SuperFish Digi Test pHDigital ph meter for aquariums and pond water. This digital meter measures ph with an accuracy of up to 0.02 units, has an automatic calibration function and makes measuring ph much easier.Accurate pH meter for aquariums and. pond water.Measures pH from 0 to 14 with an accuracy of up to 0.02 units.The device features an automatic calibration function for 1-point (6.86) and 2-point calibration (4.00 - 9.18).Calibration powder is included.Automatic power off after 5 minutes.UseRemove the protective cap before use.Press the power button. Submerge the pH meter up to the Immersion line into the water. The meter is NOT waterproof, never immerse the Never immerse the meter beyond the immersion line. beyond the immersion line into the water.Wait about 30 seconds until the reading is numerically constant.Read the pH of the water.Rinse the electrode with distilled water. rinse, dry with a cloth and put the protective cap.Avoid heat and direct sunlight. 1-point calibration 6.68 The calibration accuracy is ± 0.1 pHDissolve the pH 6.86 buffer powder in a beaker with 250 ml of distilled 25°C warm water.Dip the pH measuring instrument into the water with the pH 6.86 solution and wait about 30 seconds.Press and hold the CAL button for 5 seconds.The display will begin to flash 6.86. When it stops flashing, the pH meter has been calibrated.Rinse the electrode with distilled water. rinse with distilled water, dry with a cloth and put the Put on the protective cap. 2-point calibration 4.00 and 9.18 The calibration accuracy is ± 0.02 pHDissolve the pH 4.00 buffer powder in a beaker with 250 ml of distilled 25°C warm water. Dissolve the buffer powder pH 9.18 in another beaker.Dip the pH meter into the water with the pH 4.00 solution and wait about 30 seconds.Press and hold the CAL button for 5 seconds.The display will begin to flash 6.86.Press the CAL button briefly immediately.The display will flash 4.00. Wait until the flashing stops.Rinse the electrode with distilled water. water.Now immerse the pH meter in the Water with the pH 9.18 solution and wait about 30 seconds.Press and hold the CAL button for 5 seconds.On the display begins to flash 6.86.Press the CAL button immediately briefly.On the display flashes 4.00. Press the CAL button again immediately.On the display now flashes 9.18. If it stops stops flashing, the pH meter is calibrated.The electrode with distilled water Rinse with distilled water, dry with a cloth and put the protective cap on.Care: Keep the electrode clean and dry. Always close the meter with the protective cap. Warranty 1 year manufacturer's warranty. Damage due to improper use (battery leakage, water damage) is not covered. Lift the proof of purchase for proof of warranty. for proof of warranty. The warranty will be voided without proof of purchase! The batteries supplied free of charge have a life of one year. If they are empty at the time of the empty, you must replace them yourself. replace them yourself.

SuperFish Digi Test EC-TDS3-in-1 TDS meter with plug&play function. High performance and fast test results.SuperFish Digi Test EC-TDS. Accurate 3-in-1 TDS meter for. Aquarium and pond water.Measures 3 different values: conductivity (EC), total dissolved solids (TDS) and. Temperature in Celsius (°C) and Fahrenheit (°F).Calibration is not required.The meter has an automatic Temperature compensation function.Automatic shutdown after 5 minutes. UseRemove the protective cap before use.Press the on/off button.Submerge the EC-TDS meter up to the Immersion line into the water. The meter is NOT waterproof, never submerge it beyond the immersion line into the water.The test results are saved automatically after 5-10 Seconds automatically saved. To achieve a better temperature measurement, press CLEAR and repeat the Test. The test results can also be stored by Pressing HOLD to save.Take the meter out of the water, to read the test results.Press the MODE button to toggle between the test modes (ppm, μS/cm, °C and °F).Pressing the CLEAR button will clear the test results are cleared for a new measurement.Wait 30 seconds before starting a new start a new measurement.Wipe the electrode clean, switch off the turn off the meter and replace the protective protective cap back on.Avoid heat and direct sunlight.Care : Keep the electrodes clean and dry. Always close the meter with the protective cap. Please note!  The color change of the display (green/red) has no meaning..

