JBL PO4 Phosphate Test sensitive
Article no:
CO-JB24127.00
CHF 25.90
Stock: 2
Available, delivery time: 1-3 days
Pick your accessory
from CHF 18.90
Product information "JBL PO4 Phosphate Test sensitive"
JBL Phosphate Test sensitive - Quick test to determine the phosphate content in fresh and saltwater aquariums and ponds
- Easy and reliable monitoring of the water values of aquariums and ponds.
- Determines the phosphate value to control algae in freshwater and seawater
- Laboratory comparator system to compensate the inherent water colouring: fill plastic cuvette with sample water, add reagents to another cuvette, place both cuvettes in holder, read values on colour chart
- when setting up a new freshwater aquarium: once a week. in case of green algae problems
- Package contents: 1 quick test, Phosphate Test PO4. Contents for approx. 50 measurements. Incl. 2 reagents, 2 glass vials, with screw cap, syringe, dosing spoon, comparator block and colour scale.
Composition
Feeding recommendation
Technical details
Size information
Login
Accessories
Accessories
JBL ProScape NPK Macroelements 3-component
CHF 18.90
JBL ProScape NPK Macroelements - 3-component plant fertiliser for aquascaping
Additional care for plants: supplementary fertiliser with 3 components (N = nitrogen; P = phosphorus; K = potassium) for aquascaping aquariums
Dosing is dependent on intensity of illumination, CO2 supply and consumption.
Thriving plant growth, prevents deficiency symptoms: contains nitrogen as nitrate, phosphorus as phosphate, potassium and magnesium for a controlled and precise increase of the values
Iron and trace elements should be added separately. Check with JBL nitrate, phosphate sensitive and potassium tests
Nitrogen in the form of oxygen compounds (NOx) or hydrogen compounds (amines – NH2) have essential functions in an organism, such as in protein metabolism. Whereas it is more common to find an excess of nitrates and phosphates in aquariums with larger fish populations which, in turn, can lead to algae growth, nitrates are often in scarce supply in planted aquariums due to consumption by the aquatic plants. This limits growth in the tank. As the concentrations of nitrates and phosphates in the drinking waters usually used in aquariums vary considerably, depending on the water supplier, it is advisable to use JBL PO4 Test Set and JBL NO3 Test Set to determine the current phosphate concentration and nitrate concentration of the water before adding the JBL ProScape NPK Macroelements. JBL ProScape NPK Macroelements supplies the tank water with nitrogen and phosphorus in the form of nitrate salts and water-soluble phosphate salts. As a result, the aquatic plants obtain the supply of nitrogen they require. Potassium and magnesium are also added to the water at the same time.
The normal dosage is 5 ml /100 l of water for a very well-lit tank with >= 1 W / l of illumination and 2.5 ml/100 l of water for a tank that is not as well lit. The supply of carbon dioxide must also be considered. The following table shows recommended fertiliser concentrations according to the general conditions of the aquarium.As actual precise consumption cannot be predicted, we recommend regularly checking the nitrate concentration and phosphate concentration with JBL NO3 Test Set or JBL PO4 Test Set, especially prior to each follow-up dose. If the measured phosphate levels and nitrate levels of the tank water are outside the above-mentioned range, it is advisable to use the single-component fertilisers, JBL ProScape N Macroelements, JBL ProScape P Macroelements, JBL ProScape K Macroelements and JBL ProScape Mg Macroelements.
Customers also bought
JBL Ammonium Test NH4
CHF 24.50
Variant:
Test set
|
Variant (2):
Test set
JBL NH4 Ammonium Test - Rapid Test
for determining the ammonium/ammonia content in fresh/sea water aquariums & ponds
Simple and safe control of water values in aquariums/ponds.
Determination of the optimum ammonium/ammonia value for filter control for freshwater and seawater
Laboratory comparator system: fill plastic cuvette with sample water, add reagents to cuvette, place cuvettes in holder, read off values on colour chart, read off in pH-NH4 table how much ammonium turns into toxic ammonia
Duration of use: For new freshwater set-up: 1x daily. For new marine water set-up: 1x weekly. For fish diseases or fish mortality.
1 rapid test, ammonium test NH4. Contents for approx. 50 measurements. Incl. 3 reagents, 2 glass cuvettes with screw cap, syringe, comparator block and colour scale.
Healthy aquarium/healthy pond with near-natural conditionsThe correct water values in the aquarium/pond depend on the fish population and the plants present. Even if the water looks clear, it may be contaminated. If the values are poor, diseases or algae can form in the aquarium/pond. For a healthy aquarium/pond with near-natural conditions, regular monitoring and adjustment of the water values is important.
Why test?The decomposition or mineralisation process of all organic substances in the aquarium and pond takes place via the following stages: Proteins > Ammonium > Nitrite > Nitrate. By measuring the stages, statements can be made about the "functioning" of the aquarium or pond system. If the ammonium or nitrite value is too high, this can lead to a disturbance in the bacterial balance. As a rule, ammonium will not be measurable in a well-maintained aquarium with an efficient biological filter or in a properly designed garden pond. Ammonium is an important plant nutrient and is not normally toxic to fish. Depending on the pH value, however, the ammonium ion can turn into ammonia, which is toxic to fish.
