Repto Flex 2.0 sprinkler system

Repti Rainforest The Repti Rainforest Sprinkler System is a complete starter kit to equip your terrarium with an automatic watering system.The kit contains1 transformer, 12 volts.3 Adjustable nozzles for mounting on the terrarium.1 water tank.1 water filter. Prevents the nozzles from clogging with dirt.7 metre black water hose. Prevents algae from forming in the hose. 1 multiway distributor for hose connection of up to 3 nozzles. 4 blind plugs 6 bolts1 high-pressure diaphragm pump.

Fogger with timerThe Fogger has a timer for repeated periodic humidification. It can also be used with the humidity controller when constant humidity is required. The canister is equipped with a water supply function to facilitate water supply and dirt removal, which can prevent the growth of bacteria.The open lid design allows water to enter the canister directly when the lid is closed. The large-capacity, transparent 4 liter canister can always provide long-term, continuous humidification, provided there is enough water in the canister.The control panel has electronic touch technology with sensitive buttons, which enables a quick response. The display is equipped with LED technology, which ensures low power consumption and a long service life.The unit is very quiet. The amount of mist can be adjusted in three levels and the power is automatically switched off when there is a lack of water, which makes the unit very safe and reliable.The blower has a quick release feature for easy access, maintenance and service. The air inlet uses a high-permeability activated carbon filter sponge to effectively improve air quality.Press and hold the mist button to activate the sleep mode and press any button to exit the mode. Operation is simple and user-friendly.Adjustable 3-stage foggingEasy to read LED displayAutomatic low water protectionBuilt-in digital timerEasy to fill; easy to cleanCompatible with humidity controllerUnique flexible and adjustable hose designIn a Fogger digital timer package is:Main motorThe water tankLidFlexibleHoseSuction cupsInstruction manualTechnical data:Product dimensions: 200 x 162 x 277 mmInput voltage: 100-240V~ 50/60HzPower: Max.25WFog output: Max.300ml/hCT control range: 0~4 hoursWT control range: 2~120 minutesNoise: ≤35 decibels

Maxi Fogger and humidifierThe compact Fogger & humidifier Maxi is ideal for pets that require a humid environment. Adjustable fogging output (up to 250 ml per hour). Flexible adjustable hose from 45 cm to 150 cm length. Dry run protection, switches off the unit when the tank is empty. Compatible with a wide range of enclosures including vivariums, tanks, cages, terrariums, aquariums, plastic/PVC/acrylic/glass containers.Perfect for a variety of reptiles and amphibians including bearded dragons, geckos, snakes, turtles, iguanas, lizards, chameleons, frogs, crabs, etc.Description of the Fogger & HumidifierRemove all packaging. Place the humidifier base (A) in an accessible place next to your terrarium or inside the area.Before use, unscrew the valve on the black base of the humidifier container (B) and rinse the container with a small amount of soap. Rinse it well until no more soapy water comes out when rinsing.Fill the humidifier container (B) with up to 2 litres of water. Tighten the valve again.Place the humidifier tank (B) on the base (A). Check carefully that the humidifier tank is installed correctly on the base.Plug the larger end of the extendable hose (C) onto the black neck of the humidifier tank.Extend the hose (C) and place the end in/on the top or side of the terrarium. Slide the suction cups down the hose and stick them to the side of the terrarium.Connect the unit. Turn on the switch on the back of the humidifier base (A). Set the control on the front of the unit to the desired output. It may take a few seconds for the output to increase/decrease after adjusting the control.In a fogger and humidifier is:Main unitExtension hoseConnectorTank capSuction cupsWater tankTechnical data:    Maximum power: 32W    Voltage: 220V    Frequency: 50Hz    Maximum capacity: 2,2l    Maximum output 250ml/hInstalling the Fogger and Humidifier MaxiPlace the humidifier horizontally in a suitable place, remove the water tank, unscrew the lid of the water tank and fill it with water. The water temperature must not exceed 40 °C. After filling the water tank completely, remove the water drops and then reattach it to the main unit.Attach the tank cap to the upper part of the water tank. Connect the connector to the water tank lid.Connect the flexible hose to the connector.Attach the suction cups on the glass to flexible hose and adjust the appropriate length of flexible hose.Attach the suction cups to the side or back of the terrarium and point the outlet of the flexible tube towards the inside of the terrarium. Bend the extension tube as little as possible. Damage to the extension tube may result in faulty fogging.Connect the unit to the mains (220/50 Hz) and set the switch on the main unit to the "On" position.Turn the fog output adjustment knob and adjust the fog output according to your needs.The unit is equipped with a low-water cut-out. When the water tank is empty, the sensor switches off the fan and the transformer. As a result, no mist comes out of the flexible hose and the indicator light lights up red. If you want to continue operation, switch off the power and fill the tank with water again.Caution: Do not pour hot water above 40 °C into the water tank to avoid deforming the motor unit. Do not pour water directly into the water tank when the tank is installed on the main unit. Do not pour metal products, chemicals and detergents into the tank.Remove the water from the tank when the ambient temperature is below 0 °C. This could cause frost, which could damage the unit.Do not move the unit while it is in operation. If the appliance is not used for a long time, switch it off and disconnect it from the mains supply