PROCRISTAL UV-CCrystal clear and healthy waterPoor lighting conditions, over-fertilization or even an excess of nutrients can have a negative effect on aquarium water and promote algae. Suspended algae lead to green turbidity, bacteria to whitish turbidity. The JBL Water Clarifier removes turbidity caused by bacteria and suspended algae. The aquarium water is passed through the stable, UV-resistant housing of the clarifier. The UV-C radiation kills the bacteria, other germs and suspended algae in the water flowing through. The efficiency of this UV-C water clarifier is particularly high because the glass bulb is surrounded by a polished, reflective stainless steel foil that reflects the UV-C radiation, thus doubling the efficiency. This can also have a positive effect on the elimination of sessile algae, such as filamentous algae, as their spores are also largely killed.No harmful side effectsNo change in water values / no negative effects on important cleaning bacteria in the filter.Easy installationConnect the water clarifier to the external filter or a separate water pump. Due to included 90° angle, any desired installation position can be achieved.SafetyThe JBL UV-C water clarifier is TÜV-tested and has a safety switch for automatic shutdown when the device is opened. The housing is UV-resistant and sturdy walls and has an LED lamp that indicates whether the UV-C burner is working .Difference from the previous model JBL ProCristal UV-C Compact:The function indicator lights are now located on the flat side of the electrical unit and the microswitch for automatic shutdown of the burner when the housing is opened (if the plug has not been pulled out) is changed to a magnetic safety switch. As a result, the electrical units of the previous models (Compact) do NOT fit the new ones (Compact Plus) and vice versa. Crystal clear and healthy water: 36 W UV-C water clarifier for fast and efficient removal of greenish and whitish turbidity in freshwater and saltwater aquariums as well as garden ponds.Space-saving installation: connection to external filter or separate pump. Inlet/outlet opening mounted in a practical way. Shortest installation length: 61 cmPartial disinfection up to 3000 litres aquarium (pump max. 1000 l/h) /30,000 l pond (pump max. 4000 l/h), against floating algae up to 800 l in aquarium (pump max. 1000 l/h) /up to 8000 l pond (pump max. 4000 l/h)TÜV tested, safety switch: automatic switch-off of the UV-C burner when the unit is opened. Sturdy, UV-resistant housing, 2-glass constructionScope of delivery: Complete UV-C unit, 5 m cable, UV-C burner 36 W, base: 2G11, wall bracket, V2A screws, hose connection sleeves for 12 to 40 mm hoses. Warranty: 2 (+2 years if the product is registered)

Söchting oxidizer DThe Söchting Oxydator D produces normal and activated oxygen in a patented process using the Söchting Oxydator solution and special ceramic catalysts. The activated oxygen breaks down toxins and putrefactive substances, thus improving the water quality and contributing to the well-being of fish and plants. The Oxydator Mini is designed for aquariums up to 100l. The catalyst is already included in the delivery. You have to buy the necessary solution. We recommend that you use the 6% solution for the Oxydator D. If you use a stronger solution, dilute it only with distilled water. Foreign substances must also not be added to the solution. In tanks that have been used for a long time and have a high dirt deposit in the substrate, the Oxydator initially triggers a strong development of carbon dioxide, which will subside again as soon as the activated oxygen has worked off the reducing substances. Until then, please leave the previously used aeration in operation to expel the excess CO₂. In plant-free tanks, the CO₂ must, of course, be permanently expelled.Does not need electricity to run.Refillable.Easy to install and maintain.Produces active oxygen for fish and plants.100 l aquariums.If the oxydator is damaged, there is a risk that the H2O2 will leak and this is toxic to the animals, so check regularly.