Variants from CHF 13.90
Aqua Rebell Makro Basic NPK
From
CHF 14.90
Plant fertilizer Makro Basic NPK from Aqua RebellAqua Rebell Makro Basic NPK - The all-in-one plant fertilizer for magnificent growthAqua Rebell Makro Basic NPK is a highly effective liquid fertilizer that has been specially developed for aquarium plants to ensure an optimum supply of macronutrients. This combination of nitrogen (N), phosphorus (P) and potassium (K) supports the healthy and vigorous growth of plants and promotes a natural balance in the aquarium.Advantages of Aqua Rebell Makro Basic NPKOptimum nutrient supply - Provides aquarium plants with essential macronutrients for vigorous growth.Improves plant vitality - Promotes rapid regeneration and bright leaf colors.Easy to use - Ideal for beginners and experienced aquarists looking for an uncomplicated fertilizer solution.Prevents deficiency symptoms - Prevents common problems such as yellow leaves or growth disorders.Perfect for aquascaping - Ensures dense, lush plant carpets and healthy stem plants.What makes Makro Basic NPK special?Nitrogen (N): Supports growth and cell division.Phosphorus (P): Promotes energy supply and root growth.Potassium (K): Ensures the stability of cell walls and improves water absorption.This balanced composition makes Makro Basic NPK an indispensable component of the fertilizer system, especially in tanks with dense planting or fast-growing plants.Application & dosageAqua Rebell Makro Basic NPK is easy to dose and ideal for daily use or weekly basic fertilization.Dosage recommendationWith a lot of light (>0.5 watts per liter) with CO2 you need 2ml/day With low light (<0.5 watts per liter) with CO2 you need 1ml/dayWithout CO2 you need 2-4ml/weekAdjust the dosage to the amount of plants, light intensity and CO₂ supply of your aquariumWho is this fertilizer suitable for?Aqua Rebell Makro Basic NPK is ideal for anyone who wants to provide their plants with comprehensive nutrition - from beginners to professionals. It unfolds its full potential especially in well-lit and CO₂-enriched tanks.Our opinion:With Aqua Rebell Makro Basic NPK, you get a powerful plant fertilizer that supplies aquatic plants with all the important macronutrients. Enjoy healthy, magnificent plant growth and a breathtaking underwater landscape in your aquarium.🔹 Buy Aqua Rebell Makro Basic NPK now and transform your aquarium into a green oasis! 🌿
JBL O2 Oxygen Test
CHF 24.90
Variant:
Test set
|
Variant (2):
Test set
JBL Oxygen Test O2 - Quick test to determine the oxygen content in fresh and saltwater aquariums and ponds.
Easy and reliable monitoring of the water values of aquariums and ponds. Determines the ideal oxygen content in freshwater and seawater
Quick test for monitoring the aeration: fill glass vial with sample water, add reagents, read sample value off colour chart
When to use: once a week in newly set up aquariums
1 quick test, Oxygen Test O2. Contents for approx. 50 measurements. Incl. 2 reagents, glass vial with screw cap and colour chart. Refill reagents available separately
Healthy aquarium/healthy pond with conditions close to natureThe right water values are dependent on the fish stock and the plants in the aquarium/pond. Even if the water looks clear it can be contaminated. With bad values diseases or algae can appear in the aquarium/pond. To maintain a healthy aquarium/pond with conditions close to nature it is important to check and adapt the water values regularly.
For each water analysis JBL provides water tests in the form of quick tests or colour change tests. These determine a certain value or several values in one go. With these water tests you can recognise algae problems and negative nitrate, nitrite, potassium, magnesium values etc.
Why test?The well-being of aquarium and pond dwellers and the growth of aquatic plants depend to a large extent on the O2 level being kept as constant as possible. Oxygen is the “elixir of life” for all animal organisms. All animals in the aquarium and pond need oxygen to breathe. But the “invisible helpers” in the aquarium and pond, the bacteria that break down pollutants, also depend on sufficient supplies of oxygen in order to be able to carry out their useful activities. In aquariums and ponds with little or no planting and in marine aquariums the oxygen content always needs to be kept at an adequate balance using technical equipment. The water absorbs oxygen through the water surface. The more the surface is moving the more oxygen is absorbed. In case of dying algae and during the use of many medications the oxygen content in the water needs to be increased.
