Trixie ceramic infrared heat lamp

Exo Terra PTC Heat Mat - Terrarium heating mat for reptiles, amphibians & invertebratesThe Exo Terra PTC Heat Mat (from 4W to 24W) is the ideal heating solution for all glass terrariums and ensures a constant, safe and energy-efficient heat supply.Thanks to modern PTC carbon fiber technology , it heats up quickly, automatically regulates its maximum temperature and distributes the heat particularly evenly.Sizes: 4 watts - 18 x 10 cm8 watts - 20 x 15 cm16 watts - 30 x 20 cm24 watts - 45 x 20 cmOptimum warmth for terrarium animalsThe heating mat provides a conductive heat source that increases the ambient air temperature and creates a natural heat gradient - perfect for supporting thermoregulation in reptiles, amphibians and invertebrates. This promotes metabolism, appetite, digestion and activity and makes a decisive contribution to the well-being of the animals.Safe, efficient and easy to install.Ideal for all glass terrariumsConstant heat source for day & nightSelf-regulating PTC technology for maximum safetyFast heating with even heat distributionSelf-adhesive backing for permanent hold and optimum heat transferCan be perfectly combined with Exo Terra Basking Spots or a thermostat for precise temperature zonesFor a species-appropriate terrarium environmentThe Exo Terra Heat Mat imitates sun-warmed surfaces found in nature and creates ideal conditions for an active, healthy lifestyle for your terrarium animals.Note: Make sure you create enough cool areas in the terrarium. This will give your animals different temperature zones that they can use to maintain an optimum body temperature.

Repto Radiator in two sizes Efficient terrarium heating without light emission The Repto Radiator is the ideal solution for anyone who wants to heat their terrarium efficiently and without light. This high-quality heating plate for reptiles ensures that the ambient air is heated evenly - just like a classic radiator, only specially developed for use in terrariums.Available in two different sizes:16 watts with dimensions of 15.6x10.0x2.8 cm50 watts with a dimension of 25.6x16.0x2.8 cm ✅ The advantages at a glance: Light-free heat radiation - perfect for day and night animals Energy-efficient & quiet - for constant heat output Compatible with thermostats - ideal in combination with on/off or dimmer thermostat for precise temperature control Safe and reliable - suitable for use on mesh panels(no direct contact with animals or water) Versatile - can be used as the main heater or as a supplement to spotlights With its compact dimensions, the Repto Radiator can be flexibly installed in the terrarium. Whether for bearded dragons, geckos, snakes or other heat-loving reptiles - this terrarium heater without light creates a species-appropriate climate around the clock.

DRV power supply unit 24 Watt for all HeatStripThe SolarStinger/SolarRaptor DRV2s are universal drivers (power supplies). They can be used to operate SolarRaptor products with a 6-pin connection.They can be combined with the products quickly and easily using the practical plug connections. It is also possible to connect several products via a DRV Y-cable or the control unit CON1 to only one DRV2 of corresponding size.Important when coupling several units:The sum of the power consumption (total wattage) of all connected products must not exceed the maximum output power (watts) of the DRV2 power supply unit!Calculation example:To operate TWO SolarStinger SunStrip III 35 FRESH with 19 watts each, together with ONE CON1 control unit (1 watt), a DRV2 48 W is required

HeatStrip II from SolarRaptorWith the HeatStrip from SolarRaptor, a warm breeze blows through your terrarium - putting an end to misted-up windows.Easy installation due to self-adhesive backingAir warmer/window heaterNo more misted up windowsPrevents cold draughtsThe problem of draughts in terrariums is often underestimated: especially with large ventilation areas, it can quickly become too draughty for the animals because colder air is constantly flowing in. Then they only stay directly under the heaters and are thus restricted in their natural behaviour. In the worst cases, this can even lead to respiratory diseases.The SolarRaptor HeatStrip II is a unique heating system. Terrarium owners usually mount the self-adhesive rod directly on the front air inlet of their terrarium. This heats the incoming air and increases the air temperature in the entire terrarium. In addition, the so-called "chimney effect" ensures an overall improved air exchange.The Heatstrip thus ensures a constant supply of fresh and warm air and improves the climate for both the animals and the plants in the terrarium.For owners of a rainforest terrarium, the HeatStrip has another advantage: Rainforest terrariums have high humidity, which is usually produced with the help of sprinkler systems or ultrasonic foggers, so the windows often mist up. This is not only unpleasant for the animals, but also a nuisance for the reptile or amphibian keeper. As the heat source of the HeatStrip is located directly on the front pane, condensation of humidity on the pane is effectively counteracted. This means no misted-up windows and thus always a clear view of the animals.Please note: A DRV power supply unit is required for operation - please order separately.Variants:450mm / 8 Watt750mm / 12 Watt950mm / 16 Watt