Söchting oxidizer MiniThe Söchting oxidizer Mini produces normal and activated oxygen in a patented process using the Söchting oxidizer solution and special ceramic catalysts. The activated oxygen breaks down toxins and putrefactive substances, thus improving the water quality and contributing to the well-being of fish and plants. The oxidizer Mini is designed for aquariums up to 60 liters. The oxidizer solution and the catalyst are already included in the delivery (2 x 50 ml).The water temperature indicates the operating time of the catalysts, at 25 degrees Celsius and one catalyst it is approx. four weeks. With two catalysts, it is approx. two weeks. At a higher temperature, the operating time is shortened and vice versa. Because of the drip-wise dosing, at times no oxygen bubbles are visible, although the unit is working. When the glass container is empty, the oxidizer must be refilled. It is best to do this only with the oxidizer solution, which you can buy again. If the oxidizer has been placed on a sandy soil, you should move it occasionally so that the soil under it does not become gammy.Does not need electricity to run.Easy to set up and maintain.Refillable Produces active oxygen for fish and plants.60 l aquariums.If the oxidizer is damaged, there is a risk that the H2O2 will leak out and this is toxic to the animals, so check regularly.

Söchting Oxydator WThe Söchting Oxydator W produces normal and activated oxygen using a patented process using the Söchting Oxydator solution and special ceramic catalysts. The activated oxygen breaks down toxins and putrefactive substances, thus improving the water quality and contributing to the well-being of fish and plants. The Oxydator W is designed for ponds up to 4000 litres. The catalyst is already included in the delivery. You have to buy the necessary solution. Foreign substances do not get into the solution. In winter it continues to work reliably even under a closed ice cover and brings oxygen down to the bottom where the fish stay over winter. An oxydator works with the oxydator solution as an oxygen carrier and with the catalyst to remove the oxygen. Catalysts last for several years and must first be replaced when their activity decreases significantly. This oxydator releases a total of as much oxygen as 20,000 litres of dissolved water and is sufficient for garden ponds up to approx. 4000 litres. In heavily polluted water or in larger ponds, it also brings about a great improvement in quality, but the dosage may then no longer be sufficient to prevent the occurrence of floating algae in particular. In this case, another device should be used. The higher the water temperature, the higher the oxygen demand of the organisms in your water. This law is followed by the release of oxygen by the oxydator. While one filling lasts 4-5 months in winter, it can be used up after just one warm summer month. When it needs to be refilled, you will see that the oxydator swims up to the water surface on its own. When this happens, wash out the ceramic cup with the solution and check for ice residue if necessary. If you have a strong OXYDATOR solution, first dilute it with distilled water. If the OXYDATOR remains under water for an unusually long time, you should take it out of the pond yourself. For further instructions and start-up, please refer to the instruction manual.    Does not need electricity to run.    Refillable.    Easy to install and maintain.    Produces active oxygen for fish and plants.    4000l pond.If the oxydator is damaged, there is a risk that the H2O2 will leak out and this is toxic to the animals, so check regularly.

Oxidizer Ceramic CatalystAn OXYDATOR catalytic converter, suitable for all models of the Söchtige Oxydatoren series. These ceramic catalysts only work with Söchtige Oxydatoren.

Söchting oxidizer DThe Söchting Oxydator A produces normal and activated oxygen in a patented process using the Söchting Oxydator solution and special ceramic catalysts. The activated oxygen breaks down toxins and putrefactive substances, thus improving the water quality and contributing to the well-being of fish and plants. The Oxydator A is intended for aquariums up to 800 litres. The catalyst is already included in the delivery. You have to buy the necessary solution. Foreign substances are also not allowed in the solution. In tanks that have been used for a long time and have a high dirt deposit in the substrate, the Oxydator initially triggers a strong development of carbon dioxide, which will subside again as soon as the activated oxygen has worked off the reducing substances. Until then, please leave the previously used aeration in operation to expel the excess CO₂. In plant-free tanks, the CO₂ must of course be permanently expelled. You can determine how long the operating time of your oxydator is based on the amount of water, catalysts and the solution you need. You can determine how long your oxydator will run in the instructions for use.Does not need electricity to run.Refillable.Easy to install and maintain.Produces active oxygen for fish and plants.800 l aquariums.If the oxydator is damaged, there is a risk that the H2O2 will leak and this is toxic to the animals, so check regularly.

OXIDIZER mini solutionThe Oxidizer solution for the "OXYDATOR Mini".