Variants from CHF 12.90
GioiaJelly
CHF 7.90
Jelly feeding from Gioia for shrimps and fishDiscover GioiaJelly, the new form of feeding for your shrimps and fish! An exclusive innovation that enriches your feeding for shrimps and fish.Ultra practical: a single drop is enough to feed effectively. Complete nutrition: Rich in proteins, vitamins and essential mineralsSuitable for all: Perfect for fish and shrimp. No water wastage: No more leftovers polluting the water.Available in the following varieties:GioiaJelly Artemia is a natural source of protein that gives your fish and shrimp instant energy. Rich in carotenoids, it intensifies their colors while promoting their growth and vitality.GioiaJelly Spirulina is a natural source of energy, rich in proteins, amino acids and iron. Its mineral and vitamin content strengthens the shrimp's shell and promotes healthy moulting and optimal growth.GioiaJelly Ortie - Nettles
are known for their relatively high calcium content, which the shrimps need
shrimps need to build up their shells.50ml per bottleCustomers also searched for: shrimp food, shrimp rearing food, breeding food, spirulina,
JBL water test potassium
CHF 34.90
Variant:
Test set
|
Variant (2):
Test set
JBL K Potassium Test Set - Quick test to determine the potassium content in freshwater
Simple and reliable control of water values.
Checks the freshwater aquarium fertilisation by determining the ideal potassium value
Quick test: fill cuvette with sample water, add reagents, fill turbid sample water into special glass vial until underlying cross is no longer visible, read filled in quantity. This value is equivalent to the potassium content in mg/l
Use with diatom problems
Healthy aquariums with conditions close to natureThe right water values are dependent on the fish stock and the plants in the aquarium. Even if the water looks clear it can be contaminated. With bad values diseases or algae can appear in the aquarium. To maintain a healthy aquarium with conditions close to nature it is important to check and adapt the water values regularly.
For each water analysis JBL provides water tests in the form of quick tests or colour change tests. These determine a certain value or several values in one go. With these water tests you can recognise algae problems and negative nitrate, nitrite, potassium, magnesium values etc.
Why test?Potassium is one of the macroelements which plants in freshwater absorb quickly and effectively within a few hours and can also store for a limited time. Growing plants require more potassium than other elements. As a result, potassium concentrations can drop to a minimum range, causing plant growth to stagnate, even if the aquarium water is fertilised regularly. Potassium levels in mains water are usually too low compared to those in natural biotopes, particularly with relation to calcium and magnesium concentrations.
Variants from CHF 27.50
Dosing pump 1ml Aqua Rebell
CHF 1.30
Aqua Rebell dosing pump 1mlPrecise & simple nutrient dosing for the aquariumThe Aqua Rebell dosing pump 1ml is the ideal accessory for aquarists who want to dose their plant nutrients, fertilizers or other liquids precisely and easily. With a precisely dosed pump stroke of 1 ml per stroke, it enables an even and controlled supply of nutrients to the aquarium.Zoo Roco tip: We recommend using a measuring cup to check how many ml a stroke really is. Based on customer reports, this is not always 1 ml! And this then leads to under- or oversupply of the fertilizer.This can be done in a measuring cup or a small syringe with the ml information.
This is the only way to ensure exact dosing!
The advantages of the Aqua Rebell dosing pump 1ml:Precise dosing - Perfectly matched to liquid fertilizers and other additivesEasy handling - Convenient use for aquarium beginners & professionalsCompatible with Aqua Rebell bottles - Suitable for common fertilizer systemsDurable & robust - High-quality workmanship for a long service lifePerfect for targeted nutrient supplyWith the Aqua Rebell dosing pump 1ml you can precisely dose liquid fertilizers such as Aqua Rebell macro and micro fertilizers, CO₂ boosters or water conditioners. This avoids overdosing and ensures that your aquatic plants receive the optimum amount of nutrients.The dosing pump can simply be screwed onto the bottle and allows the fertilizer to be dosed directly into the aquarium or into a measuring cup. This keeps the aquarium healthy and algae-free at all times!Customers also searched for:
Aqua Rebell dosing pump 1ml, dosing pump aquarium, dosing liquid fertilizer, aquarium fertilizer dosing, Aqua Rebell accessories, nutrient supply aquarium, liquid fertilizer dosing dispenser
Suggested products
Dennerle KCL solvent solution
CHF 8.90
Dennerle KCL solution Ideal care for pH electrodes
The Dennerle KCL solution ensures the long-term storage and care of pH electrodes. With its special formula, it guarantees optimal moisture to prevent drying out and measurement errors. This solution extends the service life of your pH probe and ensures precise and reliable measurement results in your aquarium.
Product benefits
Protection against drying out: Ensures correct storage and prevents pH electrodes from drying out.
Longer service life: Extends the service life of your pH probe through regular use.
Precise measurement results: Helps maintain the measurement accuracy of the pH probe.
Easy to use: Direct application for the long-term functionality of your pH electrode.
High quality: For reliable results – Dennerle stands for certified aquarium quality.
ApplicationFill the Dennerle KCL solution into the storage solution of your pH electrode to keep it moist during storage and extend its service life. Regular use protects against drying out and ensures precise measurement results.
Tip
ARKA pH meter / pH measuring device
CHF 19.90
Digital pH meterThis high-precision instrument has been specially developed for determining the pH value of water. With its user-friendly operation and fast response time, it is a practical tool for anyone who wants to determine the quality of their water.
