Sera LED extension cableExtension cable for the Sera LED series. It may happen that when you connect your Sera LED, you noticed that your cables are not long enough. For such cases, there is the Sera extension cable. The cable 1.2 m long and can make your life much easier.1.2 m cable. To connect to Sera cable connections

Sera ballastFor powering the Sera LED Tubes.The Sera Driver is necessary for powering the Led Sera Tubes. However, it does not only output current, but can supply multiple tubes with a Triple Cable. The current capacity is optimally utilized thanks to the Driver. The device is necessary for a power supply of the Sera TubesRegulates the power supply if multiple tubes are connected. The recommendation for wattage distribution is as follows: Max. Consumption < 20 watts sera LED ballast 20 V DC 1 A Consumption < 60 watts sera LED ballast 20 V DC 3 A

Sera Tube Holder Clear 2 pcsClear acrylic tube holder for Sera LED tubes.The holder allows you to hang the light as you wish. The bracket is made of a solid acrylic and its simple design ensures that the aquarium is still the main focus. Adjustable up to 13 mm. For hanging Sera LED tubesFixed acrylic glass

LED Triple CableA triple power distributor for Sera LED Tubes.The Sera Triple Cable, together with a Sera Driver, can give power to three different lamps or dimmers. The distributor gives the optimal amount of power for each lamp connected.

Sera LED Digital DimmerWith the Digital Dimmer, you can control your Sera LED lamps. The dimmer makes it possible for you to change the brightness and light intensity in the aquarium. This means you can always adjust the brightness to your fish inhabitants. The dimmer can also be programmed to turn the light on and off, as well as the whether the lighting slowly increases or decreases. In combination with a LED Sunrise Tube Change and the adjustable time, you can achieve perfect a sunrise and sunset. For an even greater natural feeling you can also determine the cloud situation.Compatible with all Sera LED productsSimulate natural weather 

Ultra seal fluorescent lighting controller A controller for lighting tubes. Comes with waterproof ultra seal lamp leads, universal mounting brackets and starter.

LED Controll by JBL With the remote control included in the JBL LED SOLAR Natur you have the possibility to gradually dim the light and choose from three color temperatures.As soon as you complete your JBL LED SOLAR Natur (ideally in combination with JBL LED SOLAR Effect) with the JBL LED SOLAR WiFi Control, a new world of control opens up for you:With the help of the JBL LED SOLAR WiFi Control you can download biotope data from the Pantanal (southwestern Brazil) or from the region of the East African Grabenbruch lakes (Malawi-Tanganyika). Your LEDs will then adjust the local climate situations depending on the season (including dry and rainy seasons, thunderstorms & cloud cover).For a goldfish aquarium, the lighting will emphasize the beautiful colors and a company aquarium will set a light that will show a 10-day sun day, the right light for plants and strong colors for the fish. Thunderstorms and clouds are recorded by a random generator.For friends of aquariums (aquascaping) there is a light program similar to the program for community aquariums, but with higher light intensity.With each program, the acclimatization mode can be chosen initially, making it easy for your plants to adapt to the much brighter light from the previous fluorescent light fixtures without causing problems. Of course, any program can be chosen without acclimation.You can also set self-selected lighting situations in a manual mode.For all the mentioned programs you have 2 LED lamp types available: 1.) JBL LED SOLAR nature and 2.) JBL LED SOLAR Effect. If you only operate the JBL LED SOLAR Nature without the JBL LED SOLAR Effect with the JBL LED SOLAR WiFi Control, you can achieve all functions such as thunderstorms, clouds as well as sunrise or sunset, but without colored effects! For the control of JBL LED SOLAR Nature individually or in combination with JBL LED SOLAR Effect. Control biotope data, effects, thunderstorms, sunrise and sunset via WiFi from your mobile phone Easy to use: replace existing IR receiver with JBL WiFi Control and control desired effects via app 5 programs available + additional program for manual input (biotope South America & Africa, aquascaping plants, goldfish, community aquarium, any program with acclimatization) Biotope data includes dry and rainy season, cloud cover, thunderstorms and sunrise and sunset Scope of supply: WiFi control unit for insertion into the JBL LED SOLAR system for 2 lights, required app is always free

Daytime® Converter In order to commission a daytime® LED system, an LED converter is required. Our converters are protective low-voltage power supplies according to DIN 61347-2 for the operation of daytime® LED systems. The sum of the LED light output, the eco- and / or cluster lights connected to a converter must not exceed the converter rated power.