Trixie Ceramic infrared heat lamps for terrariums Trixie Ceramic infrared heat lamps for creating the required heat zones in the terrarium ideal for creating the required heat regions in the terrarium Infrared light makes a significant contribution to heat regulation Suitable as a permanent heat source in terrariums Supports the digestive process, promotes well-being and activity Very long service life (up to 10,000 hours) allows the animals to be observed at night without interrupting the 24-hour cycle available in: 50W, 75W, 100W and 150W Notes: Regularly monitor the temperature in the terrarium during the heating phase. To achieve a temperature gradient in the terrarium, place the radiant heater in the right or left third of the terrarium. Protect from splashing water. Risk of burns! Do not touch immediately after switching off! Only use in porcelain sockets!

Heat mat - substrate heater for terrariums Ideal for all glass terrariums For mounting under or on the side of terrariums Conductive heat source for reptiles, amphibians, spiders or for planted terrariums Contributes to thermoregulation, important for metabolism, digestion, appetite and activity Safe, even heat distribution Available in different sizes: XS = 4 Watt (10 x 12.5 cm) S = 8 Watt (20 x 20 cm) M = 16 watts (26.5 x 28 cm) L = 25 watts (27.9 x 43.2 cm)

Lucky Reptile Thermo Mat heating mat for terrariums  Emits infrared radiation Animals and objects are warmed Attachment outside the terrarium, e.g. under the terrarium, on the sides or the ceiling Extra flat for flexible installation Easy installation thanks to self-adhesive backing Special design for optimum heat dissipation Reduces the risk of overheating Lucky Reptile Thermo Mat heating mat, 3 watts, 10 cm x 12.5 cm Lucky Reptile Thermo Mat heating mat, 7 watts, 15 cm x 28 cm Lucky Reptile Thermo Mat heating mat, 14 watts, 28 cm x 28 cm These heating mats emit infrared radiant heat similar to ceramic heaters. The radiation directly warms objects and animals and only slightly increases the air temperature. This makes it easier to achieve and control the temperature gradient necessary for many reptiles in the terrarium. The heating mats are equipped with a self-adhesive film and can therefore be easily installed. Thanks to the radiant heat, these heating mats can be installed not only on the floor but also on the sides or the lid of the terrarium. The special design of the heating mat is characterised by optimum heat distribution and thus reduces the risk of overheating. ATTENTION!Most floor substrates (beech shavings, bark substrates, sawdust etc.) are not suitable for use with underfloor heating. Please inform yourself and in this case install the heating mat on the side of the terrarium. For safety reasons, we recommend only using heating mats with a thermostat.Please observe the instructions for use with the safety notes!

JBL ProTemp S - Safety control heater with protective cage JBL ProTemp S heater for aquariums and terrariums Heater for optimum temperature control of aquariums Simple installation Inserting the heater into the protective cage, selecting the temperature on the setting wheel, inserting into the aquarium, attaching to the inner aquarium pane with suction holders Precise temperature setting: Adjustment dial for temperature selection from 20 - 34°C, control accuracy +/-0.5°C. Optimum temperature transfer: star-shaped ceramic heating element TÜV tested, waterproof - unbreakable safety quartz glass with protective cage. Automatic protective switch-off when water level drops Heater for the aquariumFish adapt to the outside temperature. The vital functions of cold-blooded animals decline with falling temperatures. The correct aquarium temperature is therefore very important to ensure problem-free feeding and a smooth functioning metabolism. Depending on the origin of the fish, the temperature at which they feel comfortable varies. Simple installationPlace the heater in the protective cage supplied. Select the desired temperature on the dial and immerse the heater in the aquarium at least up to the "min. water level" line. Secure with the suction holders. As soon as the heater is connected to the power supply, the indicator light will illuminate. The heater can also be mounted horizontally, e.g. in turtle tanks. Optimum temperature transferThe safety control heater from JBL offers optimum temperature transfer in the range of 20-34°C. A control accuracy of +/- 0.5 °C is guaranteed with the aid of the setting wheel. The maximum achievable temperature depends on the water volume and the temperature difference to the surrounding room. Safety control heaterEmbedded in a protective cage to prevent fish from burning themselves. The heater is waterproof, can be immersed up to 100 cm and is very stable with 2 mm safety quartz glass. If the water level drops or the heater is removed from the water, the safety thermal switch switches off the power supply to protect against overheating. The heater is TÜV-certified. Which size?In an unheated room you need 1 watt per 1 litre of water.If the room is heated, 0.5 watts per litre of water can be calculatedExample:Unheated room: 100 watts are sufficient for a 100 litre aquariumHeated space: 100 watts are sufficient for a 200 litre aquarium