Whether for the home aquarium, the garden pond, the pool in the garden or for checking osmosis and drinking water - the ARKA myAQUA® pH meter provides reliable measurement results.It is ideal for regular monitoring to ensure the well-being of aquatic life or to guarantee water quality for human consumption. The importance of a balanced pH value cannot be overestimated, as it is one of the key factors in maintaining a healthy water system.The ARKA myAQUA® pH meter makes it easier than ever to keep an eye on this critical parameter. Thanks to its compact size and robust design, it is suitable for both home use and professional applications. The simple handling enables even inexperienced users to take precise measurements and thus actively contribute to the care of their water environment.Measuring range: 0.00 - 14.00 pHMeasuring gradation: 0.01 pHAccuracy: +/- 0.01 pHOperating temperature: 0 - 60 °C
ARKA pH/TDS/EC meter
CHF 49.90
Digital pH/TDS/EC meterThe ARKA myAQUA® pH/TDS/EC meter is an advanced water analysis tool designed for comprehensive and accurate testing of various water quality parameters.It can be used to quickly and accurately measure total dissolved solids (TDS), electrical conductivity (EC), pH and temperature in water and other liquids.Its versatility makes it an indispensable tool for monitoring and maintenance in aquariums, ponds, pools and in the treatment of osmosis and drinking water.Whether it is about the health of aquarium inhabitants, the quality of swimming pool water or the safety of drinking water - the ARKA myAQUA® pH/TDS/EC meter provides reliable data that you can always rely on.Measuring range:pH: 0.00 - 14.00 pH
TDS: 0 - 9999 ppm
EC: 0 - 9999 µS/cmMeasuring gradation:
pH: 0.01 pH
TDS: 1 ppm
EC: 1 µS/cmAccuracy:
pH: +/- 0.05 pH
TDS: +/- 2%
EC: +/- 2%Temperature:
0 - 60 °C
32 - 140 °FATC:
0 - 60 °C
32 - 140 °F
SuperFish Digi Test pH
CHF 16.90
SuperFish Digi Test pHDigital ph meter for aquariums and pond water. This digital meter measures ph with an accuracy of up to 0.02 units, has an automatic calibration function and makes measuring ph much easier.Accurate pH meter for aquariums and.
pond water.Measures pH from 0 to 14 with an
accuracy of up to 0.02 units.The device features an automatic
calibration function for 1-point (6.86) and
2-point calibration (4.00 - 9.18).Calibration powder is included.Automatic power off after 5 minutes.UseRemove the protective cap before use.Press the power button. Submerge the pH meter up to the
Immersion line
into the water. The meter
is NOT waterproof, never immerse the
Never immerse the meter beyond the immersion line.
beyond the immersion line into the water.Wait about 30 seconds until the
reading is numerically constant.Read the pH of the water.Rinse the electrode with distilled water.
rinse, dry with a cloth and put the
protective cap.Avoid heat and direct sunlight.
1-point calibration 6.68
The calibration accuracy is ± 0.1 pHDissolve the pH 6.86 buffer powder in a
beaker with 250 ml of distilled 25°C
warm water.Dip the pH measuring instrument into the water
with the pH 6.86 solution and wait about
30 seconds.Press and hold the CAL button for 5
seconds.The display will begin to flash 6.86.
When it stops flashing, the pH meter has been
calibrated.Rinse the electrode with distilled water.
rinse with distilled water, dry with a cloth and put the
Put on the protective cap.
2-point calibration 4.00 and 9.18
The calibration accuracy is ± 0.02 pHDissolve the pH 4.00 buffer powder in a
beaker with 250 ml of distilled 25°C warm
water. Dissolve the buffer powder pH
9.18 in another beaker.Dip the pH meter into the water
with the pH 4.00 solution and wait about
30 seconds.Press and hold the CAL button for 5
seconds.The display will begin to flash 6.86.Press the CAL button briefly immediately.The display will flash 4.00. Wait until
the flashing stops.Rinse the electrode with distilled water.
water.Now immerse the pH meter in the
Water with the pH 9.18 solution and wait
about 30 seconds.Press and hold the CAL button for 5
seconds.On the display begins to flash 6.86.Press the CAL button immediately briefly.On the display flashes 4.00. Press the CAL button again immediately.On the display now flashes 9.18. If it stops
stops flashing, the pH meter is
calibrated.The electrode with distilled water
Rinse with distilled water, dry with a cloth and put the
protective cap on.Care: Keep the electrode clean and dry. Always close the meter with
the protective cap.
Warranty
1 year manufacturer's warranty. Damage due to improper
use (battery leakage,
water damage) is not covered. Lift
the proof of purchase for proof of warranty.
for proof of warranty. The warranty will be voided without proof of purchase!
The batteries supplied free of charge have a
life of one year. If they are empty
at the time of the empty, you must replace them yourself.
replace them yourself.
