JBL Led Solar Nature

Product information "JBL Led Solar Nature"

JBL LED SOLAR NATURE

High performance LED light for freshwater aquariums

A perfect light for your fish, invertebrates and aquarium plants, because the warm white and cold white LEDs are evenly distributed in the light panel.

Maximum light efficiency for beautiful aquatic plants: extremely high photosynthetically active radiation (PAR) of more than 220 µM/s/m2
Plug & play: clip light in tube holder or set it up, connect cable, switch on or dim via remote control and select one of 3 light colours
Evenly distributed warm white and cool white LEDs for a biotope-compatible light climate, 2 channels with 3 preset light colours: 2700 K (warm white), 4000 K (daylight white), 6700 K (cool white)
Expandable through WiFi control via smartphone with preset biotope-compatible or individual light controls and the JBL LED SOLAR EFFECT RGB light for special colour effects
Incl. water-protected light (IP67), remote control, driver (receiver), power supply unit, connection cable, holding brackets for top assembly and end caps for the installation in tube sockets (T5 & T8)

Because LEDs have only really become more energy-saving than fluorescent tubes recently, there has generally been no technology and no demand (!) to optimise the LED light spectrum for aquarium plants. Up to now LEDs have only been used in the technical sector and in the home. The light spectrum of aquatic plants, however, varies considerably from the spectrum in the home or the LEDs for torches. Here it is a matter of the photosynthetically active radiation range, called PAR (Photosynthetic Active Radiation), and a full spectrum which contains the TOTAL range within the visible light spectrum. Only with those two components could the perfect light for aquarium plants be manufactured!
Since JBL was the first manufacturer worldwide to develop a full spectrum modelled on sunlight with its JBL SOLAR fluorescent tubes, our development department didn’t just want to use the available home spectrums for LED aquarium technology, it wanted to create a SOLAR full spectrum, especially for aquariums! This took some time – but now it is available!
The very special features of the new JBL LED SOLAR lights:

The JBL LED SOLAR Lamps are suitable as replacements for ALL fluorescent tube lengths
together with the light the basic equipment JBL SOLAR Natur contains a remote control unit for simple and professional control
The JBL LED lights have a full spectrum and are plant-optimised due to their high PAR values (photosynthetically active radiation). That is an achievement of our JBL research!
Convenient holders enable installation in existing T5 and T8 tube end caps, plug-on holders, made of stainless steel, are of course also included.
Also compatible with a light computer which can be steered by mobile phone. This enables light values for various biotopes, incl. rainy season, clouds and thunderstorm
Includes a special program to accustom plants to the strong LED lighting

Article No. Mass         Watt
CO-JB61902.00    438mm      22W
CO-JB61903.00    549mm      24W
CO-JB61904.00    742mm      37W
CO-JB61905.00     849mm     44W
CO-JB61906.00     1047mm    57W
CO-JB61907.00 1149mm    59W
CO-JB61908.00     1449mm    68W

The JBL LED Solar Controll Wifi and the LED Solar Effect can be combined with the LED Nature

Watt:	22 Watt

Composition

Feeding recommendation

Technical details

Size information

1 of 1 reviews

5 out of 5 stars

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

Sort by

September 23, 2020 20:04

Eclairage très sympa ! facile à installer

Eclairage très sympa ! facile à installer la longueur réglable est très pratique ! un peu cher

Zubehör

JBL Solar LED

JBL LED Solar Nature, JBL LED Solar Effect and JBL LED Solar Control WiFi An absolute special offer - switch to LED lighting today and benefit from this unique offer. You get two lights plus the WiFi Control for a one-off special price! Click here for the individual product descriptions: LED Solare Nature LED Solare Effect LED Solare WiFi Control

CHF435.00 CHF547.00 (20.48% saved)