ThermoLux heat mat for terrariums ideal heat mats for terrarium animals and plants heats up to max. 42°C 220V absolutely waterproof only suitable as a local heat source Must not be placed in the terrarium! Available in various sizes: 17x17cm (6 Watt) 25x35cm (15 Watt) 30x50cm (30 Watt)

Heat cable 50WA species-appropriate temperature ratio is one of the most important factors for the well-being, health and vitality of your reptiles.  That's why a heat cable from Repti Planet is an ideal solution. It is installed outside the terrarium and when connected correctly, it provides permanent heat. We recommend using a thermometer to monitor the temperature inside the terrarium. Make sure the temperature is in the right range for your species. A digital infrared thermometer is a good tool to measure the temperature in different parts of the terrarium.Different sizes availableEasy to installUse in conjunction with a thermometerInstall outside the terrariumIdeal for a longer terrarium Caution: DO NOT cut or modify the heating cable in any way. DO NOT expose the plug to water DO NOT immerse the cable in water. Not suitable for use in aquariums or aquatic habitats.DO NOT run the cable over other cable harnesses. DO NOT allow the cable harnesses to run closer than 3 cm to each other.DO NOT connect the unit when the cables are coiled together as this may cause extreme overheating and fire hazard. DO NOT operate the unit with a damaged cable, plug or other component. If the cable shows signs of damage, stop operation immediately.DO NOT alter or modify this product. Consult a qualified electrician if you are unsure of the electrical connection or components.DO NOT encapsulate the cable or bury it in the terrarium substrate.For use with glass terrariums only. DO NOT use with terrariums made of plastic, wood or other materials.Only suitable for indoor use.Keep out of reach of children.The power cable cannot be replaced. If the cable is damaged, the unit should not be used. Avoid sharp bends with a radius of less than 1.3 cm.The electrical connection must always be outside the terrarium. Plug the cable into a socket.Check regularly that the cable is still firmly connected to the glass of the terrarium. Check this at every cleaning cycle or at least once a month and apply new tape if necessary. DO NOT place the terrarium directly on a hot surface.

JBL TerraTemp heating mat for terrariums Ideal heat radiation for animals and plants: Self-adhesive infrared heating mat for terrariums Easy to attach: Self-adhesive to floor, side or ceiling, incl. panelling film for attachment in visible areas Particularly resistant: Extra strong PET film Optimum safety: 2 layers of insulation, electrical connection moulded with special resin, overheating protection Scope of delivery: Heating mat, TerraTemp heatmat, incl. panelling foil Nature as a modelTerrarium animals are warm-blooded animals that are heavily dependent on light, especially on the quality and intensity of light and heat. Activity, food intake, digestion or resting phases are influenced by the alternation of day and night.Ideal heat distributionThe TerraTemp heatmat from JBL provides ideal heat distribution for animals and plants in terrariums. The self-adhesive film can be attached to the floor, side walls or ceiling. The panelling film is used for attaching to visible areas. The extra strong PET film makes the mat particularly resistant. The 2 layers of insulation with overheating protection offer optimum safety.

Lucky Reptile Thermometer Deluxe for terrariumsThermometer Deluxe with 2 external sensorsElectronic Thermometer with 2 external sensors for measuring the temperature in tow different locations. Perfect for temperature monitoring inside the vivariums Measures temperature at two different locations External sensors with 150cm wire Tempareure range -50°C to 70°C This electronic thermometer has two external sensors which allow measuring the temperature in two different spots. The sensors can also be used for measurements in water. The device has a large display for easy readouts and a clock function.