Repto Radiator in two sizes Efficient terrarium heating without light emission The Repto Radiator is the ideal solution for anyone who wants to heat their terrarium efficiently and without light. This high-quality heating plate for reptiles ensures that the ambient air is heated evenly - just like a classic radiator, only specially developed for use in terrariums.Available in two different sizes:16 watts with dimensions of 15.6x10.0x2.8 cm50 watts with a dimension of 25.6x16.0x2.8 cm ✅ The advantages at a glance: Light-free heat radiation - perfect for day and night animals Energy-efficient & quiet - for constant heat output Compatible with thermostats - ideal in combination with on/off or dimmer thermostat for precise temperature control Safe and reliable - suitable for use on mesh panels(no direct contact with animals or water) Versatile - can be used as the main heater or as a supplement to spotlights With its compact dimensions, the Repto Radiator can be flexibly installed in the terrarium. Whether for bearded dragons, geckos, snakes or other heat-loving reptiles - this terrarium heater without light creates a species-appropriate climate around the clock.

Repti Flo 200 The Repti Flo 200 terrarium pump operates with an energy-efficient and maintenance-free motor, which ensures a steady, powerful water flow. It is ideal for improving the oxygen content in the water by ensuring water circulation in aqua-terrariums and paludariums or by creating water flows or waterfalls in the terrarium . This compact pump is fully submersible. The Repti Flo 200 can also be used as a replacement pump for all sizes of the Exo Terra Waterfall (PT2905, PT2906 & PT2907)

Repto Rainmaker extension set with nozzles and hose The Repto Rainmaker extension set is the perfect addition to your automatic irrigation system. With additional nozzles and hose, the humidification in your terrarium or paludarium can be individually extended and optimally adapted. Advantages at a glance Extension set for the Repto Rainmaker 2.0 Contains 4 nozzles with flexible 360° metal nozzles Includes high-quality hose for easy installation Ideal for expanding to larger terrariums or multiple areas With the Repto Rainmaker 2nd extension set (R3300020) you can extend your irrigation system with additional spray points. This means that larger terrariums, paludariums or rainforest setups can also be optimally supplied with moisture.The set includes four robust spray nozzles with flexible 360° metal nozzles that can be individually aligned. This ensures even distribution of the water without directly wetting the animals. The hose supplied enables easy connection to the existing system - without any complicated installation.

Monsoon SOLO - Irrigation system - 1.5 LProgrammable systemLarge 1.5 liter reservoirReservoir can be easily refilledCan be extended by a spray nozzle and therefore also ideal for two terrariums Mist-like effect Long hoses The system can be programmed to rain several times within 24 hours and over a period of 2 seconds to 2 minutes. The large 1.5 liter reservoir ensures continuous operation for several days without the need to refill water (ideal for the vacation season). In addition, the reservoir can be easily refilled without having to remove the entire system. The Exo Terra® Monsoon SOLO II is equipped with an easy-to-install spray nozzle, but can be extended with an additional spray nozzle, making it ideal for two terrariums. (Please note that each additional nozzle means less power at each individual nozzle). The rain produced by the specially designed spray nozzles is extremely fine and creates a mist-like effect in the terrarium. The extra-long hoses make it possible to hide the system in a storage area or in a cabinet under the terrarium, guaranteeing a realistic effect.