Details

Zubehör

JBL LED Solar Effect

JBL LED special light Solar Effect LED effect light as a supplement to the JBL LED Solar NatureIf you want to set special lighting effects such as colored light, red sunrise and sunset, deep blue water or Gwiter in addition to your existing light, you need a second light, called JBL Solar Effect.The LED light can be connected to the main light via the supplied cable divider. With the remote control included in the JBL LED Solar Natur you can now control the individual color channels (red / green / blue).For the control of the effects (biotopes, thunderstorms, clouds, rain, etc.) they need the special controller JBL LED Solar Control WiFi, which they can then control easily and simply via their mobile phone. Special luminaire with RGB LEDs to create color effects, usually as a replacement for second, colored tube (T5 or T8) Simply connect to the existing JBL LED Solar Naur with the included cable divider and control it via its remote control Enables colorfully dramatic simulations of sunrises and sunsets as well as weather simulations such as thunderstorms and rainy seasons The built-in RGB LEDs can produce red, green and blue as well as all mixed colors, individually selectable via the remote control of the JBL LED Solar Nature Dimmable in 7 steps Extendable effects with JBL LED Solar Control WiFi control via mobile phone Contains: waterproof LED effect luminaire (IP67), cable switch, ride-on mounting bracket and end caps for mounting in tube sockets (T5 and T8) Article No. Mass WattCO-JB61911.00 438mm 8WCO-JB61912.00 549mm 9WCO-JB61913.00 742mm 13WCO-JB61914.00 849mm 15WCO-JB61915.00 1047mm 16WCO-JB61916.00 1149mm 19WCO-JB61917.00 1449mm 20W

CHF123.00

Details

JBL LED Solar Hanging

LED Solar Hanging A kit to hang up JBL LEDs. It includes 2 screws and dowels as well as two 150 cm stainless stell threads to easily hang your LEDs. For hanging a JBL LED SOLAR lamp (natural or effect) from the ceiling Attach the stainless-steel cable to the designated point on the JBL LED SOLAR lamp, fasten the special brackets to the ceiling and hang down to the desired length. Shapely (rustproof) stainless-steel cables, each 150 cm long, can be shortened Easy to install in just a few minutes by simply attaching to the luminaire and to the ceiling with special cable holders Scope of delivery: 2 dowels & 2 screws with 2 special sockets (for ceiling), 2x 150 cm stainless-steel cable

CHF32.90

LED Solar Control

JBL LED Solar Control With the remote control included in the JBL LED SOLAR Natur you have the possibility to gradually dim the light and choose from three color temperatures.As soon as you complete your JBL LED SOLAR Natur (ideally in combination with JBL LED SOLAR Effect) with the JBL LED SOLAR WiFi Control, a new world of control opens up for you:With the help of the JBL LED SOLAR WiFi Control you can download biotope data from the Pantanal (southwestern Brazil) or from the region of the East African Grabenbruch lakes (Malawi-Tanganyika). Your LEDs will then adjust the local climate situations depending on the season (including dry and rainy seasons, thunderstorms & cloud cover).For a goldfish aquarium, the lighting will emphasize the beautiful colors and a company aquarium will set a light that will show a 10-day sun day, the right light for plants and strong colors for the fish. Thunderstorms and clouds are recorded by a random generator.For friends of aquariums (aquascaping) there is a light program similar to the program for community aquariums, but with higher light intensity.With each program, the acclimatization mode can be chosen initially, making it easy for your plants to adapt to the much brighter light from the previous fluorescent light fixtures without causing problems. Of course, any program can be chosen without acclimation.You can also set self-selected lighting situations in a manual mode.For all the mentioned programs you have 2 LED lamp types available: 1.) JBL LED SOLAR nature and 2.) JBL LED SOLAR Effect. If you only operate the JBL LED SOLAR Nature without the JBL LED SOLAR Effect with the JBL LED SOLAR WiFi Control, you can achieve all functions such as thunderstorms, clouds as well as sunrise or sunset, but without colored effects! For the control of JBL LED SOLAR Nature individually or in combination with JBL LED SOLAR Effect. Control biotope data, effects, thunderstorms, sunrise and sunset via WiFi from your mobile phone Easy to use: replace existing IR receiver with JBL WiFi Control and control desired effects via app 5 programs available + additional program for manual input (biotope South America & Africa, aquascaping plants, goldfish, community aquarium, any program with acclimatization) Biotope data includes dry and rainy season, cloud cover, thunderstorms and sunrise and sunset Scope of supply: WiFi control unit for insertion into the JBL LED SOLAR system for 2 lights, required app is always free