OXYDATOR solventThe Oxydator solvent is available in 6 and 12%.For Oxydators A, D and W and should be dosed accordingly depending on the model.

Microbe-Lift KH Booster 250gThe KH Booster has been specially developed to adjust the carbonate hardness (KH) in marine and freshwater aquariums. The KH Booster contains a special mixture of various elements that ensure healthy coral growth in marine aquariums. In addition, the targeted increase in carbonate hardness supports nitrification in the aquarium. In combination with the Microbe-Lift care products, the required water values can be adjusted in no time at all.Optimal, targeted increase in carbonate hardness (KH)For marine and freshwater aquariumsSupports healthy coral growthPromotes nitrificationTargeted increase of the KH value in marine and freshwater aquariumsEasy dosage with enclosed spoonSpecial formula supports coral growth

Microbe-Lift Phosphate Remover / Phosphat-Entferner Ein einzigartiger Phosphat-Entferner für den Einsatz in Süss- & Meerwasseraquarien.Entfernt auf Bio-Polymerer Formel schnell und sicher Phosphate dauerhaft und verbessert dadurch die Wasserqualität nachhaltig ohne Auswirkungen auf den pH-Wert.Funktionen und Vorteile:- Entfernt Phosphate schnell, sicher und dauerhaft.- Verbessert die Wasserqualität- Unbedenklich für Fische und Korallen- Bio-Polymere Formel- Keine Auswirkung auf den ph-WertAndauernd hohe Phosphatwerte deuten meistens auf Phosphatdepots in Bodengrund und Gestein hin. Diese sollten durch den Einsatz des Gravel&Substrate Cleaners aufgeschlossen werden, damit sie durch den Phosphat Remover schnell, sicher und dauerhaft entfernt werden können*.*Nur frei gelöstes Phosphat im Wasser ist durch Phosphatadsorber entfernbar.Dosierung:Süsswasser-Aquarien:Geben Sie alle 2 Tage 2 ml auf 60 Liter hinzu bis der gewünschte Phosphatwert erreicht ist.Meerwasser-Aquarien:Geben Sie alle 2 Tage 1-2 ml auf 60 Liter hinzu bis der gewünschte Phosphatwert erreicht ist.

Auch in gut gepflegten Aquarien kann gelegentlich eine unansehnliche Trübung des Wassers auftreten. Mögliche Ursachen sind beispielsweise eine Kalkausfüllung durch hohe Gesamt- und Karbonathärte, aus dem Filter geschwemmte Mikroorganismen, eine versehentliche Überfütterung oder durch wühlende Fische aufgewirbelter Mulm. Bei lästigen Trbungen des Aquarienwassers schafft sera aquariaclear schnell, einfach und zuverlässig Abhilfe: Es bindet alle Trübungen im Süsswasseraquarium und macht das Aquarienwasser in kurzer Zeit kristallklar. Die gebundenen Partikel werden in wenigen Minuten vom Filter erfasst. sera aquariaclear wirkt rein biologisch und ist frei von schädlichen Wirkstoffen.

Eheim UV - C lamp 11 Watt Replacement UV - C lamp to Eheim reeflexUV 800  

Tetra ToruMin Stellt naturidentisches Schwarzwasser her. besteht aus natürlichen Torfextrakten fördert Farbenpracht und artentypisches Verhalten der Fische durch Bio-Aktivstoffe erleichtert die Zucht und Pflege empfindlicher und wertvoller Zierfischarten aus typischen Tropengewässern (Schwarzwässer) hemmt bei regelmäßiger Anwendung die Algenbildung - das Wasser wird bräunlich-kristallklar gefärbt und somit der Lichteinfall reduziert verbessert Pflanzenwachstum durch ausgewählte Makro- und Spurenelemente enthält Gerbstoffe, Huminsäuren und Wachstumsregulatoren einzigartiges, besonders umweltverträgliches Herstellverfahren für Süsswasseraquarien