SuperFish Digi Test EC-TDS
CHF 13.90
SuperFish Digi Test EC-TDS3-in-1 TDS meter with plug&play function. High performance and fast test results.SuperFish Digi Test EC-TDS.
Accurate 3-in-1 TDS meter for.
Aquarium and pond water.Measures 3 different values: conductivity (EC), total dissolved solids (TDS) and.
Temperature in Celsius (°C) and Fahrenheit (°F).Calibration is not required.The meter has an automatic
Temperature compensation function.Automatic shutdown after 5 minutes. UseRemove the protective cap before use.Press the on/off button.Submerge the EC-TDS meter up to the
Immersion line into the water. The meter
is NOT waterproof, never submerge it
beyond the immersion line into the water.The test results are saved automatically after 5-10
Seconds automatically saved. To achieve a
better temperature measurement,
press CLEAR and repeat the
Test. The test results can also be stored by
Pressing HOLD to save.Take the meter out of the water,
to read the test results.Press the MODE button to toggle between the
test modes (ppm, μS/cm, °C and °F).Pressing the CLEAR button will clear the
test results are cleared for a new measurement.Wait 30 seconds before starting a new
start a new measurement.Wipe the electrode clean, switch off the
turn off the meter and replace the protective
protective cap back on.Avoid heat and direct sunlight.Care : Keep the electrodes clean and dry. Always close the meter with
the protective cap.
Please note! The color change of the display (green/red) has
no meaning..
Seneye Home - Freshwater Aquarium
CHF 139.90
Seneye Home - Freshwater Aquarium - Automatically tests multiple life critical parameters
temperature - constantly monitors water temperature, so you can get an alert if your heater breaks
free ammonia - monitors the highly toxic free ammonia (NH3) at very low levels, so you can stop your fish from dying from Ammonia posioning
pH monitoring - the seneye monitors pH in your aquarium or pond water between 6.4 and 9. This range is ideal for most aquatic life and by monitoring this range increased accuracy has be achieved.
Total Light - monitor your light levels over the course of the day and know if if your lights fail.
water level -
readings are only taken when the seneye device is in water, no false readings.
Easy to install, simply drop in
Constantly watching your aquarium, 5600 readings per month
Customisable alerts, directly to e-mail and SMS *
Upload results and get straightforward advice *
USB connection with multiple connection options, including optional USB power adaptor
*seneye+ required for some features.
system requirements
Windows PC with internet connectivity running Windows 7, 8, 10 32/64bit - Not compatible with Belkin Base and virtual USB extenders.Full speed USB 1.0 portMinimum 1Ghz processor and 128mb RAMInternet Browser: Internet Explorer 9.0+, Firefox 4.0+, Safari 4.0+Download of seneye connect application required from seneye.com
Ever lost a fish and not know why? Ever experience new tank syndrome and wished there was a way of knowing when the water is safe for your fish? With a seneye Home it’s now possible for even the most inexperienced fish keeper to be successful and become an expert. Automatic monitoring with a seneye Home can save fish from the devastating effects of ammonia poisoning, as well as from harmful swings in pH and temperature. The intelligent software can even alert the you before there is a problem, so you can relax and enjoy without having to worry – all this and it’s so simple to use.
As the seneye devices are USB there are multiple connection options available. When connected to the Power Adaptor readings are stored every hour and flashing lights on the device indicate if there is a problem. Readings are stored for 35 days and are automatically uploaded once reconnected to a PC.
Tip
JBL ProScan - Water analysis / Smartphone App
CHF 29.90
Variant:
Basic set
|
Variant (2):
Basic set
JBL ProScan - Water analysis via smartphone app
JBL ProScan - Water analysis with evaluation via smartphone app
With JBL Pro Scan, the current aquarium water values can be determined quickly and easily via smartphone app. All you need to do is install the free JBL app from the Apple AppStore or Google PlayStore on your smartphone.
Basic set:
Contains 24 analysis strips (GH, KH, pH, nitrite, nitrate, chlorine and CO₂ calculation) with associated JBL ProScan ColorCard.
The colour chart serves as a reference when scanning the analysis strip.
The result is evaluated and, if necessary, instructions are displayed on how the water values can be optimised.
The corresponding app is available free of charge.
Refill set:
24 analysis strips for digital evaluation with the JBL ProScan app.
Depending on the area of application, the app can be used in "Aquarium fresh water", "Garden pond water" and "Water" mode. If "Aquarium freshwater" and "Water" are selected, the app also automatically calculates the current CO2 content in the water from the values determined for pH and KH.
Based on the results of the analysis, the app provides specific recommendations for action and information on how to achieve ideal water values. The "Water" function only provides the pure water values.
The recording of the analysis strips and the calibration with the ColorCard should be carried out in bright daylight or artificial light. Direct sunlight should be avoided. The specified sequence of the app should always be followed during the measurement to ensure correct results. The app can be used in German and French.