CHF245.00 CHF275.00 (10.91% saved)

Suggested products

sera LED precision light 6W/12V

LED light 6W/12VSmall clamp lamp suitable for small aquariums and nano tanks. The lamp has a clamp with a base for mounting. With three, two-watt LED chips, the lamp illuminates a width of 40 cm. The reflector is also still protected for safety with a transparent film and behind it are the LED chips. The LED chips are held with a bayonet ring, which holds the chips first well and makes the exchange with other LED chips very easy. No active cooling needed on the side3 x 2 W daylight SMD LED chipsHigh life Extremely energy efficient Clamps up to 15 mm material thickness

CHF72.90

Sera Nano LED light 4W

Nano LED Light A small LED lamp, perfect for your nano tank. The simple design fits any aquarium and does not distract the focus from the fish and aquarium. The lamp can be attached to aquarium with up to 12 mm glass thickness, making it suitable for any nano tank. The lamp also has an aluminum reflector for optimal lighting. The two small chips emit the light and are both 2 watts each. The two chips are held by a bayonet ring and can also be easily replaced. A transparent insert on the bottom of the lamp protects against splashing water. The lamp can be easily attached by means of clamping device and easily aligned with gooseneck. Reflector and gooseneck with black paint.2 x 2 W daylight SMD LED chipsEasy to replace light chipsVery long life Up to 12 mm clamping width

CHF56.90

sera LED Moonlight Set 180mm

Sera LED Moonlight SetFor individual and varied moonlight control and lighting. With the Moonlight Set, the Synodic Moon can be simulated and also customized. The individual successive moon phases generated by the Moonlight Timer are reproduced in the dark phase of the aquarium night after night in individually adjustable brightness and duration, with gentle moonrise and moonset. The exciting illumination makes for some interesting aquatic viewing. Thanks to the moon phase setting, your aquarium inhabitants can enjoy the moon phase shifts just like in nature. 10000 - 12000 Kelvin173 lm, 20 V, 3 W, energy efficiency class A+simulates the moonlight and its phase shifts

CHF66.90

Sera LED Daylight sunrise

LED Daylight sunrise An LED lamp that perfectly simulates a natural daylight. The Daylight Sunrise lamp can perfectly simulate the sunset and sunrise with its light color spectrum and with a Sera Light dimmer. In an aquarium with fish, the majority of which swim higher up, it is important to give them natural lighting that resembles the sun. The lamp can simulate foggy days and a misty sky with its color spectrum of 6000 to 8000. Available in different sizesSimulates sunrise - sunsetFor fish that like to swim higher up

From CHF35.90

Details

JBL Solar LED

Grösse (1): Aquariengrösse 45-70cm | Grösse (4): Aquariengrösse 45-70cm

CHF435.00 CHF547.00 (20.48% saved)

LED Aqua Spot

Watt: 10 Watt

SuperFish Aqua LED Spot 10W or 14W This slim-line design light is perfectly suited for open aquariums and is equipped with a high-power LED. The LED is characterised by high brightness and long service life. Par 183, Lux 11300, Kelvin 6400 Ensures excellent plant growth Safe (DC 20 Volt) Waterproof (IP68) for safe use Suitable for tropical and cold water aquariums Maximum glass thickness of 10 mm Very easy installation With 2 years warranty and complete instructions for use