JBL Florapol - Long-term nutrient substrate concentrate Long-term supply for the substate: long-term substrate fertiliser for freshwater aquariums Nutrient depot: contains all important plant nutrients such as iron and clay, stores nutrients and releases them as required Optimal promotion of plant growth means less algae growth. No phosphates and nitrates Use when setting up a new aquarium: mix nutrient substrate concentrate with substrate, cover with a layer of washed gravel/sand Contents: 1 packet Florapol. Effective for a minimum of 3 years Nutrition for aquarium plantsHealthy plants are important for every aquarium. Plants supply the aquarium with vital oxygen for the aquarium dwellers, prevent algae growth and remove pollutants.Healthy plants = healthy fishHealthy plants prevent algae growth, supply oxygen, remove pollutants, provide hiding places and reduce pathogens.For the plants to flourish the following demands need to be met:Light as energy source for the photosynthesis of CO2, nutrients and trace elements as growth promoters.With JBL fertilisers you supply the plants with all main nutrients and essential trace elements. This way the plants get all the required nutrients they need to absorb over the leaves and roots to prevent deficiency symptoms (e.g. iron deficiency).

sera bio nitrivec - Biologically healthy aquarium water Sera bio nitrivec, a product of sera biotechnology, removes ammonium and nitrite through the contained cleaning bacteria. The contained mineral volcanic rock removes pollutants, effectively binds opacities and provides settling areas for the cleaning bacteria. In the volcano rock, calcium, potassium and magnesium are stored - indispensable minerals that are constantly consumed in the aquarium. For healthy, clear and biologically active water.

Sanital multipurpose aquarium salt with aloe vera This product works much like ectozone.The Sanital multipurpose aquarium salt with aloe vera by Tropical was specially developed for the prophylactic use and preparation of baths, for fish after transport or during the acclimatization period. Active substances accelerate recovery and treat ionic disorders caused by unfavorable environmental factors. Aloe vera accelerates the formation of new epidermis and stimulates the immune system. The liquid blue UV filter gives the water a sky blue color and prevents algae growth. Sanital can be used after every water change or when needed. Its natural ingredients make it harmless to fish and the environment. Sanital multi-purpose aquarium salt can be used for freshwater and saltwater aquariums. Available in 3 sizes: 100ml 500ml 1000ml

JBL FilterBoost - Bacteria to enhance the filter performance for freshwater and marine aquariums Optimises the filter performance and prolongs the intervals between filter cleaning. For setting-up new aquariums and after water changes and fish diseases for freshwater/marine aquariums, turtle and shrimp tanks Put the granulate into the pre-filter or the first filter stage of your internal or external filter Sludge breakdown by pure bacteria cultures. No clogging of filter materials. The filter needs cleaning less often Bacteria activated granulate: sufficient for 5 - 6 l filter volume Package contents: 1 pack FilterBoost, 25 ml. Use: 25 g/5 - 6 l filter volume Nature at Home – Home for fish and plantsFish and invertebrates need to feel as much at home in the aquarium as in the wild Transform your aquarium water into biotope-like water to protect your aquarium dwellers. FilterBoost promotes the breakdown of organic sediments, reduces the slime formation and prolongs the filter cleaning intervals.Advantages of JBL FilterBoostIt prevents the filter from becoming clogged from the start – the filter material needs cleaning less often.

Tetra Bactozym Sorgt für sofortige Bioaktivität in Filter und Aquarium. bewirkt den enzymatischen Abbau organischer Verunreinigungen verbessert die Wasserqualität und sorgt für klares Wasser unterstützt und beschleunigt den Abbau von Ammoniak und Nitrit durch Aktivierung der nitrifizierenden Bakterien bei Neueinrichtung eines Aquariums können Fische bereits nach 24 Stunden eingesetzt werden Wasser- und Filterwechsel sind ohne gravierenden Verlust der Bakterienaktivität durchführbar durch Arzneimittel geschwächte oder geschädigte Mikroorganismen werden wieder revitalisiert Für Süß- und Meerwasseraquarien geeignet

The Dennerle Nano Complete Care for at home consisting of: Nano Water 15ml Nano Daily Fertilizer 15 ml Nano Crusta-Fit 15ml  

