sometimes necessary to renew the water several times a day, which is sometimes difficult to manage. With the Waterhole, this is no longer a problem. It permanently supplies the animals with clear, fresh and clean water through a reservoir. Thanks to the transparent reservoir, you can see at a glance whether it needs to be refilled. The stable stand of the Waterhole prevents even larger reptiles from tipping it over easily. With a capacity of approx. 130 ml, the Waterhole offers sufficient capacity to keep the animals well supplied at all times. permanent supply of clear, fresh and clean water stable stand due to large base sufficient capacity for a good supply of the animals Size: 10,5 × 11,0 × 14,5 cm

DRV power supply unit 24 Watt for all HeatStripThe SolarStinger/SolarRaptor DRV2s are universal drivers (power supplies). They can be used to operate SolarRaptor products with a 6-pin connection.They can be combined with the products quickly and easily using the practical plug connections. It is also possible to connect several products via a DRV Y-cable or the control unit CON1 to only one DRV2 of corresponding size.Important when coupling several units:The sum of the power consumption (total wattage) of all connected products must not exceed the maximum output power (watts) of the DRV2 power supply unit!Calculation example:To operate TWO SolarStinger SunStrip III 35 FRESH with 19 watts each, together with ONE CON1 control unit (1 watt), a DRV2 48 W is required