CHF44.90

Trocal LED freshwater aquariums

Watt: 18W / 40cm

Trocal LED - For all freshwater aquariums The aquarium light with the highest output density in its price range - More light for your money!Thanks to its high-quality LEDs, it boasts very high output density, optimum heat management and a long service life of approx. 80,000 operating hours. This is ensured by the ceramic substrate on which the LEDs are manufactured. This provides better heat dissipation than plastic, with the result that a very high luminous flux can be created with a very long service life and low loss of luminous flux over the period of use. This means high light intensity is always guaranteed, even with a small number of LEDs, while at the same time power consumption is low.The high light density promotes optimum plant growth and fish gleam in their finest colours. In addition, the subtle "shimmering effect" gives every aquarium that certain something, as the light patterns look like natural sunlight.Optimised illumination and colour rendering: Very good colour rendering (CRI: 85) Angle of radiation: 130° - for optimum illumination Optimum colour temperature for plants and fish (5,500 K) Spectrum for excellent plant growth With pleasant „shimmering effect“ Outstanding output values: Particularly high output density: 60 W/m or. 5,600 lm/m (board length) High energy efficiency: 120 lm / W (LED module) One Trocal LED replaces 2 T5 tubes Quality and long service life: High-quality CREE LEDs for optimum performance Optimised thermal management thanks to CoolCeramics technology (Multi-Layer Ceramic Chip Carrier) for a long service life Average service life of LED module: 80,000 operating hours (LM 80) = approx. 22 years at 10 hrs./day. LED module in a high-quality aluminium housing With universal mount made of V4A stainless steel for all aquaria. Convenience: Modern design with compact dimensions Easy to install, adjustable length.

CHF189.00

JBL Led Solar Nature

Watt: 22 Watt

JBL LED SOLAR NATURE High performance LED light for freshwater aquariumsA perfect light for your fish, invertebrates and aquarium plants, because the warm white and cold white LEDs are evenly distributed in the light panel. Maximum light efficiency for beautiful aquatic plants: extremely high photosynthetically active radiation (PAR) of more than 220 µM/s/m2 Plug & play: clip light in tube holder or set it up, connect cable, switch on or dim via remote control and select one of 3 light colours Evenly distributed warm white and cool white LEDs for a biotope-compatible light climate, 2 channels with 3 preset light colours: 2700 K (warm white), 4000 K (daylight white), 6700 K (cool white) Expandable through WiFi control via smartphone with preset biotope-compatible or individual light controls and the JBL LED SOLAR EFFECT RGB light for special colour effects Incl. water-protected light (IP67), remote control, driver (receiver), power supply unit, connection cable, holding brackets for top assembly and end caps for the installation in tube sockets (T5 & T8) Because LEDs have only really become more energy-saving than fluorescent tubes recently, there has generally been no technology and no demand (!) to optimise the LED light spectrum for aquarium plants. Up to now LEDs have only been used in the technical sector and in the home. The light spectrum of aquatic plants, however, varies considerably from the spectrum in the home or the LEDs for torches. Here it is a matter of the photosynthetically active radiation range, called PAR (Photosynthetic Active Radiation), and a full spectrum which contains the TOTAL range within the visible light spectrum. Only with those two components could the perfect light for aquarium plants be manufactured!Since JBL was the first manufacturer worldwide to develop a full spectrum modelled on sunlight with its JBL SOLAR fluorescent tubes, our development department didn’t just want to use the available home spectrums for LED aquarium technology, it wanted to create a SOLAR full spectrum, especially for aquariums! This took some time – but now it is available!The very special features of the new JBL LED SOLAR lights: The JBL LED SOLAR Lamps are suitable as replacements for ALL fluorescent tube lengths together with the light the basic equipment JBL SOLAR Natur contains a remote control unit for simple and professional control The JBL LED lights have a full spectrum and are plant-optimised due to their high PAR values (photosynthetically active radiation). That is an achievement of our JBL research! Convenient holders enable installation in existing T5 and T8 tube end caps, plug-on holders, made of stainless steel, are of course also included. Also compatible with a light computer which can be steered by mobile phone. This enables light values for various biotopes, incl. rainy season, clouds and thunderstorm Includes a special program to accustom plants to the strong LED lighting Article No. Mass WattCO-JB61902.00 438mm 22WCO-JB61903.00 549mm 24WCO-JB61904.00 742mm 37WCO-JB61905.00 849mm 44WCO-JB61906.00 1047mm 57WCO-JB61907.00 1149mm 59WCO-JB61908.00 1449mm 68WThe JBL LED Solar Controll Wifi and the LED Solar Effect can be combined with the LED Nature

