JBL Test Combi Set plus Fe
Product number:
CO-JB24092.00
CHF 82.50
Stock: 0
Available in 1-3 days, acquisition time 14 days
Product information "JBL Test Combi Set plus Fe"
JBL Test Combi Set plus Fe
Test case with the most important water tests in freshwater aquariums, incl. iron test
- Monitors the water values in aquariums simply and reliably. Determines: pH value, carbonate hardness, iron, nitrite, nitrate, CO2 (calculation via table)
- Easy to use: syringe for exact measurement of the water quantity, detailed instructions for use
- Laboratory comparator system to compensate the inherent water colouring, analysis record sheet, instructions for problem solving, CO2 table
- Child-proof reagent bottles, water-proof plastic case, refillable kit
- Package contents: 1 test case for planted aquariums, 5 reagents, 3 glass vials, syringe, dosing spoon, comparator block, plastic cuvette, colour charts, analysis record sheets, instructions
Healthy aquariums with conditions close to nature The right water values are dependent on the fish stock and the plants in the aquarium. Even if the water looks clear it can be contaminated. With bad values diseases or algae can appear in the aquarium. To maintain a healthy aquarium with conditions close to nature it is important to check and adapt the water values regularly. With the JBL Test Combi Set you can determine the 5 most important water values in your aquarium.
Precise measurement of the following values:
pH test: acidity of the water from 3.0 to 10
KH test: pH stability of the water (carbonate hardness)
Fe test: iron value to control the fertilisation
NO2 test: toxic nitrogen compound
NO3 test: reason for algae growth
To determine the CO2 content you just need to measure the pH and KH values. From both values arises the CO2 content in the water, which then can be referenced from the enclosed table.
You can analyze your measured water values in the JBL Online Laboratory free of charge and receive recommendations.
Composition
Feeding recommendation
Technical details
Size information
Login
Customers also bought
Hydor Pico pump
CHF 17.90
Variant:
200
|
Variant (1):
200
Die neue Pumpenserie PICO Evolution unterscheidet sich durch extrem starke Leistungen, geringe Abmessungen und totale Betriebssicherheit dank der Hydor Bautechnologie. Alle Modelle, auch das kleinste, sind mit einem Leistungsregler ausgestattet und eignen sich insbesondere zum Einsatz in Süss- und Meerwasseraquarien, Tischbrunnen und Innendekorations-artikel.
TYPE
Watt
FLOWRATE
Pumphöhe max.
200
4.5W
270l/h
50 cm
400
4W
385 l/h
70 cm
600
4.5W
600 l/h
30 cm
800
6W
750 l/h
40 cm
1000
7W
980 l/h
60 cm
1200
7W
1120 l/h
70 cm
SuperFish Digi Test pH
CHF 16.90
SuperFish Digi Test pHDigital ph meter for aquariums and pond water. This digital meter measures ph with an accuracy of up to 0.02 units, has an automatic calibration function and makes measuring ph much easier.Accurate pH meter for aquariums and.
pond water.Measures pH from 0 to 14 with an
accuracy of up to 0.02 units.The device features an automatic
calibration function for 1-point (6.86) and
2-point calibration (4.00 - 9.18).Calibration powder is included.Automatic power off after 5 minutes.UseRemove the protective cap before use.Press the power button. Submerge the pH meter up to the
Immersion line
into the water. The meter
is NOT waterproof, never immerse the
Never immerse the meter beyond the immersion line.
beyond the immersion line into the water.Wait about 30 seconds until the
reading is numerically constant.Read the pH of the water.Rinse the electrode with distilled water.
rinse, dry with a cloth and put the
protective cap.Avoid heat and direct sunlight.
1-point calibration 6.68
The calibration accuracy is ± 0.1 pHDissolve the pH 6.86 buffer powder in a
beaker with 250 ml of distilled 25°C
warm water.Dip the pH measuring instrument into the water
with the pH 6.86 solution and wait about
30 seconds.Press and hold the CAL button for 5
seconds.The display will begin to flash 6.86.