Instructions for use:After starting the app for the first time, a one-off calibration using the JBL ProScan ColourCard is required. This calibration can be carried out quickly and easily by anyone. Afterwards, the water values can be analysed and evaluated immediately in conjunction with the JBL ProScan analysis strips. Immerse the analysis strip in water for 1 second, shake it off and then place it on the reference colour card (JBL ProScan ColorCard). Select the water type with the free ProScan app (in the Apple store & Google PlayStore), scan the colour card like a QR code and wait briefly for the result (waiting time is carried out by the app). The result is displayed directly in mg/l, ° hardness and the pH value. The values are evaluated by the app (good - medium - bad) and recommendations for optimisation are displayed. The type of ambient light is automatically evaluated and taken into account for colour calibration. The JBL ProScan analysis strips have been specially adapted for evaluation with the colour chart. No accuracy can be guaranteed with other test strips.
Variants from CHF 27.50
JBL PO4 Phosphate Test sensitive
CHF 25.90
Variant:
Test set
|
Variant (2):
Test set
JBL Phosphate Test sensitive - Quick test to determine the phosphate content in fresh and saltwater aquariums and ponds
Easy and reliable monitoring of the water values of aquariums and ponds.
Determines the phosphate value to control algae in freshwater and seawater
Laboratory comparator system to compensate the inherent water colouring: fill plastic cuvette with sample water, add reagents to another cuvette, place both cuvettes in holder, read values on colour chart
when setting up a new freshwater aquarium: once a week. in case of green algae problems
Package contents: 1 quick test, Phosphate Test PO4. Contents for approx. 50 measurements. Incl. 2 reagents, 2 glass vials, with screw cap, syringe, dosing spoon, comparator block and colour scale.
Variants from CHF 11.90
JBL Tray for cuvettes Cal
CHF 7.90
JBL Tray for cuvettes Cal - To keep the cuvettes stable during the calibration
The cuvettes, required for the calibration, can be put into this tray to make sure that they are safely fixed
Imprints on the surface of the tray help orientation during the calibration
The fourth opening holds the electrode
Waterproof plastic material
This tray for cuvettes and one electrode is already included in JBL ProFlora pH Control Touch
Dimensions: 15x15cm, H 2.7cm
This stand for cuvettes is very practical during calibration: during calibration the pH electrode is inserted in the cuvette, together with the temperature sensor and 10 ml calibration liquid. This tray has specially formed recesses to hold the cuvettes to prevent them from falling over.
Tetra Test KH 10 ml
CHF 10.40
TetraTest Karbonat - KH
Individual tests for the reliable and precise determination of the carbonate hardness in the aquarium
Suitable for fresh and saltwater aquariums
Inhalt: 10 ml
JBL Cu Copper Test
CHF 25.90
Variant:
Test set
|
Variant (2):
Test set
JBL Cu Copper Test for heavy metal control
Rapid test for determining the copper content in freshwater / seawater aquariums & ponds
Recommended value for oodinium treatment: 0.3 mg/l Cu.
Accurate test for determining the copper content in freshwater and saltwater aquariums. Graduated values: 0.15; 0.3: 0.45: 0.6; 0.8; 1.2; 1.6; 2.0 mg/l.
Also for testing tap water, which should not contain copper.
Helps with the dosage of copper-containing remedies and preparations, as the Cu content must never exceed 0.3 mg/l and too low dosages do not have a healing effect.
Variants from CHF 12.50
JBL SiO2 silicate test
CHF 26.20
Variant:
Test set
|
Variant (2):
Test set
PROAQUATEST SiO2 Silicate - JBL
Quick test to determine the silicate content in freshwater & marine aquariums
Package contents: 1 silicate test for approx. 50 measurements, incl. 2 reagents, 2 glass vials with screw caps, dosing spoon, syringe, comparator block and color scale. Reagent refill separately available
Silicates (silicic acid) are the cause of unsightly diatoms. With this test you determine the silicate content for diatom control in freshwater and marine aquariums
Laboratory comparator system to compensate the inherent water color: fill glass vials with sample water, add reagents to one vial, place vials in holder, read values off color chart
Use: when setting up a new aquarium, for checking tap water and during diatom problems
You will find detailed information and troubleshooting tips about water analysis on the JBL website in Essentials/Aquarium
Healthy aquariums with conditions close to nature The right water values are dependent on the fish stock and the plants in the aquarium. Even if the water looks clear it can be contaminated. With bad values diseases or algae can appear in the aquarium. To maintain a healthy aquarium with conditions close to nature it is important to check and adapt the water values regularly. For each water analysis JBL provides water tests in the form of rapid tests or color change tests. These determine a certain value or several values in one go. With these water tests you can recognise algae problems and negative nitrate, nitrite, potassium, magnesium values etc. Why test? Silicon is one of the most common elements in the world. As a result of the weathering of silicate rocks, silicon is washed into surface and ground water in the form of silicate. Depending on the composition of the rocks in a particular area, the mains water will contain varying amounts of dissolved silicate. The significance of silicon for aquariums and garden ponds is as a nutrient for diatoms, some aquatic plants, siliceous sponges and many other invertebrates. JBL Online Laboratory Regular monitoring for a healthy aquarium with conditions close to nature. Enter your water values into the JBL Online Laboratory and get an in-depth analysis of your values within seconds. Recommended silicate values: Freshwater aquarium (community aquarium): 0-2.0 mg/l Lake Malawi/Lake Tanganyika aquarium: the silicate content is not relevant here because grazing fish species like eating diatoms Plant aquarium with few fish (aquascaping): 0-2.0 mg/l Marine water Aquarium: 0-1.0 mg/l Pond: 0-2.0 mg/l
Variants from CHF 14.50
Customers also saw
JBL PO4 Phosphate Test sensitive
CHF 25.90
Variant:
Test set
|
Variant (2):
Test set
JBL Phosphate Test sensitive - Quick test to determine the phosphate content in fresh and saltwater aquariums and ponds
Easy and reliable monitoring of the water values of aquariums and ponds.
