Heat Lamp CageDer „Heizlampen-Sicherheitskäfig“ von Arcadia Reptile ist ein benutzerfreundliches, stilvolles Produkt, das einfach über eine Lampe und einen Lampenhalter (Ceramic Lamp Holder Pro) gestülpt wird. Heizlampen-Sicherheitskäfige tragen dazu bei, das Verbrennungsrisiko zu verringern, und sind daher ein unverzichtbares Zubehör für alle Heizlampen, die in einem Terrarium verwendet werden.
Der Käfig verfügt über eine federnde Tür an der Unterseite, die einen einfachen Lampenwechsel ermöglicht, sowie über flache Ösen zur Befestigung von Schrauben.
Der Käfig hat ausserdem eine Öffnung für das Stromkabel, sodass alles ordentlich und aufgeräumt bleibt.
Denken Sie daran, immer ein geeignetes Thermostat-Regelsystem mit Heizsystem und Käfig zu verwenden, um sowohl das Tier als auch den Halter zu schützen.
LampGuard Pro
Lamp Guard Pro ein vielseitiger Lampenkäfig. schützt Tiere und Lampen•
lässt so viel Licht wie möglich in das Vivarium kann mit T8/T5 und
ProT5 Geräten verwendet werden. einfacher Lampenwechsel integrierte Scharniere beschichtet und rostfrei mehrere
Kabeleingangspunkte Dieser einfach zu bedienende Lampenkäfig wurde von
Experten entwickelt, um so viel Licht wie möglich durch das Gitter zu
lassen. Dies gewährleistet ein hohes Mass an Schutz bei gleichzeitiger
Aufrechterhaltung eines maximalen Niveaus an essentiellem UV-B. Dies
wird durch die Verwendung einer speziell gewählten Maschenweite und form, Lackfarbe und durch das Auftragen einer dicken Glanzbeschichtung
erreicht. Auf diese Weise kann sichergestellt werden, dass so viel Licht
wie möglich durch das Gitter gelangt und Ihre Tiere gut versorgt
bleiben. Kommerzielle Abdeckungen/Lampenkäfige können den Lichtfluss im
Neuzustand um 40 % reduzieren, LampGuardPro reduziert dies auf etwa 15 %
der gesamten Lichtenergie und bleibt danach recht stabil. LampGuardPro
ist einfach zu montieren und benötigt nur 4 geeignete Schrauben. Es
wurde auch mit Scharnieren auf beiden Seiten ausgestattet, so dass nur 2
Schrauben entfernt werden müssen, um einen schnellen und einfachen
Lampenwechsel zu ermöglichen.. In den Längen 51 cm, 66 cm, 81 cm, 96 cm erhältlich. Dieser Lampenschutz ist rostbeständig und kann
bei Bedarf im Rahmen der monatlichen Pflege abgewischt werden, um
sicherzustellen, dass so viel Licht wie möglich durch das Gitter auf die
Tiere gelangt. LampGuardPro wurde auch mit mehreren
Kabeleingangspunkten entwickelt. Das bedeutet, dass LampGuardPro mit
reflektierten T8- und HO-T5-Lampen mit separaten Controllern und unserem
HO-T5-Verbindungssystem "ProT5" UV-B verwendet werden kann. Es ist
wichtig, dass wir unseren Tieren Schutz vor allen möglichen
Schadensquellen bieten. Dieser Schutz schützt Ihre Tiere vor Berührungen
der Beleuchtung und hilft auch, elektrische Kabel der Lampe zu sichern.
Hobby UV-B Quick test
With this test, you can easily and quickly see whether your source of UV-B rays continues to radiate them. To test this hold the card approximately 5 cm under the lamp and wait 10 seconds. A part of the card will change from white to purple, depending on the intensity of discolouration you can tell the strength of your UV rays. According to the manufacturer, this card can be used up to 500 times. Warning! Replace your UV-lamp at least yearly if not more often, this card should be used as an indicator to do so.
The Night Sky LED set imitates the light of the moon and makes nocturnal observations of reptiles and amphibians possible, without disturbing the animals
perfect for nighttime viewing
crates confortable night ambience
no distrubance for the animals
low power consumption
no heat developement
extendable
installation in terrarium ceiling
widespread illumination of the vivarium
PnP connetors for easy installation
Advantages of the LED technology are low energy consumption, low heat emission and a long life of the light emitting diodes. Therefore, illuminating terrariums all night long is possible, without hindering the natural nocturnal drop of temperature as with other light sources. Especially nightlight incandescent lamps consume a lot of energy and consequently produce a lot of unwanted heat as well. In addition their ability to illuminate the terrarium properly and allow nighttime viewing is limited.The energy consumption of the LEDs in the Night Sky LED set is merely 0,2W per LED. This is the most energy efficient way to illuminate a terrarium at night.