CHF149.00

Daytime lightbar matrix

LED Daytime matrix: matrix 20.0

Modular LED system for aquariums The matrix light bars from daytime are the logical extension of the LED aquarium lights. The sum of all properties of this system sets new standards. The light bars are suitable for freshwater and saltwater aquaristics. Thanks to the modular system, the individual LED modules can be mounted independently in the light bar. This allows for the greatest possible individual lighting solution for your aquarium. Highend customizing - Module assembly by the aquarium owner various adapter sets for integration of the "matrix" on the aquarium Special LEDs for seawater aquaria "Royal Blue 440 - 455 nm" all aluminum components seawater resistant anodised (according to DIN81249-1) Bezeichnung(Grösse) Profillänge max. Modulanzahl matrix 20.0 16,6cm 1 St. - 10 Watt matrix 30.0 25cm 2 St. - 20 Watt matrix 40.0 35cm 3 St. - 30 Watt matrix 50.0 45cm 4 St. - 40 Watt matrix 60.0 55cm 5 St. - 50 Watt matrix 70.0 65cm 6 St. - 60 Watt matrix 80.0 75cm 7 St. - 70 Watt matrix 90.0 85cm 8 St. - 80 Watt matrix 100.0 95cm 9 St. - 90 Watt matrix 110.0 105cm 10 St. - 100 Watt matrix 120.0 115cm 12 St. - 120 Watt matrix 130.0 125cm 13 St. - 130 Watt matrix 140.0 135cm 14 St. - 140 Watt matrix 150.0 145cm 15 St. - 150 Watt matrix 160.0 155cm 16 St. - 160 Watt matrix 170.0 165cm 17 St. - 170 Watt matrix 180.0 175cm 18 St. - 180 Watt matrix 190.0 185cm 19 St. - 190 Watt matrix 200.0 195cm 20 St. - 200 Watt matrix 210.0 205cm 22 St. - 220 Watt matrix 220.0 215cm 23 St. - 230 Watt matrix 230.0 225cm 24 St. - 240 Watt matrix 240.0 235cm 24 St. - 240 Watt matrix 250.0 245cm 24 St. - 240 Watt matrix 260.0 255cm 24 St. - 240 Watt matrix 270.0 265cm 24 St. - 240 Watt matrix 280.0 275cm 24 St. - 240 Watt matrix 290.0 285cm 24 St. - 240 Watt matrix 300.0 295cm 24 St. - 240 Watt matrix 310.0 305cm 24 St. - 240 Watt matrix 320.0 315cm 24 St. - 240 Watt matrix 330.0 325cm 24 St. - 240 Watt matrix 340.0 335cm 24 St. - 240 Watt matrix 350.0 345cm 24 St. - 240 Watt matrix 360.0 355cm 24 St. - 240 Watt matrix 370.0 365cm 24 St. - 240 Watt matrix 380.0 375cm 24 St. - 240 Watt matrix 390.0 385cm 24 St. - 240 Watt matrix 400.0 395cm 24 St. - 240 Watt