When it stops flashing, the pH meter has been
calibrated.Rinse the electrode with distilled water.
rinse with distilled water, dry with a cloth and put the
Put on the protective cap.
2-point calibration 4.00 and 9.18
The calibration accuracy is ± 0.02 pHDissolve the pH 4.00 buffer powder in a
beaker with 250 ml of distilled 25°C warm
water. Dissolve the buffer powder pH
9.18 in another beaker.Dip the pH meter into the water
with the pH 4.00 solution and wait about
30 seconds.Press and hold the CAL button for 5
seconds.The display will begin to flash 6.86.Press the CAL button briefly immediately.The display will flash 4.00. Wait until
the flashing stops.Rinse the electrode with distilled water.
water.Now immerse the pH meter in the
Water with the pH 9.18 solution and wait
about 30 seconds.Press and hold the CAL button for 5
seconds.On the display begins to flash 6.86.Press the CAL button immediately briefly.On the display flashes 4.00. Press the CAL button again immediately.On the display now flashes 9.18. If it stops
stops flashing, the pH meter is
calibrated.The electrode with distilled water
Rinse with distilled water, dry with a cloth and put the
protective cap on.Care: Keep the electrode clean and dry. Always close the meter with
the protective cap.
Warranty
1 year manufacturer's warranty. Damage due to improper
use (battery leakage,
water damage) is not covered. Lift
the proof of purchase for proof of warranty.
for proof of warranty. The warranty will be voided without proof of purchase!
The batteries supplied free of charge have a
life of one year. If they are empty
at the time of the empty, you must replace them yourself.
replace them yourself.
JBL Phosphate Test sensitive
CHF 25.90
Variant:
Test set
|
Variant (2):
Test set
JBL Phosphate Test sensitive - Quick test to determine the phosphate content in fresh and saltwater aquariums and ponds
Easy and reliable monitoring of the water values of aquariums and ponds.
Determines the phosphate value to control algae in freshwater and seawater
Laboratory comparator system to compensate the inherent water colouring: fill plastic cuvette with sample water, add reagents to another cuvette, place both cuvettes in holder, read values on colour chart
when setting up a new freshwater aquarium: once a week. in case of green algae problems
Package contents: 1 quick test, Phosphate Test PO4. Contents for approx. 50 measurements. Incl. 2 reagents, 2 glass vials, with screw cap, syringe, dosing spoon, comparator block and colour scale.
Variants from CHF 11.90
EHEIM StreamOn Stream pump
CHF 81.00
Variant:
streamON+ 3500
|
Variant (2):
streamON+ 3500
EHEIM StreamOn Strömungspumpe+ 3500 - 9500
Die EHEIM StreamOn Strömungspumpe - für ein natürliches sanftes Strömungsbild und die Erzeugung von naturnahen Lebensverhältnissen!
regulierbare Pumpenleistung
mit Magnethalterung
optimale Wasserumwälzung
erhöht den Sauerstoffgehalt
schaffen ein natürliches und sanftes Strömungsbild
naturnahe Lebensverhältnisse
leise und wartugsarm
geringer Stromverbrauch, hohe Energieeffizient
Sicherheit und Zuverlässigkeit
Drei verschiedene Ausführungen: streamON+ 35002.5W, 3500l/h, für Aquarien bis ca. 35-200 LiterstreamON+ 65006W, 6500l/h, für Aquarien bis ca. 150-350 LiterstreamON+ 950012W, 9500l/h, für Aquarien bis ca. 350-500 Liter
Die EHEIM Strömungspumpen streamON haben eine optimale Wasserumwälzung und erhöhen den Sauerstoffgehalt. Die Strömungspumpen schaffen ein natürliches und sanftes Strömungsbild und erzeugen naturnahe Lebensverhältnisse. Die Pumpen sind einfach und flexibel positionierbar und dazu auch sehr leise und wartungsarm. Mit niedrigem Stromverbrauch und hoher Energieeffizient. Höchste Sicherheit und Zuverlässigkeit.