The Night Sky LED set contains 3 moonlight LEDs and an electric transformer, with which up to 6 LEDs can be powered. Additional LEDs are available separately. The LEDs are connected to the transformer by a connector, which makes them easy to install. Mounted on the ceiling of a terrarium, they enable a well-balanced nocturnal illumination of the whole terrarium.
The Scorpio nightlight can flourezierende objects and some types of Skoprionen and tarantulas by the ultraviolet light lamps
Makes fluorescent objects glow
Ideal ultraviolet nightlight
Allows natural nighttime temperature drops
Long lifespan, low energy
Includes self-adhesive support base
The Exo Terra Scorpion Light adds a whole new dimension to keeping invertebrates. The Scorpion Light provides a soft ultraviolet light, similar to the UV-rays reflected by the moon’s surface. Ultraviolet light makes certain scorpions, spiders and insects glow in the dark, it will light up certain spider webs and instigate spider mating behavior. The UV-emitting Scorpion Light will show you a new hidden world, and will also enhance the UV-related behavior of your animals. With an energy consumption of only 2W, the Scorpion Light consumes nearly 80% less energy than a conventional night light, and does not interfere with natural nighttime temperature drops.
Thermo Socket PRO - lamp holder with hinge - Ready to use vivarium lamp with porcelain lamp holder
Already wired, thanks to special mounting accessoires and an connetcor the lampholder can be installed inside the vivarium without having to take it apart
With high quality silicon power cable for lamps up to 300W
Can be used for incandescent lamps, spot lamps ans UV lamps with E27 Socket
Siutale for use with Lucky Reptile Bright Sun UV (ballast required)
Connector are compatible to Lucky Reptile Bright Control range
Contrary to the simple Thermo Socket lampholder sets the Thermo Socket PRO are completely wired and ready for use. There are no electrical installations necessary.Special mounting accessories and a connector allow the terrarium installation without the need to take the lampholder apart.
The Thermo Socket PRO are also excellent for use with the Lucky Reptile Bright Sun UV lamps as their connector are compatible to the Bright Control ballasts which can simply be attached between lampholder and wall socket.The power lead has a silicon insulation allowing the use of lamps up to 300W including the Osram Vitalux.Of course the Thermo Socket PRO are also compatible to the Lucky Reptile Reflector Sets.
The Plug and Play solution!
Most Popular Model: with hinge! Lampholder can be directed as desired!
Lucky Reptile Bright Control PROAn electronic ballast for metal halide lampsThe Bright Control PRO is an electronic ballast designed for optimal use with the Bright Sun UV lamps.An electronic ballast should be preferred over an electromagnetic ballast as it is more efficient and increases the lamp life. It ensures a smoother operation and increases the effectiveness of the lamp. The spectrum of metal halide lamps will stay fairly constant during its life cycle when using electronic ballasts. Metal halide lamps that are used with an electromagnetic ballasts normally show significant changes in their spectrum especially at their end of life. Only an electronic ballast like the Bright Control PRO can ensure the best light quality.In addition the Bright Control PRO will automatically shut off broken or not igniting lamps for safety reasons.
For the Bright Sun UV lamp we recommend the use of the electronic Bright Control PRO over the conventional Bright Control gear box to ensure best possible operation. Apart from the technical advantages it is also much smaller.
Exo Terra Compact Top - terrarium cover but is supplied with built-in reflector without bulbs.
Fits one or more Exo Terra compact fluorescent or incandescent bulb (maximum 26 W)
With built-in reflector
Easy to install
Sliding rim to mount accessories
The Exo Terra Compact Top Canopy is a compact fluorescent terrarium canopy designed for use with the Exo Terra Glass Terrarium. This easy-to-install canopy accommodates compact fluorescent bulbs or low wattage incandescent bulbs. A combination of different Exo Terra ReptiGlo compact fluorescent bulbs can be used (PT2226 / PT2227 / PT2228) to create the ideal ultraviolet/visual light ratio or a combination with an incandescent light source such as the Daytime Heat Lamp to increase the ambient air-temperature. Optional accessories such as the Exo Terra Digital Thermometer and Hygrometer and the Exo Terra Thermostat and Hygrostat can be slid into the special sliding rim on the top of the canopy.
JBL TempSet basic Installation kit for lamps in terrariums - For more safety in the terrarium: installation kit for lamps in terrariums.
For more safety in the terrarium: installation kit for lamps in terrariums.
For the safe operation of energy-saving and incandescent lamps, halogen spot lamps, neodymium spot lamps, UV spot lamps (only in a vertical position) and ceramic lamps
Easy to install: mounting plate, screws and switch are pre-assembled
Heat and dimension stable to 270 °C
Package contents: installation kit for spotlights E27 in terrariums, TempSet basic
Modelled on natureTerrarium animals are cold-blooded animals, which are strongly dependent on light, particularly on the quality and intensity of the light. Activity, food intake, digestion or rest phases are influenced by the change of day and night. Depending on the light source, there are differences in output and quality of the light.