CHF159.90

Fluval Plant spectrum LED 3.0

Grösse (1): 61-85cm | Grösse (4): 61-85cm

Fluval Plant 3.0 LED Light Fluval Plant spectrum LED is designed for hobbyists who want to maintain a thriving live plant aquarium. Featuring FluvalSmart App technology, the light offers a variety of customizable features controlled on your mobile device. This includes an adaptable color spectrum that supports strong plant growth thanks to the unit’s 6 unique LED band waves. Additionally, a programmable 24-hour light cycle produces gradual sunrise, sunset and night settings for a truly natural effect. Precision-engineered in Germany and backed by a generous 3-year warranty, the Fluval Plant LED offers incredible quality and value. Everything included - control is via the free app, so no additional controller is necessary. No additional controller necessary any more Programmable 24-hour lighting cycle Customisable colour spectrum Can also be controlled manually (on, off, dim) Three preset lighting configurations Uniform illumination over 120 Extendable brackets included T5/T8 brackets are optional Waterproof to IP67 Suitable for fresh water Developed in Germany Approx. 50,000 hours life expectancy This luminaire contains built-in LED lamps. The lamps cannot be replaced in the luminaire. Fluval Plant Spectrum 3.0 LED available in 3 sizes:61-85 cm, 168 LEDs, 32 W, 2350 lm, 6500 K91-122 cm, 252 LEDs, 46 W, 3300 lm, 6500 K122-147 cm, 336 LEDs, 59 W, 4250 lm, 6500 K

CHF229.00

Pond Fogger LED Lithting SuperFish

SuperFish Pond Fogger Ultrasonic nebulizer with LED light (colour changer - the colour cannot be adjusted) diameter 12 cm Water depth at least 7 cm For Pond: The SuperFish Pond Fogger + LED lighting can easily generate a mysterious fog on our pond. Especially in the evening it creates a special atmosphere, when the low-hanging fog is illuminated by the built-in LEDs and moves slowly over the pond water. This Pond Fogger operates best in a small pond, the effect will be less in a large pond. The Fogger floats on the water, the surface water is slowly atomized by an ultrasonic vibration. No Chemicals are involved, so completely environmentally friendly and safe for your fishes. Equipped with 10 meter cable an fully waterproof (IP68) For open aquariums:Also an eye-catcher on an open aquarium - a mist forms on the surface. An additional effect is that the humidity in the room is increased, so to speak a humidifier for the living room.The long cable would not be necessary, but this can be easily stored in the cabinet.The light does not disturb the fish, because it does not shine so strongly.For terrariums:Can also be used in a terrarium. The fog increases the humidity.Because the Pond Fogger floats, the ultrasonic fogger is always at the right water level.Tip: Put a glass vase with a diameter of about 12 cm (be careful to include the cable - it is best to take the Fogger with you when you buy the vase) into the terrarium and fill it with water.The fog will then overflow the edge and thus provide humidity in the terrarium and the effect is great.You can also stick moss on the vase, so the whole thing looks natural.Do not use it in swimming ponds (or bathtubs) - that means not when people are in the water.This is a note on the manufacturer's instructions for use.The device has a transformer and the fogger in the water is supplied with low voltage (24V). To my knowledge this is not dangerous for humans or animals.

CHF44.90

NANO Style LED attachable light

Watt: S - 3W

LED attachable light for Nano fresh water aquaria NANO Style LED Modern design - elegant and compact Easy to install - for panes of up to 3-10 mm /4-5 mm thickness Excellent growing light with natural colour rendering Vivid light - 6500K, with shimmering effect Durable - Osram LEDs, 50,000 burning hours Safe - Low Voltage 100 Lumen (S) / 500 Lumen (M) Made in Europe State-of-the-art aquarium accessories from Dennerle combine functionality with design. The Dennerle Nano Style LED has been designed for Nano Cubes with a capacity of 2-10 liters (model S) or 10-30 liters (model M). Model For aquarium sizeS - 3W 2 - 10 litresM - 6W 10 - 30 litresL - 8W 30 - 60 litres

CHF65.00