Fan for the terrarium

Arboreal Jelly holderJelly holder for use by arboreal animals (animals that move around in branches and trees). The Jelly holder can hold the weight of 20 grams. Thanks to the suction cup, it is easy to attach the Jelly holder. The transparent surface is made of acrylic and is therefore break and impact resistant. The bowl can also be easily removed from the acrylic and refilled or cleaned.Surface is stableCan hold 20 g / 20 ml8x8x6.2 cm

Maxi Fogger and humidifierThe compact Fogger & humidifier Maxi is ideal for pets that require a humid environment. Adjustable fogging output (up to 250 ml per hour). Flexible adjustable hose from 45 cm to 150 cm length. Dry run protection, switches off the unit when the tank is empty. Compatible with a wide range of enclosures including vivariums, tanks, cages, terrariums, aquariums, plastic/PVC/acrylic/glass containers.Perfect for a variety of reptiles and amphibians including bearded dragons, geckos, snakes, turtles, iguanas, lizards, chameleons, frogs, crabs, etc.Description of the Fogger & HumidifierRemove all packaging. Place the humidifier base (A) in an accessible place next to your terrarium or inside the area.Before use, unscrew the valve on the black base of the humidifier container (B) and rinse the container with a small amount of soap. Rinse it well until no more soapy water comes out when rinsing.Fill the humidifier container (B) with up to 2 litres of water. Tighten the valve again.Place the humidifier tank (B) on the base (A). Check carefully that the humidifier tank is installed correctly on the base.Plug the larger end of the extendable hose (C) onto the black neck of the humidifier tank.Extend the hose (C) and place the end in/on the top or side of the terrarium. Slide the suction cups down the hose and stick them to the side of the terrarium.Connect the unit. Turn on the switch on the back of the humidifier base (A). Set the control on the front of the unit to the desired output. It may take a few seconds for the output to increase/decrease after adjusting the control.In a fogger and humidifier is:Main unitExtension hoseConnectorTank capSuction cupsWater tankTechnical data:    Maximum power: 32W    Voltage: 220V    Frequency: 50Hz    Maximum capacity: 2,2l    Maximum output 250ml/hInstalling the Fogger and Humidifier MaxiPlace the humidifier horizontally in a suitable place, remove the water tank, unscrew the lid of the water tank and fill it with water. The water temperature must not exceed 40 °C. After filling the water tank completely, remove the water drops and then reattach it to the main unit.Attach the tank cap to the upper part of the water tank. Connect the connector to the water tank lid.Connect the flexible hose to the connector.Attach the suction cups on the glass to flexible hose and adjust the appropriate length of flexible hose.Attach the suction cups to the side or back of the terrarium and point the outlet of the flexible tube towards the inside of the terrarium. Bend the extension tube as little as possible. Damage to the extension tube may result in faulty fogging.Connect the unit to the mains (220/50 Hz) and set the switch on the main unit to the "On" position.Turn the fog output adjustment knob and adjust the fog output according to your needs.The unit is equipped with a low-water cut-out. When the water tank is empty, the sensor switches off the fan and the transformer. As a result, no mist comes out of the flexible hose and the indicator light lights up red. If you want to continue operation, switch off the power and fill the tank with water again.Caution: Do not pour hot water above 40 °C into the water tank to avoid deforming the motor unit. Do not pour water directly into the water tank when the tank is installed on the main unit. Do not pour metal products, chemicals and detergents into the tank.Remove the water from the tank when the ambient temperature is below 0 °C. This could cause frost, which could damage the unit.Do not move the unit while it is in operation. If the appliance is not used for a long time, switch it off and disconnect it from the mains supply

Exo Terra Terrarium Mini Fan Quiet, efficient fan for optimal air circulation in the terrarium The Exo Terra Terr arium Mini Fan is a compact, energy-efficient, low-voltage fan specially designed for terrariums. With its virtually silent operation, it ensures optimal ventilation and fresh air circulation, reduces stagnant air and creates a healthy climate for animals and plants. Good air circulation is crucial for the well-being of reptiles, amphibians and tropical plants. The mini fan improves air exchange, prevents condensation and reliably prevents mold and fungal growth.Product features Improved air circulation: Increases the air exchange and ensures continuously fresh, oxygen-rich air in the terrarium. Virtually silent operation: The high-quality 9-blade fan with ball bearing system runs quietly and reliably - ideal for living spaces. Effective humidity regulation: Prevents condensation, reduces stagnant mist and supports a stable humidity level. Natural climate simulation: Can be combined with a timer to realistically simulate day/night cycles and natural humidity fluctuations. Healthy environment: Prevents respiratory infections in animals, prevents anaerobic bacteria from thriving and eliminates unpleasant odors. Plant-friendly: Reduces heat stress, improves nutrient uptake and promotes vigorous plant growth in tropical terrariums. Energy efficient and safe: Only 1 watt power consumption with safe low-voltage operation. Easy to install: Easy to attach to the mesh grille cover with four fixing pins - no tools required. Flexible orientation: Can both direct air into the terrarium and draw it out - depending on the desired climate effect. Durable and versatile: Robust construction and soft silicone cable for flexible positioning. Advantages of the Exo Terra Terrarium Mini FanThe Exo Terra Mini Fan offers numerous advantages for pet owners and plant lovers. It significantly improves the air quality in the terrarium by removing stagnant air and supplying fresh air. The gentle air flow prevents excessive humidity, reduces the risk of mold and ensures a clear view of the terrarium inhabitants. At the same time, it protects animals from respiratory diseases and supports natural behavior through realistic humidity and temperature cycles. Plants also benefit: The even air flow reduces heat stress, promotes growth and boosts vitality. Thanks to its quiet, energy-efficient operation and simple installation, the mini fan is ideal for everyday use - reliable, safe and low-maintenance.Technical data Power: 1 watt Voltage: Low voltage (safe operation) Fan: 9-blade system with ball bearings Noise level: Very quiet Installation: Plug & play with 4 retaining pins Material: High-quality, durable components Connection: Flexible silicone cable, compatible with standard mains adapters

Repti Planet thermometer and hygrometer (digital) Repti Planet thermometer and hygrometer for precise monitoring. Visually very stylish device Digital display ensures precise monitoring of temperature and humidity in the terrarium The measuring range is from 10 °C to 50 °C (50 °F to 122 °F) and 20 % to 90 % humidity Easy to attach with suction cup Size 3x6cmCaution: Never place the device directly next to the heat source or humidifier.