Similar products
New
Dennerle KCL Lösungsmittel
CHF 8.90
Dennerle KCL Lösungsmittel Ideale Pflege für pH-Elektroden
Das Dennerle KCL Lösungsmittel sorgt für die langfristige Aufbewahrung und Pflege von pH-Elektroden. Mit seiner speziellen Formel garantiert es eine optimale Feuchtigkeit, um Austrocknung und Messfehler zu vermeiden. Dieses Lösungsmittel verlängert die Lebensdauer deiner pH-Sonde und sorgt für präzise und zuverlässige Messergebnisse in deinem Aquarium.
Produktvorteile
Schutz vor Austrocknung: Sichert eine richtige Aufbewahrung und verhindert das Austrocknen von pH-Elektroden.
Längere Lebensdauer: Verlängert die Lebensdauer deiner pH-Sonde durch regelmässige Anwendung.
Präzise Messergebnisse: Hilft, die Messgenauigkeit der pH-Sonde aufrechtzuerhalten.
Einfache Handhabung: Direkte Anwendung für die langfristige Funktionsfähigkeit deiner pH-Elektrode.
Hochwertige Qualität: Für verlässliche Ergebnisse – Dennerle steht für geprüfte Aquaristik-Qualität.
AnwendungFülle das Dennerle KCL Lösungsmittel in die Aufbewahrungslösung deiner pH-Elektrode, um sie während der Lagerung feucht zu halten und die Lebensdauer zu verlängern. Die regelmässige Anwendung schützt vor Austrocknung und sorgt für präzise Messergebnisse.
Tip
ARKA pH meter / pH measuring device
CHF 19.90
Digital pH meterThis high-precision instrument has been specially developed for determining the pH value of water. With its user-friendly operation and fast response time, it is a practical tool for anyone who wants to determine the quality of their water.
Whether for the home aquarium, the garden pond, the pool in the garden or for checking osmosis and drinking water - the ARKA myAQUA® pH meter provides reliable measurement results.It is ideal for regular monitoring to ensure the well-being of aquatic life or to guarantee water quality for human consumption. The importance of a balanced pH value cannot be overestimated, as it is one of the key factors in maintaining a healthy water system.The ARKA myAQUA® pH meter makes it easier than ever to keep an eye on this critical parameter. Thanks to its compact size and robust design, it is suitable for both home use and professional applications. The simple handling enables even inexperienced users to take precise measurements and thus actively contribute to the care of their water environment.Measuring range: 0.00 - 14.00 pHMeasuring gradation: 0.01 pHAccuracy: +/- 0.01 pHOperating temperature: 0 - 60 °C
ARKA pH/TDS/EC meter
CHF 49.90
Digital pH/TDS/EC meterThe ARKA myAQUA® pH/TDS/EC meter is an advanced water analysis tool designed for comprehensive and accurate testing of various water quality parameters.It can be used to quickly and accurately measure total dissolved solids (TDS), electrical conductivity (EC), pH and temperature in water and other liquids.Its versatility makes it an indispensable tool for monitoring and maintenance in aquariums, ponds, pools and in the treatment of osmosis and drinking water.Whether it is about the health of aquarium inhabitants, the quality of swimming pool water or the safety of drinking water - the ARKA myAQUA® pH/TDS/EC meter provides reliable data that you can always rely on.Measuring range:pH: 0.00 - 14.00 pH
TDS: 0 - 9999 ppm
EC: 0 - 9999 µS/cmMeasuring gradation:
pH: 0.01 pH
TDS: 1 ppm
EC: 1 µS/cmAccuracy:
pH: +/- 0.05 pH
TDS: +/- 2%
EC: +/- 2%Temperature:
0 - 60 °C
32 - 140 °FATC:
0 - 60 °C
32 - 140 °F
SuperFish Digi Test pH
CHF 16.90
SuperFish Digi Test pHDigital ph meter for aquariums and pond water. This digital meter measures ph with an accuracy of up to 0.02 units, has an automatic calibration function and makes measuring ph much easier.Accurate pH meter for aquariums and.