Determines the phosphate value to control algae in freshwater and seawater
Laboratory comparator system to compensate the inherent water colouring: fill plastic cuvette with sample water, add reagents to another cuvette, place both cuvettes in holder, read values on colour chart
when setting up a new freshwater aquarium: once a week. in case of green algae problems
Package contents: 1 quick test, Phosphate Test PO4. Contents for approx. 50 measurements. Incl. 2 reagents, 2 glass vials, with screw cap, syringe, dosing spoon, comparator block and colour scale.
Variants from CHF 11.90
JBL KH Test Set
CHF 13.90
Variant:
Test set
|
Variant (2):
Test set
JBL KH Test - quick test for determining the carbonate hardness in freshwater/sea water aquariums & ponds
Simple and safe control of water values in aquariums & ponds.
Determination of the optimum carbonate hardness for fresh and salt water
Colour change test: Fill plastic cuvette with sample water, add reagent drop by drop until colour changes from blue to yellow. Number of drops = level of carbonate hardness
Duration of use: For new aquariums: 1 time per week
Aquarium water test for healthy, clear water
1 rapid test, KH test. Incl. reagent and plastic cuvette. Refill reagent available separately
Healthy aquarium/healthy pond with near-natural conditionsThe correct water values in the aquarium/pond depend on the fish population and the plants present. Even if the water looks clear, it may be polluted. If the values are poor, diseases or algae can form in the aquarium/pond. For a healthy aquarium/pond with near-natural conditions, it is important to regularly check and adjust the water values.
JBL offers water tests in the form of rapid tests or colour change tests for every water analysis. These determine a specific value or several values simultaneously. With these water tests, algae problems can be recognised and negative nitrate, nitrite, potassium, magnesium values etc. can be determined.
Why test?Maintaining a suitable KH value as consistently as possible is an important prerequisite for the well-being of the aquarium and pond inhabitants and for aquatic plants to thrive. Carbonate hardness is one of the most important water values, as it keeps the pH value stable. The KH should never fall below 4 °dKH.
Variants from CHF 6.50
Aqua Rebell Basic Micro Iron
From
CHF 14.90
Plant fertilizer Aqua Rebell - Basis Micro IronHigh-quality iron fertilizer for intense plant coloursAqua Rebell Micro Iron is a specially developed micronutrient fertilizer that supplies aquarium plants with iron (Fe) and trace elements in a targeted manner. Iron is essential for the formation of chlorophyll, which ensures lush green leaves and healthy plants. A deficiency can lead to pale or yellowish leaves. This liquid aquarium fertilizer ensures that your aquatic plants are optimally supplied with iron and develop their full colour intensity.Advantages of Aqua Rebell Micro IronTargeted iron supply for healthy, strong plantsPromotes bright colors and lush green foliagePrevents iron deficiency (chlorosis) and yellow leavesIdeal for planted aquariums, aquascaping & natural aquariumsSimple dosing - Perfectly matched to aquariums with CO₂ fertilizationApplication & dosageThe recommended dosage is 5 ml per 100 liters of aquarium water to increase the iron content by approx. 0.05 mg/l. The exact amount can be adjusted individually depending on the plant population and water values.📌 Dosing recommendation:With a lot of light (>0.5 watts per liter) with CO2 you need 2ml/day For low light (<0.5 watts per liter) with CO2 you need 1.5ml/daywithout CO2 you need 10ml/weekAdjust the dosage to the amount of plants, light intensity and CO₂ supply of the aquarium.With Aqua Rebell Micro Iron you ensure a targeted supply of micronutrients that rewards your plants with intense colors and vital growth.