Microbe-Lift Nite-Out II - Starterbakterien Die Kulturen von Nite-Out II enthalten lebende Nitrifikanten, um die toxische Wirkung von Ammonium/Ammoniak und Nitrit im Aquarium zu beseitigen. Somit wird die Startphase eines Aquarium biologisch auf ein Minimum reduziert. Nite-Out II erzielt in Kombination mit ML/Special Blend eine natürliche, sichere und schnelle Startlösung für neue Aquarien. Funktionen und Vorteile: Schnelle und sichere Einfahr-Phase für Aquarien Entfernt Ammonium/Ammoniak und Nitrit Verhindert Ausfälle durch hohe Ammonium/Ammoniak Werte Effektive Bakterien Besiedelung im Aquarium durch lebende Kulturen Enthält Stämme von Nitrosomonas, Nitrospira und Nitrobacter Enthält lebenden Kaltwasser Bakterien welche deutlich effektiver als handelsübliche Bakterienpräperate arbeiten Keine Chemie - wirkt rein biologisch Die nitrifizierenden Bakterien von Nite-Out II enthalten Stämme von Nitrosomonas, Nitrospira und Nitrobacter. Nitrosomonas oxidieren Ammonium/Ammoniak zu Nitrit und Nitrobacter und Nitrospira oxidieren Nitrit zu Nitrat.Empfohlen für die Verwendung mit allen Microbe-Lift Produkten.Dosierung:Neue Aquarien:Geben Sie jeden zweiten Tag einen TL (5 ml) auf 40 Liter hinzu, bis die Nitrit- sowie Ammonium- /Ammoniakwerte akzeptabel sind.Wartung und Pflege:Geben Sie einen TL (5 ml) auf 40 Liter hinzu, wenn Sie einen Wasserwechsel durchführen oder neue Tiere einsetzen.

Microbe-Lift Gel Filter - Filterstarter Ein patentiertes Filtergel für den Einsatz in Meer- & Süßwasser Aquarien. Es haftet durch seine speziell entwickelte Konsistenz direkt am Filtermaterial, womit sich die Bakterien dort schneller ansiedeln und vermehren können. Dies verkürzt die Einfahrzeit von Filtern um bis zu 80% und sorgt somit für eine schnelle biologische Aktivität.Funktionen und Vorteile:- Einfache Handhabung bei verschiedenen Filtermedien- Enthält natürliche Bio-Polymere für das Ansiedeln der Bakterien am Filtermaterial, wodurch sich die Einfahrzeit bis zu 80% reduziert.- Stabilisiert das Wasser schnell und beugt nach der Reinigung oder dem Tausch der Filtermedien einer Instabilität vor.- Einzigartige Möglichkeit bei Schwerbelastung (Medikamenten) einen Filter biologisch schnell zu beleben.- Verringert das Verschmutzen von Filtermedien durch schnelleren Abbau von organischem Abfall.- Verlängert die Standzeiten von Filtern erheblich.- Fördert den Nitrat-Abbau im Filter und sorgt für eine geringere Wasserbelastung.Microbe-Lift / Gel Filter ist eine patentierte Neuheit im Berech der Biotechnologie. Es ist das erste Produkt, welches die Bakterien am Filtermaterial hält auf dem sie dosiert werden sollen.Dosierung:Tragen Sie ML/GF gleichmäßig in Linien oder Punkten direkt auf das Filtermaterial auf. Die Dosierung richtet sich nach dem Filtermaterial. Bei porösem Filtermaterial wird empfohlen, das Filtergel 15 bis 30 Minuten einwirken zulassen bevor Sie es in den Filter geben. Wiederholen Sie die Anwendung bei jeder Filterreinigung oder bei der Zugabe von neuem Filtermaterial.

JBL Denitrol - Bacteria starter for adding aquarium fish to freshwater and saltwater aquariums For aquarium water to suit both fish and plants when setting up a new aquarium, water changes and after fish diseases for freshwater and saltwater aquariums, turtle and shrimp tanks Shake the bottle well, measure the right amount in the dosing lid and evenly distribute in the aquarium Live bacteria with enzymes for the rapid breakdown of pollutants breakdown of fish excrement and other waste by means of special enzymes and cleansing bacteria