Basic Control BC16 1-channel for matrix & penix With the Basic Control you can simulate sunrise and sunset simulations with natural light conditions during the day and at night. Duration adjustable in 6 stages from 0-60 minutes - light control with excellent price-performance ratio. 3 switching times day - night - break simple operation and programming via 3 buttons and a status LED directly on the device separately adjustable brightness for daylight or nightlight Demonstration operation with constantly changing day and night light Manual dimming possible in real time internal 24-hour clock (with approx. 15 minutes power reserve) shapely and valuable housing with comfort control buttons "Plug & Play" control is simply plugged in between converter and luminaire, also later! Operation of luminaires of the daytime® line matrix or pendix with up to 240W (24 matrix LED modules)

2-way distributor to matrix With the distributor, up to 2 matrix LED lights can be supplied with a converter at the same time. It must always be ensured that the overall line of the luminaires does not exceed the rated power of the converter used.

EHEIM Power LED Connector for additional lights for EHEIM powerLED Stripes   Possible connection of several lamps to one power supply unit with Y-adaptor

Daytime Verteiler (3-fach) Ermöglicht den Anschluss von bis zu 3 eco- und/oder cluster-Leuchten an einen Converter bzw. einer Lichtsteuerung. Die Gesamtleistung der Leuchten darf die Converter-Nenn-Leistung nicht überschreiten.

T8 adapter set To accommodate existing T8 lamp sockets (tube holders) The conversion of an aquarium with conventional light bars or covers for fluorescent tubes with a diameter of 26 mm (T8 standard) is done with this adapter set. The mounting elements can be adjusted in width and adapted to the lampholder spacing.The matrix LED luminaires can be quickly and easily inserted into the existing tube holders (sockets). The matrix is not powered via the lampholders.The distance between the centre of the tube holder and the bottom edge of the matrix is 45 mm.The used aluminium alloy - typical for daytime® - corresponds to the seawater resistance according to DIN 81249-1. These adapters do not work in JUWEL® aquariums because the distance between the tube holders and the water surface is too small.Our adapter profiles are the optimum solution for JUWEL® aquariums.The dimension between the centre of the tube holder and the lower edge of the lamp is 45 mm.

Daytime Lichtsteuerung Dimm-Modul 1-Kanal Manueller Handdimmer Einstellbarer Auto-Softstart „Sonnenaufgang“ (0 – 180 Sek.) 0(1) – 10V-Schnittstelle Für Aquariencomputer etablierter Hersteller Wird zwischen Converter und Leuchte gesteckt „Plug & Play“ (PnP) Inkl. Verbindungsleitung für GHL ProfiLux Aquariencomputer Varianten Lichtsteuerung Daytime: Die elektronische Ansteuerung und Regelung der eco erfolgt durch die Lichtsteuerung “Lighting Control LC14″ in der 1-Kanal-Ausführung. Die max. Belastbarkeit ist abgestimmt auf den leistungsstärksten Converter. Diese beträgt 100 Watt. Erhältliche Leistungs-Erweiterungs-Module “PEM14 1-Kanal” ermöglichen eine Leistungserhöhung um 100 Watt je Modul. Eine einzelne Lighting Control LC14 steuert bis zu 255 Erweiterungs-Module. Diese Lichtsteuerung kann auch nachträglich in bereits vorhandene daytime® LED-Beleuchtungssysteme der eco-Linie integriert werden. Ebenso kann das manuelle 1-Kanal daytime® Dimm-Modul durch die elektronische Variante LC14 1-Kanal ersetzt werden.

matrix Cord suspension set matrix rope suspension set Continuously height-adjustable stainless steel wire rope suspension High quality stainless steel wire rope suspension for free suspension of a matrix luminaire above the aquarium. The height of the lamp can be easily adjusted without tools. The length of the wire ropes is 2 metres.

Daytime Adapter-Profil für Juwel-Aquarien Die einfache und professionelle Lichtlösung für Ihr Aquarium von Juwel. Das JUWEL®-Adapterprofil ermöglicht es Ihnen ganz einfach auf daytime® LED-Beleuchtung umzusteigen. Entfernen Sie den Leuchtbalken inklusive der Halterung und ersetzen Sie ihn durch das Juwel®-Adapterprofil. Das Profil kann sowohl Leuchten der eco-Linie als auch cluster-Linie aufnehmen. Die original JUWEL® Klappendeckel können passgenau in das Adapterprofil eingesetzt werden. Die Verwendung 1 Der bestehende Leuchtbalken wird komplett entnommen und durch das daytime-Profil ersetzt. 2 Das Adapter-Profil ist optimal an die Gegebenheiten Juwel-Aquariums angepasst und kann zur Wartung und Pflege Ihres Beckens verschoben werden. 3 Mittig angeordnet, erstrahlt Ihr Aquarium mit daytime® bald in neuem Glanz. 4 Kein Schrauben und kein Bohren – und alles sitzt. Die vorhandenen Originalklappen können 1:1 weiterverwendet werden. Technische Details Hier finden Sie das passende Adapter-Profil für Ihr Aquarium von JUWEL®. Adapterprofil Profillänge JUWEL® Beckenbreite passend für JUWEL® Aquarium passende eco oder cluster JUWEL® 55 534 mm - Trigon 350 (hinten) 50.x JUWEL® 60 593 mm 61 cm Lido 120  60.x JUWEL® 70 693 mm 71 cm Lido 200 | Trigon 190 70.x JUWEL® 80 793 mm 81 cm Rio 125 80.x JUWEL® 90 903 mm 92 cm Vision 180 90.x JUWEL® 100 993 mm 101 cm Rio 180 | Trigon 350 (vorne) 100.x JUWEL® 120 1192 mm 121 cm Rio 240 | Rio 300 | Vision 260 120.x JUWEL® 150 1492 mm 151 cm Rio 400 | Vision 450  150.x