Safe light sourceThe installation kit is suitable for the safe operation of energy-saving and incandescent lamps, halogen spot lamps, neodymium spot lamps, UV spot lamps (only in a vertical position) and ceramic lamps. It is made of a dedicated high-tech material with heat resistance up to 270 °C. The installation is easy thanks to its pre-assembled mounting plate, screws and switch.
Trixie Reflector Clamp Lamp with safety guard and Pro-Thermal-Socket.
particularly thermally resistant ceramic bulb holder with silicone cable
polished reflector efficiently strengthens the UV-B radiation and therefore enables a greater distance between animal and lamp
can be used in the terrarium as a clamp lamp, free-hanging or as a permanent fixture
enclosed safety guard prevents animals from coming in too close contact with the lamp and suffering burns
cable with switch
black
assembly instructions included
The Reptile Jungle Lamp Set with transformer
waterproof
low voltage lamp
perfect for rainforest vivariums
This special low voltage lamp is waterproof as to the IP68 standard, making it perfect for rainforest vivariums and turtle tanks where the use of normal, not humidity protected porcelain lampholders is risky or even not allowed. The Jungle Lamp is a 12V luminaire which requires a halogen transformer for operation. The installation inside the vivarium can be done with the supplied holding arms allowing to point the lamp in the desired direction. Available is a set which contains one Jungle Lamp and a transformer (20-105W). Additional Jungle Lamps can be purchased separately and attached to the transformer. A mixed operation with Thermo Socket LV lamps is alos possible. With its wattage range of 20W to 105W the transformer can operate a single 20W lamp but also multiple lamps with a maximum of 105W. E.g. you can attach two Jungle Lamps with 50W halogen lamps (2x50W = 100W) or three luminaires with 35W lamps (3x35W = 105W). The theoretical maximum is 5 luminaires with 20W lamps. The Jungle Lamp is designed for use with the Lucky Reptile Halogen Sun LV. The use of standard halogen lamps which project the heat to the back or side is not allowed.
Lucky Reptile Thermo Socket PRO - Suspension lamp holder
for use lamps up to 300W
ready for use
no electrical installations necessary
compatible to the Bright Control
Contrary to the simple Thermo Socket lampholder sets the Thermo Socket PRO are completely wired and ready for use. There are no electrical installations necessary.Special mounting accessories and a connector allow the terrarium installation without the need to take the lampholder apart.
The Thermo Socket PRO are also excellent for use with the Lucky Reptile Bright Sun UV lamps as their connector are compatible to the Bright Control ballasts which can simply be attached between lampholder and wall socket.The power lead has a silicon insulation allowing the use of lamps up to 300W including the Osram Vitalux.Of course the Thermo Socket PRO are also compatible to the Lucky Reptile Reflector Sets.
The Plug and Play solution!
Most Popular Model: with hinge! Lampholder can be directed as desired!
Lucky Reptile - Thermo Socket Plus Reflector
These high quality reflector lamps have an E27 porcelain lampholder, a high quality steel reflector, wire mesh protector and a silicon power lead.
steel reflector
ready for use
suitable for light bulbs up to 300W
different reflector sizes available
The steel reflector focusses the light and acts as sight protection, preventing from being blinded by the light. The wire mesh protector is placed on the bottom of the reflector and prevents that the animals can get in contact with the bulb.
The lamps are shipped ready for use. Mounting accessories for installation inside a terrarium are included but the lamp has to be taken apart for that. For a more convenient installation inside the vivarium versions with connector are available. These can be attached to a surface without having to be taken apart. In addition the connector plugs directly into the Bright Control ballasts. Plug and Play!
A clamp for use as clamp lamp is available separately.
Suitable for light bulbs up to 300W. Two different reflector sizes are available:
Thermo Socket plus Reflector small: for all Halogen Sun and Bright Sun UV lamps as well as the Compact UV Sun.Thermo Socket plus Reflector large: for straight engery saving bulbs and mercury vapour UV lamps
All versions are suitable for use with 300W lamps!
Swing bracket for Jungle Dawn LED
This Swing bracket for the Jungle Dawn LED from Arcadia is a specially designed product that is very easy to install and illuminates your terrarium even more effectively! The JUNGLE DAWN LED Swing-Holder Set ® with 5 possible setting angles fits perfectly and is the perfect addition to the Jungle Dawn LED.
CHF 39.90
❅
❆
❅
❆
❅
❆
❅
❆
❅
❆
❅
❆
This website uses cookies to ensure the best experience possible. More information...