Aqua Rebell Makro Basic Phosphate
From
CHF 15.90
Plant fertilizer Aqua Rebell - Makro Basic PhosphateEffective phosphate fertilization for strong plant growthAqua Rebell Makro Phosphate is a high-quality phosphate fertilizer for aquarium plants that specifically increases the phosphate content (PO4) in the aquarium. Phosphate is an essential macronutrient for plant growth and can quickly become limited in well-planted or nutrient-poor aquariums. This liquid aquarium fertilizer optimally supplies aquatic plants, promotes strong roots and leaves and prevents growth stagnation.Advantages of Aqua Rebell Makro PhosphatTargeted phosphate supply for healthy and vital plant growthPreventsdeficiency symptoms such as slow growth or discolorationImproves nutrient uptake and supports strong leavesIdeal for planted aquariums, aquascaping & natural aquariumsSimple dosing - perfectly matched to aquariums with CO₂ fertilizationApplication & dosageThe recommended dosage is 5 ml per 100 liters of aquarium water to increase the phosphate content by approx. 0.1 mg/l. The exact amount can be adjusted individually depending on the plant population and water values.📌 Dosing recommendation:Add directly to the aquarium weekly or as requiredRegularly check the water values for optimum resultsUse in combination with other Aqua Rebell fertilizers for a complete nutrient supplyWith Aqua Rebell Makro Phosphat you can optimize the nutrient supply in your aquarium and create ideal conditions for lush plant growth.
JBL GH Test
CHF 13.90
Variant:
Test set
|
Variant (2):
Test set
JBL GH Test - GH quick test to determine the total hardness in freshwater aquariums and ponds
Simple and reliable control of water values in ponds/aquariums. Determines the ideal total hardness for freshwater aquariums and ponds
Colour change test: fill plastic cuvette with sample water, add reagent drop by drop until colour changes from red to green. Number of drops = level of GH (total hardness)
When to use: for setting up a new aquarium: once a week
Online Laboratory: regular control for a healthy aquarium/pond with conditions close to nature. JBL has water tests in the form of quick tests or colour change tests for every water analysis. Testing aquarium water for healthy, clear water
Package contents: 1 quick test, GH Test. Incl. reagent and plastic vial. Refill reagent avaiable separately
Healthy aquarium/healthy pond with conditions close to natureThe right water values are dependent on the fish stock and the plants in the aquarium/pond. Even if the water looks clear it can be contaminated. With bad values diseases or algae can appear in the aquarium/pond. To maintain a healthy aquarium/pond with conditions close to nature it is important to check and adapt the water values regularly.For each water analysis JBL provides water tests in the form of quick tests or colour change tests. These determine a certain value or several values in one go. With these water tests you can recognise algae problems and negative nitrate, nitrite, potassium, magnesium values etc.Why test?Depending on origin and consistency of the subsoil, water may contain varying quantities of alkaline earth salts, usually in the form of calcium and magnesium salts. General hardness, by definition, is the sum of calcium and magnesium ions suspended in the water. Most fish and plants thrive well at a general hardness of between roughly 8 and 20°dH. Excessive total hardness values, should, however, be counteracted by the appropriate measures.JBL Online LaboratoryRegular control for a healthy aquarium/pond with conditions close to nature. Enter your water values into the JBL Online Laboratory and get an in-depth analysis of your values within seconds.Recommended general hardness values:Freshwater aquarium (community aquarium): 8-25 °dGHLake Malawi/Lake Tanganyika aquarium: 5-20 °dGHPlant aquarium with few fish (aquascaping): 3-10 °dGHMarine aquarium: not measurable with GH test because GH too high. Please test calcium and magnesium separatelyPond: 6-20 °dGH
Variants from CHF 7.20
JBL NO3 Nitrate Test
CHF 31.50
Variant:
Test set
|
Variant (2):
Test set
JBL Nitrate Test NO3 - Quick test to determine the nitrate content in fresh and saltwater aquariums and pond
Easy and reliable monitoring of the water values of aquariums and ponds
Determines the ideal nitrate values to control the algae in freshwater and seawater
Laboratory comparator system to compensate the inherent water colouring: fill plastic cuvette with sample water, add reagents to another cuvette, place both cuvettes in holder, read values on colour chart
When to use: for setting up a new freshwater aquarium: once a week. For initial setup with marine water: once a week. In case of green algae problems
1 quick test, Nitrate Test NO3. Contents for approx. 50 tests, incl. 2 reagents, 2 glass vials with screw caps, syringe, dosing spoon, comparator block and colour scale. Refill reagents available separately
Healthy aquarium/healthy pond with conditions close to natureThe right water values are dependent on the fish stock and the plants in the aquarium/pond. Even if the water looks clear it can be contaminated. With bad values diseases or algae can appear in the aquarium/pond. To maintain a healthy aquarium with conditions close to nature it is important to check and adapt the water values regularly.
For each water analysis JBL provides water tests in the form of quick tests or colour change tests. These determine a certain value or several values in one go. With these water tests you can recognise algae problems and negative nitrate, nitrite, potassium, magnesium values etc.
Why test?Nitrate is the end product of the mineralisation in the aquarium/pond. Even in relatively high concentrations it is non-toxic for fish, but has an adverse effect for plant growth and the well-being of many a fish species. Furthermore too high nitrate contents promote unwanted algae growth if phosphate is present in the water as well as nitrate.
Variants from CHF 16.70