pond water.Measures pH from 0 to 14 with an
accuracy of up to 0.02 units.The device features an automatic
calibration function for 1-point (6.86) and
2-point calibration (4.00 - 9.18).Calibration powder is included.Automatic power off after 5 minutes.UseRemove the protective cap before use.Press the power button. Submerge the pH meter up to the
Immersion line
into the water. The meter
is NOT waterproof, never immerse the
Never immerse the meter beyond the immersion line.
beyond the immersion line into the water.Wait about 30 seconds until the
reading is numerically constant.Read the pH of the water.Rinse the electrode with distilled water.
rinse, dry with a cloth and put the
protective cap.Avoid heat and direct sunlight.
1-point calibration 6.68
The calibration accuracy is ± 0.1 pHDissolve the pH 6.86 buffer powder in a
beaker with 250 ml of distilled 25°C
warm water.Dip the pH measuring instrument into the water
with the pH 6.86 solution and wait about
30 seconds.Press and hold the CAL button for 5
seconds.The display will begin to flash 6.86.
When it stops flashing, the pH meter has been
calibrated.Rinse the electrode with distilled water.
rinse with distilled water, dry with a cloth and put the
Put on the protective cap.
2-point calibration 4.00 and 9.18
The calibration accuracy is ± 0.02 pHDissolve the pH 4.00 buffer powder in a
beaker with 250 ml of distilled 25°C warm
water. Dissolve the buffer powder pH
9.18 in another beaker.Dip the pH meter into the water
with the pH 4.00 solution and wait about
30 seconds.Press and hold the CAL button for 5
seconds.The display will begin to flash 6.86.Press the CAL button briefly immediately.The display will flash 4.00. Wait until
the flashing stops.Rinse the electrode with distilled water.
water.Now immerse the pH meter in the
Water with the pH 9.18 solution and wait
about 30 seconds.Press and hold the CAL button for 5
seconds.On the display begins to flash 6.86.Press the CAL button immediately briefly.On the display flashes 4.00. Press the CAL button again immediately.On the display now flashes 9.18. If it stops
stops flashing, the pH meter is
calibrated.The electrode with distilled water
Rinse with distilled water, dry with a cloth and put the
protective cap on.Care: Keep the electrode clean and dry. Always close the meter with
the protective cap.
Warranty
1 year manufacturer's warranty. Damage due to improper
use (battery leakage,
water damage) is not covered. Lift
the proof of purchase for proof of warranty.
for proof of warranty. The warranty will be voided without proof of purchase!
The batteries supplied free of charge have a
life of one year. If they are empty
at the time of the empty, you must replace them yourself.
replace them yourself.
SuperFish Digi Test EC-TDS
CHF 13.90
SuperFish Digi Test EC-TDS3-in-1 TDS meter with plug&play function. High performance and fast test results.SuperFish Digi Test EC-TDS.
Accurate 3-in-1 TDS meter for.
Aquarium and pond water.Measures 3 different values: conductivity (EC), total dissolved solids (TDS) and.
Temperature in Celsius (°C) and Fahrenheit (°F).Calibration is not required.The meter has an automatic
Temperature compensation function.Automatic shutdown after 5 minutes. UseRemove the protective cap before use.Press the on/off button.Submerge the EC-TDS meter up to the
Immersion line into the water. The meter
is NOT waterproof, never submerge it
beyond the immersion line into the water.The test results are saved automatically after 5-10
Seconds automatically saved. To achieve a
better temperature measurement,
press CLEAR and repeat the
Test. The test results can also be stored by
Pressing HOLD to save.Take the meter out of the water,
to read the test results.Press the MODE button to toggle between the
test modes (ppm, μS/cm, °C and °F).Pressing the CLEAR button will clear the
test results are cleared for a new measurement.Wait 30 seconds before starting a new
start a new measurement.Wipe the electrode clean, switch off the
turn off the meter and replace the protective
protective cap back on.Avoid heat and direct sunlight.Care : Keep the electrodes clean and dry. Always close the meter with
the protective cap.
Please note! The color change of the display (green/red) has
no meaning..