Juwel NovoLux Day Control - For controlling a NovoLux LED lamp with individual sunrise and sunset The NovoLux Day Control is the perfect complement to your NovoLux LED lamp. It enables you to quickly and easily program an individual light profile for a NovoLux LED lamp with two dimming phases (sunrise and sunset). The start times for the two dimming phases (sunrise and sunset) may be defined individually. Additional features: Easy programming Programmable individual sunrise and sunset Programmable individual dimming duration Plug'n'Play

HeliaLux SmartControl - the clever control of HeliaLux task lights With the HeliaLux SmartControl, you can program and control your HeliaLux task lights conveniently via WLAN - whether with a mobile phone, tablet or PC. Individual controllable daily routines with 8 scenes Up to 7 light profiles programmable Separate control of the blue and white LEDs Blue moonlight illumination

Time switch 24 hours for aquariums and terrariums Time switch mechanically White 24h aquariums, vivariums and other illuminants

HeliaLux Spectrum Splitter Suitable adapter for operating two HeliaLux insert lights on the HeliaLux SmartControl. With the HeliaLux splitters, you operate two HeliaLux insert lights on the HeliaLux SmartControl. The watertight safety closures meet the highest demands in terms of safety. Thanks to the user-friendly plug-in device, the installation between the light and the controller is easy and understandable. HeliaLux SmartControl + HeliaLux Spectrum Splitter + 2x HeliaLux Spectrum (4 colors)

Smart Control SC16 3-channel for matrix & pendix With the Smart Control SC 16 from daytime you can simulate sunrise and sunset, cloud & thunderstorms. This control system offers everything that is currently possible at the Martk. Load capacity: max. 240 watts (programming and control with smartphone or tablet possible) Sunrise, sunset, morning & evening red, noon lowering, etc. - Simulation natural lighting conditions and changes by up to 10 freely programmable switching or dimming times Safe and comfortable programming via smartphones and tablets with Android and iOS operating system Dimming with almost no "jumps" over the entire brightness course Individually adjustable light scenarios for every day or night time Clouds and Thunderstorms - Random Weather Simulation can be turned on or off for any time of the day or night. 3 intensity levels selectable Programming in tabular form - clear and compact Demonstration operation with constantly changing scenarios Manual changes of lighting conditions in real time via sliders "Slider" Cloud flight and lightning at the push of a button - manually triggered weather simulation Professional plug-in system Fa. Binder "Plug & Play" control is simply plugged in between converter and luminaire, even later! Operation of luminaires of daytime® lines matrix & pendix with up to 240W (24 matrix LED modules) Parallel operation and combination of luminaires of all daytime® lines with optionally available power expansion module SEM16 in the corresponding design Software update via app (only iOS) from the comfort of your home

Timer Mechanical for aquariums or terrariums childlock easy and fast programming for 24h up to 48 switching options per day, every 15 minutes maximum load: 10 (4) A / 2400 watts White for aquariums or terrariums and other bulbs

LED Solar Hanging A kit to hang up JBL LEDs. It includes 2 screws and dowels as well as two 150 cm stainless stell threads to easily hang your LEDs. For hanging a JBL LED SOLAR lamp (natural or effect) from the ceiling Attach the stainless-steel cable to the designated point on the JBL LED SOLAR lamp, fasten the special brackets to the ceiling and hang down to the desired length. Shapely (rustproof) stainless-steel cables, each 150 cm long, can be shortened Easy to install in just a few minutes by simply attaching to the luminaire and to the ceiling with special cable holders Scope of delivery: 2 dowels & 2 screws with 2 special sockets (for ceiling), 2x 150 cm stainless-steel cable

LED converter to matrix The converter is the engine of every lighting. Different power levels between 40 and 240 watts are available for the daytime LED light. The distributor supplies 2 matrix LED luminaires with a converter at the same time. It is always important to ensure that the total power of the lights does not exceed the rated power of the converter used. The maximum allowable power is 240 watts (regardless of the number of occupied seats). Converter, distributor and LED light are safe to connect without tools via a plug-in system.Item No. rated capacity Art.-Nr. Nennleistung 41-0012 40 Watt 41-0013 60 Watt 41-0014 90 Watt 41-0015 120 Watt 41-0016 180 Watt 41-0017 240 Watt