Seneye Home - Freshwater Aquarium
CHF 139.90
Seneye Home - Freshwater Aquarium - Automatically tests multiple life critical parameters
temperature - constantly monitors water temperature, so you can get an alert if your heater breaks
free ammonia - monitors the highly toxic free ammonia (NH3) at very low levels, so you can stop your fish from dying from Ammonia posioning
pH monitoring - the seneye monitors pH in your aquarium or pond water between 6.4 and 9. This range is ideal for most aquatic life and by monitoring this range increased accuracy has be achieved.
Total Light - monitor your light levels over the course of the day and know if if your lights fail.
water level -
readings are only taken when the seneye device is in water, no false readings.
Easy to install, simply drop in
Constantly watching your aquarium, 5600 readings per month
Customisable alerts, directly to e-mail and SMS *
Upload results and get straightforward advice *
USB connection with multiple connection options, including optional USB power adaptor
*seneye+ required for some features.
system requirements
Windows PC with internet connectivity running Windows 7, 8, 10 32/64bit - Not compatible with Belkin Base and virtual USB extenders.Full speed USB 1.0 portMinimum 1Ghz processor and 128mb RAMInternet Browser: Internet Explorer 9.0+, Firefox 4.0+, Safari 4.0+Download of seneye connect application required from seneye.com
Ever lost a fish and not know why? Ever experience new tank syndrome and wished there was a way of knowing when the water is safe for your fish? With a seneye Home it’s now possible for even the most inexperienced fish keeper to be successful and become an expert. Automatic monitoring with a seneye Home can save fish from the devastating effects of ammonia poisoning, as well as from harmful swings in pH and temperature. The intelligent software can even alert the you before there is a problem, so you can relax and enjoy without having to worry – all this and it’s so simple to use.
As the seneye devices are USB there are multiple connection options available. When connected to the Power Adaptor readings are stored every hour and flashing lights on the device indicate if there is a problem. Readings are stored for 35 days and are automatically uploaded once reconnected to a PC.
Tip
JBL ProScan Multi water test with smartphone app
CHF 29.90
Variant:
Basic set
|
Variant (2):
Basic set
JBL ProScan
Multi water test with evaluation by means of smartphone app
Contains 24 analysis strips ( GH, KH, pH, nitrite, nitrate, chlorine and for the calculation of CO₂) with matching JBL ProScan ColorCard.
The colour chart serves as a reference when scanning the analysis strip.
The result is evaluated and, where necessary, instructions are displayed to show how to optimize the water values.
The appropriate app is available free of charge.
Variants from CHF 27.50
JBL Phosphate Test sensitive
CHF 25.90
Variant:
Test set
|
Variant (2):
Test set
JBL Phosphate Test sensitive - Quick test to determine the phosphate content in fresh and saltwater aquariums and ponds
Easy and reliable monitoring of the water values of aquariums and ponds.
Determines the phosphate value to control algae in freshwater and seawater
Laboratory comparator system to compensate the inherent water colouring: fill plastic cuvette with sample water, add reagents to another cuvette, place both cuvettes in holder, read values on colour chart
when setting up a new freshwater aquarium: once a week. in case of green algae problems
Package contents: 1 quick test, Phosphate Test PO4. Contents for approx. 50 measurements. Incl. 2 reagents, 2 glass vials, with screw cap, syringe, dosing spoon, comparator block and colour scale.
Variants from CHF 11.90
JBL Tray for cuvettes Cal
CHF 7.90
JBL Tray for cuvettes Cal - To keep the cuvettes stable during the calibration
The cuvettes, required for the calibration, can be put into this tray to make sure that they are safely fixed
Imprints on the surface of the tray help orientation during the calibration
The fourth opening holds the electrode
Waterproof plastic material
This tray for cuvettes and one electrode is already included in JBL ProFlora pH Control Touch
Dimensions: 15x15cm, H 2.7cm
This stand for cuvettes is very practical during calibration: during calibration the pH electrode is inserted in the cuvette, together with the temperature sensor and 10 ml calibration liquid. This tray has specially formed recesses to hold the cuvettes to prevent them from falling over.
Tetra Test KH 10 ml
CHF 10.40
TetraTest Karbonat - KH
Individual tests for the reliable and precise determination of the carbonate hardness in the aquarium
Suitable for fresh and saltwater aquariums
Inhalt: 10 ml
JBL Copper Test Cu
CHF 25.90
Variant:
Test set
|
Variant (2):
Test set
JBL Copper Test Cu - Quick test to determine the copper content in freshwater/saltwater aquariums & ponds
Easy and reliable control of water values in aquariums/ponds.
Determines the ideal copper value for the monitoring of heavy metals in the fresh and saltwater aquariums
Laboratory comparator system to compensate the inherent water colouring: fill plastic cuvette with sample water, add reagents to another cuvette, place cuvettes in holder, read values on colour chart
Package contents: 1 quick test, Copper test Cu. contents for approx. 50 measurements incl. 2 reagents, 2 glass vials with srew cap, syringe, comparator block and colour scale. Refill reagents available separately
Variants from CHF 12.50
JBL PROAQUATEST SiO2 Silicate
CHF 26.20
Variant:
Test set
|
Variant (2):
Test set
PROAQUATEST SiO2 Silicate - JBL
Quick test to determine the silicate content in freshwater & marine aquariums
Package contents: 1 silicate test for approx. 50 measurements, incl. 2 reagents, 2 glass vials with screw caps, dosing spoon, syringe, comparator block and color scale. Reagent refill separately available
Silicates (silicic acid) are the cause of unsightly diatoms. With this test you determine the silicate content for diatom control in freshwater and marine aquariums
Laboratory comparator system to compensate the inherent water color: fill glass vials with sample water, add reagents to one vial, place vials in holder, read values off color chart
Use: when setting up a new aquarium, for checking tap water and during diatom problems
You will find detailed information and troubleshooting tips about water analysis on the JBL website in Essentials/Aquarium
Healthy aquariums with conditions close to nature The right water values are dependent on the fish stock and the plants in the aquarium. Even if the water looks clear it can be contaminated. With bad values diseases or algae can appear in the aquarium. To maintain a healthy aquarium with conditions close to nature it is important to check and adapt the water values regularly. For each water analysis JBL provides water tests in the form of rapid tests or color change tests. These determine a certain value or several values in one go. With these water tests you can recognise algae problems and negative nitrate, nitrite, potassium, magnesium values etc. Why test? Silicon is one of the most common elements in the world. As a result of the weathering of silicate rocks, silicon is washed into surface and ground water in the form of silicate. Depending on the composition of the rocks in a particular area, the mains water will contain varying amounts of dissolved silicate. The significance of silicon for aquariums and garden ponds is as a nutrient for diatoms, some aquatic plants, siliceous sponges and many other invertebrates. JBL Online Laboratory Regular monitoring for a healthy aquarium with conditions close to nature. Enter your water values into the JBL Online Laboratory and get an in-depth analysis of your values within seconds. Recommended silicate values: Freshwater aquarium (community aquarium): 0-2.0 mg/l Lake Malawi/Lake Tanganyika aquarium: the silicate content is not relevant here because grazing fish species like eating diatoms Plant aquarium with few fish (aquascaping): 0-2.0 mg/l Marine water Aquarium: 0-1.0 mg/l Pond: 0-2.0 mg/l
Variants from CHF 14.50
Customers also viewed
JBL Aqua Ex 20-45 cm
CHF 28.90
Bodenreiniger (Mulmglocke) für 20 - 45 cm Wasserstand
Reinigungskralle zur variablen Dosierung der Saugstärke.
Runder Querschnitt mit >Ecke< ermöglicht auch die Reinigung von Aquarienecken und schwer zugänglichen Stellen.
Innendurchmesser 40 mm.
Ansaugventil erübrigt ein Ansaugen mit dem Mund.
Inklusive 2 m Schlauch (16 mm) und 2 Schlauchklips (JBL ClipSafe) sowie Absperrhahn.